Error in Partials for new dimension values

Hello everyone,
I was trying out partial update for the first time on our index. ADDS, UPDATES, DELETES everything works out fine. The only error we are seeing is when an ADD or UPDATE has a new dimension value in it, the following error shows up:
*DGRAPH {dgraph,update} Record change references unknown dimension value id 4294428511 [recspec=`P_RECORD_SPEC:GS1001B101508E']*
This is what I observe:
~ data/state/autogen_dimensions.xml has the entries for this dimension after partial forge is completed
~ the forge output files SomeName--sgmt0.records.xml has the entries for this dimension
My thinking is the new dimensions collected in autogen-dimensions.xml during the partial are not available to the dgraph when the update is run. Am I missing any steps? Can you please point me the right direction. Please let me know if you need additional information on my setup.
[Product: Endeca Information Access Platform version 6.1.4.530518 (analytics enabled)]
Regards.
Pankaj.

Can you share your XML record manipulator where you tag each record with the update action? This would be a place where you would see:
<EXPRNODE NAME="ACTION" VALUE="ADD_OR_REPLACE"/>
The missing piece might be: <EXPRNODE NAME="DIM_ACTION" VALUE="ADD"/>
The latest documentation has a good, dedicated partial update guide.
[MDEX 6.3.0 Partial Update Guide|http://docs.oracle.com/cd/E35825_01/MDEX.630/pdf/PartialUpdatesGuide.pdf]

Similar Messages

Rollup for new dimension values.

hai,
i've created some dimensions and variables and added values to them.set the hierearchies and performed roll-up for the corresponding variables.Everything was OK then.
But when i add new values to the dimension at various levels , set the hierarchial information for them and stored the variable values for the lowest level i want to perform roll-up for the newly added values only instead of performing roll-up for the whole data.
Any suggessions or guidelines are welcome.
Thanks and regards.

If you know exactly values you've added to dimention (for example there are days for new month, new department, e.t) you should limit dimention to those new values and execute ROLLAP or AGGREGATE command. In case AGGREGATE you can correct and recompile aggregation map to include only new added values. You can experiment with AGGREGATE() function to aggregate data on fly, but I've experienced very bad perfomance in case big variables .

Partial Update - Unknown Dimension Value ID

Hello Old Endeca Friends,
I am getting a lot of these sorts of errors when I perform a partial update:
ERROR 04/25/13 16:56:21.115 UTC (1366908981115) DGRAPH {dgraph,update} Record change references unknown dimension value id 4294484500 [recspec=`UPI:100224148']
I am using MDEX 6.4 and PS 6.1.3. The dimension value ids in question seem to be in the autogen_dimensions.xml, but the dgraph doesn't seem to recognize to know about them. Why?
Any further insight would be appreciated. "Just run a baseline" is not a good answer, I need to do partials every hour throughout the day.

Thanks for the input, everyone.
It looks like my issue was that my state file had a set of updated dimensions but my dgraph did not.
I had a baseline extract with properties X, Y and Z (let's say) and I was adding in new dimensions A and B. I moved my state files from my test environment to my production environment with entries on dimensions A and B. I started getting partial data for dimensions A and B and processing it. However, my dgraph knew nothing about A and B. So, although forge created the dim vals fine and the state files were modified appropriately, my dim val updates and adds on my dgraph failed because my dgraph had never processed a baseline extract with dimensions A and B.
Once I ran a baseline with dimensions A and B, partial updates went fine and have now processed dozens without issue.
Unfortunately, I only get baseline data once a week, so it took me a bit of time to realize what was going on.

Error while creating a new Dimension/Model in BPC 10.0 NW

Hello Experts,
I am using BPC 10.0 NW system.
When I try to create new Dimensions or Models I get the following Error Message.
"Error in Admin module or a component used by Admin module.
Failed to create SAP NetWeaver BI InfoObject for dimension."
I am assigned to all the needed task profiles to create Dimensions and Models.
Please assist me to resolve this issue.
Thanks & Regards,
Archana

Thanks Roberto.
The error was coming because while creating the user id "SAP_ALL" Profile was not assigned. So I was not able to create Dimensions and models.
Now the issue is solved.

