Error in schedule line

i am facing the error in schedule line
As discussed with you we are maintaining the schedules in JIT for the making the ASN delivery. But today we are not able to make delivery, but the schedule has been maintained . Pl find the attached screen shots for the error message. Pl let me know how to resolve this issue.

Error message V1 248 - Delivery/transportation scheduling cannot be carried out,
clearly states,
NA V1248
Short Text
Delivery/transportation scheduling cannot be carried out
&CAUSE
During delivery and transportation scheduling, while attempting to calculate a date, the system came across an error that prevented scheduling.
System Response
Scheduling is terminated. All dates are set to the start date for scheduling.
Procedure
First check whether the factory calendars for the shipping point and the route exist and are valid,
and whether the entry dates ( order date or material availability date ) are within the times defined in both calendars.
Then contact SAP because this must involve an error which was not known at the time of programming. Specify the environment of SD delivery and transportation scheduling as well as the calendar functions of the SAP library of functions.
Regards
JP

Similar Messages

BAPI Error: No schedule lines due for delivery up to the selected date

Hi,
I have created a program to create delivery orders with reference to sales orders using BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
After execution I get the error: No schedule lines due for delivery up to the selected date
Please help.
Thanks in advance!!!
Regards,
Sriram

hi,
this is to inform you that,
please check the schedule line date in the sales order because the date is not matching here for the BAPI to upload.
here, for example the schedule line is 4 days after and you are running BAPI today. that will mismatch no.
the same thing is happening in uploading case also.
so please check the date.
because in teh sales order if teh schedule line date is today it will accept the uploading with out throwing any errors.
regards,
balajia

Error "No schedule line due for delivery upto the selected date"

Hi Experts,
I am getting an error while creating outbound delivery for sales order.All items have same item cat and schedule line category,same customer.
The sales order have three items with delivery date of 18.09.2008.the material stock is available for all three material and there is no planned issue for these material.
In sales order schedule lines for all three items is confirmed on 18.09.2008. When I create a delivery on 04.09.2008(before the chedule line),it allows to create delivery for the two items but when I create delivery for material 3 on 04.09.2008(before the chedule line),it is giving error "No schedule line due for delivery upto the selected date" .on going to help it gives information that check whether the order item to be delivered contains confirmed schedule line.I checked the confirmed schedule line is on 18.09.2008 (though we have availbe stock on 04.09.2008).
Kindly guide me how to resolve the issue,here I want to create delivery prior to the delivery/Schedule line date in Sles order.for 2 items it works but for third it is giving error.
Is it something to do with Material group 5 in material master sales view for the 1 and 2nd mtrl it is 14 days for for the third it is 7 days?
Sarvesh
Edited by: Sarvesh Vashist on Sep 5, 2008 5:31 AM

Hi Experts,
I am getting an error while creating outbound delivery for sales order.All items have same item cat and schedule line category,same customer.
The sales order have three items with delivery date of 18.09.2008.the material stock is available for all three material and there is no planned issue for these material.
In sales order schedule lines for all three items is confirmed on 18.09.2008. When I create a delivery on 04.09.2008(before the chedule line),it allows to create delivery for the two items but when I create delivery for material 3 on 04.09.2008(before the chedule line),it is giving error "No schedule line due for delivery upto the selected date" .on going to help it gives information that check whether the order item to be delivered contains confirmed schedule line.I checked the confirmed schedule line is on 18.09.2008 (though we have availbe stock on 04.09.2008).It allows to create a OBD either I change the delivery date in sales order to 04.09.2008 or create a delivery with delivery date 18.09.208.
Kindly guide me how to resolve the issue,here I want to create delivery prior to the delivery/Schedule line date in Sles order.for 2 items it works but for third it is giving error.
Is it something to do with Material group 5 in material master sales view for the 1 and 2nd mtrl it is 14 days for for the third it is 7 days?
Sarvesh
Edited by: Sarvesh Vashist on Sep 5, 2008 5:31 AM

Updation Error in Schedule line category using 'BAPI_SALESORDER_CHANGE'

