Error in portlets while using Basic Authentication

We have the Portal on the web.Whenever anyone types the URL for the Portal welcome page he is prompted for a
username and a password(facilitated by the Apache Server security by adding the relevant tag in the httpd.conf file).The following is the tag added in the httpd.conf file:-
<Location /servlet>
AuthName "XXX"
AuthType Basic
AuthUserFile "F:/Oracle9iAS/Apache/Apache/bin/users"
require user kiran
</Location>
For a particular user we have added the Exchange portlet on his home page under a tab.Clicking on this particular tab gives the following error when the security is present.
The following error occurred when attempting to call the
initSession of the Web Provider: exchangeprovider_XXX
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.UnsatisfiedLinkError: no oraawt in
java.library.path
However on removal of the security the same Exchange portlets is displayed without any errors.
Any help on the above would be welcome.
Thanks in advance.
Regds.
Kiran.

Please check the OSS note below and install the mentioned patch accordingly:
[Note 1278687 - Exception in the IDocXMLProcessor (IDOC_ERROR_PARSE_FAILURE)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1278687]
If it persists, check if are there any mapping errors on the Audit Logs for the failed message.

Similar Messages

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

Interactive form using Basic Authentication

Hi,
I am getting the following problem when deploying the Adobe Interactive Form application developed using Basic Authentication onto the server.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Processing exception during a "Render" operation.
Request start time: Tue Jul 04 12:04:51 GMT+05:30 2006
     at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:486)
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:185)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1154)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:402)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please suggest me, how I can solve it.
Also I have done only the Basic Authentication, so is there any need for SSL Configuration.
Regards
Tiffny

Hi Krishanu,
   Thanks for your responseI have checked the url that I had put in Web Service as http://versa:80/AdobeDocumentServices/Config?style=document
and when I run this url which seems to be working fine and on run it I test it, also it gives wsdl url which is
http://versa:80/AdobeDocumentServices/Config?wsdl&style=document
and on clicking this url it opens the xml document.
I have also checked the Log, where I find that
#1.5#00132120E8600063000000440000106C000417BF56A46124#1152010466682#com.adobe.AdobeDocumentServices#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServices#ADSUSER#8739#SAP J2EE Engine JTA Transaction : [038153a00111]###744037e00b4b11dbbc1700132120e860#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/Server#Plain###Processing exception during a "Render" operation.
Request start time: Tue Jul 04 16:24:23 GMT+05:30 2006
<b>com.adobe.ProcessingError: File not found error writing stream:</b> <Render><Template><Name> "http://versa:80/webdynpro/dispatcher/local/TravelRequest/TravelRequestApp/wd_keyHC0DDbOBtzpF0n9-a_pEPA==/sapwebdynpro.xft;jsessionid=(J2EE3675400)ID2045061650DB01945523008391574204End;saplb_*=(J2EE3675400)3675450?sap.session.download=4&sap-wd-cltwndid=7425f9200b4b11dbc43100132120e860&sap-wd-appwndid=Id7425f9200b4b11dbc43100132120e86011&sap-wd-norefresh=true :
java.io.FileNotFoundException: IO error detected while retrieving input stream for: http://versa:80/webdynpro/dispatcher/local/TravelRequest/TravelRequestApp/wd_keyHC0DDbOBtzpF0n9-a_pEPA==/sapwebdynpro.xft;jsessionid=(J2EE3675400)ID2045061650DB01945523008391574204End;saplb_*=(J2EE3675400)3675450?sap.session.download=4&sap-wd-cltwndid=7425f9200b4b11dbc43100132120e860&sap-wd-appwndid=Id7425f9200b4b11dbc43100132120e86011&sap-wd-norefresh=true :
java.io.IOException: Server returned HTTP response code: 503 for URL: http://versa:80/webdynpro/dispatcher/local/TravelRequest/TravelRequestApp/wd_keyHC0DDbOBtzpF0n9-a_pEPA==/sapwebdynpro.xft;jsessionid=(J2EE3675400)ID2045061650DB01945523008391574204End;saplb_*=(J2EE3675400)3675450?sap.session.download=4&sap-wd-cltwndid=7425f9200b4b11dbc43100132120e860&sap-wd-appwndid=Id7425f9200b4b11dbc43100132120e86011&sap-wd-norefresh=true
Can you tell me which file it is looking for.
Regards
Tiffny

(JAAS) Getting LoginContext when using BASIC authentication

I am using basic authentication in JAAS to authenticate users for JSF web resources. My web.xml is configured as follows:
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>eccgroup</realm-name>
</login-config>
How can I get hold of the LoginContext that (I assume) was created in order to logout?
The Principal is available on the HTTPRequest but I cannot find where the LoginContext is stored?

