Error in READ_TEXT FUNCTION when transporting(re:scripts)

Hi Experts,
i have got error in read_text when transported to QA.
ERROR: Read with READ_TEXT(FORM TXT Y99ENMM_PUR_ORD SAP b) failed
where "b" is not a system defined language.
what should i do now ? if i look in STXH table i could see 47 entries all of different languages except for "b" it says not a
system language how should i get rid of it?
Edited by: Pradeep akula on Jun 25, 2008 9:14 AM

Hi Pradeep,
'b' is not a language. Try it with language 'en'.
&***********Reward point if helpful*************&

Similar Messages

How to Avoid Errors in Max Function When Data Contains Blank Cells

I have a column with duration values. However, it also contains some blank cells. These "blank cells" have formulas in them, but as the cells they reference too are blank the formula doesn't produce a result.>/p>
I want to get the max value from this column. When I simply do =MAX(column-name) I get an error, presumably because some of the cells are blank. This table is going to be highly dynamic, so I don't want to limit the range of the MAX() function to only those cells with values.
So does anyone know a solution for this, please? If I was some how able to create a formula which returned the range of cells with actual values, then I could use that in the MAX() function. Or, if I could somehow tell the MAX() function to ignore blank cells, but I'm not sure either of these are possible.
Thanks,
Nic

I don't see a problem with "blank" (null string) cells mixed with duration cells. MAX works fine with this mix of cells. But if the "blank" cells are numbers, not text, that gives an error.
A formula always produces a result. A formula cannot result in a blank cell. The closest you can get to "blank" is a null string (the result of two quotes next to each other with nothing between them) . So the question is, what is the result that you are calling "blank"?

Showing error in read_text function module

- Forcast ID Number: Read function module READ_TEXT where ID = Z001, Object = VBBK to get the Forcast ID. Display it on the output.
CALL FUNCTION 'READ_TEXT'
      EXPORTING
      CLIENT                        = SY-MANDT
        ID                            = 'Z001'
        LANGUAGE                      =
        NAME                          =
        OBJECT                        = 'VBBK'
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
      TABLES
        LINES                         =
    EXCEPTIONS
      ID                            = 1
      LANGUAGE                      = 2
      NAME                          = 3
      NOT_FOUND                     = 4
      OBJECT                        = 5
      REFERENCE_CHECK               = 6
      WRONG_ACCESS_TO_ARCHIVE       = 7
      OTHERS                        = 8
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
its showing error---unable to interprete OBJECT.possible cases of spelling or comma error

Look at the Bold ones ... U need to give values for
language and name
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = 'Z001'
LANGUAGE = ' '
NAME = ' '
OBJECT = 'VBBK'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
LINES =
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Error in FM DDIF_NAMETAB_GET when deleting BI objects via transport request

