Error in PL/SQL function

hi all,
i have return an pl/sql procedure and got this error.
Im not wrong at syntax .
the error is as follows.
CREATE OR REPLACE FUNCTION get_sal_details(e_emp_id NUMBER ,d_dept_id VARCHAR2)
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01400: cannot insert NULL into ("SYS"."OBJ$"."NAME")
Please help me to fix this error.
Thanks in advance,
Trinath Somanchi .
Hyderabad.

Im not wrong at syntax . Wanna bet?
It's a bit difficult to diagnose when you don't post the whole thing but here's a guess: somewhere in your code you are using double quote ( " ) instead of single quote ( ' ).
Cheers, APC

Similar Messages

Error calling pl/sql function in target column

Hi guys,
I get this error when calling my function in ODI:
Caused By: java.sql.SQLSyntaxErrorException: ORA-00904: "mySchema"."GET_ODI_DEFAULT_VALUE(1)": ongeldige ID --> 1 is an IN parameter
while in sql developer I get a good result with following query:
select mySchema.get_odi_default_value(1) from dual;
In my target table for the primary key I call a sequence from mySchema and this works fine.
I've tried the following synxtax in the mapping of my target column:
- <%=odiRef.getObjectName( "L","GET_ODI_DEFAULT_VALUE(1)", "D" )%>
- <%=odiRef.getObjectName( "L","GET_ODI_DEFAULT_VALUE", "D" )(1)%>
Thanks for you advice

iadgroe wrote:
how to bring oracle function into ODI
I thought for objects like sequences and functions you had to use 'odiRef.getObjectName' to get access to them.
Am I wrong because now I'm a little confused???Hi,
Best practices would be to use getobjectname method as this way your not hardcoding anything into the interface and you are referencing the logical object only, which means you can change the logical object later and not have to worry about changing the interfaces.

Error Using LISTAGG SQL Function

Hello,
I'm trying to use the new LISTAGG SQL function with the following expression in a report:
select listagg(email, ';') within group (order by email) as email_list from sba_registration_entries where team=241
and I get the following SQL error in Apex SQL Workshop:
ORA-00923: FROM keyword not found where expected
Is this function enabled on the apex.oracle.com site? Am I using the correct syntax?

Hi,
The current database on apex.oracle.com is "Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production"
The LISTAGG function seems to be from version 11.2: [http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/functions087.htm] ?
Andy

Error while creating sql function

I am getting the following error when i execute the below query for creatin sql function. Please let me know waht is the problem
Major Error 0x80040E14, Minor Error 25501
> create FUNCTION fantastic ( @deal_id , @as_of_date)
returns @funtab table
(issue_id int not null,
par_amount money not null)
as
begin
insert @funtab
select a.issue_id,a.par_amount
from asserts as a, issue as i, issuer_rating_history h, deal d
where h.as_of_date = @as_of_date and
d.deal_id = @deal_id and
d.deal_id = a.deal_id
a.issue_id=i.issue_id
return
end
There was an error parsing the query. [ Token line number = 1,Token line offset = 8,Token in error = FUNCTION ]
create FUNCTION fantastic ( @deal_id , @as_of_date)
returns @funtab table
(issue_id int not null,
par_amount money not null)
as
begin
insert @funtab
select a.issue_id,a.par_amount
from asserts as a, issue as i, issuer_rating_history h, deal d
where h.as_of_date = @as_of_date and
d.deal_id = @deal_id and
d.deal_id = a.deal_id
a.issue_id=i.issue_id
return
end

Hello,
See MSDN
Differences Between SQL Server Compact and SQL Server => "User-defined functions and full text:
Not supported" in SQL CE, so you can not create a function as in SQL Server.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error using Extended SQL Function substr

