Error in SAP Web AS Connection Test

Connection Test for Connectors is successful
But
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (semdev.suzlon.com:8000)
5. The host name semdev.suzlon.com was resolved successfully.
6. The server semdev.suzlon.com could not be pinged successfully.
What culd be the pblm ?

Hi PK,
in R/3 go to SE37 and check the FM RSBB_URL_PREFIX_GET it will show the details for WAS, I believe the details you gave for WAS are fine.
Now for the issue go to T.Code SICF navigate to the webas path and activate the ping service. This will resolve the issue.
Hope This helps.
Cheers-
Pramod
Reward points if Helpful.

Similar Messages

System Configuration - SAP Web AS Connection - connection tests error

hi
I have a SAP ECC 6.04 and sap portal 7.01
When I entered in option System Administration / System Configuration / System Landscape / Portal Content Tree / Systems / SAP_ECC (System created by me)
I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
5. The host name htc-svr-erp.humantech.es was resolved successfully.
6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.
...also see a red "X" near a title SAP Web AS Connection
I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
In "old sap system", stack java + abap
http://img830.imageshack.us/img830/9755/oldsysstack.jpg
In "new sap system", stack java separated abap
http://img97.imageshack.us/img97/8627/newsysstack.png
In Portal
In "old system", I created "SAP_HCM" System
In "new system", I created "SAP_ECC" System
The "Connector" view (Object Option)
http://img706.imageshack.us/img706/3776/oldsysconnector.jpg (Old System)
http://img269.imageshack.us/img269/914/newsysconnector.jpg (New System)
*The "Internet Transaction Server (ITS)" view (Object Option)
http://img824.imageshack.us/img824/5043/oldsysits.jpg (Old System)
http://img822.imageshack.us/img822/1314/newsysits.jpg (New System)
The "User Management" View (Object Option)
http://img20.imageshack.us/img20/8646/oldsysuserman.jpg (Old System)
http://img97.imageshack.us/img97/5339/newsysuserman.jpg (New System)
The "Web Application Server" View (Object Option)
http://img101.imageshack.us/img101/6155/oldsyswas.jpg (Old System)
http://img69.imageshack.us/img69/434/newsyswas.jpg (New System)
My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
I run tcode RZ10 in backend after "Extended Maintenance"
http://img15.imageshack.us/img15/8711/oldsysrz10.jpg (Old System) (Here do not exist parameter icm/server_port_1 )
http://img512.imageshack.us/img512/9268/newsysrz10.jpg (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)
Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
also in SAP Systems, I run tcode SICF and enter in "Port Information"
http://img265.imageshack.us/img265/5281/oldsysport.jpg (Old System) (two ports)
http://img441.imageshack.us/img441/7905/newsysport.jpg (New System) (three ports)
The "Information" view (Object Option)
http://img13.imageshack.us/img13/2012/oldsysinfo.jpg (Old System)
http://img714.imageshack.us/img714/6941/newsysinfo.jpg (New System)
My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service ?
The "No Category" group (Object Option)
http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg (Old System)
http://img193.imageshack.us/img193/3800/newsysnoncat.jpg (New System) (in this System does not exist the parameter sysnr , is it correct?)
The "Permisions" Option
http://img825.imageshack.us/img825/886/oldsyspermin.jpg (Old System)
http://img243.imageshack.us/img243/2057/newsyspermin.jpg (New System)
The "Delta Link Tracer" Option
http://img716.imageshack.us/img716/798/oldsysdelta.jpg (Old System) (two levels)
http://img828.imageshack.us/img828/8057/newsysdelta.jpg (New System) (three levels, is it correct?)
the other view the same (Old Sytem and New System)
The "Connection Test" Option
http://img412.imageshack.us/img412/5789/oldsystest.jpg
http://img243.imageshack.us/img243/5237/newsystest.jpg
Edited by: Ivan Quiroz on Sep 21, 2010 12:42 PM

 Excuse me, because the message Editor has problems, I edited with html tags for best view 
 
 hi
 
 I have a SAP ECC 6.04 and sap portal 7.01
 
 When I entered in option System Administration /System Configuration /System Landscape / Portal Content Tree / Systems /SAP_ECC (System created by me)
 
 I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
 
 SAP Web AS Connection
 Test Details:
 The test consists of the following steps:
 1. Checks the validity of system ID in the system object.
 2. Checks if the system can be retrieved from the PCD.
 3. Check whether a SAP system is defined in the system object
 4. Validate the following parameters: WAS protocol; WAS host name
 5. Checks if the host name of the server can be resolved.
 6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
 7. Checks HTTP/S connectivity to the defined back-end application
 
 Results
 1. The system ID is valid
 2. The system was retrieved.
 3. The system object represents an SAP system
 4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
 5. The host name htc-svr-erp.humantech.es was resolved successfully.
 6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.*
 7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.

