Error in Perform with SmartForms

I have a PERFORM statement in my SmartForms and I am getting an error as follows:
Error analysis
 An exception occurred. This exception is dealt with in more detail below
 . The exception, which is assigned to the class
 'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither
 caught nor passed along using a RAISING clause, in the procedure
 "CONVERT_TO_PALLETS" "(FORM)"
 Since the caller of the procedure could not have expected this exception
 to occur, the running program was terminated.
 The reason for the exception is:
 A PERFORM was used to call the routine "CONVERT_TO_PALLETS" of the program
 "ZRVADEK01".
 This routine contains 4 formal parameters, but the current call
 contains 6 actual parameters.
 parameters.
Below is the code in the SmartForm
*& Form CONVERT_TO_PALLETS
FORM convert_to_pallets
USING matnr
 lfimg
 vrkme
CHANGING w_nbrpal
 w_nbrpce
 w_nbrft2.
* Call form in external program
PERFORM convert_to_pallets IN PROGRAM zrvadek01
 USING matnr
 lfimg
 vrkme
 CHANGING w_nbrpal
 w_nbrpce
 w_nbrft2.
ENDFORM.
Following is part of the Form Routine in program zrvadek01
FORM convert_to_pallets TABLES inttab STRUCTURE itcsy
 outtab STRUCTURE itcsy.
I am confused by this error because I have 6 parameters (3 each of using and changing) both in the perform call and the form definition.
Regards,
Davis

Hi
This is something related to PERFORM and FORM statements
check them correctly
parameters passed to perform is not matching with the FORM parameters
Why 2 FORMs appearing in the code
one is
FORM convert_to_pallets TABLES inttab STRUCTURE itcsy
 outtab STRUCTURE itcsy.
and the other is

FORM convert_to_pallets 
USING matnr
 lfimg
 vrkme
CHANGING w_nbrpal
 w_nbrpce
 w_nbrft2.
but only one PERFORM
PERFORM convert_to_pallets IN PROGRAM zrvadek01
 USING matnr
 lfimg
 vrkme
 CHANGING w_nbrpal
 w_nbrpce
 w_nbrft2.
So which FORM it has to consider
why the first FORm is needed for you?
check and correct it.
Reward points if useful
Regards
Anji

Similar Messages

Error sending mail with Smartforms

Hi all,
I have a requirement which requires me to send an email with a smartform as attachment . But I am always getting an error .
The error is
X_ERROR.
I am using the Function Module SO_NEW_DOCUMENT_ATT_SEND_API1.
Kindly clarify to me as to why this error occurs.
Kindly reply immediately as this is bit urgent
Regards,
Vijay
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 2:31 PM

Hi Vijay,
I am attaching a PDF, hence i can't put the doc type you suggested. Anyway, I think the problem has nothing to do with the attachment. As the PDF I am attaching contains graphic, it was sent as a html mail by connecting to the content server. However the URL of the content server is not valid, hence connection error. It's pretty the same as how microsoft outlook works, where if you choose your mail as text, its pure text. That's the deduction I have at this point.
Thanks for you help.
Cheers,
Cady

System is giving ABAP run time error while perform LT06 or create TO with r

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
Short dump has not been completely stored. It is too big.
P_MENGA = P_MENGE.
007940 P_UMREZ = 1.
007950 P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

Hi,
Go to Tcode ST22 and mentione the dump code there and check.
Also take help[ of Abapers to fix it.
Thanks
Utsav

ABAP run time error while perform LT06 or create TO with respect to posting

Hi SAP WM Gurus,
System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
>> Short dump has not been completely stored. It is too big.
>       P_MENGA = P_MENGE.
007940       P_UMREZ = 1.
007950       P_UMREN = 1.
Can you give any idea on this issue.
Thanks and Regards,
SHARAN.

