Error in Project Progress Config and process steps

Hi experts,
I am implementing PS for Asset procurement, in this i will procure material against material component which is added in Internal activity. I am using scheduling also. Now My client requirement is that he want project progress report on cost basic.
I am using CJ40, CJ30 and CJ32.
IN IMG i have configured like given below
1. I have created Progress version 100
    EV base - Cost Plan ( active Proejct, Annual Value)
    POC weighting - Weight
    Planning type - Basic dates
    Early/Late - Earliest Possible
    Actual method and Ref plan method tick.
2. Measurement method -
   for cost based report i have selected - Cost proportional
3. Default value for measuremnt method -
    100 -WBS element - Plan - Cost proportional
    100 - WBS element - Actual - Cost proportional
    100 - Acitvity ( int)- Actual - Cost proportional 
    100 - Acitvity ( int)- Actual - Cost proportional 
I have put this in CJ20N. I followed following steps
1. CNE1
2. CNE5
but it is showing 0 value in all tabs such as Aggregate planned percentage of completion, Non-aggregated planned percentage of completion
can anyone tell me the total process to get this report perfectly. It is very urgent need so please help me guys.
Thanks,

Hi,
1) in wbs goto progress tab for enter version plan ,give ur method and actual also give your method  poc weightage give 1
2) in activity go to progress tab enter your version, give your method for plan and actual give the work measurement method and weightage give 1
3) now confirm the activities if partial confirmation enter the degree of processing (%).
4) goto progress calculation screen and give your project number and select with hierachy and with orders. enter the month and year.
5) excute,
6) goto the report and check the report.
if still not working send screen shot of the report.
Thanking you
Vengaiah Chowdary

Similar Messages

  • Prcoess chain failrure at AND process step

    Hello,
    I have a global process chain wherein we are loading data from two infopackages and that is then followed by an AND event for further data activation steps.
    This chain has been working fine for months. All of a sudden, for the past three nights in a row, the AND event has been throwing an error as soon as the first of the initial local chains completes. The error is 'This AND process is not waiting for event RSPROCESS, parameter...,' and then it goes on to give the parameter associated with the predecessor chain that has completed. The AND event turns red and does not trigger the subsequent processes when all of the predecessor chains complete. Also, the repeat option does not work. The subsequent processes have to be kicked off manually.
    Any suggestions for how to correct this problem?
    Thanks!

    Hi,
    I know problem is solved by new creation.
    But check these notes:
    Correction: Error in AND process after restart
    SAP Note Number: [1083103|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler]
    SAP Note [850668|https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=850668] Correction: No multiple triggers after RSPROCESS event
    Regards
    Andreas

  • Abap to mass create business scenarios, business process, and process steps

    HI,
    Really struggling to figure out how to mass create "folders" in the business blue print structure.      Periodically we will need to add in a new business scenario with everythign associated with it.  the business has already written up all the information in excel sheets and we would like to avoid having to manually enter this data every time..   These scenarios and process etc are project specifc.
    Has anyone done this before? I have been playing with SOLAR_STRUCTURE_CREATE and while i can see the lines being added into table, i can't get anything to appear after wards in SOLAR01.
    Any and all help greatly appreciated
    Sara

    Hello.
    I was searching how to use the program RS_SOLAR_IMPORT_STRUCTURE for mass create business scenarios in Solar01.
    I saw you was in the forums about this. Do you got to do?
    Can give me this development?
    Thank you for your help.

  • Pl tell me config and process of return PO to vendor via shipping

    Hello,
    My sloc is HU- Warehouse managed. I am creating a scenario of return purchase order to vendor using 161 Movement type. I have created a PO with 161 movement type. But whenever I am using MIGO with reference to return PO, OBD is created with customer. But I want OBD to be created for vendor because we are returning the delivery to vendor and not customer. I have done all the setting in vendor master of return delivery to vendor in purchasing view.  Please provide me step by step process of configuration and business process of written PO to vendor via shipping.
    Thanks
    Milind

    Hi,
    Pre requisites Vendor return Via return PO and delivery.
    1. You must create a customer master record for the vendor and assign the same in vendor master u2013Control view
    2. In vendor master u2013purchasing view flag the Returns Vendor check box.
    3. Maintain shipping point determination (OVL2)
    Refer below link for config
    [http://help.sap.com/bp_blv1600/BL_US/Documentation/Scenarios/V3I_BPP_EN_US.doc]
    Regards,
    Vikas