 
 ...also see a red "X" near a title SAP Web AS Connection
 
 I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
 
 In "old sap system", stack java + abap
 
 <a href=http://img830.imageshack.us/img830/9755/oldsysstack.jpg>Stack Java + Abap<a>
 
 In "new sap system", stack java separated abap
 
 <a href=http://img97.imageshack.us/img97/8627/newsysstack.png>Stack Java and Stack Abap</a>
 
 In Portal
 
 In "old system", I created "SAP_HCM" System
 In "new system", I created "SAP_ECC" System
 
 The "Connector" view (Object Option)
 
 <a href=http://img706.imageshack.us/img706/3776/oldsysconnector.jpg> (Old System)</a>
 <a href=http://img269.imageshack.us/img269/914/newsysconnector.jpg> (New System)</a>
 
 The "Internet Transaction Server (ITS)" view (Object Option)
 
 <a href=http://img824.imageshack.us/img824/5043/oldsysits.jpg> (Old System) </a>
 <a href=http://img822.imageshack.us/img822/1314/newsysits.jpg> (New System) </a>
 
 The "User Management" View (Object Option)
 
 <a href=http://img20.imageshack.us/img20/8646/oldsysuserman.jpg> (Old System) </a>
 <a href=http://img97.imageshack.us/img97/5339/newsysuserman.jpg> (New System) </a>
 
 The "Web Application Server" View (Object Option)
 
 <a href=http://img101.imageshack.us/img101/6155/oldsyswas.jpg> (Old System) </a>
 <a href=http://img69.imageshack.us/img69/434/newsyswas.jpg> (New System) </a>
 
 My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
 
 I run tcode RZ10 in backend after "Extended Maintenance"
 
 <a href=http://img15.imageshack.us/img15/8711/oldsysrz10.jpg> (Old System) (Here do not exist parameter icm/server_port_1 )</a>
 <a href=http://img512.imageshack.us/img512/9268/newsysrz10.jpg> (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)</a>
 
 Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
 
 also in SAP Systems, I run tcode SICF and enter in "Port Information"
 
 <a href=http://img265.imageshack.us/img265/5281/oldsysport.jpg> (Old System) (two ports) </a>
 <a href=http://img441.imageshack.us/img441/7905/newsysport.jpg> (New System) (three ports) </a>
 
 The "Information" view (Object Option)
 
 <a href=http://img13.imageshack.us/img13/2012/oldsysinfo.jpg> (Old System) </a>
 <a href=http://img714.imageshack.us/img714/6941/newsysinfo.jpg> (New System) </a>
 
 My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service?
 
 The "No Category" group (Object Option)
 
 <a href=http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg> (Old System)</a>
 <a href=http://img193.imageshack.us/img193/3800/newsysnoncat.jpg> (New System) (in this System does not exist the parameter sysnr , is it correct?) </a>
 
 The "Permisions" Option
 
 <a href=http://img825.imageshack.us/img825/886/oldsyspermin.jpg> (Old System) </a>
 <a href=http://img243.imageshack.us/img243/2057/newsyspermin.jpg> (New System) </a>
 
 The "Delta Link Tracer" Option
 
 <a href=http://img716.imageshack.us/img716/798/oldsysdelta.jpg>(Old System) (two levels) </a>
 <a href=http://img828.imageshack.us/img828/8057/newsysdelta.jpg> (New System) (three levels, is it correct?) </a>
 
 the "System Aliases" Option
 
 <a href=http://img265.imageshack.us/img265/7574/oldsysalias.jpg> (Old System) </a>
 <a href=http://img256.imageshack.us/img256/9817/newsysalias.jpg> (New System) </a>
 
 The "Connection Test" Option
 
 I based in <a href= http://img64.imageshack.us/img64/6638/essalias.jpg> ESS SAP Documentation </a>
 
 In the seven point is diference (blue box) in the <a href=http://img412.imageshack.us/img412/5789/oldsystest.jpg> (Old System) (SAP_HCM System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.) </a> and <a href=http://img243.imageshack.us/img243/5237/newsystest.jpg> (New System) (SAP_ECC System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.)</a>
 
 I desactivated Firewall in my SAP Server and reviewed in <a href=https://forums.sdn.sap.com/thread.jspa?threadID=946905>SAP Forums </a> my problem but nothing
 
 Could This error also could be the problem that I get an error in the JCO Destination?
 
 <a href=http://img819.imageshack.us/img819/826/oldsysjcosso.jpg>(Old System) (Succesfully)</a>
 <a href= http://img822.imageshack.us/img822/4226/newsysjcosso.jpg>(New System) (com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Issuer of SSO ticket is not authorized)</a>
 
 because I configure SSO correctly (I configured last year SSO in "Old System"),I run tcode SSO2
 
 <a href=http://img709.imageshack.us/img709/7194/oldsyssso2.jpg>(Old System)SSO2 Tcode</a>
 <a href=http://img830.imageshack.us/img830/9704/newsyssso2.jpg>(New System)SSO Tcode</a>
 
 <a href=http://img185.imageshack.us/img185/9279/newsyssso22.jpg>(Old System) SSO2 Tcode Details</a>
 <a href=http://img227.imageshack.us/img227/416/oldsyssso22.jpg>(New System) SSO2 Tcode Details</a>
 
 <a href=http://img530.imageshack.us/img530/8710/newsyslog.jpg>(New System) In the SAP Logs: *** J2EE_ADM_DA1 | USERMAPPING.USE | USER.R3_DATASOURCE.J2EE_ADM_DA1 | | systemtype=[(none)], system=["UMESystemLandscapeDummy"], uses strong encryption=[false], remote user ID=[(none)] ***
</a>