Dear all,
when importing a transport request in which several types of BI objects are deleted (Infocubes, DSO's, transformations, routines, DTP's, query elements, infosets, process chains). The import terminates only when transporting from acceptance to production with return code 12 due to an uncaught exception:
Transporting from development to acceptance did not raise this exception.
The ST22 dump (see below) refers in the "contents of system fields" section to a DSO, and to post-import activities. The DSO and the associated tables could not be found (rsa1 & se16), since they are deleted as desired.
Some of the relevant notes that I have found do refer to DSO related problems, but they all indicate to install SP19 which we already have installed (BW 7.0 Patch Level 23)
Could you please assist in pointing out potential solutions based on the information from the ST22 Runtime Error below?
Kind regards,
PJ
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RS_PROGRAM_ERROR
Date and Time          08.02.2011 10:48:14
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
    along the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CL_RSDD_DS====================CP' has to be
    terminated.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
    and therefore caused a runtime error.
    The reason for the exception is:
    Error in BW: Error in DDIF_NAMETAB_GET
How to correct the error
    If the error occurs in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
    "CL_RSDD_DS====================CP" or "CL_RSDD_DS====================CM001"
    "APPEND_DS_TEC_FIELDS"
System environment
    SAP-Release 700
    Application server... "dp1ci"
    Network address...... "<removed>"
    Operating system..... "HP-UX"
    Release.............. "B.11.23";
    Hardware type........ "ia64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 45
    Shortdump setting.... "full"
    Database server... "spisap02"
    Database type..... "ORACLE"
    Database name..... "DP1"
    Database user ID.. "SAPBIW"
    Terminal................. " "
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Dec 14 2009 20:47:35"
    create on........ "HP-UX B.11.23 U ia64"
    Database version. "OCI_102 (10.2.0.1.0) "
    Patch level. 236
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 700
    Operating system..... "HP-UX B.11";
    Memory consumption
    Roll.... 5979936
    EM...... 0
    Heap.... 1459888
    Page.... 40960
    MM Used. 6988880
    MM Free. 415648
User and Transaction
    Client.............. 000
    User................ "DDIC"
    Language key........ "E"
    Transaction......... " "
    Transactions ID..... "4D5111661004210BE10000000AFA2502"
    Program............. "CL_RSDD_DS====================CP"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    Termination occurred in the ABAP program "CL_RSDD_DS====================CP" -
     in "APPEND_DS_TEC_FIELDS".
    The main program was "RDDEXECU ".
    In the source code you have the termination point in line 61
    of the (Include) program "CL_RSDD_DS====================CM001".
    The program "CL_RSDD_DS====================CP" was started as a background job.
    Job Name....... "RDDEXECL"
    Job Initiator.. "DDIC"
    Job Number..... 10475900
Source Code Extract
Line SourceCde
   31         RAISE EXCEPTION TYPE cx_rs_program_error
   32           EXPORTING
   33             text = 'Invalid DSO subtype'.                   "#EC NOTEXT
   34     ENDCASE.
   35
   36 *   get table name from DDIC
   37     CALL METHOD cl_rsd_odso=>get_tablnm
   38       EXPORTING
   39         i_odsobject = n_infoprov
   40         i_tabt      = l_tab
   41       IMPORTING
   42         e_tablnm    = l_tablnm
   43       EXCEPTIONS
   44         OTHERS      = 1.
   45
   46     IF sy-subrc <> 0.
   47       RAISE EXCEPTION TYPE cx_rs_program_error
   48         EXPORTING
   49           text = 'Error in CL_RSD_ODSO=>get_Tablnm'.        "#EC NOTEXT
   50     ENDIF.
   51
   52     CALL FUNCTION 'DDIF_NAMETAB_GET'
   53       EXPORTING
   54         tabname   = l_tablnm
   55       TABLES
   56         dfies_tab = l_t_comp
   57       EXCEPTIONS
   58         not_found = 1
   59         OTHERS    = 2.
   60     IF sy-subrc <> 0.
>>>>>       RAISE EXCEPTION TYPE cx_rs_program_error
   62         EXPORTING
   63           text = 'Error in DDIF_NAMETAB_GET'.        "#EC NOTEXT
   64     ENDIF.
   65
   66
   67   ELSE.
   68 *   model table only needed for standard datastore objects, for
   69 *   write optimized DSOs target table is a changelog that is fully described by
   70 *   dta_pro (infoobjects)
   71     CHECK n_s_dta-odsotype = rsdod_c_type-standard.
   72
   73 *   get model table fields to add
   74     CALL METHOD cl_rsd_odso=>get_mod_tab
   75       IMPORTING
   76         e_mod_fld_ur = l_t_comp.
   77   ENDIF.
   78
   79 * according to T.B. ( 13.04.2007) the correct position is
   80 * not needed in the D version
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY E
SY-MSGID DA
SY-MSGNO 300
SY-MSGV1 /BIC/AV_AMOFCB40
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20110208
SY-UZEIT 104759
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASET

Hi All
We are also experiencing this same error when transporting deletions of multiple objects.
Although the transport was cancelled in the destination system (production) it appears to have largely deleted all objects successfully except for DSOs.
The DSOs still appear in the table RSDODSO (via SE11) but are not visible anywhere else. When you try to view the DSO via RSDODS a warning appears saying "DataStore object to be deleted by transport -> delete only allowed". If you try to delete them in this transaction the same ABAP runtime error as the transport appears.
Any assistance would be greatly appreciated!
Regards
David

