Error in Seeburger maaping while converting XML to EDI

Hi All,
I have developed an interface which Idoc to file. While running my scenario my Idoc is mapped to EDI Xml and in reciever communication channel when my EDI XML invokes X2E mapping it gives me below error. I have check the payload in communication channel monitoring and it does contain a value.
Here is the error. Please help
Message processing failed. Cause: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: Error: [Error:ID=3031;LEVEL=3] Field writeField(): Mandatory Field UNB.UNZ:0020[0] not filled - replace with defaultvalue : . DESCRIPTION: Field Warning: The mandatory Field [not specified][[not specified]] is not filled - it was auto filled with the defaultvalue: [not specified].
Regards
Avanish

Hi Avanishwathi,
       Mandatory Field UNB.UNZ:0020[0] not filled - replace with defaultvalue
  Looks like you are working with EDIFACT one.The mandatory field UNB.UNZ:0020 might not be getting value durig run time.So do chek the availability of the proper value in the test data.As experts said test in BICmapping designer also and make sure it works there with the test data.
Thanks,
Ram.

Similar Messages

  • Getting error while converting xml to xsd

    I am getting error"The table (citeinfo) cannot be the child table to itself in nested relations"
    at "http://www.flame-ware.com/products/xml-2-xsd/Default.aspx", while converting
    xml into xsd so i can register.
    Wherever citeinfo is there it is giving error.
    Please look at bold and suggest solution
    thank you
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <!DOCTYPE metadata SYSTEM "http://www.fgdc.gov/metadata/fgdc-std-001-1998.dtd">
    <metadata>
    <idinfo>
    <citation>
    *<citeinfo>(1)*<origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>One</sername>
    <issue>One</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    <lworkcit>
    *<citeinfo>(2)*<pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>One</sername>
    <issue>One</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    *</citeinfo>(2)*</lworkcit>
    *</citeinfo>(1)*</citation>
    <descript>
    <abstract>Easement</abstract>
    <purpose>E911 System</purpose>
    <supplinf>None</supplinf>
    </descript>
    <timeperd>
    <timeinfo>
    <sngdate>
    <caldate>20040512</caldate>
    <time>09000000</time>
    </sngdate>
    </timeinfo>
    <current>publication date</current>
    </timeperd>
    <status>
    <progress>Complete</progress>
    <update>As needed</update>
    </status>
    <spdom>
    <bounding>
    <westbc>
    -122.339</westbc>
    <eastbc>
    -121.0716</eastbc>
    <northbc>
    37.4900</northbc>
    <southbc>
    36.9086</southbc>
    </bounding>
    </spdom>
    <keywords>
    <theme>
    <themekt>Easement</themekt>
    <themekey>Easement</themekey>
    </theme>
    <place>
    <placekt>San Jose</placekt>
    <placekey>San Jose</placekey>
    </place>
    <stratum>
    <stratkt>None</stratkt>
    <stratkey>None</stratkey>
    </stratum>
    <temporal>
    <tempkt>None</tempkt>
    <tempkey>None</tempkey>
    </temporal>
    </keywords>
    <accconst>None</accconst>
    <useconst>None</useconst>
    <ptcontac>
    <cntinfo>
    <cntperp>
    <cntper>Earl Harris</cntper>
    <cntorg>City of San Jose</cntorg>
    </cntperp>
    <cntpos>Project Manager</cntpos>
    <cntaddr>
    <addrtype>Actual Address</addrtype>
    <address>801 N 1 ST</address>
    <city>San Jose</city>
    <state>CA</state>
    <postal>90000</postal>
    <country>USA</country>
    </cntaddr>
    <cntvoice>408.277.5626</cntvoice>
    <cnttdd>408.277.5626</cnttdd>
    <cntfax>408.298.8382</cntfax>
    <cntemail>[email protected]</cntemail>
    <hours>9-5</hours>
    <cntinst>None</cntinst>
    </cntinfo>
    </ptcontac>
    <browse>
    <browsen>None</browsen>
    <browsed>None</browsed>
    <browset>None</browset>
    </browse>
    <datacred>Unknown</datacred>
    <secinfo>
    <secsys>FGDC</secsys>
    <secclass>Confidential</secclass>
    <sechandl>Confidential Information</sechandl>
    </secinfo>
    <native>Microsoft Windows NT Version 4.0 (Build 1381) Service Pack 6; ESRI ArcCatalog 8.3.0.800</native>
    <crossref>
    *<citeinfo>(3)*<origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>one</sername>
    <issue>one</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    <lworkcit>
    *<citeinfo>(*4)
    <origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>one</sername>
    <issue>one</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    *</citeinfo>(*3)
    </lworkcit>
    *</citeinfo*>(4)
    </crossref>
    </idinfo>
    <dataqual>
    <attracc>