I want to be able to look for the first three letters of a month in the XML and if found replace the 3 letter month (for example SEP-05 to September 05). I have tried the following which throw a namespace exception. Please let me know what I may be doing wrong?
1. <?if:(xdofx:substr(../fsg:ColContext[2]/fsg:ColHeadLine2,1,3)='SEP'?>September<?end if?> should give me September.
The above fails with: Font Dir: E:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: E:\Work\Bacardi\Reports\XML\US GAAP BALSHEET\XML BL Dir Rpt BS YTD_0126.xml
FOProcessor setLocale: en-us
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:514)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:192)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:156)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:916)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:869)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:204)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1535)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:925)
     at RTF2PDF.runRTFto(RTF2PDF.java:590)
     at RTF2PDF.runXDO(RTF2PDF.java:443)
     at RTF2PDF.main(RTF2PDF.java:237)
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'xdofx' used but not declared.
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
     ... 15 more
2. For the year, I would use another form field and do something like this next to the month above: <?xdofx:substr(../fsg:ColContext[2]/fsg:ColHeadLine2,5,2)?> for a result of '05'

Hasan
XSL has many native string manipulation functions so you do not need to use our SQL functions when a native XSL one will do:
<?if:substring(normalize-space(../fsg:ColContext[2]/fsg:ColHeadLine2),1,3)='SEP'?>September<?end if?>
See that dang normalize space function again ... had to use it on my FSG sample.
Would it not be easier to either:
1. Have the FSG generate the September YYYY format or
2. Have FSG generate XSD date formats, 'YYYY-MM-DD', then you can just specify the date format in the form fields
Regards, Tim

PL/SQL function body returning SQL - report error:ORA-01403: no data found

Hi,
I am working on Application Express 4.0.2.00.06, and 11G database.
I have a problem with classic report area of type - PL/SQL function body returning SQL query. Query works if I define region area as - Use Generic Column Names (parse query at runtime only), and does not when I define it - Use Query-Specific Column Names and Validate Query.
I am getting error:
report error:ORA-01403: no data found
This is my query that is returned from function, and displayed with htp.p, and it works ok and returns data in SQL Developer and SQL Workshop (in Apex).
<code>
/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA
</code>
As you can see, I even tried with workaround that I found on the previous post on the forum, and that is to put /* select 1 from dual */ to start query.
Any help would be appriciated.

/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA

PL/SQL function body returning SQL query - ORA-06502: PL/SQL: numeric or value error

I'm attempting to dynamically generate a rather large SQL query via the "PL/SQL function body returning SQL query" report region option. The SQL query generated will possibly be over 32K. When I execute my page, I sometimes receive the "ORA-06502: PL/SQL: numeric or value error" which points to a larger than 32K query that was generated. I've seen other posts in the forum related to this dynamic SQL size limitation issue, but they are older (pre-2010) and point to the 32K limit of the DNS (EXECUTE IMMEDIATE) and DBMS_SQL. I found this post (dynamic sql enhancements in 11g) which discusses 11g no longer having the 32K size limitation for generating dynamic SQL. Our environment is on 11gR2 and using ApEx 4.2.1. I do not know which dynamic SQL method -- DNS or DBMS_SQL -- ApEx 4.2.1 is using. Can someone clarify for me which dynamic SQL method ApEx uses to implement the "PL/SQL function body returning SQL query" option?
As a test, I created a page on apex.oracle.com with a report region with the following source:
declare
l_stub varchar2(25) := 'select * from sys.dual ';
l_sql clob := l_stub || 'union all ';
br     number(3) := 33;
begin
while length ( l_sql ) < 34000 loop
    l_sql := l_sql || l_stub || 'union all ';
end loop;
l_sql := l_sql || l_stub;
for i in 1 .. ceil ( length ( l_sql ) / br ) loop
    dbms_output.put_line ( dbms_lob.substr ( l_sql, br, ( ( i - 1 ) * br ) + 1 ) );
end loop;
return l_sql;
end;
The dbms_output section is there to be able to run this code in SQL*Plus and confirm the size of the SQL is indeed larger than 32K. When running this in SQL*Plus, the procedure is successful and produces a proper SQL statement which can be executed. When I put this into the report region on apex.oracle.com, I get the ORA-06502 error.
I can certainly implement a work-around for my issue by creating a 'Before Header' process on the page which populates an ApEx collection with the data I am returning and then the report can simply select from the collection, but according to documentation, the above 32K limitation should be resolved in 11g. Thoughts?
Shane.