Variable to create new dimension value in Webi

hi There
in a webi report, i have couple of variables, what i need to do is to create a new dimension by these variables, so i can use it in a chart
for example:
i have current month, previous month, previous of previous month, all of them are variables, i need to create a new dimension, so i can use it in a crosstab to create a chart
thanks
Cleo

because the client needs 6 months trend report, and in webi level, it is hard to use the report date prompted by the user to calculate the 5 previous months, so in universe level, i create 5 objects to get 5 previous month of report month prompted by the user, for example, if the user input the report month ="3/24/2014", the previous month will be 2/1/2014, and previous previous will be 1/1/2014, then 12/1/2013, 11/1/2013, 10/1/2013
under each month, i will create 6 variables for another metric, say % medium error=total tickets opened where priority = medium, the reason, i create these fields manually, because not all of the month will have tickets opened by all support group, i know i can create a 6 months object in universe level, but if i add drill down filters, if the support has no ticket, the 6 months trend will be changed to 2 or 3 months, the user wants report layout has no change no matter if it will have data or not, that is why i create different variables for the month, and different variables for other metrcis. i already finished this table part, but the issue is i cannot use this table data to create a chart, so i need to creat new variables to include all these 6 months variables and metrcis "% medium error" variables
thanks,

MMM1061 error when creating a new dimension

why after i make a new dimension, there's always MMM1061 error notification like this : "MMM1061 : corrupted array : position msimatch at 2". what does it mean? how 2 fix it??
thx a lot guyz.....

Check if below helps
http://zimmergren.net/technical/sp-2013-duplicate-field-name-was-found-after-upgrading-your-sharepoint-2010-solutions
http://jshidell.com/tag/finding-a-duplicate-field-name-was-found-error-in-sharepoint-2010/
http://www.sharepointassist.com/2011/11/05/a-duplicate-field-name-x-was-found/

OAK3 error message - Specifications for the mean value methods incorrectly

Hello experts,
After golive of sap ECC system of our client, when the auditors check the consistency of depreciaion areas in transaction OAK3, the error message is appearing under the depreciation area 01 as "Specifications for the mean value methods incorrectly defined". Can anybody throw some light on how to encounter this error message?
Thanks

Hi,
1) Usually, the reason why the error occurs is that you have no area defined in the chart of depreciation.
2) Also please check the attached note 847289.
3) Please also run OIB5 and check if capitalization version is assigned to depreciation area 01
If you use capitalization versions it is necessary to have a depreciation area with area type 07 (Cost-acc. valuation) which
get the whole amounts.
The depreciation area which takes the values to 100 % must have the following features:
=> The currency of the depreciation area should have the currency of the controlling area
=> The depreciation area should have the depreciation area type "07 Cost-acc. valuation"
=> The area should not have a capitalization version
regards Bernhard

Error after creating a new dimension in dev studio

Hi,
I have set up ATG 10.1.2 along Endeca 3.1.1
For the CRS application the cartridges are shown properly.
But once I create an autogen dimension from dev studio and run the baseline the navigation cartridges disappear giving the below mentioned error.
error=com.endeca.infront.navigation.NavigationException: com.endeca.navigation.ENEException: HTTP Error 404 - Navigation Engine not able to process request 'http://localhost:15000/graph?node=10098&refinement=dimvalid:10093+dynrank:0+exposed:1&refinement=dimvalid:10001+dynrank:0+exposed:1&refinement=dimvalid:10002+dynrank:0+exposed:1&refinement=dimvalid:1+dynrank:0+exposed:1&refinement=dimvalid:10011+dynrank:0+exposed:1&groupby=product.repositoryId&offset=0&nbins=0&allbins=1&autophrase=1&autophrasedwim=1&filter=AND%28product.priceListPair%3asalePrices_listPrices%2cOR%28product.siteId%3astoreSiteUS%29%29&irversion=640'., displayNameProperty=displayName_en, dimensionId=10001, buryRefinements=[]}, {showMoreLink=false, sort=default, @type=RefinementMenu, boostRefinements=[], maxNumRefinements=200, numRefinements=10, displayNamePropertyAlias=displayName, name=Size, moreLinkText=Show More Refinements..., dimensionName=clothing-sku.size
I have also put the --back_compat flag as 640 but even then getting the same error.
Only the redeployment of full application removes the error.
Please suggest if anyone has faced similar issue.
Regards,
Varun