This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

Error in Communicating with DCA Server

Hi,
I have Cisco LMS 2.6 and next modules:
1. CiscoWorks Common Services 3.0.6
2. Campus Manager 4.0.13
3. CiscoView 6.1.5
4. Device Fault Manager 2.0.13
5. Internetwork Performance Monitor 2.6.0
6. Integration Utility 1.6.0
7. Resource Manager Essentials 4.0.6
Windows Server 2003 SE SP2
I have some problems:
1)
When I try enter to Device and Credentials I get message "Error in communicating with DCA Server.
DCA Server may be down. Please start the DCA Server and then refresh the page."
I try to restart CiscoWorks Daemon Manager over Services.
I cannot get information a lot of time from command "pdshow". Only black screen on the window CMD.
Or I get error
C:\Documents and Settings\zykov>pdshow
ERROR: GetReply failed:
ERROR: Daemon Manager startup in progress. Please wait.
dcr.log
[ Чт фев 18 16:51:28 YEKT 2010 ] [Ajp13Processor[9009][4]] FATAL com.cisco.nm.dcr.DCRProxy - Error in Communication to DCRServer , Reason :DCRException ID - -202 : CSTM Error Code [-1] CSTM Comm Type [0] - Unknown exception before invocation
[ Чт фев 18 20:32:35 YEKT 2010 ] [Ajp13Processor[9009][3]] FATAL com.cisco.nm.dcr.DCRDatabaseAccess - Severe error in DCRDatabaseAccess initialization - JZ00L: Login failed. Examine the SQLWarnings chained to this exception for the reason(s). 0 JZ00L
[ Чт фев 18 20:32:35 YEKT 2010 ] [Ajp13Processor[9009][3]] FATAL com.cisco.nm.dcr.DCRSystem - Unable to Instantiate DCRDataManagement ObjectJZ00L: Login failed. Examine the SQLWarnings chained to this exception for the reason(s).
java.sql.SQLException: JZ00L: Login failed. Examine the SQLWarnings chained to this exception for the reason(s).
DCRServer.log
[ Thu Feb 18 21:10:41 YEKT 2010 ] Starting DCR Server...
[ Thu Feb 18 21:10:43 YEKT 2010 ] No restore has happened
dcrclient.log
[ Чт фев 18 20:50:49 YEKT 2010 ] [Ajp13Processor[9009][5]] FATAL com.cisco.nm.dcr.DCRProxy - Error in Communication to DCRServer , Reason :DCRException ID - -202 : CSTM Error Code [-1] CSTM Comm Type [0] - Unknown exception before invocation
2) When I run Alerts and Activites I get error "An exception occurred. Please check the AAD.log file for further details."
AAD.log
18-фев-2010|21:30:10.291|ERROR|AAD|Ajp13Processor[9009][3]|AFDLaunchAction|perform|.|Error in calling getPartitionNamePMServercom.cisco.nm.xms.ctm.common.CTMException: Read timed out/Error in received response Connection reset
3) On the window Home of Common Services I have message "JRM server is down or inaccessible for this user"
I try reinstall last modules Campus Manager 4.0.13,
Device Fault Manager 2.0.13,
CiscoWorks Common Services 3.0.6.
But it cannot help me.
I think that this problems related. Yesterday all works correctly.
Thank you for your help.

You are right the problem was related with antivirus.
After removal antivirus DCA Server started successfully.
Remains the question as to be without an antivirus program?
Also remains a problem in the window Alerts and Activites.
When I click on the Device Name field (for some devices) does not open Detailed Device View.
The window closes immediately after opening.

Error in communicating with DCR Server. in LMS 3.1

I am receiving this error when I try to ad device: Error in communicating with DCR Server.
DCR Server may be down. Please start the DCR Server and then refresh the page.
The DCRserver is running. ( I did restart it)
I am using Windows version of LMS 3.1
CiscoWorks Common Services 3.2.0 Licensed Not applicable
Campus Manager 5.1.4 Purchased 300
CiscoView 6.1.8 Licensed Not applicable
CiscoWorks Assistant 1.1.0 Licensed Not applicable
Device Fault Manager 3.1.3 Purchased 300
Internetwork Performance Monitor 4.1.0 Purchased 300
Integration Utility 1.8.0 Licensed Not applicable
LMS Portal 1.1.0 Licensed Not applicable
Resource Manager Essentials 4.2.0 Purchased 300
Health and Utilization Monitor 1.1.0 Evaluation(Expired) 100