What setting do you use in your report properties - especially in Type and in Region Source?
If you have Type="SQL Query", then you should have a SELECT statement in the Region Source. Something like: SELECT .... FROM ... WHERE
According to the ERR-1101 error message, you have probably set Type to "SQL Query (PL/SQL function body returning SQL query)". In this situation APEX expects you to write a body of a PL/SQL function, that will generate the text of a SQL query that APEX should run. So it can be something like:
declare
mycond varchar2(4000);
begin
if :P1_REPORT_SEARCH is not null THEN
mycond:='WHERE LAST_NAME like :P1_REPORT_SEARCH ||''%''';
end if;
return 'select EMPLOYEE_ID, FIRST_NAME, LAST_NAME from EMPLOYEES ' ||mycond;
end;
And for escaping - are you interested in escaping the LIKE wildcards, or the quotes?
For escaping the wildcards in LIKE function so that when the user enters % you will find a record with % and not all functions, look into the SQL Reference:
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/conditions007.htm
(You would than need to change the code of your function accordingly).
If you are interested in escaping the quotes, try to avoid concatenating the values entered by the user into the SQL. If you can, use bind variables instead - as I have in my example above. If you start concatenating the values into the text of SQL, you are open to SQLInjection - user can enter anything, even things that will break your SQL. If you really need to allow users to choose the operator, I would probably give them a separate combo for operators and a textfield for values, than you could check if the operator is one of the allowed ones and create the condition accordingly - and than still use bind variable for inserting the filtering value into the query.

Error in report when executing pl/sql function body returning sql query.

Hi,
I have used the pl/sql function body returning sql query for creating a report. I have created a datepicker(
P10_TASK_DATE) which can be submitted.The code is as below
DECLARE
v_sql varchar2(3000);
BEGIN
if :P10_TASK_DATE is not null THEN
v_sql:='select
* from tasks';
return v_sql;
else
v_sql:='select * from discovery';
return v_sql;
END IF;
END;if the date field is empty "select * from discovery" is executed and report is getting generated. But when we give a
date using date picker the page is submitted and i get "report error: ORA-01403: no data found" even
though the "tasks" table has data in it. Plz help
Thanks,
TJ

hi
Please try this
1. Create 2 region
1st region source=
select * from tasks'
go to the tab -> condition =
item NOT NULL
EXpression1 =:P10_TASK_DATE
this will run whenever the item have any date
2. open your 2 nd region source code= select * from discovery
put the condition
item is NULL
EXpression1 =:P10_TASK_DATE
thanks
Mark Wyatt

To_numer function return error in pl/sql

Hello,
I don't have a prob when running select to_number('1234.56') from dual, the numer contains digit decimal
But this stm return error Invalid number in procedure unless I use to_number('1234.56','9999999.99')
Please help me out.
Do I have to set parameter in DB ?
BTW: my NLS_NUMERIC_CHARACTER is set to '.,'
Thanks.

to_numer function return error in pl/sql
hlthanh wrote:
Hello,
I don't have a prob when running select to_number('1234.56') from dual, the numer contains digit decimal
But this stm return error Invalid number in procedure unless I use to_number('1234.56','9999999.99')
Please help me out.
Do I have to set parameter in DB ?
BTW: my NLS_NUMERIC_CHARACTER is set to '.,'
Thanks.Handle:      hlthanh
Status Level:      Newbie
Registered:      Mar 7, 1999
Total Posts:      94
Total Questions:      60 (38 unresolved)
so many questions & so few answers.
How SAD!