HI ,
I am using BAPI_SALESORDER_CHANGE to Update schedule line category for an order.But the issue is...the entries are updated if it is having single schedule line item,but if more than on item it is giving error in Last Record.
15192625   000200 0001 2.608.596.065               130,000 21.09.2009 ZX CP
*15192625   000200 0002 2.608.596.065                 0,000 04.02.2010 ZX CP
*EV1                  335System error: Schedule line 0002 for item 000200 does not exist
EV4                  219Sales document 0015192625 was not changed
i have written the code like below:
loop at i_ma4_etenr.
          i_salesdocument = i_ma4_etenr-vbeln.
         i_order_header_inx-updateflag = 'U'.
        r_schedule_lines-itm_number = i_ma4_etenr-posnr.
        r_schedule_lines-sched_line = i_ma4_etenr-etenr.
        r_schedule_lines-sched_type = i__ma4_etenr-ettyp .
        APPEND r_schedule_lines TO i_schedule_lines.
        CLEAR : r_schedule_linesx.
        r_schedule_linesx-itm_number = i_y16v_ma4_etenr-posnr.
        r_schedule_linesx-sched_line = i_y16v_ma4_etenr-etenr.
        r_schedule_linesx-updateflag = 'U'.
        r_schedule_linesx-sched_type = 'X'.
        APPEND r_schedule_linesx TO i_schedule_linesx.
endloop.
        CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
          EXPORTING
            salesdocument               = i_salesdocument
            order_header_inx            = i_order_header_inx
          TABLES
            return                      = i_return
            schedule_lines              = i_schedule_lines
            schedule_linesx             = i_schedule_linesx.
Thanks in Advance,
Sateesh Kumar.

Hi,
As you are facing error , so check wheather in VA02 schedule line fields have been uploaded or not initially.
If they are not uploaded then you will be facing the error.
Otherwise check:
Did you pass the X fields for the schedule lines properly. As you are changing only the schedule lines, Just pass the SCHEDULE_LINES , SCHEDULE_LINESX Internal tables.
Please also check whether anything is passed to ORDER_ITEM_INX- UPDATE field. it should be blank.
May it helps you.
Regards,
DS.

CIF -DeltaReport error 183 schedule line does not exist in R/3

Hi Expert,
In the delta report (/SAPAPO/CCR - CIF_DELTAREPORT), there are discrepancies that say error code 183, which is Schedule line does not exist in R/3..
But when we look in R3, they are actually there. So we don’t want these showing as a discrep in the delta report.
Example in ‘purchasing’, ‘confirmations’, ‘missing in R3 with external key’
If you run DELTAREPORT for purchasing, confirmation, unjustified error 183 are displayed despite of no inconsistency really exists.
Please help why these dscrepancies displayed.
we are running on SCM510.

Hello Maddy
Please go through below SAP notes -
1131469 - DELTAREPORT: unjustified error 181/183 for confirmation
794281 - Locked purchase orders missing from R/3
1022343 - Delta report displays too many errors (181)
817354 - No delete event when you delete orders in APO
Some Old SCN threads -
CCR Error 154 - Planned Order Missing in R3 wit... | SCN
CIF Problem -- Purchase Orders - Missing in R/3 with External Key
This is good document on CCR error handling.
CIF-Comparison / Reconciliation of Transaction Data
Hope this will help.
Thank you
Satish Waghmare

Schedule line error ,urgent,urgent

dea sap expert:
I have schedule line error , please help
I have part 9173191-04.
There is schedule line as below
10th Feb 72
10th Feb 72
17th Feb 172
On 23th Feb , the stock is zero.
Due to our factory want to GR early than 17th Feb.
Material planner change lastest schedule date from 17th to 10th .
After she change , schedule line as below
10th Feb 72
10th Feb 72
10th Feb 172
17th Feb 12
On 23th Feb , the stock is 12 PC.
Could you help to explain , why it generate another 12 PC .
And make there are 12PC we will never be used it.
Please help me on it .
Thanks so much.
Below is the material master information .
MRP Type             P1
Reorder Point        0                    Planning time fence 10
Planning cycle       Z05 (Friday )
Lot size             SB
Rounding value       72
Procurement type     F                    Batch entry
Special procurement                       Prod. stor. location AS03
Quota arr. usage     3                    Default supply area
Backflush            1                    Storage loc. for EP XT06
JIT delivery sched.                       Stock det. grp       REM
In-house production 0   days             Planned Deliv. Time 0   days
GR Processing Time   0   days             Planning calendar    Z05(Friday )
SchedMargin key      LOC
Safety Stock         0                    Service level (%)    97.0
Min safety stock     0                    Coverage profile
Safety time ind.     2                    Safety time/act.cov. 7 days
STime period profile