Permission Denied Error when calling Matlab script from LabWindows/CVI

Hello,
I am reading in data from a DAQ and am writing it to a .csv file in LabWindows/CVI. I am then sending this data to Matlab to be filtered. I would like the filtered data to be accessed by LabWindows/CVI so that I can display it as a strip chart. I have gotten everything to work except the writing to a file in a Matlab script that is called from LabWindows/CVI. I am basically using the shipped example in found in the activex demo. (http://zone.ni.com/devzone/cda/epd/p/id/2994). I select the script that I want to run and each time it tries to open a file with write permissions I get a "Permission Denied" error. This occurs when using fopen() in Matlab. I have also tried using csvwrite() as well as dlmwrite(). Each one gives me a similar error. The script currently does not try to do any data processing. It just opens the file, if it is successful it then prints "hello" and then closes it. The script works well when it is run in Matlab, just not when it is called in LabWindows/CVI. Below is the script. Any thoughts, comments or suggestions are greatly appreciated. I am also open to using other approaches for sending data between Matlab and LabWindows/CVI. Thanks in advance!!
fclose('all');
[file, errmsg] = fopen('out.txt', 'w');
if(file<0)
   disp(errmsg)
else
   fprintf(file, 'hello');
   fclose('all');
end;
[file, errmsg] = fopen('out.txt', 'w');
if(file<0)
disp(errmsg)
else
fprintf(file, 'hello');
fclose('all');
end;

I am using Windows 7. I am running CVI as an administrator and was able to get rid of the "Permission Denied" error by going into the User Account Controls in windows and changing it to "Never Notify". However, this did not fix the problem of Matlab not being able to write to a file when the script is run from CVI. In the Matlab code below, It now gets in to the "else", suggesting that fopen() returns a good file handle. After getting in to the else statement, it will not actually write to the file, nor does it create it. However, I can make changes to the plot settings and those appear. Everything is functional when run from Matlab but when run from CVI, things get screwy with opening the file for writing. It handles the read well. It seems like there would have to be some file permission errors but, in the CVI program, I open and write to the file "in.csv". Any help is greatly appreciated.
clear;
fclose('all');
t = zeros(1000);
t = csvread('in.csv');
for i=1:1000
   t(i) = t(i)*4;
end;
[file, errmsg] = fopen('out.txt', 'w');
if(file<0)
   disp(errmsg)
else
   fprintf(file, 'goodbye');
   for i=1:1000
   %t(i) = t(i)*3;
   fprintf(file, '%f,', t(i));
   end;
   fclose(file);
   plot(t/3, t);
   ylabel('t');
   xlabel('Time (s)');
   title('Is this really working?!?');
end;
Thanks,
Chris

Error when transporting ODS Object

Hi All,
I got the following error when transporting ODS object.
"The creation of the export DataSource failed"
"RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
"Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
Maybe somebody can help me.
Thanks a lot and appreciate that,
-Martin-

hi Martin,
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

Error when transporting a transformation (Update rule) BI 7.0

Error when transporting a transformation (Update rule) BI 7.0
Hi all,
Im trying to transport the transformation between the infocube 0FIGL_C10 and the ODS 0FIGL_010 from BI Dev into BI QAS. I kept getting a return code 12.
Transport message:
   Program terminated (job: RDDEXECL, no.: 18141700)
   See job log
   Execution of programs after import (XPRA)
   End date and time: 20070620181432
I go to the log and I got the following message:
Job started
Step 001 started (program RDDEXECL, variant, user ID DDIC)
All DB buffers of application server vrxsapq1 were synchronized
ABAP/4 processor: ASSERTION_FAILED
Job cancelled
Im using BI 7.0
I dont know what it is. Can someone tell what should I do or what Im missing?
Thanks a lot
Regards
Vic

Hi Victor,
check this thread may it solves your problem
Re: Error during the creation of transport request
one more thread
/message/2785863#2785863 [original link is broken]
cheers
Sunil
Message was edited by:
        Sunil John

Error when transporting Webservice from our DEV system to QA system

Hello, I created a web service from an rfc by following the wizard from Utilities>More Utilities> Create Web Service. This was created in our 030 client of DEV. I had to create two transports one client independent that was the VI and Service and one Client dependent for the actual webservice. I then transported the webservice to our DEV 200 client and all worked well. Next I transported both to our QA box, first the vi/Service transport then the webservice transport. This is not working, in our QA system, from wsadmin when trying to get the wsdl error is Could not determine wsdl address (ICF ERROR) and from wsconfig when I pull up the service definition and variant the status shows a red stop sign. Is there a trick to transporting this webservice to different systems?
I def award points for helpful answers
Cheers
Devlin

hi,
I had this problem once and in my case the service wasn't activated in SICF.
so see your service tree under /sap/bc/srt/rfc/sap/<your_service> and probably it's inactive (grayed out). right klick and activate it.
anton

I got this warning when i open a specific page on my website in IE : MuseJSAssert: Error calling selector function:Error: A security problem occurred.