    <attraccr>All the related attributes are populated 100%.</attraccr>
    <qattracc>
    <attraccv>100%</attraccv>
    <attracce>All the related attributes are populated 100%.</attracce>
    </qattracc>
    </attracc>
    <logic>100% adjusted,modified and captured easements.</logic>
    <complete>100%</complete>
    <posacc>
    <horizpa>
    <horizpar>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</horizpar>
    <qhorizpa>
    <horizpav>2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</horizpav>
    <horizpae>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</horizpae>
    </qhorizpa>
    </horizpa>
    <vertacc>
    <vertaccr>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</vertaccr>
    <qvertpa>
    <vertaccv>2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</vertaccv>
    <vertacce>Easement accuracy is 2 ft for 3" pixel Orthophoto, 5 ft for 9" pixel Orthophoto.</vertacce>
    </qvertpa>
    </vertacc>
    </posacc>
    <lineage>
    <srcinfo>
    <srccite>
    <*citeinfo>(5)*<origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>one</sername>
    <issue>one</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    <lworkcit>
    *</citeinfo>(5*)*<citeinfo>(6)*
    <origin>MRF</origin>
    <pubdate>20040512</pubdate>
    <pubtime>09000000</pubtime>
    <title>BAS_EASEMENT</title>
    <edition>1</edition>
    <geoform>vector digital data</geoform>
    <serinfo>
    <sername>one</sername>
    <issue>one</issue>
    </serinfo>
    <pubinfo>
    <pubplace>San Jose</pubplace>
    <publish>CITY</publish>
    </pubinfo>
    <othercit>None</othercit>
    <onlink>www.mrf.com</onlink>
    *</citeinfo>(5)*
    </lworkcit>
    *</citeinfo>(6)*
    </srccite>
    <srcscale>24000</srcscale>
    <typesrc>FTP</typesrc>
    <srctime>
    <timeinfo>
    <sngdate>
    <caldate>20040512</caldate>
    <time>09000000</time>
    </sngdate>
    </timeinfo>
    <srccurr>publication date</srccurr>
    </srctime>
    <srccitea>Unknown</srccitea>
    <srccontr>MGE dgn contains easement data.</srccontr>
    </srcinfo>
    <procstep>
    <procdesc>Easement data is reprojected from NAD27 to NAD83.
    Further it is adjusted as per the spatial alignment shown in MGE input dgn.</procdesc>
    <srcused>Easement</srcused>
    <procdate>20040512</procdate>
    <proctime>09000000</proctime>
    <srcprod>BAS_EASEMENT</srcprod>
    <proccont>
    <cntinfo>
    <cntperp>
    <cntper>Mahesh P Choudhury</cntper>
    <cntorg>Rolta International Inc.</cntorg>
    </cntperp>
    <cntpos>Project Manager</cntpos>
    <cntaddr>
    <addrtype>mailing address</addrtype>
    <address>5865 North Point Parkway</address>
    <city>Alpharetta</city>
    <state>GA</state>
    <postal>30022</postal>
    <country>USA</country>
    </cntaddr>
    <cntvoice>678.942.5015</cntvoice>
    <cnttdd>678.942.5015</cnttdd>
    <cntfax>678.942.5001</cntfax>
    <cntemail>[email protected]</cntemail>
    <hours>8-5</hours>
    <cntinst>None</cntinst>
    </cntinfo>
    </proccont>
    </procstep>
    </lineage>
    <cloud>Unknown</cloud>
    </dataqual>
    <spdoinfo>
    <indspref>unknown</indspref>
    <direct>Vector</direct>
    <ptvctinf>
    <sdtsterm>
    <sdtstype>String</sdtstype>
    <ptvctcnt>2203</ptvctcnt>
    </sdtsterm>
    </ptvctinf>
    </spdoinfo>
    <spref>
    <horizsys>
    <geograph>
    <latres>5.5</latres>
    <longres>5.5</longres>
    <geogunit>Decimal degrees</geogunit>
    </geograph>
    <geodetic>
    <horizdn>North American Datum of 1983</horizdn>
    <ellips>Geodetic Reference System 80</ellips>
    <semiaxis>1</semiaxis>
    <denflat>2</denflat>
    </geodetic>
    </horizsys>
    <vertdef>
    <altsys>
    <altdatum>North American Vertical Datum of 1988</altdatum>
    <altres>0.002</altres>
    <altunits>sf</altunits>
    <altenc>Attribute values</altenc>
    </altsys>
    <depthsys>
    </depthsys>
    </vertdef>
    </spref>
    <eainfo>
    <detailed>
    <enttyp>
    <enttypl>
    BAS_EASEMENT</enttypl>
    <enttypd>Contains geometry and attributes for easement segments</enttypd>
    <enttypds>Data Model Dictionary</enttypds>
    </enttyp>
    <attr>
    <attrlabl>BAS_EASEMENT_ID</attrlabl>
    <attrdef>Migrated from STREET table ID column. After all the existing IDs have been migrated, assign ID #70,001 onwards for the new easement (or what ever # is available sequentially using, street centerline #) ID's.</attrdef>
    <attrdefs>ESRI</attrdefs>
    <attrdomv>
    <udom>Sequential unique whole numbers that are automatically generated.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>SURVEY_LENGTH</attrlabl>