Hi,
This issue most likely is related to a communication problem with the database or a corruption as we can see from the logs :
2010/11/21 19:44:41 main ani ERROR POStore: Failed resolving object because: java.lang.NullPointerException
2010/11/21 19:44:41 main ani ERROR AniMain: java.lang.NullPointerException
ANI Server failed to load from the database.
Please stop and restart the system. You may need to re-initialize the database.
If this does not work, please contact technical support.
The next step is to re-initialize the Campus Manager database. This procedure will delete all the records and maps that you have in Campus Manager, you would need to run a new Campus Data Collection and User Tracking Acquisition to have clean and fresh database information.
If that ok with you, you can try the below steps to re-initialize the Campus database. By doing this, it will not effect any other database of LMS will clean Campus Manager database.
+) Stop the daemon manager:
net stop crmdmgtd
+) cd CSCOpx\bin\
+) Type the following command (case sensitive):
perl dbRestoreOrig.pl dsn=ani dmprefix=ANI
+) Start the daemon manager:
net start crmdmgtd
Now, wait another 15 minutes and wait for dmgtd.lock file to release from location CSCOpx\objects\dmgtd\ready.
Now check the status of ANIServer with command :- pdshow ANIServer ( case sensitive)
it should have the status Busy with Flag set.
Thanks,
Gaganjeet

Getting Error while creating a SMARTFORM.

Hi All,
      i got these errors, while creating a smartform. Can anybody solve this.
TOT_TEXT        Field V_TOTAL has no defined value
GRD_TOTAL     Field V_GRANDTOTAL has no defined value
Thanks in Advance...
regards,
Chenna.

the txt fields are being created under a header which is not correct.
Try to include the Text under the Main header, or else under the loop.
can u send a screenshot of the problem? (expand all the branches, with error.)

Active failed. Communication error when performing integrations.

I actived an activity but the request failed. In the request log,the last rows indicated the reason,but I can't understand and don't know how to solve it. Below show the last rows of the log:
Change request state from SUCCEEDED to FAILED
Error! The following problem(s) occurred during request processing:
Error! Communication error when performing integrations. HTTP protocol error [reason: Parsing of the response body failed [reason: Comment must start with "<!--".]]. Request FAILED.
REQUEST PROCESSING finished at 2010-09-05 03:00:16.468 GMT and took 2 m 36 s 172 ms