SQL Query (PL/SQL function body returning SQL query) Error

I'm an ApEx newbie, not a PL/SQL developer (more of a Web application developer) and I'm getting an error that prevents me from saving some PL/SQL code. I've looked over it all afternoon, but can't tell what's wrong. I may even be trying to do something inappropriately, or really stupid.
The code is below. The error I get is - "Function returning SQL query: Query cannot be parsed within the Builder". Any help is appreciated, and thanks in advance. If you need more details of what I'm trying to do let me know.
= = = = = = =
DECLARE
v_ID NUMBER;
v_SITE_ID NUMBER;
v_SITE_CODE VARCHAR2(15);
v_ADDR1 VARCHAR2(240);
v_CITY VARCHAR2(25);
v_STATE VARCHAR2(150);
v_ZIP VARCHAR2(20);
v_ORG_ID VARCHAR2(10);
BEGIN
IF :G_ORG_ID = '' THEN
SELECT "VENDOR_ID", "VENDOR_SITE_ID", "VENDOR_SITE_CODE", "ADDRESS_LINE1", "CITY", "STATE", "ZIP", "ORG_ID"
INTO v_ID, v_SITE_ID, v_SITE_CODE, v_ADDR1, v_CITY, v_STATE, v_ZIP, v_ORG_ID
FROM "PO_VENDOR_SITES_ALL_V"
WHERE ("VENDOR_ID" = :P4_VENDOR_ID);
ELSE
SELECT "VENDOR_ID", "VENDOR_SITE_ID", "VENDOR_SITE_CODE", "ADDRESS_LINE1", "CITY", "STATE", "ZIP", "ORG_ID"
INTO v_ID, v_SITE_ID, v_SITE_CODE, v_ADDR1, v_CITY, v_STATE, v_ZIP, v_ORG_ID
FROM "PO_VENDOR_SITES_ALL_V"
WHERE (("VENDOR_ID" = :P4_VENDOR_ID) AND ("ORG_ID" = :G_ORG_ID));
END IF;
END;

Denes,
Good question.
Before I answer that question I'll give some detail on the application. That may help too. The application is a supplier search which searches the Oracle vendor tables (po.vendors, po_vendor_sites_all, po_vendor_contacts). The vendor/vendor site relationship is one to many. The site is based on the Org_ID. The supplier search is built to work solo, or to be called by another application. If it is called by another application one of the values passed is the Org_ID, so that only the sites that pertain to the user's org_id are shown. If the appl is called solo the Org_ID is not known, so the SQL should return all sites.
I figured the easiest way to check if the program was running solo or was called was to check the G_ORG_ID value in my PL/SQL that builds the site report. You helped me with that code. (I am hiding buttons by checking if the G_ORG_ID field is null and they display/hide properly.)
So, how is G_ORG_ID populated? It is on Page Zero, and is populated via the URL when the appl is called. (That aspect works great.) If it is called by another application G_ORG_ID is populated and my PL/SQL works. But, if the appl is called solo the field is not populated. When the PL/SQL runs I cannot get it to run the code for when G_ORG_ID is not populated.
I am at the point that I don't know if I need to populate G_ORG_ID in some way when the appl is running solo (kinda tricky, because I need to use that field to determine if it is running solo), or if I need to check it differently in the PL/SQL IF.
I have experimented with both the default value, and have checked for different values in the PL/SQL IF, but nothing works.
Thanks for your help, and let me know if you have any other questions on this matter.
Thanks, Tony

PL/SQL Function Returning Query Error / ORA-01858: a non-numeric char.....

I'm trying to write a PL/SQL function to dynamically return a query with varying # of columns. I've done this type of thing before wiith much success, however this is the first time I'm using a cursor for loop within a function to accomplish my task.
here is the error I get:
ORA-01858: a non-numeric character was found where a numeric was expected
Error ERR-1101 Unable to process function body returning query.
Mind you I have tested the PL/SQL from a SQL editor and it works fine. I'm confused.
Code is below.
Thanks in advance!
DECLARE
my_query varchar2(4000);
string1 varchar2(50) := 'select city, ';
string2 varchar2(4000) := '' ;
string3 varchar2(4000):= 'from
( select a.title, a.city, a.start_date, sum(a.total_stu) cnt
from sj_class_summary3 a
group by a.title, a.city, a.start_date
having a.title = :P4_COURSE )
group by title, city';
TYPE date_tab_type IS TABLE OF date INDEX BY PLS_INTEGER;
date_tbl date_tab_type;
i number;
BEGIN
i:=1;
for myrec in (select distinct start_date from sj_class_summary3
where start_date between :P4_START_DATE and :P4_END_DATE order by 1) loop
date_tbl(i) := myrec.start_date;
string2 := string2 || ' max( decode( start_date, ''' || date_tbl(i) || ''', cnt,0) ) "' || date_tbl(i) || '", ';
i := i+ 1;
end loop;
string2 := SUBSTR(string2,1,LENGTH(string2)-2);
string2 := string2 || ' ';
my_query := string1 || string2 || string3;
return my_query;
END;