Hi,
>Wish to know when & why does the schedule line Exist tab in sales order trigger.
Schedule line is a place where you can define different delivery dates for a single line item.
Let's say, you have one line item for quantity 1000. Now if your production department and planning department saying they can deliver it in a weekly basis.(Say 250 for each week)
In that case you have 2 options.
One is to create 4 separate line items instead of original line item with different delivery dates and relevant quantities.
You can create delivery from VL01N or VL10C here for relevant line item.
Else
have 4 different schedule lines with delivery dates and relevant quantities
You can do delivery from VL10E for this case for relevant schedule line.
Same is happening when ATP is triggered, where system suggest different delivery dates as different schedule lines.
So it's based on ATP or it can be your decision as well.
>when I try to do the delivery I get an error u201CNo schedule lines due for delivery up to the selected date u201D.
This can happen for many reasons.
1 - Because the "Selection Date" you have given in the VL01N screen is not equal or greater than the "delivery date" you have maintained in the schedule lines.
Always make sure below rule.
"Selection Date" of the VL01N > "delivery date" you have maintained in the schedule lines
Therefore change the date in the "Selection Date" of the VL01N to "delivery date" you have maintained in the schedule line or forward date and try.
2 - You don't have confirmed stock.
Check your schedule line tab for "Confirmed quantity" column, if you don't have a value there, this error comes. This happens when you haven't done ATP.
Best regards,
Anupa

Schedule line error

Hello sir
i am facing the error in schedule line agreements
As discussed with you we are maintaining the schedules in JIT for the making the ASN delivery. But today we are not able to make delivery, but the schedule has been maintained . Pl let me know how to resolve this issue.
date also available , material also available
message no VL248
Regard ,
Bhaskar.k
Edited by: Lakshmipathi on Feb 10, 2012 6:38 PM
Thread Locked - Reason Duplicate Post

Hi,
>Wish to know when & why does the schedule line Exist tab in sales order trigger.
Schedule line is a place where you can define different delivery dates for a single line item.
Let's say, you have one line item for quantity 1000. Now if your production department and planning department saying they can deliver it in a weekly basis.(Say 250 for each week)
In that case you have 2 options.
One is to create 4 separate line items instead of original line item with different delivery dates and relevant quantities.
You can create delivery from VL01N or VL10C here for relevant line item.
Else
have 4 different schedule lines with delivery dates and relevant quantities
You can do delivery from VL10E for this case for relevant schedule line.
Same is happening when ATP is triggered, where system suggest different delivery dates as different schedule lines.
So it's based on ATP or it can be your decision as well.
>when I try to do the delivery I get an error u201CNo schedule lines due for delivery up to the selected date u201D.
This can happen for many reasons.
1 - Because the "Selection Date" you have given in the VL01N screen is not equal or greater than the "delivery date" you have maintained in the schedule lines.
Always make sure below rule.
"Selection Date" of the VL01N > "delivery date" you have maintained in the schedule lines
Therefore change the date in the "Selection Date" of the VL01N to "delivery date" you have maintained in the schedule line or forward date and try.
2 - You don't have confirmed stock.
Check your schedule line tab for "Confirmed quantity" column, if you don't have a value there, this error comes. This happens when you haven't done ATP.
Best regards,
Anupa

No schedule lines due

Hi Forum colleagues
Scenario:
I have created sales order with requirement class type ELVV (M.T.O), MRP was run based on sales order, production order is created, GR has been done.
Goods have finally come in stock.
Now when I try and do the delivery, it is giving me an error No schedule lines due for delivery up to the selected date
Also in schedule line tab in sales order confirmed qty is showing as 0.
I have a delivery date as 26.03.2008, however, I would like to carry out test run and do a delivery today.
Could someone help me as what I am missing?
Thanks
Kalpesh
**Points will be rewarded to suitable answer.

Hello Padmanabhan
Pls check the following:
1) The ATP Rule i.e., Checking Rule + Checking group.
While you are doing the ATP check the system will populate a screen showing the stock availability position. Here the confirmed qty will be zero.
here pls click on the Scope of check button and check the ATP Rule. here you might have clicked the button " DO not check RLT" button.
If u do this then the system will not calculate the next available date for the product and there fore the confirmed qty is always zero.
the system will confirm the qty only if sufficient stock is available during the time of the sales order creation only.
So pls Un mark this button ( if you have marked this ) and try and let us know the result.
If this has solved your question. Close the Thread and reward
points .
With Best Regards
Srini

Delivery and schedule line

Hi all,
I am trying to do a delivery for sales order, but an error "No schedule lines due for delivery up to the selected date" is showing up.I have checked the schedule line and it is confirming the material.
what would be the problem.
Plz advice.

Hi
Please check when the schedule line date are confirmed in the sales order item detals schedule line tab.
Then give the same date while creating a delivery In VL01n transaction code with shipping point.
Hope this will rectify your problem. please reward points
thanks
Kuntla

No Schedule Lines for Delivery upto selected date

Hi,
I have a scenario for Repairs order. Following are the steps of my scenario:
1. Create a Repair Order.
2. Create return delivery to recieve the faulty item.
3. Create Outbound Delivery to send a loaner item to customer (This item would be returned once the returned item is repaired and sent to customer)
4. Send the item after repairing.
5. Receive the loaner item.
When I am trying to create outbound delivery for Loaner item, i am getting an error "No Schedule Lines for Delivery upto selected date".
I have checked and verified the schedule line date.
I have checked for Confirmed Quantity.
Below are the screenshots. Please let me know how can this issue be resolved.