I copied SCs' info from http://host:port/sap/monitoring/ComponentInfo below:
Software Components
Vendor Name Version Location Applied
sap.com WD-APPS 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227111730
sap.com WD-FLEX 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227114200
sap.com ENGINEAPI 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227104639
sap.com LM-MODEL-CE 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110643
sap.com LM-SLD 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111825
sap.com WD-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090714195600) SAP AG 20100227112212
sap.com WD-ADOBE 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227110000
sap.com EP-MODELING 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227113917
sap.com J2EE-FRMW 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227110242
sap.com ENGFACADE 7.11 SP3 (1000.7.11.3.0.20090707223600) SAP AG 20100227111458
sap.com ESREG-BASIC 7.11 SP3 (1000.7.11.3.1.20090819222300) SAP AG 20100227110634
sap.com CAF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227114351
sap.com ESF 7.11 SP3 (1000.7.11.3.0.20090716184100) SAP AG 20100227111734
sap.com CORE-TOOLS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112432
sap.com EP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112608
sap.com APP-LIB 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227105136
sap.com MOIN_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105811
sap.com LMNWABASICMBEAN 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112135
sap.com ESCONF_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227110749
sap.com VCFRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227111401
sap.com LMINTERNALAGENT 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110251
sap.com APP-LIB-BASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com ESI-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112458
sap.com WDEXTENSIONS 7.11 SP3 (1000.7.11.3.0.20090708083400) SAP AG 20100227114257
sap.com LMNWACDP 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112218
sap.com EP-CONNECTIVITY 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112502
sap.com LMNWAUIFRMRK 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com SERVERCORE 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110257
sap.com CE-RA-EDM 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227110932
sap.com EP-BASIS-API 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112504
sap.com ESMP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110214
sap.com ESREG-SERVICES 7.11 SP3 (1000.7.11.3.2.20091001033900) SAP AG 20100227112210
sap.com ESP_FRAMEWORK 7.11 SP3 (1000.7.11.3.2.20090914172400) SAP AG 20100227112151
sap.com VCKITBI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227113947
sap.com BI_UDI 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114349
sap.com VCFREESTYLEKIT 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227114146
sap.com EP-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090715192600) SAP AG 20100227114235
sap.com BI-BASE-S 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227114355
sap.com JSPM 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110220
sap.com UDDI 7.11 SP3 (1000.7.11.3.1.20090928214200) SAP AG 20100227110233
sap.com WSRM 7.11 SP3 (1000.7.11.3.0.20090708051400) SAP AG 20100227110903
sap.com UMEADMIN 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com SAP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112125
sap.com VTP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104841
sap.com J2EE-APPS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112629
sap.com MESSAGING 7.11 SP3 (1000.7.11.3.3.20090909003900) SAP AG 20100227114300
sap.com FRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090721210500) SAP AG 20100227114152
sap.com LMNWATOOLS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com CAF-MF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227111731
sap.com CAF-UI 7.11 SP3 (1000.7.11.3.0.20090708093200) SAP AG 20100227112401
sap.com SAPNWDEMO 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com MMR_SERVER 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114353
sap.com DI_CLIENTS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112503
sap.com UWLJWF 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227113931
sap.com VCBASE 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227112627
sap.com BI-WDALV 7.11 SP3 (1000.7.11.3.0.20090715032600) SAP AG 20100227111328
sap.com BI-WDEXT 7.11 SP3 (1000.7.11.3.0.20090708083300) SAP AG 20100227114258
sap.com SOAMONBASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com EP-ADMIN 7.11 SP3 (1000.7.11.3.0.20090726162100) SAP AG 20100227114239
sap.com EP-BASIS 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112829
sap.com LMNWABASICAPPS 7.11 SP3 (1000.7.11.3.0.20090727232800) SAP AG 20100227114323
sap.com LMNWABASICCOMP 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112449
sap.com LMCFG 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112609
sap.com LMCTC 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114321
sap.com NWTEC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112331
sap.com SR-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112359
sap.com BASETABLES 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112423
sap.com CFG_ZA_CE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227105952
sap.com LM-CORE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227111845
sap.com DI_CBS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111119
sap.com BRMS-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104935
sap.com XI_CNT_SAP_BASIS 7.11 SP1 (1000.7.11.1.0.20081108235600) SAP AG 20100226194653
sap.com BRMS-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105857
sap.com BPEM-CONTENT 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227111116
sap.com ADSSAP 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104529
sap.com BPEM-PP 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227110939
sap.com BPEM-HIM 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110948
sap.com DI_DTR 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110723
sap.com BPEM-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112433
sap.com BPEM-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227111735
sap.com SAP_XIGUI 7.11 SP3 (1000.7.11.3.2.20090819222300) SAP AG 20100227111517
sap.com SAP_XIESR 7.11 SP3 (1000.7.11.3.3.20091001183900) SAP AG 20100227111819
sap.com SERVICE-COMP 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112210
sap.com BPEM-WDUI 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112404
sap.com GP-VC 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112422
sap.com GP-PP 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227113936
sap.com GP-CORE 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112606
sap.com DI_CMS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114059
sap.com BPEM-MON 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112502
sap.com VOICERT 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227111455
sap.com BRMS-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227114147
sap.com IDEUPDSITECE 7.11 SP3 (1000.7.11.3.0.20090708112000) SAP AG 20100227104951
sap.com BPEM-FLEXUI 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104710
sap.com BPEM-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104645
sap.com VOICEVC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104733
sap.com IDEUPDSITETOOLS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112428
test.sap.com HM-WDUIDMKTSCNR 7.11 SP0 (1000.7.11.0.0.1268322642085) Local Workplace 20100324083612
test.sap.com HM-WDUIDMKTCNT 7.11 SP0 (1000.7.11.0.0.1268322933427) Local Workplace 20100324083656
test.sap.com HM-WDUIDMKTCORE 7.11 SP0 (1000.7.11.0.0.1268322880287) Local Workplace 20100324083659