  • Error opening  form(HCM Forms and Process) in ESS

    Hi,
    Im getting following error when im trying to open form from ESS.
    The following error text was processed in the system IED : Web Dynpro application /PAASRFORMSTEP/EDITFORMAPP does not exist .
    I have created Resource and assigned it to Service through SPRO
    Resource Parameters:-
    Directory Path   = paasrformstep
    Object Name     = EditFormApp
    URL Parameter = sap.xss.disablehdr&Process=Process Name
    also i have given PCD of the Page in URL of Page
    Service Parameters:-
    Service Type     =  WebDynpro Java Application
    Link Resource   =  Reasource Name
    Proxy Class       =  CL_HRASR00_PROCESSES_AREAPAGE
    Please let me know if im missing anything
    Thanks,
    Santosh

    Hi Santosh,
    1. Check whether namespace sap.com/paasrformstep even exists on your portal. Take a look at the content administrator of WebDynpro Tools. Should be "http://server:port/webdynpro/dispatcher/sap.com/tcwdtools/Explorer"
    2. Make sure you don't have any Typos in the Service-Name of your iView (case sensitive!)
    3. Check your NWA monitoring trace log where you can see the java stack and see where the error actually occurs.
    Also, maybe this thread helps:
    Web dynpro abap login ,WebDynpro Exception: Application // Does Not Exist
    best regards, Lukas

  • Mandatory fields error messages in HCM forms and processes

    Hi,
    This may sound to be a very simple problem but I am unable to get to the root of the issue and thus need an expert advise here.
    I have created several forms in the system out of which one is an OM form using SAP_PD service for create position. There are few mandatory fields in the form scenario such as
    TITLE
    ABBREVIATION
    EMPLOYEE GROUP
    EMPLOYEE SUBGROUP
    As expected, system issues an error message if these field are left out blank but the error message is generic for all the fields and is missing the field name.
    Actual Error Message
    Complete the required entry field ""
    Expected Error Message
    Complete the required entry field "Employee Group"
    Complete the required entry field "Employee Subgroup"
    However, there are couple of fields in the form scenario which issues a correct error message
    Complete the required entry field "Object abbreviator" (P1000-SHORT)
    I am unable to identify the difference between the couple of fields that issues a correct message and rest 20 other fields which doesn't.
    Regards,
    Murtuza Kharodawala

    No, if I enter all the mandatory fields on the form then there is no problem. It allows me to move ahead and submit the form successfully.
    As recommended by Siddharth, I tried debugging the message class and what I observed was it passes the complete_fieldname value as Personnel Subarea (I1008_BTRTL) and system expects it to be I1008-BTRTL.
    SAP as a fallback tries to read description from the table T5ASRFSCNFLDT but it has a_form_scenario as blank and complete_fieldname has a concatenated value "Personnel Subarea (I1008_BTRTL)" instead of "I1008-BTRTL".
    Not sure what am I missing which causes it to have this wrong error message.
    Regards,
    MK

  • Lock box config and process to test with test files

    hi gurus,
    can anyone help me in providing documentation and test file( BAI fomat) totest  the functionality.
    My client wants to delevelop this functionality.
    thanks in advance..
    regds,
    ram

    hi
    Lockboxes are a procedure used mainly in the USA to enable checks to be deposited more quickly. The checks the bank sends to you are entered as credits by the bank, and the information entered is sent to the payee using File Transfer. The lockbox files must be formatted per the BAI standard format.
    Under certain circumstances, the bank transmits a data carrier to the payee several times a day; the carrier bears the important check information.
    From this data carrier, postings are then generated for accounts receivable and G/L accounting.
    Lockbox service has the following advantages for the payee:
    Better liquidity, thanks to faster collection, depositing, and crediting of checks
    Reduced processing workload
    Procedure
    To import lockbox data, proceed as follows:
    Choose Incomings ® Lockbox ® Import.
    You reach the initial screen.
    Specify the path and file name of the lockbox file.
    Specify the import options.
    Choose Program ® Execute.
    ===========================================================
    From the SAP Easy Access Screen select Accounting ® Treasury ® Cash Management ® Incomings ® Lockbox ® Postprocess or Accounting ® Banking ® Incomings ® Lockbox ® Postprocess.
    2. Enter the required data and choose Execute.
    The selected lockbox data is displayed in a hierarchy. The icons in front of each line show the status of the check. The following are possible status entries:
    ¡ Posted
    ¡ Posted on account
    ¡ Partially applied
    ¡ Not posted
    Proceed as follows to display the check status:
    a. Choose View ® Other Display
    The screen for displaying lists appears.
    b. Click on the ALV icon Layout settings and choose Change layout.
    c. Select the Check Status field in the dialog window under Column List.
    d. If you want to use the field in the column list, click on the left arrow and choose Copy.
    The system displays the check status.
    3. Edit Payment Advice
    ¡ In order to edit the payment advice, double-click on the Payment Advice field in the list display. Change the data you want to correct, save and choose Back.
    ¡ If you want to change the account or account type, show the Account and Account Type fields as described for the Check Status field. Both fields are shown in the list display and you can change them directly. Choose Enter to save the changed data.
    If you want to ensure that your changes have been saved, double-click on the Payment Advice field and choose Payment Advice ® Header.
    4. Choose Checks ® Post to resume the automatic posting of changed checks.
    Hope this helps. please assign points.