Hi,
I found out when i'm in IE and go to the page 'Artists'
and i click on a name, for example: 'Abel Equipe ELA/I Gomes'
I get this warning :
MuseJSAssert: Error calling selector function:Error: A security problem occurred.
This is only in IE, not when i use Safari or Chrome
this is the website link
Any ideas how to solve this problem?

There's an invalid hyperlink on the Abel Equipe ELA/I Gomes page on a bit of text that reads "with your input." You need to find this text within Muse, clear the hyperlink and enter a valid one.

Errors when transporting query

I face errors when transporting a query. I have checked the release and import logs and have noticed the following:
Release Log:
There are 5 query elements which have been deleted
Import Log:
The query is not active only a modified version of the query is present.
I am creating a new transporting and collecting the objects not including the deleted 5 objects since they do not exist in the dev system.
The problem that I have is that the majority of the objects are locked in a BEx transport.
The only option of unlocking is each of the objects from the BEx transport, locking in my transport. Is this the way to do this or is there any consequences or a better way?
Thanks

Hi
as you have transport request with all the collected objects, follow the below steps
1) goto SE03, in left side you will have option "unlock the objects from transport"
in the next screen give the transport request and execute
now activate the query once and goto transport connection in RSA1.
here collect your query into transport request.
release it and import the same into next system.
Regards,
Venkatesh

ERROR 1708 When using a script on a Text Invitation

Whenever I use a script in Text Invitation- even if something as simple as "beep"- I receive an error that reads : Error : Error - 1708. The strange thing the script is executed successfully but I always get an error. I am using Version 4.0.2. Any ideas?

It works now !
Thanks Ralph, you put me on the right track to get it going when you mentioned the valid scripts existing in Library/Scripts/iChat.
Here are the 4 scripts needed that you must put in your Home Library- Scripts- iChat folder.
Open Script Editor in Applications/Applescript/Script Editor.app
Copy and paste these scripts, one at a time, into Script Editor window, Compile and go Menu Bar- File- Save AS and change to the appropriate name in the iChat folder mentioned above.
*iChat invited video.scpt* (Use this as title for this script)
using terms from application "iChat"
on received video invitation theText from theBuddy for theChat
set status to away
set status message to "In conference"
end received video invitation
end using terms from
*iChat invited audio.scpt* (Use this as title for this script)
using terms from application "iChat"
on received audio invitation theText from theBuddy for theChat
set status to away
set status message to "In conference"
end received audio invitation
end using terms from
*iChat started.scpt* (Use this as title for this script)
using terms from application "iChat"
on av chat started
set status to away
set status message to "In Conference . . ."
end av chat started
end using terms from
*iChat ended.scpt* (Use this as script title)
using terms from application "iChat"
on av chat ended
set status to available
set status message to "Available . . ."
end av chat ended
end using terms from
You need to set your 4 iChat Preferences- Alerts
Event: Audio invitation - Check Run AppleScript iChat invited audio.scpt
Event: Video invitation - Check Run AppleScript iChat invited video.scpt
Event: A/V Chat Started - Check Run AppleScript iChat started.scpt
Event: A/V Chat Ended - Check Run AppleScript iChat ended.scpt

Error when running child script in starter kit

Hi all,
When i playback the starter kit hr scripts it is showing the following error...
Failure when running child script hr_tsk_hr_0001a.
Can anyone tell why this error is occuring.

Glad to read you got beyond the initial URL. I can't even get beyond that. Oh well.

Error when transported to prod 0VTYPE_TEXT

Hi exp,
I got the following error when transported to prod 0VTYPE_TEXT
Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
so i tried to activate the trasformation in dev and transported,
now i got the following error
Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
Message no. RSTRAN802
can advice
kris...

Hi Meera, shashank,ashish,
i have an inactive RSDS 0VTYPE_TEXT ECPCLNT118 -> IOBJ 0VTYPE in BI prod
data source 0VTYPE_TEXT is been activated in R/3 SS and replicated to BIP as well and its active
when i tried to delete Transformations and DTP, the trnsport req failed with errors throw the message
PSA /BIC/B0000649 does not exist in log.
i observe that even though request failed with errors, DTP still deleted but not transformations.
one thing i found,
I wont be able to find 0VTYPE_TEXT (Value Type for Reporting (Texts)) under the info object 0VTYPE.
is this error cause?
i did collected all objects and transported, still errors throwing the folling messages
No rule exists
Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
Error saving Data Transfer Process DTP_D5R4V8ZJAVNAOZTO2Z9J1JTCI
thank you for advice,
krish...