    <attrdef>Actual length of easement (international foot).This DOES take into account the State Plane Coordinate System.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Surveyed segment length</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>ROW_WIDTH</attrlabl>
    <attrdef>Width of right-of-way (international feet)</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Right-of-way width</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Updated from ROW files</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>FROM_EASEMENT_ID</attrlabl>
    <attrdef>Self-referential key to BAS_EASEMENT table, that contains locational information about the easement that the easement is digitized from. "FROM" is the starting point of digitization</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>IDs of an easement to which FROM side of this easement is connected.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>FROM_STREET_ID</attrlabl>
    <attrdef>Foreign key to BAS_STREET_SEGMENT table, that contains locational information about street segment that the easement is digitized from. "FROM" is the starting point of digitization</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>IDs of an street segment to which FROM side of this easement is connected.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>TO_EASEMENT_ID</attrlabl>
    <attrdef>Self-referential key to BAS_EASEMENT table, that contains locational information about the easement that the easement is digitized to. "TO" is the ending point of digitization.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>IDs of an easement to which TO side of this easement is closely located.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>TO_STREET_ID</attrlabl>
    <attrdef>Foreign key to BAS_STREET_SEGMENT table, that contains locational information about street segment that the easement is digitized to. "TO" is the ending point of digitization.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>IDs of an street segment to which TO side of this easement is closely located.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>OTH_PROCESSING_STATUS_ID</attrlabl>
    <attrdef>ID of the status/result of last run batch job.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Migrated from PLAN_1 in MGE tables and GIS_TRACKING.MDB Access Database</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>MUNICIPALITY_NAME</attrlabl>
    <attrdef>Name of municipality in which the easement primarily resides.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <codesetd>
    <codesetn>MUNICIPALITY_NAME_DOMAIN</codesetn>
    <codesets>Data Model Dictionary</codesets>
    </codesetd>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Updated using Municipal boundary source data.</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>RECORD_DRAWING_FLAG</attrlabl>
    <attrdef>Engineering plan that has been accepted by the City of San Jose (Y or N).</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>USERNAME who last modified this record</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Updated using source data.</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>ACQUISITION_DATE</attrlabl>
    <attrdef>Official date engineering plan accepted by the City of San Jose on this date</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Date/Time stamp of last record modification</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Updated using source data.</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>GEO_MOD_DATE</attrlabl>
    <attrdef>Time stamp when GEOMETRY column was last modified.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Time stamp when GEOMETRY column was last modified.</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Data modified date.</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>GDO_GEOMETRY</attrlabl>
    <attrdef>Contains spatial data with true arc geometry.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Oracle Spatial Geometry Data - True Arcs</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>MAN_OVERRIDE</attrlabl>
    <attrdef>This flag is 'N' by default. If this flag is set to 'Y' no unattended batch process will touch it ever again.</attrdef>
    <attrdefs>Data Model Dictionary</attrdefs>
    <attrdomv>
    <udom>Flag set for batch process</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>MESSAGE</attrlabl>
    <attrdef>Message from automated batch process to operator; can be "OK", or error message, or "to be checked", etc.</attrdef>
    <attrdefs>data model dictionary</attrdefs>
    <attrdomv>
    <udom>GDO_GEOMETRY.LEN</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>OTH_PLAN_CREATED</attrlabl>