  • "Returns" indicator in PO and processing steps

    Hi,
    Can somone please explain or show me where I can find documentation that will show all the steps from creating a PO with the return indicator ticked to finally creating the credit memo. The parts in between, creating deliveries etc are not as clear, any help would be appreciated.
    Thanks

    use this link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/69/1b8550950111d2ac740000e829fbfe/frameset.htm
    to create p.o go to me21 /me 21n after the plant /storage location/there will be R tick the box
    G.Ganesh Kumar

  • Self Check and Your self check printing process steps and program in SAP

    Hi  SAP-FICO's
    My client required  in SAP-ECC-6.0
    1.Self Check printing for cash withdrawel 
    2. your self check for one Vendor or group of vendors  for getting DD from the Bank
    3.How to issue  the  same check for more than one vendor   and get debited through F-53 bank payment
    Can any one give idea and process steps  to  resolve the above three issues .
    Thanks in advance.
    Thanks &regards
    maalik

    Hi
    Can any one can provide the process steps.

  • Project is currently being processed Problem

    Hi Friends,
    I am creating projects using BAPI 'BAPI_PROJECTDEF_CREATE' and passing these Projects to BAPI  'BAPI_PROJECT_MAINTAIN'
    for creating WBS elements.  but when i am uploading legacy data throuch my program to create projects and WBS elemets throrch IDOC Process, sometimes i am getting an IDOC ERROR is " Project is currently being processed " is coming in IDOC status 51. but when i am see in proj table the failure idocs projects are created.
    i am written 'BAPI_TRANSACTION_COMMIT' only after  BAPI 'BAPI_PROJECTDEF_CREATE not for BAPI BAPI_PROJECT_MAINTAIN.
    so if i  write 'BAPI_TRANSACTION_COMMIT' after  BAPI 'BAPI_PROJECT_MAINTAIN' the above error will be solved?
    Kindly advice.
    Regards,
    Kumar.

    Hi,
    This is a very common problem in PS (Project Systems) during the creation of projects. Actually the cause of this is, once you have created the project, there are a number of database updates going on in the background corresponding to the new project that has been created. Even before all these updates are over, your program is calling the function module to create the WBS elements under it. Hence the message comes as the 'Project is currently being processed by 'user ID (your user ID)'.
    In order to avoid this keep a 'Wait until 2 seconds' statement after you have used BAPI_TRANSACTION_COMMIT' for project creation and before calling the function module to create WBS elements under the project. This will solve the problem.

  • Reading multiples files from a folder and processing

    Hello everyone,
    Im working on a project to analyst and process Acoustic Emission Signals. My problem is that I have a folder that containts several files .txt. Every file contains 16 waveforms (16 channels) that I need to process with an equation to detect the arrival times of the waves.
    I have been working in this way : Running the labview code that open the file that I select .. then the processing happens on every wave and I click stop to select the file where I want to save the solutions. The solutions is only a vector of the 16 arrival times detected. Then I have to stop the code (by clicking Abort Execution) and repeat the process ... Run the code and bla bla bla .. and save on the same solution file that I used before.
    The ideal situation is to read the files whitout stoping the execution of the code .. For example clicking a buttom to pass to the next file and saving all the solutions to the same file. That is beacause sometimes Im going to have more than a 100 files and this will give me a hard time if a forget in which file I was working. The idea is to make an automatic process.
    Please .. I have been trying to find a solution to this while Im working in other part of the code. If someone could suggest me a solution it would be great.
    Thanks.