SAP Web AS connection Error

Hello Guru's,
we have a problem to connect our ERP (saperp) with EP (sapep).
Following is show by the coneectiontest:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (saperp.domain.com:8000)
5. The host name saperp.domaint.com was resolved successfully.
6. The server saperp.domain.com was pinged successfully.
7. The Web AS ping service http://saperp.domain.com:8000/sap/bc/ping was pinged successfully.
8. An HTTP/S connection to http://saperp.domain.com:8000sap/bc/bsp/sap was not obtained successfully; this might be due to a closed port on the Firewall.
Test Connection with Connector works fine.
Checks:
-Connectiontest to saperp port 8000 with telnet works fine.
-Service test of "http://saperp.domain.com:8000/sap/bc/ping" with browser works fine. ("Server reached successfully")
-SSO works fine
-All services for BSP are activated.
-No Firewall are present between the Systems
-ICMP are possible
-Can't find some entry's in J2ee Log's
-Sec. Audit prot. are no entry's
i have no more ideas, can someone help?!
regards
Chris

Hi,
Don't worry : these test results are meaningless. You should test a real BSP application and see if it works.
Regards,
Pierre

SAP Web AS Connection Problem

Hi Gurus,
I am now facing one problem about creating a system in EP.
My system is Netweaver 04s with AS,EP and BI with SP13. All run in one single server.
I maintained the SAP Web AS, and tested the connection, got the following message:
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (192.168.2.62:50000)
5. The host name 192.168.2.62 was resolved successfully.
6. The server 192.168.2.62 could not be pinged successfully.
Strange that the ping fails, cause all the instances are running in the same server.
"Connection Test for Connectors" works fine for me by using SSO from portal to abap.
Please give the solution.
Thanks & Regards

Hi,
You mean to say you are using IP address to login to portal. Using IP address has caused many problems. I am not sure if this would solve your issue but it is always recommended to use fully qualified domain name as host while accesssing portal. You can check using that too.
Regards,
Harini S

Error in ADF Web Service Connection

Hello everyone.
I have the following problem.
Create a "Web Services Proxy" to consume a Web Services outside the application.
Web services require authentication and create a Web ADF Services Connection to authenticate, but when you programmatically use the ADF Web Service Connection I get the following error:
java.lang.NullPointerException
 at java.lang.Class.isAssignableFrom(Native Method)
 at oracle.j2ee.ws.common.jaxws.runtime.GenericJavaType.create(GenericJavaType.java:97)
 at oracle.j2ee.ws.common.jaxws.runtime.GenericJavaType.create(GenericJavaType.java:118)
 at oracle.j2ee.ws.common.jaxws.runtime.OperationMappingModeler.processParameters(OperationMappingModeler.java:268)
 at oracle.j2ee.ws.common.jaxws.runtime.OperationMappingModeler.processMethod(OperationMappingModeler.java:155)
 at oracle.j2ee.ws.common.jaxws.runtime.ServiceEndpointRuntimeModeler.buildRuntimeModel(ServiceEndpointRuntimeModeler.java:114)
 at oracle.j2ee.ws.client.jaxws.WsClientProxyFactory.getRuntimeMetadata(WsClientProxyFactory.java:69)
 at oracle.j2ee.ws.client.jaxws.WsClientProxyFactory.createProxy(WsClientProxyFactory.java:126)
 at oracle.j2ee.ws.client.jaxws.WsClientProxyFactory.createProxy(WsClientProxyFactory.java:106)
 at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.getPort(ServiceDelegateImpl.java:219)
 at oracle.j2ee.ws.common.jaxws.ServiceDelegateImpl.getPort(ServiceDelegateImpl.java:249)
 at oracle.adf.model.connection.webservice.impl.WebServiceConnectionImpl.getJaxWSPort(WebServiceConnectionImpl.java:399)
 at edu.esade.portal.wsclient.wordpress.WordPressCliente.getDatosBlogsBndQSService(WordPressCliente.java:62)
 at edu.esade.portal.wsclient.wordpress.WordPressCliente.getDatosBlogsPortClient(WordPressCliente.java:86)
 at edu.esade.portal.wsclient.wordpress.WordPressCliente.getBlogs(WordPressCliente.java:105)
 at edu.esade.portal.wsclient.wordpress.WordPressCliente.main(WordPressCliente.java:167)
The code I use to get the connection is:
private DatosBlogsBndQSService getDatosBlogsBndQSService () {
Context ctx;
try {
ctx = ADFContext.getCurrent().getConnectionsContext();
WebServiceConnection wsc = (WebServiceConnection) ctx.lookup("DatosBlogsBndQSService");
System.out.println("wsc:"+wsc.toString());
DatosBlogsBndQSService proxy = wsc.getJaxWSPort(DatosBlogsBndQSService.class); // line 62
return proxy;
} catch (NamingException e) {
e.printStackTrace();
return null;
Finalmente la configuración del recurso es:
<Reference name="DatosBlogsBndQSService" className="oracle.adf.model.connection.webservice.impl.WebServiceConnectionImpl" credentialStoreKey="DatosBlogsBndQSService" xmlns="">
<Factory className="oracle.adf.model.connection.webservice.api.WebServiceConnectionFactory"/>
<RefAddresses>
<XmlRefAddr addrType="WebServiceConnection">
<Contents>
<wsconnection description="URL-XXX" service="{URL-XXX}DatosBlogsBndQSService">
<model name="{URL-XXX}DatosBlogsBndQSService" xmlns="http://oracle.com/ws/model">
<service name="{URL-XXX}DatosBlogsBndQSService">
<port name="DatosBlogsBndQSPort" binding="{URL-XXX}DatosBlogsBnd">
<soap username="transportUserName" password="transportPassword" addressUrl="URL-XXX" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
<operation name="consultarPosts">
<soap soapAction="URL-XXX" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
<output name=""/>
<input name=""/>
</operation>
<operation name="listarBlogs">
<soap soapAction="URL-XXX" xmlns="http://schemas.xmlsoap.org/wsdl/soap/"/>
<output name=""/>
<input name=""/>
</operation>
</port>
</service>
</model>
</wsconnection>
</Contents>
</XmlRefAddr>
<SecureRefAddr addrType="transportPassword"/>
<SecureRefAddr addrType="transportUserName"/>
</RefAddresses>
</Reference>
When the Web Service did not require authentication to work without problem, the error arises when you need to login and use the "ADF Web Services Connection", is there some other way to log in using the Web Service proxy client directly?
Any help is welcome.
Regards.
Marcelo