    <attrdef>PLAN_1 in STREET table should be migrated to BAS_EASEMENT table OTH_PLAN_ID_CREATED column. This value should also be entered into the OTH_PLAN table PLAN_NAME column if not present.</attrdef>
    <attrdefs>Data Dictionary</attrdefs>
    <attrdomv>
    <codesetd>
    <codesetn>OTH_PLAN_DOMAIN</codesetn>
    <codesets>data model dictionary</codesets>
    </codesetd>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>OTH_PLAN_MODIFIED</attrlabl>
    <attrdef>PLAN_2 in STREET table should be migrated to BAS_EASEMENT table OTH_PLAN_ID_MODIFIED column. This value should also be entered into the OTH_PLAN table PLAN_NAME column if not present</attrdef>
    <attrdefs>Data dictionary</attrdefs>
    <attrdomv>
    <codesetd>
    <codesetn>OTH_PLAN_DOMAIN</codesetn>
    <codesets>data model dictionary</codesets>
    </codesetd>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>LINEAGE_ID</attrlabl>
    <attrdef>Artificial Numeric Identifier; Assigned to any graphical object; Unique throughout the system. Shared among tables. This column would also be used by EDL Administrator for lineage.</attrdef>
    <attrdefs>Data dictionary</attrdefs>
    <attrdomv>
    <udom>Artificial Numeric Identifier</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    <attr>
    <attrlabl>GDO_GEOMETRY.LEN</attrlabl>
    <attrdef>Created default</attrdef>
    <attrdefs>Data model</attrdefs>
    <attrdomv>
    <udom>unknown</udom>
    </attrdomv>
    <begdatea>20040512</begdatea>
    <enddatea>20040512</enddatea>
    <attrvai>
    <attrva>100</attrva>
    <attrvae>Unknown</attrvae>
    </attrvai>
    <attrmfrq>As needed</attrmfrq>
    </attr>
    </detailed>
    <overview>
    <eaover>Populated using MRF Tools</eaover>
    <eadetcit>Various sources</eadetcit>
    </overview>
    </eainfo>
    <distinfo>
    <distrib>
    <cntinfo>
    <cntperp>
    <cntper>Earl Harris</cntper>
    <cntorg>City of San Jose</cntorg>
    </cntperp>
    <cntpos>Project Manager</cntpos>
    <cntaddr>
    <addrtype>Actual Address</addrtype>
    <address>801 N 1 ST</address>
    <city>San Jose</city>
    <state>CA</state>
    <postal>90000</postal>
    <country>USA</country>
    </cntaddr>
    <cntvoice>408.277.5626</cntvoice>
    <cnttdd>408.277.5626</cnttdd>
    <cntfax>408.298.8382</cntfax>
    <cntemail>[email protected]</cntemail>
    <hours>9-5</hours>
    <cntinst>None</cntinst>
    </cntinfo>
    </distrib>
    <resdesc>Unknown</resdesc>
    <distliab>Unknown</distliab>
    <stdorder>
    <digform>
    <digtinfo>
    <formname>GM Pro Access</formname>
    <formvern>5.1</formvern>
    <formspec>GM Pro 5.1</formspec>
    <formcont>Easement data</formcont>
    <filedec>no compression applied</filedec>
    <transize>60</transize>
    </digtinfo>
    <digtopt>
    <onlinopt>
    <computer>
    <networka>
    <networkr>FTP</networkr>
    </networka>
    </computer>
    <accinstr>FTP</accinstr>
    <oncomp>FTP server</oncomp>
    </onlinopt>
    <offoptn>
    <offmedia>None</offmedia>
    <reccap>
    <recden>1</recden>
    <recdenu>None</recdenu>
    </reccap>
    <recfmt>None</recfmt>
    <compat>None</compat>
    </offoptn>
    </digtopt>
    </digform>
    <fees>Unknown</fees>
    <ordering>Unknown</ordering>
    <turnarnd>Unknown</turnarnd>
    </stdorder>
    <custom>Unknown</custom>
    <techpreq>Unknown</techpreq>
    <availabl>
    <timeinfo>
    <sngdate>
    <caldate>20040512</caldate>
    <time>09000000</time>
    </sngdate>
    </timeinfo>
    </availabl>
    </distinfo>
    <metainfo>
    <metd>20040512</metd>
    <metrd>20040512</metrd>
    <metfrd>20040519</metfrd>
    <metc>
    <cntinfo>
    <cntperp>
    <cntper>Mahesh P Choudhury</cntper>
    <cntorg>Rolta International Inc</cntorg>
    </cntperp>
    <cntpos>Project Manager</cntpos>
    <cntaddr>
    <addrtype>mailing address</addrtype>
    <address>5865 North Point Parkway</address>
    <city>Alpharetta</city>
    <state>GA</state>
    <postal>30022</postal>
    <country>USA</country>
    </cntaddr>
    <cntvoice>678.942.5015</cntvoice>
    <cnttdd>678.942.5015</cnttdd>
    <cntfax>678.942.5001</cntfax>
    <cntemail>[email protected]</cntemail>
    <hours>8-5</hours>
    <cntinst>None</cntinst>
    </cntinfo>
    </metc>
    <metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
    <metstdv>FGDC-STD-001-1998</metstdv>
    <mettc>local time</mettc>
    <metac>Unknown</metac>
    <metuc>Unknown</metuc>
    <metsi>
    <metscs>Unknown</metscs>
    <metsc>Confidential</metsc>
    <metshd>Unknown</metshd>
    </metsi>
    <metextns>
    <onlink>http://www.esri.com/metadata/esriprof80.html</onlink>
    <metprof>ESRI Metadata Profile</metprof>
    </metextns>
    </metainfo>
    </metadata>