    Hello everyone,
    Well Im sorry if I didn't post my .vi ... I was working on it ... and I found a solution (whit some help that I found on the forums) but Im not happy at all ... because I still have to give the last part of the file name.
    For example at the beginning I have to input the file name without the final number of the event ...
    C:\Users\Irish\Desktop\Hydraulic Fracturing\E1_evento
    then I finish adding the file number that I want to process on the folder
    C:\Users\Irish\Desktop\Hydraulic Fracturing\E1_evento2.txt or 9.text or ... just the number ...
    This is the case when I want to process every file specifying the file .. but what could you suggest me to do process all the data file by file ?
    I attached the part of the code that Im using for this specific problem ...
    Im using Labview 8.5
    Thanks ...
    Message Edited by Alvaro_Ortiz on 08-26-2009 03:14 PM
    Attachments:
    MultReadFiles.vi ‏58 KB

  • Problem with AND processer in process chains

    Hi friends,
    In BI 7.0, when creating a process chain by linking 2 DTPs with AND processor,
    two AND processor are showing.
    Can anyone please suggest how to get only one AND processor after combining also.
    babu

    Hi Babu,
    You can remove one AND process step from the design.
    (Right click on the process step and Remove Process)
    Connect two DTPs with the remaining AND process step, Save and Activate.
    This will solve your problem.
    Regards,
    Sreedhar

  • Finding process steps from BPR - some process steps missing SAP tcodes

    In Solution Manager 4.0, we are currently focusing on the documentation part and our teams have defined their respective hierarchies, scenarios, processes, and process steps.
    When looking at our process steps, we are trying to download it from the BPR but it seems such an uphill battle to find the right process step in there and if you think you have it there are no transactions behind it.
    My questions are:
    1. Is there any way I can find a process in the BPR by transaction code so it will show processes by transaction code?
    2. Any tips of finding the right process in the BPR?
    3. If we are to manually add the process steps and the transactions by process step, what do we lose? In the structure tab of the business process, the source and original name will not be populated but looking at the transaction tab of the process step, after manually added, it looks fine. Will this at all influence getting the customization (configuration) items in SolMan?

    Dear all,
        The best way to find the process step in sol Man BPR is:
    Let us consider one scenario:
    You want to find business process step "Run MRP" from BPR. If you want to execute this process step, the relevant t.code is MD01. ( Let us assume You know this t.code already by memory).
    Now enter this t.code in Sol Man, at business process step level. If you enter this t.code, automatically, the system will give you the "Description of the t.code (as a text)".  This text is automatically fetched from BPR content. Copy this text & search in BPR.
    Now , the system will properly highlight the t.code (MD01) from BPR. Now select the process from BPR.
    Regards
    Senthil

  • Performance Management - Transporting "Define Tabs and Process config"

    Good Morning Experts,
    We are moving from Development into our PPT (pre-production test) environment and have successfully transported the Performance management category settings/values, as well as the Template itself.
    Upon executing the Performance Management toolset from the portal side, I see that my tab configuration for the template did not transport.  I have searched high and low for any reference to transporting this config step, but have been unsuccessful, thus this post.
    Does anyone have any suggestions for transporting this configuration.  As you know the IMG Personnel Management > Personnel Development > Objective Setting and Appraisals > Define Tabs and Process Configuration for Template launches a webdynpro app to make this configuration step, so saving these setup selections is the only option.   How can I force these changes across ? I look forward to your responses !
    Chris Thomas
    Duke University and Health System

    All - the solution:
    SAP Note 1428054, implement the corrections according to the note.
    Run the report, RHHAP_Transport_tab_config which will generate the transport containing entries from tables:
    hrhap_tab
    hrhap_tab_data
    hrhap_tab_t
    Basis implemented, I ran report,  transported the tabs and and all is well. 
    Chris

  • HCM Form and Process ERROR No error agents maintained in table T5ASRERRORAG

    Hi All,
    I am setting up HCM form and Process  and I am done with Setting up new scenario and form and workflow steps. When I do the check consistency for Processes I get these 4 error below and not sure what do i do about these error
    No error agents maintained in table T5ASRERRORAGENTS
    Case type for Step Object H_SO is not defined
    Case type for Scenario Obj. H_FO is not defined
    Case type for Process Object H_PO is not defined
    Any help will be appreciated.
    Thanks,
    -Ashwani

    Some elaboration would help here a LOT! Would it be possible to get some more info about it?
    I am following this tutorial: http://help.sap.com/saphelp_erp60/helpdata/EN/42/f273461e5132c3e10000000a1553f6/frameset.htm
    and didn´t find any "sub-chapters" about this. am I missing something? Or could you tell me the number of the tutorial step which I performed in a wrong way or did NOT performed?
    Thank you, cheers Otto

Maybe you are looking for