Hi Shay.
I not use Web service data control, I use only Web Service proxy and the client class for populate data to view object programmatically.
However, in a test class do I have this:
public class WordPressCliente {
private final static Logger logger = Logger.getLogger(WordPressCliente.class);
public WordPressCliente() {
super();
private DatosBlogsBndQSService getDatosBlogsBndQSService () {
Context ctx;
try {
ctx = ADFContext.getCurrent().getConnectionsContext();
WebServiceConnection wsc = (WebServiceConnection) ctx.lookup("DatosBlogsBndQSService");
System.out.println("wsc:"+wsc.toString());
DatosBlogsBndQSService proxy = wsc.getJaxWSPort(DatosBlogsBndQSService.class);
return proxy;
} catch (NamingException e) {
e.printStackTrace();
return null;
private DatosBlogsPT getDatosBlogsPortClient() throws Exception {
URL baseUrl = DatosBlogsBndQSService.class.getResource(".");
URL url = new URL(baseUrl,ArchivoUtil.getInstance().getPropiedad("ws.integracion.wordpress"));
QName qName = new QName("http://esade.edu/soa/servicio/DatosBlogs/v01_00","DatosBlogsBndQSService");
System.setProperty("http.username", "atsistemas");
System.setProperty("http.password", "atsistemas2011");
DatosBlogsBndQSService integracionWordpress = new DatosBlogsBndQSService(url,qName);
DatosBlogsPT wordpressPT = integracionWordpress.getDatosBlogsBndQSPort();
if (ArchivoUtil.getInstance().getPropiedad("ws.integracion.wordpress.autenticacion").equals("true")) {
System.out.println("hay que validar el WS");
BindingProvider bp = (BindingProvider)wordpressPT;
bp.getRequestContext().put(BindingProvider.USERNAME_PROPERTY, ArchivoUtil.getInstance().getPropiedad("ws.integracion.wordpress.usuario"));
bp.getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, ArchivoUtil.getInstance().getPropiedad("ws.integracion.wordpress.clave"));
DatosBlogsPT wordpressPT = getDatosBlogsBndQSService().getDatosBlogsBndQSPort();
return wordpressPT;
private DatosItemsPT getDatosItemsPortClient() throws Exception {
DatosItemsBndQSService datosItems = new DatosItemsBndQSService();
DatosItemsPT itemsPT = datosItems.getDatosItemsBndQSPort();
if (ArchivoUtil.getInstance().getPropiedad("ws.integracion.items.autenticacion").equals("true")) {
BindingProvider bp = (BindingProvider)itemsPT;
bp.getRequestContext().put(BindingProvider.USERNAME_PROPERTY, ArchivoUtil.getInstance().getPropiedad("ws.integracion.wordpress.usuario"));
bp.getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, ArchivoUtil.getInstance().getPropiedad("ws.integracion.wordpress.clave"));
return itemsPT;
public List<Blog> getBlogs() throws Exception {
List<Blog> lista = null;
try {
DatosBlogsPT cliente = getDatosBlogsPortClient();
FiltroBlogs filtroBlog = new FiltroBlogs();
ListarBlogsInput blogInput = new ListarBlogsInput();
HeaderESADE header = new HeaderESADE();
header.setUsernameESADE("");
header.setParentSOAComponent("");
blogInput.setFiltroBlogs(filtroBlog);
lista = cliente.listarBlogs(blogInput,header).getBlogs().getBlog();
} catch (ClientTransportException e) {
logger.error(e.getStackTrace());
e.printStackTrace();
ADFUtils.showMessage(Constantes.TITULO_01, Constantes.MENSAJE_01);
return lista;
public List<Post> getPostsPorBlog(String idBlog) throws Exception {
List<Post> lista = null;
try {
DatosBlogsPT cliente = getDatosBlogsPortClient();
ConsultarPostsInput postInput = new ConsultarPostsInput();
FiltroPosts filtroPost = new FiltroPosts();
HeaderESADE header = new HeaderESADE();
filtroPost.setBlogId(new Long(idBlog).longValue());
filtroPost.setFechaInicio(FechaUtil.getFecha());
filtroPost.setFechaFin(null);
header.setUsernameESADE("");
header.setParentSOAComponent("");
lista = cliente.consultarPosts(postInput,header).getPosts().getPost();
} catch (ClientTransportException e) {
logger.error(e.getStackTrace());
ADFUtils.showMessage(Constantes.TITULO_01, Constantes.MENSAJE_01);
return lista;
public static void main(String[] args) {
WordPressCliente wordPressCliente = new WordPressCliente();
try {
Iterator i = wordPressCliente.getBlogs().iterator();
while (i.hasNext()) {
Blog blog = (Blog)i.next();
logger.debug("Blog Id:" + blog.getId() + " url:" + blog.getUrl() + " nombre:" + blog.getNombre() + " publico:" + blog.isPublico() + " lang:" + blog.getLang());
try {
Iterator j = wordPressCliente.getPostsPorBlog(Long.toString(blog.getId())).iterator();
while (j.hasNext()) {
Post post = (Post)j.next();
logger.debug(" Post Id:" + post.getId() + " autor:" + post.getAutor() + " titulo:" + post.getTitulo() + " size ambitos:" + post.getAmbitos().getAmbito().size() +
" tags:" + post.getTags());
} catch (Exception e) {
e.printStackTrace();
} catch (Exception e) {
e.printStackTrace();
}

Serialization error in SAP Web Service.