As far as I know, vendors are not required to rely on a JAAS LoginContext to perform BASIC auth. Different vendor implementations may do different things. So you may have to rely on a programmatic logout API, but I'm not personally aware of any standard API for this.

How to log out using BASIC authentication

Hi,
we are using JSC and Sun Appserver8.
To authenticate we are using BASIC authentication and it works well.
Now we need to do a log out function because of new demands.
Is it possible to log out when using BASIC authentication ?
If so, how?
/Regards Krister

If you are using Basic Authentication, you may not be able to force log out. In that case you may have to use form based authentication.
Please read more details here
http://httpd.apache.org/docs/1.3/howto/auth.html
(Look at the topic How do I log out?)
- Winston
http://blogs.sun.com/winston

11i Login Page is showing 'Error on Page' while using IE 7

Hi DBAs,
I am using Oracle 11.5.10.2 with DB 10.2.0.4 (Single Instance). The EBS is on RUP6 and using JDK 1.6.0_12.
I was using Firefox and not getting any issue. I used first time IE-7 (7.0.5x) to access the application. I noticed that Pressing the 'Login' button on Login Page , it was saying in the left bottom of the IE says 'Error on page' and was not navigate to any page or did not perform any action.
I verified all the services and everything was OK. While using Firefox , I was able to navigate the application w/o any issue.
Using IE 7 , I am able to access
http://host.domain:8000/OA_HTML/fndvald.jsp?username=sysadmin&;password=sysadmin
Most of the stuff seems to be working fine while logging in using above URL but the 'GO' buttons are throwing same error in IE 'Error on page'. Rest of the Bottons like 'Edit Navigator' , 'Edit Favorites' are working fine but when on any Page I press the 'Go' button then IE showing Error. It seems to me that when a button need to navigate to next page then IE saying 'Error on page' but when a button have to lunch a new page it is working fine.
All the responsibilities and links are working fine. Application Navigation using Firefox is working absolutely fine.
Seeking your advise and suggestions to resolve the issue.
Thanks
-Samar-

Hi Samar,
You can clear the cache as follows (login as applmgr user, and source the application env file):
$ cd $COMMON_TOP/_pages
$ rm -R *
ML Note: 285218.1 is not helpful as I am on later version of EBS (11.5.10.2 with RUP6 and Developer6i Patchset 19). At Client side I am using Windows XP SP3 with IE 7.0.5.x with JInit 1.3.21 and JRE 1.6.0.12.Did you review the steps under "Recommended MSIE Browser Settings" section?
Can you reproduce the issue with JInitiator? If yes, any errors in the JInitiator console window? Enable debug (you may also enable trace for Sun JRE) and see if any errors are reported there.
Note: 549423.1 - How to enable tracing and logging for Sun JRE (Native Plug-in)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=549423.1
Regards,
Hussein

Help needed for using BASIC authentication through JDBCRealm

Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.

You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
    <Realm
        className="org.apache.catalina.realm.JDBCRealm"
        driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
        connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
        connectionName="username" connectionPassword="password"
        digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
        userRoleTable="user_roles" roleNameCol="rolename"
    />
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

Error in CC while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module

Hi,
We are getting an error in CC monitoring while using SAP_XI_IDOC/IDOCXmlToFlatConvertor module for converting IDoc XML to flat file. Below is the error text:
"Message processing failed. Cause: com.sap.conn.idoc.IDocParseException: (7) IDOC_ERROR_PARSE_FAILURE: An IDocConversionException occurred while parsing IDocXML for type <ZDELVRY3>: state=READING_FIELD_VALUE_TAG, charPosition=7404, lineNumber=2, columnNumber=7366"
Any suggestion how to resolve it.
Regards
Pravesh

Please check the OSS note below and install the mentioned patch accordingly:
[Note 1278687 - Exception in the IDocXMLProcessor (IDOC_ERROR_PARSE_FAILURE)|https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1278687]
If it persists, check if are there any mapping errors on the Audit Logs for the failed message.