Please see the suggested solutions in the following docs.
Entity Maps Not Defined For Attachment Error When Selecting A Deliverable (Doc ID 358385.1)
Corrupt Personalization - No Entities Found Entitymaps Not Defined For Attachment Item (Doc ID 1085011.1)
R12:Supplier Page Unexpected Error: 'No Entities Found EntityMaps not Defined for Attachment Item' (Doc ID 1361320.1
Geography Hierarchy No Entities Found, EntityMaps Not Defined For Attachment Item (Doc ID 831088.1)
Depot Repair Bulk Receiving Error: "No entities found, entityMaps not defined for attachment item" (Doc ID 1357977.1)
Thanks,
Hussein

Error in LSMW for new matl-You have not fully maintained the descriptions

Hi Experts,
I am creating a LSMW to create a new material master, but at the end part get the error "You have not fully maintained the descriptions" Message no. MG171. I am using the Standard batch/direct input" and Program Name RMDATIND.
Can you please help me.
Thanks and Regards,
Amol Kale

Amol,
as description is mandatory field while creating material, you need to assign description text.
also check are you maintaining multiple langauges during this material xreation , if yes, you need to give discription for all langauges.
hope it will help you.
Thanks
Ritesh

Error in entering a new characteristic value using input ready row in WAD

Hi Guys,
I have created input ready query with input ready row option to enter both characteristic and key figure values. I have created info object without master data tick in Master data/text tab to enter free text which inturn will create a new record in master data. It is working in Bex analyzer, here I can enter any value to create a new entry in the master data but where as in WAD I am getting error message reading invalid values. In WAD I am restricted to choose only available master data entries. Do I miss any settings in WAD. Your help will be highly appreciated.

Hi,
the feature you are requesting is called "Master Data Planning". Unfortunately it is not supported by SAP. Please use the term "master data planning " to search this forum and you will find some threads about this issue.
Hope this helps
Matthias Nutt
SAP Consulting Switzerland

[SOLVED] GPGME error after chrooting for new installs

There is another thread about this topic, but it is marked as solved. But obviously this error is not solved because new installs are failing.
The problem: after installing the base system with pacstrap and chrooting into the system, there are some very ugly errors when trying to install any additional packages.
Pacman gives the following output:
warning: GPGME error: Invalid crypto engine
File XYZ is corrupted (invalid vor corrupted package (PGP signature)
Do you want to delete it?
Since i installed arch just a few days ago on the same system with different SSD, this error seems to come from the server side. But i am no expert at all, so i have no idea what's wrong.
I tried to delete the etc/pacman.d/gnupg folder and running pacman-key --init, but this is not working.
Last edited by tumas (2014-01-13 18:37:18)

Update the system from the install disk with pacman --root <mountpoint> -Syu. The problem is that you installed at exactly the wrong time, when all of the packages that use gcrypt were updated but libgcrypt wasn't.
Last edited by Scimmia (2014-01-13 18:29:37)

BOBJ - BW "Error getting hierarchies for dimension... "

Im still whitout a solution for this problem, however we have found a difference between the queries that work and the queries that dont work. The difference is in the hierarchies type but we dont know what is the problem exactly.
Does anyone know if there is an specyfic type of hierarchie that we need to use???
Regards

Hi,
I wonder why you are not using the BEx / BICS connection ? (instead of the old OLAP .unv)
the process flow for generating a universe would include the following SE37 function modules:
BAPI_MDPROVIDER_GET_CATALOGS
BAPI_MDPROVIDER_GET_CUBES
BAPI_MDPROVIDER_GET_DIMENSIONS
BAPI_MDPROVIDER_GET_HIERARCHYS
You should test these in BW .
It may actually be an authorization issue - perhaps your logon doesn't have infoobject authorizations for 0Plant?
Regards,
Henry
p.s. a quick Note search suggests : 1565615 - Error when creating a Universe from BEx: "A runtime exception has occurred. (Error getting levels for hierarchy ( dimension : Unknown error)"
--> "Business Objects Personalization objects" R21K900693 transport has not been loaded properly in the BW system, transaction STMS shows this trasport not loaded.