Hi all,
I have exposed a custom RFC as a Web Service. This is a simple web service that returns Customer Data (from kna1) based on the Customer ID which we provide as input.
In the RFC, I have declared an internal table (G_RET) in the tables section of the RFC.
Now, while testing the web service, I can see a check box with NULL option beside the G_RET. If i check the NULL option for G_RET, I get an error.
XML Serialization Error. Array Property [Item] in class [none] must not have NULL elements. This is restricted by schema description.
This is a high priority task. Please reply to me with any solution that you may have.
Regards,
Preksha.

Your problem has nothing to do with SAP web service. When you expose a RFC function as a web service, you are defining a service contract using WSDL technologies and XML message format enforced by the schema definition associated with the data source.
When a system consume a web service it is upto that system to provide a client framework so that it can provide an implementation enforces by the WSDL contract. Contract terms in WSDL is only applicable to data types, message types, access style and ecoding.
It is upto the client framework to provide a mechanism to send and receive the data as per the contract.
In your case, you are using a Microsoft client, so MS implementation of web service technology play a big role here.
C# XML serialization class from the MS client program you are using to call the program, read the WSDL contract and try to understand the definition and terms and conditions of the messages, types, binding.
In your WSDL you may have constraints applied at each field level of the schemas associated with the input and output messages of the web service methods.
Unfortunatly the way C# XML serialization class understand the terms and condition is confusing and it create a rum time error.
Having said this all stories now let us get into practical way.
1. Test ur web service using a non MS client
2. Make sure it is working, this isolate your issues to the way client understanding the WSDL contracts.
3. Then work with some MS guys in your shop to address this issue.
From your post I hope you are a candidate having experience in working with SAP customization project. However when ever you deal with open technologies such as JAVA, Web Services, it is highly recomended to think outside the BUNN.
AS SAP move towards more open technologies such as JAVA, WSDL, SOAP, WS, XML, XSD it is very important to elaborate your knowledge beyond the scope of a customization project.
Thanks

Error in SAP Web Dynpro Iview

Hi,
We are facing problem with iviews, created using SAP Web Dynpro iView Template. Whenever user clicks on any of SAP Web Dynpro iView , portal main page is opened instead of Web Dynpro application. Same problem is encounted on preview of the iView. Everything was working fine till yesterday and suddenly we are facing this problem.
Also, iview created using Web Dynpro Java Application option are working fine.
What can be the reason behind the problem?
Need your help.
Thanks in Advance,
Apurva

Hi,
Some times we get the home page instaed of the application.
This may be due to the application is not active.
Test from se80.
If it is working fine create the iview again i think there are changes made to the application.
Thanks,
gopal

Error installing SAP Web IDE Hybrid App Toolkit Add-on 1.3.2

Hi,
I'm getting an HTTP 404 file not found error when i try to install SAP Web IDE Hybrid App Toolkit Add-on 1.3.2.
Installing "com.sap.mp.cordova.plugins.corelibs" for ios
Installing "com.sap.mp.cordova.plugins.apppreferences" for ios
Installing "com.sap.mp.cordova.plugins.toolbar" for ios
Installing "com.sap.mp.cordova.plugins.logon" for ios
Fetching plugin "com.sap.mp.cordova.plugins.authproxy" via plugin registry
npm http GET http://registry.cordova.io/com.sap.mp.cordova.plugins.authproxy
npm http 404 http://registry.cordova.io/com.sap.mp.cordova.plugins.authproxy
Failed to install 'com.sap.mp.cordova.plugins.logon':Error: 404 Not Found: com.sap.mp.cordova.plugins.authproxy
 at RegClient.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/npm-registry-client/lib/request.js:268:14)
 at Request.self.callback (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:148:22)
 at Request.emit (events.js:98:17)
 at Request.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:876:14)
 at Request.emit (events.js:117:20)
 at IncomingMessage.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:827:12)
 at IncomingMessage.emit (events.js:117:20)
 at _stream_readable.js:944:16
 at process._tickCallback (node.js:448:13)
Error: 404 Not Found: com.sap.mp.cordova.plugins.authproxy
 at RegClient.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/npm-registry-client/lib/request.js:268:14)
 at Request.self.callback (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:148:22)
 at Request.emit (events.js:98:17)
 at Request.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:876:14)
 at Request.emit (events.js:117:20)
 at IncomingMessage.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:827:12)
 at IncomingMessage.emit (events.js:117:20)
 at _stream_readable.js:944:16
 at process._tickCallback (node.js:448:13)
cmd error
The node process of the build script exited with code 1.
When i try to access the file manual i also get a 404:
{"error": "not_found","reason": "document not found"}
I'm installing IOS only on a Mac and all is fine until the error.
is there something I've missed?
Regards,
Henrik

Hi Henrik,
Which is the version of Cordova and Kapsel you are using?
Your cordova version should be 4.2.0 and Kapsel version should be 3.7.1.
Regards,
Dhani

Error #2032 SAP Netweaver BI Connection

We are experiencing intermittent #2032 connection error in qualty environment. We worked through #2032 error in sandbox and development environment by following existing posts and SAP notes. We configured qualty environment the same but continue to get the error on an intermittent basis.
Intermittent basis = Out of five test users one will fail with #2032. Retest and a different user will fail but previous user that failed now passes and does not get error.
Xcelsius Enterprise 5.3.0.0
Version 12.3.0.670
BW system: Component version: SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW: 701 release level: 0008 (SAPKW70108)
BI_CONT: 705 release level: 0001 (SAPK-70501INBICONT)
Any ideas.
thanks.