Hi,
With reference of your screens,I can see there is no qty in the field loner hence you are getting issue.
1.May I know ,why you have checked indicator -Repair?
because ,you are not going to repair the goods.You are just sending loner items to customer.In this case what is the use of to indicate repair ?.
Thanks,
Naren

Delivery group 001: Item 000020 contains no confirmed schedule lines

Hi,
I am getting following error message when i try to save sale order
"Delivery group 001: Item 000020 contains no confirmed schedule lines"
The item is a BOM itam and when i checked Deliverygroup for all items in BOM, it is the same for all.
Pls let me know how can i save sale order??
Thanks in Advance
Srikky

hi srikky,
delivery group stands for:
for example you have entered a BOM item in line item 20.
and it contains plenty of components in that BOM
then if you assign these delivery group at transaction level then it will combine all the components material available dates and gives one single Material availability date basing on the components feasibility.
so coming to your issue, here that delivery group's 001 is not having confirmed material availabilit date so it is throwing an error on schedule lines.
i think you should go to OVZJ and check FIXED DATE AND QUANTITY against the salesarea.
test and confirm the forum
balajia

Schedule line is missing in table YVBEP

Hi All,
We added a new custom field in schedule line tab. For which we added code in PAI and user exit MV45AFZZ. When we are adding a schedule line we are getting the following error message:
Schedule line 000010 0004 is missing in table YVBEP
Message no. V1506
The schedule line 0004 for the item# 000010 is having only 'confirmed qty' and 'rounded qty and order quantity' are both 0's. This schedule line was generated as there was no stock for the schedule line entered by user .
Please let me know what has to be done to resolve this issue.
Thanks,
Karuna.

Hi
See SAP Note 178328 - Problems due to incorrect user exits in SD.
This note says:
The Y tables play a role only for the change mode of document
processing. They contain the original status of those table entries
that have been changed during the current transaction. Therefore,
the entries in the Y table reflect the previous status of the
document in the database.
and
You add a table entry. There is only one entry in the X table
that has the update indicator I. There is no entry in the Y
table.
so, check in XVBEP that the field UPDKZ has the value 'I'.
Read carefully this note
Regards
Eduardo

S.A. schedule lines problem

We are creating schedule lines for scheduling agreement through MRP. We mainatain source list validity from 01-02-2009 to 31-12-2010. If we maintain schedule lines with ME38 beyond 31-12-2010, it is giving error. But if schedule lines are created through MRP even we are able to create schedule lines after the year 2011. How do we stop MRP generating schedule lines beyond souce list validty? any suggestions?

Hi Szabo,
Thanks for the quick reply. I have gone through the notes. But they are not resolving my problem. In our case we are getting error 06-722 when we create schedule lines manually wihth ME38. We want the same error if schedule lines are generated through MRP. any config or customisation available for this?
thanks in advance
Any suggestins on above issue?
thanks in advance
Edited by: chintu dkl on Sep 21, 2010 7:01 PM

No schedule line category could be determined during quantity adjustment

Dear sir,
i m getting this error while doing va31 plz helep me reagrding this matter?
error- No schedule line category could be determined during quantity adjustment.
Regards,
Debesh Tripathy
Regards,
Debesh Tripathy

Hi,
Go to IMG u2013 SD u2013 Sales u2013 Schedule Lines u2013 Assign schedule line categories.
Over there check the assignment of your combination.
Item category which is determined in scheduling agreement.
Then MRP type which you have given in the material master data.
So first note down these setting then check the combination of this setting in path given above.
If there is no setting made then click on the new entry.
Give the assignment of your combination and save it.
Now try to create your document in the VA31 and check whether every thing runs fine or not.
Regards
Raj.

Error in creating schedule line aggrement through BAPI

Hi All ,
I want to create schedule line aggrement (VA31) by using BAPI / FM .
I am using " SD_SALESDOCUMENT_CREATE" FM .
Here i am getting error in output when i enter shchedle line data in input .
Error is given below .
E V1 434 No schedule line category could be determined during quantity adjustment
Error only come when i want to create new schedule line ....in Changing any schedule line aggrement there is no error .
I am able to create schedule line aggrement manually .
please help .

Use BAPI_SAG_CREATE

Error in schedule line

Similar Messages

Maybe you are looking for