*** ERROR = CONNECT failed with SQL error '12154' after Oracle Upgrade

Hello Experts,
Recently I upgraded my oracle database from 11.2.0.3 to 11.2.0.4.The upgrade completed successfully but I am unable to start the instance.
R3trans -d failing with the error--
OCIServerAttach(OCI_DEFAULT) failed with -1=OCI_ERROR
OCIServerAttach(OCI_DEFAULT) failed with SQL error 12154:
ORA-12154: TNS:could not resolve the connect identifier specified
OCIServerAttach(con=0, svc=069C1630): Error 12154 attaching new srv=069C17D0
OCIHandleFree(con=0): Server handle srv=069C17D0 freed.
server_detach(con=0, svc=069C1630; srv=NULL, stale=2)
OCIHandleFree(con=0): Service svc=069C1630 freed (i=1).
*** ERROR => CONNECT failed with SQL error '12154'
-->oci_get_errmsg (con=0, rc=12154)
OCIErrorGet() -> SQL error code: 12154; buflen=66
OCIErrorGet(): error text ->
ORA-12154: TNS:could not resolve the connect identifier specified
ocica() -> SQL error code 12154,12154
DbSlConnect(con=0) -> orc=12154, rc=99=DBSL_ERR_DB
***LOG BY2=>sql error 12154 performing CON
***LOG BY0=>ORA-12154: TNS:could not resolve the connect identifier specified
I have checked listener is up and running properly.Entry is maintained in tnsnames.ora.
Also kernel is upgraded with latest path.Curent kernel version--742
Please suggest on the mentioned error.I am attaching the logs here.Thanks in advance.
Best Regards,
Debaditya

Hi Debadiya
Kindly check this SAP Notes
1204916 - Error: "ORA-12154" when connecting to Oracle from a Windows 64-bit platform
2153975 - Database connectivity fails with ORA-12154
556232 - Environment settings for R/3/Oracle on Windows
443867 - ORA-12154 Collective SAP note
BR
SS

Firefox Version 27 Reporting Services Action Menu Error. An error has occurred with the data fetch.

Hello, since I've updated to Firefox 27.0.1 on Windows 7, I'm encountering a problem with Reporting Services on a Sharepoint site. It is a Sharepoint 2010 site with SQL Server Reporting Services 2012 Sharepoint Integrated mode. I was previously on Firefox version 26 and didn't encounter this problem.
When a report is open and you use the Actions link on the Reporting Services toolbar, I receive the following error messages.
An error has occurred with the data fetch. Please refresh the page and retry.
I've tried updating to Firefox 28 beta but the same error occurs. I see another user is having the same problem here. http://sharepoint-community.net/forum/topics/reporting-service-and-firefox-27
Any help would be appreciated. Thanks!
Ryan

Rachel, I did perform the Sharepoint file alteration discussed in the other article and it did stop Firefox from producing the error. I've done some testing on some other browsers and have yet to encounter any problems with the fix however I'm hesitant to perform that workaround in a production environment.
Thanks for looking.
Ryan

Bdoc error "B partner with GUID B................ does not exist"