Additional facts.
The quality portal environment consists of load balancer and two servers D1 & D2. If you go directly against dashboard iView on D1 you never receive #2032 error. If you go directly against dashboard iView on D2 you receive #2032 error 40% of the time.
The following error is captured in the webserver log
Caused by: java.rmi.NoSuchObjectException: The searched object not found and the message isn't redirectable
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:261)
at com.sap.engine.services.rmi_p4.AppDispatchImpl.run(AppDispatchImpl.java:13)
SAP Gurus any ideas?

Source code has syntax error in SAP PI7.1 Mapping Test

HI All,
IN SAP P7.1 created simple two data types, message types and Message Mapping with only 2 fields. While testing the mapping in Message Mapping it is giving the error as
Source text of object Message Mapping: MM_Source_to_Target | http://abc.com has syntax errors:
Source code has syntax error:
I am able to activate the Datatypes and Message Types but not able to activate the Messge mapping.
Please if any body faced the same problem please give the solution.
One more thing is I am able to test the Message Mapping available in BASIS 7.1 Software Component objects. It is executing successfully...
but otherthan this SWC it not working success fully.....
Regards
Sridhar Goli

Hi David,
please check the default trace. It may contain the entry:
Error in compiling : java.io.IOException: Not enough space
If that's the case, maybe there's too little space for the swap file/device.
You should ensure that at least 2X (preferably 3X) of Heap (-Xmx) is configured as real swap
Hope that helps.
Regards,
Gábor Klauzer

Getting Error in Asmx Web Service Unit Testing & not able to debug unit-test Project.

I am getting below error message while running unit test for ASMX web service
Failed MyFunction The ASP.NET Web application at 'D:\MyProjectFolder' is already configured for testing by another test run. Only one test run at a time can run
tests in ASP.NET. If there are no other test runs using this Web application, ensure that the Web.config file does not contain an httpModule named HostAdapter.
I checked in web.config. Below line already added in web.config. i removed below line to run test again but getting same error message.
<httpModules>
<add name="HostAdapter" type="Microsoft.VisualStudio.TestTools.HostAdapter.Web.HttpModule, Microsoft.VisualStudio.QualityTools.HostAdapters.ASPNETAdapter, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</httpModules>
i am not able to debug unit test project.
Please "Mark as Answer" if this post answered your question. :)
Kalpesh Chhatrala | Software Developer | Rajkot | India
Kalpesh 's Blog
VFP Form to C#, Vb.Net Conversion Utility

Hi Kalpesh,
>>Failed MyFunction The ASP.NET Web application at 'D:\MyProjectFolder' is already configured for testing by another test run. Only one test run at a
time can run tests in ASP.NET. If there are no other test runs using this Web application, ensure that the Web.config file does not contain an httpModule named HostAdapter.
In your web application root, can you find a file named 'web.config.backup'?
Reference:
https://social.msdn.microsoft.com/Forums/en-US/e2ad0c20-df90-48dc-818c-8c5ec24d9365/visual-studio-test-is-not-hitting-breakpoints-in-debug?forum=vststest
Fang also shared more information about debugging the unit test for web project here:
https://social.msdn.microsoft.com/Forums/en-US/daa16086-b1b8-4917-ad8d-65e23b49e1bc/not-able-to-read-webconfig-through-unit-test-feature-by-visual-studiovsts?forum=vststest
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SOAP Response Version Mismatch error with SAP web service

My company just recently upgraded to SAP CRM 7.
The old way of creating web services in SAP worked fine, but now, there is something a bit off with SAP. When I call the web service the send returns a Fault Event with the error : SOAP Response Version Mismatch
I had a simple web service created with only 1 text input and 1 text output to make sure that it wasn't the parameters or return type. I got the same error.
Searching on the forum or the web hasn't provided with any good answer to the issue.
Any thoughts on this?

Problem solved

SAP - Web Logic Connectivity & Communication

I have been in SAP-ABAP for quite some time, all I know is ABAP & lil bit of Java
I have a requirement that needs immediate attention
In Layman terms can some one explain me
1. What is required inroder to set up connectivity between SAP ECC 6.0 to Web Logic 8.1 SP 4
2. What should I do to communicate with Weblogic to share data synchronously.
A brief description & detail info related links would be of great help.
Surely I'll leave feedback

Hello Vinod,
In order to set up connectivity between SAP ECC 6.0 to Web Logic 8.1 SP 4, you can use Iway 5.5 connector.
In Iway you can set up some communication channels. Each channel contains a Program ID (which refers to your RFC's ProgID) and the connection parameters to your SAP environment. By starting your channel in Iway, you check it in your SAP repository and the connection is established.
Let me know if you have other questions.
Micael.

System Connection Test was not fully tested but all web dynpro java app and Transaction iviews working fine.Any problem for this Kind of activity Lets give some idea.