    I am having error while registering as undefined element for citeinfo, timeinfo and cntinfo as shown below
    Please could you help me solve.
    thanks
    </xs:appinfo>
              </xs:annotation>
    </xs:element>     
    <xs:complexType name="citationType">          
    <xs:sequence>               
    *<xs:element ref="citeinfo"/>*          
    </xs:sequence>     
    </xs:complexType>
    SQL> BEGIN
    2 DBMS_XMLSCHEMA.registerSchema(
    3 SCHEMAURL => 'fgdc-std-001-1998-sect011.xsd',
    4 SCHEMADOC => bfilename('XMLDIR','fgdc-std-001-1998-sect011.xsd'),
    5 CSID => nls_charset_id('UTF8'));
    6 END;
    7 /
    BEGIN
    ERROR at line 1:
    ORA-31154: invalid XML document
    ORA-19202: Error occurred in XML processing
    LSX-00021: undefined element "citeinfo"
    ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 37
    ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 61
    ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 126
    ORA-06512: at line 2
    </xs:appinfo>          
    </xs:annotation>     
    </xs:element>     
    <xs:complexType name="timeperdType">          
    <xs:sequence>               
    *<xs:element ref="timeinfo"/>     *          
    <xs:element ref="current"/>          
    </xs:sequence>     
    </xs:complexType>     
    <xs:element name="current" type="currentType">
    </xs:appinfo>          
    </xs:annotation>     
    </xs:element>     
    <xs:complexType name="ptcontacType">          
    <xs:sequence>               
    *<xs:element ref="cntinfo"/>     *
    </xs:sequence>
         </xs:complexType>     
    <xs:element name="browse" type="browseType">          
    <xs:annotation>