Hi Guru,
basically here I experienced this Bdoc error due to the fact that R/3 people took the decision to delete Master client data from R/3 tables, and afterward to reload Master clients data via legacy.
Some manual entries were already created in CRM, manually.
So during the performance of download from R/3 only the clients not already created were "re-created", sucessfully.
On the other hand for others already created in CRM with old Guids, the "re-download" with the new description, data, failed.
BDOCs produced this error:
"Business partner with GUID B............. does not exist" or "Business partner 1... already exists".
Basically I thought that partner Guid was not the same to R/3 so I deleted the entry from But000, and I tried to reprocessed the BDOc. It did not work.
I check the Guid entries in R/3 table CRMKUNNR and CRM table CRMM_BUT_CUSTNO. In these tables there the same entries.
Think that some inconsistencies are due to the deletion of master client in R/3, and next reloading via Legacy in R/3.
The question is: Which tables should I revise in order to add the right Bp GUID? How can I solve this unexpected issue? By launching a program?
I 'll reward with points if solution proposed can work.
Many thanks in advance.
Andrea

Hi,
basically this is another issue.
A list of Bdoc can be provided easily from administration control R3AS, where you use matchcode to find the bdoc list.
Regards,
Andrea

JDeveloper performance with XSL Mapper

Hi All,
Not sure if this is the right place to ask this question since it has to do JDeveloper performance with SOA and not ADF.
In the XSL Transformation mapper tool, whenever I do an auto-map between two large schemas, my JDeveloper memory usage hikes up to about 1.3 GB and then both the JRE and JDeveloper hangs although the transformation finishes. The problem is that sometimes it hangs before you can save it. It almost seems like a memory leak.
NOTE: I am not getting any out-of-memory error since I increased already increased the memory.
Any help to optimize and solve this problem will be very helpful.
Thanks!

chk this
http://docs.oracle.com/cd/E11036_01/doc.1013/e10295/xslt_mpr.htm
you should have SOA composite application extension for this..
if you dont want a visual transformation then you can use the jdeveloper project properties -> Run/Debug -> edit run configuration -> XSLT

ERROR = CONNECT failed with sql error '1017'

Hi,
we are getting the following error when we run r3trans -dx.It is an windows system.
Here i have attached the trans.log.
4 ETW000 r3trans version 6.14 (release 700 - 16.10.08 - 16:26:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.11.2010 - 08:58:12
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Nov 30 08:58:14 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 3857 0.003857
4 ETW000 [dev trc ,00000] using "E:\usr\sap\TQ1\DVEBMGS10\exe\dboraslib.dll"
4 ETW000 22 0.003879
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 9 0.003888
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 18 0.003906
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.167)
4 ETW000 143 0.004049
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 16 0.004065
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 25 0.004090
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.004108
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 29 0.004137
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 16 0.004153
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 15 0.004168
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 18 0.004186
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 223 0.004409
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 6714 0.011123
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 23 0.011146
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC 2397 0.013543
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPRP1's password 16 0.013559
4 ETW000 [dev trc ,00000] Connecting as /@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 22 0.013581
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 18 0.013599
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 109 0.013708
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 6894 0.020602
4 ETW000 [dev trc ,00000] Allocating server context handle 14 0.020616
4 ETW000 [dev trc ,00000] Attaching to DB Server TQ1 (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608)
4 ETW000 37 0.020653
4 ETW000 [dev trc ,00000] Assigning server context 0000000006E80608 to service context 0000000006E7E238
4 ETW000 21591 0.042244
4 ETW000 [dev trc ,00000] Allocating user session handle 32 0.042276
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 32 0.042308
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 34551 0.076859
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 23657 0.100516
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 13 0.100529
4 ETW000 [dev trc ,00000] Try to connect with default password 12 0.100541
4 ETW000 [dev trc ,00000] Connecting as SAPRP1/<pwd>@TQ1 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 17 0.100558
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.100574
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000006E6C090 000000000032AFF0 0000000006E7E378
4 ETW000 18 0.100592
4 ETW000 [dev trc ,00000] Assigning username to user session 000000000032B808
4 ETW000 15 0.100607
4 ETW000 [dev trc ,00000] Assigning password to user session 000000000032B808
4 ETW000 23 0.100630
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0000000006E7E238,srvhp=0000000006E80608,usrhp=000000000032B808)
4 ETW000 18 0.100648
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
4 ETW000 3281 0.103929
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 19 0.103948
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1017 10 0.103958
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1017 performing CON [dblink#5 @ 431]
4 ETW000 10634 0.114592
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#5 @ 431]
4 ETW000 17 0.114609
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'TQ1'"