System Connection Tests
You can test the connectivity to the backend application represented by the current system object. Choose the relevant tests.
Note: The test is based on the properties currently defined in the system object. It does not check if the system properties are correct.
System Connection Tests
Test Name
Description
Status
SAP Web AS Connection
Tests the connection to an SAP Web Application Server
ITS Connection
Tests the connection to an SAP ITS server
Connection Test for Connectors
Tests the connection to a backend system using an associated connector
Test
Clear Results
Results
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name
5. The host name ssprdxi.stylespasapnet.com was resolved successfully.
6. The Web AS ping service was pinged successfully.
7. An HTTP/S connection to was obtained successfully.
ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name ()
6. The host name ssprdxi.stylespasapnet.com was resolved successfully.
7. An HTTP/S connection to was obtained successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
regards
Antony

Hi Stefan,
This correct see SAP Note [947081|https://service.sap.com/sap/support/notes/947081]
If the locale for the Web Dynpro iView is changed in the portal (through portal personalization), this is not reflected in the running login session. The user needs to logoff and login again, in order to see the locale change in the Web Dynpro iView.
Regards,
Leo

Unable to create RFC iviews - connection test of the system failed

hello,
I always try to configure my system to run an RFC iView...
The connection of myt system is failed for 1 of the 4 tests.
i don't know why.
I have filled this fields :
- application host
- ITS host name
- ITS path
- ITS protocol
- Logical system name (not sure it's correct)
- Sap client
- Sap system ID
- SAP system number
- Server port (not sure it's correct)
- System type
- Web as host name
- Web as path
- Web as protocol
and i have this error :
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (wsapv49.dhcp.xxx.xx.xxxx:8045)
5. HTTP/S connection successful
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (wsapv49.dhcp.xxx.xx.xxxx:8045)
6. HTTP/S connection successful
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Test Connection through the DQE
Test Details:
The test consists of the following steps:
1. Checks the existence of a backend admin user ID/password in the system properties.
2. Checks the existence of a default alias for the system.
3. Checks the DQE connection.
Results
1. DQE admin user ID or password is missing in the system properties. Make sure those properties exist for this system object.
2. Default alias of the system exists.
3. DQE connection successful. If you continue to experience problems, verify the DQE admin user ID and password properties for this system object.
can you help me to end this configuration?
thanks a lot.
(reward points for helful answers...)
Adrien