Hi Bob,
you also have another date to character to date conversion in:
decode( start_date, ''' || date_tbl(i) || ''', cnt,0)
does this need to be:
decode( start_date, to_date(''' || to_char(date_tbl(i), 'dd/mm/yyyy') || ''', ''dd/mm/yyyy''), cnt,0)
Regards
Michael

PL/SQL Function call error while reading or assigning returned value

Hi,
I am getting the following error while tryih to read the value of the PL/SQL Function. I am calling a function in one of my PL/SQL Packages passing mutliple IN parametes and the function returns some value back. Now on BPEL side when I try to read the return value I am getting an error:
*<summary>*
empty variable/expression result.
xpath variable/expression expression "/ns3:OutputParameters/ns3:TEST_FUNCTION" is empty at line 124, when attempting reading/copying it.
Please make sure the variable/expression result "/ns3:OutputParameters/ns3:TEST_FUNCTION" is not empty.
*</summary>*
Even though in the console when I check the Invoke Output Parameter it does shows me a valid value being retuned by a Function but when I am trying to Assgn this value to some variable using Assign Activity I get the above error.
Even though all goes fine but looks like I am not able to read or assign the value returned from the Function.
So just wondering if this even works as to me I have a very simple example and that seems not to work. Function is called successfully and is returning the value as I can see it in the BPEL console but when tryin to read or assign that value to some other variable I get the above error.
Any ideas?
Thanks

This issue has come up a lot. The problem is with a mismatch between the version of JDeveloper and SOA. You'll encounter namespace issues if you use 10.1.3.1 in combination with 10.1.3.3 (or 10.1.3.4). You MUST synchronize both JDev and SOA to 10.1.3.3 or 10.1.3.4 (mixing 10.1.3.3 and 10.1.3.4 is OK). We changed when going to 10.1.3.3 by adding elementFormDefault="qualified" to the generated XSD. We used the default "unqualified" in 10.1.3.1. So you'll encounter namespace issues unless you're using 10.1.3.3 or higher JDev AND SOA. The fact that I see <*db:*...> tells me that you're using 10.1.3.1 JDeveloper. The correct solution is to upgrade your components.

Error PLS-00306 during calling PL/SQL function from Java

Hi all,
I am facing a problem during call of oracle PL/SQL function from java using CallableStatement.
I receive following error message.
java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'EXPORT_HIST_ALARMS_FUNC'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
As per above error EXPORT_HIST_ALARMS_FUNC in oracle has this signature.
CREATE OR REPLACE FUNCTION EXPORT_HIST_ALARMS_FUNC(startDateTime VARCHAR2, endDateTime VARCHAR2, meType VARCHAR2) RETURN VARCHAR2 IS
END EXPORT_HIST_ALARMS_FUNC;
Above function I have called following way in java.
String sql = "begin ?:= EXPORT_HIST_ALARMS_FUNC(?, ?, ?); end;" ;
CallableStatement cStatement = null;
cStatement = connection.prepareCall(sql);
cStatement.registerOutParameter(1,Types.VARCHAR);
cStatement.setString(2,startDateTime);
cStatement.setString(3,endDateTime);
cStatement.setString(4,meType);
cStatement.execute();
msg = cStatement.getString(1);
Actually above function requires three input parameters and one return parameter.
During execution of above java code it throws SQLException and shows PLS-00306: wrong number or types of arguments in call to 'EXPORT_HIST_ALARMS_FUNC' error.
I have run this function directly from oracle with three parameters and run successfully and finally it returns string.
But I am unable to figure out why it doesn't run from above java code.
Please help regarding this.
Thanks.
Regards,
Shardul Banker