Hi,
LOG BY0=>ORA-01017: invalid username/password; logon denied
You need to change your schema users password using "brconnect"
Try as follow:
1. Login as ora<sid>
2. Use below command to reset SAPRP1 users password
# brconnect -u system -f chpass -o SAPRP1 -p <new password>
If it still doesn't work... just set the password as "sap" (it is default password for schema user)
# brconnect -u system -f chpass -o SAPRP1 -p sap
Hope, it helps you...
Suggestions:
Above thing will help even if OPS$ mechanism is not set correctly...
But it is recommended to create and set permissions for OPS$ user. Else some BRTools function will produce errors...
Relevant notes are already suggested by others...
Please go through it word by word...
Regards.
Rajesh Narkhede

Error while communicating with the server

Hi Experts,
I'm having the following issue, when I try to send data using an input schedule the server says that there was an error while communicating with the server and don't send the data, I took a look at the log file and it says the following,
==============[BPC Logging]==============
[Message Type] : ERROR
[Job Name]     : OSoft.Services.Application.FileAccessService.FileAccessServiceProxy
[DateTime]     : 4/6/2011 8:42:44 AM
[UserId]       : CAMESAP\BPC_SYSADMIN
[Message]       : UJF_EXCEPTION E018     Cannot find document/directory 0
==============[BPC Logging End ]==============
Also i went to take a look at the default script logic, because i remember that this error happened to me when i wrongly program an script logic in the default.lgf but it shows me the following error when I open it,
System.InvalidCastExeption: Specified cast is not valid
at System.data.DataColumnCollection.get_Item(String name)
at System.data.DataRow.get_Item(String columnName)
at Osoft.Consumers.Admin.AdminLogicClient50.LogicMain.GetLogic()
If I compile the file, the error stop appearing, put with all new logic files it happens at first, I think that these two errors are very deep related, if anyone can help me will be very appreciated,
Thanks in advanced

Hi,
I have faced the similar kind of problem in BPC NW 7.5 SP5.
The main reason is when you are trying to send any data via input schedule, you will get this web server communication issue.
1) Check if any thing you are calling script logic under default.LGF. Exclude the logic out from default and test it.
2) Process all the dimensions in application
3) Perform Lite optimization and check are there any errors.
4) Finally check BPC COM+ services and check if any service stopped and also check osoft send governer service in microsoft services.
5) Diagnoise usign server manager.
6) Try input some thing in apshell and check if u face the same web server communication error?

Mac performance with Exchange Server 2010 SP1

Hi All,
I have some issue with Mac OS X 10.7.2 performance with when setting up new email connection Microsoft Exchange Server.
1) Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover. Note how long it takes. In my case, it takes almost two full minutes or more until it comes back and is fully set up (and starts synchronizing the server folders).
2) Now use Apple mail create a new EMAIL account MANUALLY -- just don't fill in the password... keep hitting Continue until it shows the POP setting. Select EXCHANGE and then fill in the appropriate details (mail.mydmain.com, check SSL enabled, etc.). Setting up an account this way takes only a few seconds.
3) Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover. it takes few second to completed.
I can summarize that:
- Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover: Slow
- Use Apple mail create a new EMAIL account MANUALLY: Normal
- Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover: Normal
In any case, do you have any solution to fix this issue.

Hi,
I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
Please try to use get-adpermission to verify if the user has "send as" right.
Manage Send As Permissions for a Mailbox
http://technet.microsoft.com/en-us/library/bb676368.aspx
Note: After you grant send as right, please try to restart Microsoft Information Store.
By the way, do you receive any NDR or error information when you send on behalf of others?
Xiu

Error in Perform with SmartForms

Similar Messages

Maybe you are looking for