Create a new dimension in business layer from Data source: text file on the web

Hi,
I have a text data source which is published every few hours that is accessible from a certain URL. I follow the instruction given in this http://scn.sap.com/docs/DOC-43144 - where it shows in great detail how to create the connection, data foundation as well as business layer to create a universe for this type of data.
All is well - I can use this universe in my WEBI doc and display the data.
However, in order for me to merge the data from this universe with another universe, I need to create new dimension based on the data from the text file. The new dimension value is simply the first 4 characters of the Subject found in the text file. The "Subject" dimension is of variant type: varchar.
Following the guide mentioned earlier, the connection is using SAP BO OpenConnectivity driver. And this driver limits severely the SQL statement that I can use to extract a substring of another string. Here's the screenshot of the SQl expression that I can use with this driver
After hours of searching, I cannot find any other connection driver for a text file that's published on a certain URL. The BO OpenConnection driver is the best that I could find.
So here are my problems
1. one of my data source is a text file published on a web
2. the only connection I can create does not allow me to create new dimension in the universe to create an important column "subject ID"
3. I can create the column in webi as a variable. But when I do so, I cannot merge it with existing dimension (webi not allowing to merge these 2 types). And without the merge, the flat file universe with my database universe can't be combined.
I'm using WEBI Rich client version 4.1 SP3 Patch 1. Build 14.1.3.1300
Is there any other idea that you can suggest without requiring to change the extracted data?
Thanks.
With warm regards

Hi Bala,
Were you able to find out a solution for the problem with uploading values for a variable from a text file on the web? I am confronted with the same request from users.
Thanks,
BQ

Dynamic setting of the dimension values.

Summary:
How can I programmatically control the dimension values displayed in ‘Selected’ window of ‘Edit worksheet’ wizard. of Oracle BI Discoverer plus for OLAP 10.12.48
My objective is to dynamically set the dimension values for a particular dimension based on some criteria.
Requirement:
1.The user should be able to select one of the pre-defined options.
2.Based on the option selected by the user, the necessary business logics need to be applied and then resets the dimension values. The ‘Selected’ window of ‘Edit Worksheet’ should be refreshed.
3.Based on the option the short description & long description should be changed
Existing Application Implementation:
We already implemented this logic in oracle express 6.3.4 as follows.
1.Radio buttons are provided to select the display option
2.Whenever the option is changed, a program is executed in the Express objects. This program evaluates the option, applies the necessary business logics and displays the dimension values based on the option chosen. View is then refreshed to reflect the new dimension values. Note that this process does not affect the total “available dimension” values. The total number of “available dimension” values remains the same. It just manipulates the values in the ‘Selection’ object.
3.The formula of the short description and long description is modified. This formula checks the option and based on it changes the description
Issues I faced to Implement this logic in Oracle BI Discoverer plus for OLAP 10.1.2.48
1. No provision to add radio buttons, hence were trying to implement the functionality with a dimension.
2. No options available for applying business rule and setting the desired dimension values.
3. No ‘event’ available to refresh the views
How can I achieve this in Oracle 10g discoverer plus for olap 10.1.2.48
Thanks,
Natarajan

I think this is not possible.
When you give this settings while creating the SMARTForm, SMARTForm will generate a FM based on that settings. And it is not possible to change those settings at runtime.
We have some constriants like this for dynamic paradigm in SMARTForm. Like, we can provide shading or Box color for the cell.
Regards,
Naimesh Patel

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Error in Partials for new dimension values

Similar Messages

Maybe you are looking for