doesn't work, doesn't work... :o(
I found this in "analysis" -> "Debug"
error 3 mai 2007 16:49:32:168 Failed to get connection for system final
/System/Server com.sap.portal.ivs.connectorService sap.com/irj admin ITEM-31892 Server 0 0_33638
error 3 mai 2007 16:49:32:168 (R3/BW) Failed to get connection. Please contact your admin.
/System/Server com.sap.portal.connectors.R3 sap.com/irj admin ITEM-31892 Server 0 0_33638
i found too a -BIG- file in the directories, "last block" of the file
#1.5#000D56D8CEA2005D0000001500000FC400042F9201A5E5D2#1178204046283#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Administrator#49##ITEM4531892.dhcp_J2E_3363850#admin#1a943a10f98511dbc5d6000d56d8cea2#SAPEngine_Application_Thread[impl:3]_3##0#0#Error#1#/System/Server/WebRequests#Plain###Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.tc.webdynpro.clientserver.session.CloseResponseException: The connection is closed.
Exception id: [000D56D8CEA2005D0000001300000FC400042F9201A5E071]#
#1.5#000D56D8CEA2005D0000001600000FC400042F9201A76132#1178204046383#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Administrator#49##ITEM4531892.dhcp_J2E_3363850#admin#1a943a10f98511dbc5d6000d56d8cea2#SAPEngine_Application_Thread[impl:3]_3##0#0#Error##Plain###Cannot send an HTTP error response [500 Application error occurred during request processing. (details: com.sap.tc.webdynpro.clientserver.session.CloseResponseException: The connection is closed.)]. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: An attempt to write after the stream had been closed.
 at com.sap.engine.services.servlets_jsp.server.runtime.client.GzipResponseStream.write(GzipResponseStream.java:209)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.GzipResponseStream.write(GzipResponseStream.java:193)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.writeError(HttpServletResponseFacade.java:952)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.sendError(HttpHandlerImpl.java:955)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleGeneralException(HttpHandlerImpl.java:860)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.processError(HttpHandlerImpl.java:851)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5#000D56D8CEA2005D0000001800000FC400042F9201A765B7#1178204046383#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Administrator#49##ITEM4531892.dhcp_J2E_3363850#admin#1a943a10f98511dbc5d6000d56d8cea2#SAPEngine_Application_Thread[impl:3]_3##0#0#Error#1#/System/Server/WebRequests#Plain###Cannot send an HTTP error response [500 Application error occurred during request processing. (details: com.sap.tc.webdynpro.clientserver.session.CloseResponseException: The connection is closed.)].
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: An attempt to write after the stream had been closed.
Exception id: [000D56D8CEA2005D0000001600000FC400042F9201A76132]#
and with another test connector
#1.5#000D56D8CEA200600000001800000FC400042F921D02D625#1178204505301#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/tcwddispwda#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Administrator#49##ITEM4531892.dhcp_J2E_3363850#Administrator#fd2a66f0f98611dbcb21000d56d8cea2#SAPEngine_Application_Thread[impl:3]_14##0#0#Error#1#/System/Server/WebRequests#Plain###Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.tc.webdynpro.clientserver.session.CloseResponseException: The connection is closed.
Exception id: [000D56D8CEA200600000001600000FC400042F921D02D1AE]#
#1.5#000D56D8CEA200560000001600000FC400042F921D39B77B#1178204508896#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#sap.com/tcwddispwda#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#Administrator#49##ITEM4531892.dhcp_J2E_3363850#Administrator#fd2a66f0f98611dbcb21000d56d8cea2#ID\#(J2EE3363800)ID0180043050DB10318128463979236974End.32388e30f98711dba6e6000d56d8cea2##0#0#Info##Plain###wdDoInit()-> enter#
#1.5#000D56D8CEA200560000001700000FC400042F921D3AE547#1178204508977#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#sap.com/tcwddispwda#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#Administrator#49##ITEM4531892.dhcp_J2E_3363850#Administrator#fd2a66f0f98611dbcb21000d56d8cea2#ID\#(J2EE3363800)ID0180043050DB10318128463979236974End.32388e30f98711dba6e6000d56d8cea2##0#0#Info##Plain###connectToSystem()->Selected Systemnull#
#1.5#000D56D8CEA200560000001800000FC400042F921D3BE964#1178204509037#com.sap.tc.lm.ctc.provider.configurationmanager.ConfigManagerReader#sap.com/tcwddispwda#com.sap.tc.lm.ctc.provider.configurationmanager.ConfigManagerReader#Administrator#49##ITEM4531892.dhcp_J2E_3363850#Administrator#fd2a66f0f98611dbcb21000d56d8cea2#ID\#(J2EE3363800)ID0180043050DB10318128463979236974End.32388e30f98711dba6e6000d56d8cea2##0#0#Info##Plain###getElement(String, Filter, int):NamedLocatedElement!ConfigManagerReader.SEARCH_FOR!CTC#
#1.5#000D56D8CEA200560000001900000FC400042F921D414CF2#1178204509397#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#sap.com/tcwddispwda#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#Administrator#49##ITEM4531892.dhcp_J2E_3363850#Administrator#fd2a66f0f98611dbcb21000d56d8cea2#ID\#(J2EE3363800)ID0180043050DB10318128463979236974End.32388e30f98711dba6e6000d56d8cea2##0#0#Info##Plain###wdDoInit()-> leave success#
#1.5#000D56D8CEA200560000001A00000FC400042F921E69A639#1178204528816#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#sap.com/tcwddispwda#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#Administrator#49##ITEM4531892.dhcp_J2E_3363850#Administrator#fd2a66f0f98611dbcb21000d56d8cea2#ID\#(J2EE3363800)ID0180043050DB10318128463979236974End.32388e30f98711dba6e6000d56d8cea2##0#0#Info##Plain###wdDoModifyView()-> enter#
#1.5#000D56D8CEA200560000001B00000FC400042F921E69A953#1178204528816#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#sap.com/tcwddispwda#com.sap.tc.lm.ctc.ccl.templateinstaller.TemplateInstallerCompView#Administrator#49##ITEM4531892.dhcp_J2E_3363850#Administrator#fd2a66f0f98611dbcb21000d56d8cea2#ID\#(J2EE3363800)ID0180043050DB10318128463979236974End.32388e30f98711dba6e6000d56d8cea2##0#0#Info##Plain###wdDoModifyView()-> success#
#1.5#000D56D8CEA2006E0000010500000FC400042F9231C81C6F#1178204853786#com.sap.portal.connectors.R3#sap.com/irj#com.sap.portal.connectors.R3#admin#47##ITEM4531892.dhcp_J2E_3363850#admin#e91a07a0f98711db85f4000d56d8cea2#SAPEngine_Application_Thread[impl:3]_9##0#0#Error#1#/System/Server#Plain###(R3/BW) Failed to get connection. Please contact your admin. #
#1.5#000D56D8CEA204E70000000100000FC400042F9231C90EA8#1178204853846#com.sap.engine.services.dqe#sap.com/irj#com.sap.engine.services.dqe#admin#47##ITEM4531892.dhcp_J2E_3363850#admin#e91a07a0f98711db85f4000d56d8cea2#Thread[Log_Worker_6,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/System/Server/DQE#Plain###mai 03, 2007 17:07:33.786 [SAP_HOST|4039|SAPEngine_Application_Thread[impl:3]_9] <CONNECTOR.ERROR> Error trying to establish connection to the EIS : final Connection Failed: Nested Exception. Failed to get connection. Please contact your admin. #
#1.5#000D56D8CEA200690000001E00000FC400042F92335B4C9E#1178204880215#com.sap.portal.connectors.R3#sap.com/irj#com.sap.portal.connectors.R3#admin#47##ITEM4531892.dhcp_J2E_3363850#admin#e91a07a0f98711db85f4000d56d8cea2#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#/System/Server#Plain###(R3/BW) Failed to get connection. Please contact your admin. #
#1.5#000D56D8CEA200690000002000000FC400042F92335B4FE3#1178204880215#com.sap.portal.ivs.connectorService#sap.com/irj#com.sap.portal.ivs.connectorService#admin#47##ITEM4531892.dhcp_J2E_3363850#admin#e91a07a0f98711db85f4000d56d8cea2#SAPEngine_Application_Thread[impl:3]_35##0#0#Error#1#/System/Server#Java###Failed to get connection for system #1#final#
i happy to carry my life's number one goal with another guy
(thanks, again and again)
Adrien
Message was edited by:
 Adrien Loire

Error in SAP Web AS Connection Test

Similar Messages

Maybe you are looking for