Getting a error when Muse Website is viewed in browser:MuseJSAssert: Error calling selector function

Every time I open any .html file in a browser I recieve this error message; MuseJSAssert: Error calling selector function: TypeError: Object does'nt support property or method 'museMenu'

I have a similar problem that seems to have come up since the latest upgrade. My error is:
"JavaScript Alert
MuseJSAssert: Error calling selector function:SecurityError:Blocked a frame with origin "null" from accessing a cross-origin frame."
The strange part for me is that there's no error at all when using File>Preview Page in Browser. I only get the error when I File>Export Page as HTML and then try to view the output.
I can post a zip file of the HTML output to Adobe, but not publicly. Also, where is the Preview Page stored? If I don't get error on that, why can't I just use that as my HTML output?
Thanks!

Deployment Error when transporting to TEST server

Hi experts,
I'm having a deployment error when transporting my dc from development server to test server using the Change Management Service - Transport Studio.
In the error message, there is the mention of the following sentence:
=============================================
Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine ?
=============================================
But the dc is using only the standard default dcs like:
com.sap.aii.proxy.framework (default)
com.sap.aii.util.misc (default)
com.sap.exception (default)
com.sap.mw.jco (default)
tc/cmi (default)
tc/ddic/ddicruntime (default)
td/ddic/metamodel/content (default)
tc/logging (default)
tc/wd/webdynpro (default)
tc/wdp/metamodel/content (default)
So could these dcs not have been deployed on the test server ?
How do we confirm this ?
Thanks in advance.
Rgds,
Daniel

A dump of the exception i m getting.
Anyone has a clue or advice of how to overcome this problem ?
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Starting: Update: Selected development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' updates currently deployed development component 'appl/main'/'com.diagonal'/'LOKAL'/'0.2006.01.12.14.18.23'/'0'.
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: SDA to be deployed: /usr/sap/WS5/JC00/SDM/root/origin/com.diagonal/appl/main/dev_devcias_C/0/823/appl~main.sda
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Software type of SDA: J2EE
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Begin of log messages of the target system:
20081107165952 Info   :08/11/07 16:46:03 - ***********************************************************
20081107165952 Info   :08/11/07 16:46:04 - Start updating EAR file...
20081107165952 Info   :08/11/07 16:46:04 - start-up mode is lazy
20081107165952 Info   :08/11/07 16:46:04 - EAR file updated successfully for 70ms.
20081107165952 Info   :08/11/07 16:46:04 - Start updating...
20081107165952 Info   :08/11/07 16:46:06 - EAR file uploaded to server for 861ms.
20081107165952 Info   :08/11/07 16:46:07 - ERROR: Not updated. Deploy Service returned ERROR:
20081107165952 Info   :                     java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
20081107165952 Info   :                     Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
20081107165952 Info   :                          com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:681)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
20081107165952 Info   :                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
20081107165952 Info   :                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
20081107165952 Info   :                          at java.security.AccessController.doPrivileged(AccessController.java:215)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
20081107165952 Info   :                     Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1050)
20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1281)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
20081107165952 Info   :                          ... 10 more
20081107165952 Info   :                     For detailed information see the log file of the Deploy Service.
20081107165952 Info   :08/11/07 16:46:07 - ***********************************************************
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: End of log messages of the target system.
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0', grouped by :
20081107165952 Info   :Caught exception during application deployment from SAP J2EE Engine's deploy service:
20081107165952 Info   :java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
20081107165952 Info   :Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
20081107165952 Info   :     com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   : (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Finished saving the repository
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting: Update: Selected software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0' updates currently deployed software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.0.0.20061122075934''/'1'.
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0':
20081107165952 Info   :Failed deployment of SDAs:
20081107165952 Info   :development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' : aborted
20081107165952 Info   :Please, look at error logs above for more information!
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: Finished saving the repository
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Error: -
At least one of the Deployments failed -
20081107165952 Info   :end of log
20081107165952 Info   :RC of deployment: 12
20081107165952 Info   :Step SDM-deploy ended with result 'fatal error' ,stopping execution at 2008-11-07 16:59:52.0155 +9:00

Error in READ_TEXT FUNCTION when transporting(re:scripts)

Similar Messages

Maybe you are looking for