Getting Error in Infoview while using Date Range Filter in SAP BW Universe

Hi,
I have created a date range Filter in My Universe
<FILTER KEY= "@Select(Debit Memo Date\L01 Debit Memo Date)">
<CONDITION OPERATORCONDITION= "Between">
<CONSTANT CAPTION= "[ZFDAY_MTH].[LEVEL01]"/>
<CONSTANT CAPTION= "[ZCBDATE].[LEVEL01]"/> </CONDITION></FILTER>
It was Parsed "OK" without any errors.
When I used this filter in my report it does not return any records, while there are some records which I had verified earlier. When I include the two fields "[ZFDAY_MTH].[LEVEL01] and "[ZCBDATE].[LEVEL01] in My Report with the filter I am getting the following error -
A database error occured. The database error text is: A pointer intended for use is NULL. pConstantOperand is NULL in SAPSQLExpressionEvaluator::getOperandsFromCondition, exception raised at line 125 of file source/sofasqlexpressionevaluatorbase.cpp. (WIS 10901)
If I remove the filter and run the report , it gives me the expected results.
Please help me if anyone has faced this issue earlier.
Thanks ,
Pankaj Goswami

Hi,
How about using this code.
I have not tested but I think if we follow this syntax pattern, it might work
<FILTER KEY="[Debit Memo Date\L01 Debit Memo Date].[LEVEL01].[TECH_NAME]"><CONDITION OPERATORCONDITION="Between"><CONSTANT TECH_NAME="@select(ZFDAY_MTH.LEVEL01','D',,mono,free)"/><CONSTANT TECH_NAME="@select(ZCBDATE.LEVEL01','D',,mono,free)"/></CONDITION></FILTER>
Regards,

Runtime error in MIRO while using User/Screen exit

Hello,
I have implemented an exit in ABAP for MIRO which when transported to Quality server through runtime error.
I have used EXIT (SMOD) : LFDCB001 which contains FM -> EXIT_SAPLFDCB_001 and include -> ZXM08U31. In this exit I have written my code to disable Inv. Party field. This field exist in Details Tab in Miro Transaction.
Location of the field: MIRO -> Details (tab) -> Inv. Party (Field)
Code written in include ZXM08U31 is:
LOOP AT SCREEN.
IF screen-name = 'INVFO-LIFRE'.
    screen-input = 0.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
This exit is assigned to a project in CMOD and I tested the same in Development system. It is working perfectly.
Now I transported the TR (Includes program ZXM08U31 and Customer enhancement projects ZMIRO). Now when I run MIRO in quality server it triggers the my logic and then through runtime error.
Runtime error says:
Short text
    Dynpro does not exist
Error analysis
    The system attempted to use dynpro 0400 in program "SAPLXM08".
    This dynpro does not exist.
I agree that screen 400 does not exists in program for MIRO but it does not exists in development system as well. So if the runtime error is valid in QEC server then why not in DEV server. And when it can run successfully in DEV server why cant it run in QEC server.
Hope I have explained all the things in detail.
Please provide me the solution since user can bombard anytime for the MIRO dump everytime in QEC.
Regards,
Harjeet Grover

Hi Harjeet,
Reason of your Dump is that the enhancement "LFDCB001" which you used contains one Function module exit "EXIT_SAPLFDCB_001" and another one screen exit in calling screen "SAPLFDCB" number 0150.
So when you activate your project these above mentioned both components were activated.
So when you execute transaction SAP looks for called screen "SAPLXM08" No-0400 but as you havn't created and program go for DUMP.
Solution - Just Create called screen "SAPLXM08" No-0400 and activate.
Thanks,
Vijay

Problem accessing servlet from java class which uses Basic Authentication

"Hi,
I am using weblogic 6.1 server. I am calling a servlet file from a class file using HttpURLConnection. This is the code below.
          String theUsername="B1A1Z1T2";
          String thePassword="hlladmin";
          String urlString="http://rsnetserver:113/hll/servlet/CallSSRUpload";
          String userPassword = theUsername ":" thePassword;
          String encoding = new sun.misc.BASE64Encoder().encode (userPassword.getBytes());
          try
               URL url = new URL (urlString);
               HttpURLConnection uc=(HttpURLConnection)url.openConnection();
               int it = 0;
               while ((it = encoding.indexOf('\n')) != -1
                    || (it = encoding.indexOf('\r')) != -1) {
                         encoding = encoding.substring(0, it)
                         encoding.substring(it 1);
               uc.setRequestProperty("Authorization","BASIC " encoding);
               uc.setRequestProperty("SOAPAction", url.toString());
               System.out.println(uc.getResponseCode());
               System.out.println(uc.getResponseMessage());
          catch(Exception io)
               io.printStackTrace();
               System.out.println("error message........" io.getMessage());
In web.xml I have d