Try this:
String sql = "begin ?:= EXPORT_HIST_ALARMS_FUNC(?, ?, ?); end;" ;
CallableStatement cStatement = null;
cStatement = connection.prepareCall(sql);
cStatement.registerOutParameter(1,Types.VARCHAR);
cStatement.setString(1,startDateTime);
cStatement.setString(2,endDateTime);
cStatement.setString(3,meType);
cStatement.execute();
msg = cStatement.getString(1);Regards,
Martijn Teigeler
Edited by: mTeigeler on Oct 13, 2007 10:22 AM

Error on calling PL/SQL function

Hi All,
I have a code to call an existing PL/SQL function as following:
PL/SQL function:
FUNCTION pub_pkg.get_acc_rule_id (
i_pub_id IN NUMBER,
i_issue_id IN NUMBER,
i_item_type IN VARCHAR,
i_start_date IN DATE,
i_end_date IN DATE
RETURN NUMBER;
Java Code:
public Number getAccountingRuleId(Number pubId, Number issueId, String itemType,
Date startDate, Date endDate)
Number ruleId = new Number(-1);
String sqlstatement =
"BEGIN " + "\n"
+" :1 := pub_pkg.get_acc_rule_id " + "\n"
+" (p_param1 => :2" + "\n"
+" ,p_param2 => :3" + "\n"
+" ,p_param3 => :4" + "\n"
+" ,p_param4 => :5" + "\n"
+" ,p_param5 => :6" + "\n"
+" );" + "\n"
+"END; " + "\n";
OADBTransaction trans = this.getOADBTransaction();
OracleCallableStatement cStmt =
(OracleCallableStatement) trans.createCallableStatement(sqlstatement,1);
try
cStmt.setNUMBER(2,pubId);
cStmt.setNUMBER(3,issueId);
cStmt.setString(4,itemType);
cStmt.setDATE(5,startDate);
cStmt.setDATE(6,endDate);
cStmt.registerOutParameter(1, Types.INTEGER, 0, 10);
cStmt.execute();
ruleId = new Number(cStmt.getNUMBER(1));
cStmt.close();
catch (Exception ex)
throw OAException.wrapperException(ex);
finally
try
cStmt.close();;
catch(Exception e)
throw OAException.wrapperException(e);
return ruleId;
But I got error as following:
java.sql.SQLException: ORA-06550: line 2, column 8:
PLS-00306: wrong number or types of arguments in call to 'GET_ACC_RULE_ID'
ORA-06550: line 2, column 2:
PL/SQL: Statement ignored
Can anyone help me to point out where is wrong with my code?
Thanks & Regards,
KJ

That's a nice summary of this thread discussion, KJ. I hope other guys also start doing the same when their issue gets fixed.
To add to above summary, if you want to call a procedure instead of a function, then you need to modify the line
String sql = "begin :1 := package.function(:2,:3,:4); end;";
to
String sql = "begin package.procedure(:1,:2,:3); end;";
In and out parameters can be as per the actual procedure.
--Shiv

How to debug PL/SQL functions? Passing parameter and debugger error

Hi,
How to debug a PL/SQL function in JDeveloper? There are two problems with it:
1) Don't see how it's possible to pass parameters required by function call (in the dialog opening after Debug -> Debug FUNCTION_NAME)
2) In a function returning table_name%ROWTYPE (and having a record declaration for table_name%ROWTYPE), debug gives error:
PLS-00103: Encountered symbol "/" when expecting one of ... in line
v_Return PL/SQL RECORD;
Debugging procedures works as expected.
Found a similar question without answer here:
Debugging PL/SQL with parameters

Check
http://www.oracle.com/technology/obe/obe9051jdev/plsqlobe/obeplsql.htm#t2
Frank

Error in PL/SQL function

Similar Messages

Maybe you are looking for