Hello,
Could you post the stack trace?
Thanks,
Bruce
Vijay Babu wrote:
>
"Hi,
I am using weblogic 6.1 server. I am calling a servlet file from a class file using HttpURLConnection. This is the code below.
String theUsername="B1A1Z1T2";
String thePassword="hlladmin";
String urlString="http://rsnetserver:113/hll/servlet/CallSSRUpload";
String userPassword = theUsername ":" thePassword;
String encoding = new sun.misc.BASE64Encoder().encode (userPassword.getBytes());
try
URL url = new URL (urlString);
HttpURLConnection uc=(HttpURLConnection)url.openConnection();
int it = 0;
while ((it = encoding.indexOf('\n')) != -1
|| (it = encoding.indexOf('\r')) != -1) {
encoding = encoding.substring(0, it)
encoding.substring(it 1);
uc.setRequestProperty("Authorization","BASIC " encoding);
uc.setRequestProperty("SOAPAction", url.toString());
System.out.println(uc.getResponseCode());
System.out.println(uc.getResponseMessage());
catch(Exception io)
io.printStackTrace();
System.out.println("error message........" io.getMessage());
In web.xml I have d

Dbhelp error in win98 while using java

Hi everyone,
i am trying to write a screen capture program using Robot class and i have an error while not only woking with my project but also working with any other Applet or application.
The error is as followed :
An error occured.Dbhelp error!
it writes only this and neither javac nor jvm works!!!
I dont know what to do , i formatted my pc 3 times and dealed with some setings in Java console of Java plug in but it didnt work!

I been having a similar problem with Java JRE.
At the end of installing or when the browser plugin exits with the browser, Dbhelp causes a illegal operation in windows. Everything seems to work but illegal operations in Dbhelp is annoying. The problem on certain PC's running Windows 98 SE and with JRE version 1.4.2_01 to 1.4.2_05 and 1.5.0Beta2. The problem does not affect JRE version 1.4.1_07 and earlier.

Error in dashboard while using Add Query

Hi All,
I got an error while connecting to Bex Query in Dashboard.
Created olap connection in IDT
Iam Using Dashboard 4.1 sp2 .Dashboard Server has been restarted.
Error screenshot has been attached
Need Help.....
Regards
Sushma.

Hi,
Try to execute the BEx query in webi and check whether its running fine.
1974638 - Request Processing Failed. (XLS 000009) Query script generation failed. See your administrator. The result object 'xxxxx' is missing from result objects. (IES 00013)
Try to remove the prompt from the BEx query and create it in query browser connection and test it, you cannot pass the prompt empty if its created as mandatory in BEx, please check that also.
--SumanT

Error(XLS 000006) while using .UNX universe in dashBoard Designer.

Hii Expert,
I have created a .UNX universe based on Excel Workbook using IDT and its working fine while i am running it in The Repository Area of IDT,
But When i am going to use this Universe inside DashBoard Designer for designing the DashBoard,using Query Browser, it is showing the Error
Universe Axyzwtyzst.. not found(XLS 000006). the dataSource can not be generated for the <Universe Name>.
if you have any Idea Please Share your views on this issue.
Regards
Prakash

Hi Nakul,
Thanks for your Reply, Although i am not sure about your Reply, But One more Issue is that when i am going to Create a Webi Report using the Same Universe(i.e unx created on Excel), It also gives Error Like
Database Error:[Microsoft ][ODBC Driver Manager] Data Source Name Not Found and no Default driver Specified. (IES 10901)(WIS10901)
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Database error: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified. (IES 10901)
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
     at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
     at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:419)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:431)
     at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.run(DataProviderServiceImpl.java:192)
     at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.run(WorkspaceServiceImpl.java:346)
any Idea please ?
Thanks
Prakash

Password Caching in SALT when using Basic Authentication?

We are experiencing an issue in which a user changes their logon password using a thick client application, but is unable to use the changed password when connecting to the same password store through the SALT gateway.
We suspect that either the browser or the SALT Gateway itself is caching the password. How is this designed to work? Do we have to send something in the header to force it use the password being sent?
We suspect the user is submitting the logon request from an existing browser window which authenticated against SALT prior to them changing the password in the thick client.
Thanks
Amin

As far as I know, vendors are not required to rely on a JAAS LoginContext to perform BASIC auth. Different vendor implementations may do different things. So you may have to rely on a programmatic logout API, but I'm not personally aware of any standard API for this.

Error in portlets while using Basic Authentication

Similar Messages

Maybe you are looking for