  • Developing custom translator for converting xml to edi

    Hi Gurus,
    I am trying to justify using Oracle B2B if my only requirement is to be able to translate data from flat files to EDI and vice versa.
    My use case is
    Application Data ------------> ESB ---------------------------------------> Custom Translator --------------------------> EDI Document
    ........................(flat file).................(flat file converted to XML)........................ convert xml to edi
    Is this solution possible. If so, can somebody share details about how to write these custom translators.
    tia,
    Amit

    Thanks so much for your responses.
    What I have seen so far is that if <G_SN1> contains two entries of <S_N1> then the error above is generated (Could only identify segment S_N1 as dirty!).
    For instance,
    <G_SN1><S_N1><D_98>VN</D_98><D_66>1</D_66><D_67>0000010003</D_67></S_N1> <S_N1><D_98>ST</D_98><D_66>1</D_66><D_67>0000010003</D_67></S_N1></G_SN1>
    Is there a way to modify the mapping in Seeburger in such a way that it would allow/accept two occurrence of <S_N1> under <G_SN1>?

  • Special charecters handling while Converting XML string to DOM

    Hi,
    I am using the following approach for converting XML string to DOM, but due to Special characters like "&", I am getting Exceptions:
    String xmlString;
    DocumentBuilderFactory factory =
    DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
    Document document = builder.parse(new InputSource(new StringReader(xmlString)));
    Can anyone please help me out on how to handle the Special characters in the above code.

    If the XML doesn't parse, then the XML must be invalid. Show a sample of such a special character in the XML data. Please use \ tags to post the actual XML content and any other code.                                                                                                                                                                                                                                                                                                                                                                                           

  • How to ignore prefix from XML while converting XML to csv using XSLT

    Hi All,
    I am trying to convert XML to csv file.
    the XML i have is like....
    <?xml version="1.0"?>
    <bulkCmConfigDataFile xmlns:es="SpecificAttributes.3.0.xsd" xmlns:un="utranNrm.xsd" xmlns:xn="genericNrm.xsd" xmlns:gn="geranNrm.xsd" xmlns="configData.xsd">
    <configData dnPrefix="Undefined">
            <xn:SubNetwork id="AU_R">
                <xn:SubNetwork id="H5RG_0501">
                    <xn:MeContext id="Firle_5070020">
                        <xn:ManagedElement id="1">
                   <un:RncFunction id="1">
                   <un:UtranCell id="50390303">
                                    <un:attributes>
                                        <un:userLabel>UtranCell 50390303</un:userLabel>
                                        <un:cId>52383</un:cId>
                                        <un:localCellId>50390303</un:localCellId>
                                        <un:uarfcnUl>9613</un:uarfcnUl>
                                        <un:uarfcnDl>10563</un:uarfcnDl>
                                        <un:primaryScramblingCode>502</un:primaryScramblingCode>
                                        <un:primaryCpichPower>287</un:primaryCpichPower>
                                        <un:maximumTransmissionPower>403</un:maximumTransmissionPower>
                                        <un:primarySchPower>-18</un:primarySchPower>
                                        <un:secondarySchPower>-20</un:secondarySchPower>
                                        <un:bchPower>-20</un:bchPower>
                                        <un:lac>50301</un:lac>
                                        <un:rac>1</un:rac>
                                        <un:sac>52383</un:sac>
                                        <un:utranCellIubLink>SubNetwork=AU_R,SubNetwork=H5RG_0501,MeContext=H5RG_0501,ManagedElement=1,RncFunction=1,IubLink=5039030</un:utranCellIubLink>
                                    </un:attributes>
                                </un:UtranCell>     
                   </un:RncFunction>
                        </xn:ManagedElement>   
                    </xn:MeContext>
             </xn:SubNetwork>
            </xn:SubNetwork>
        </configData>
    </bulkCmConfigDataFile>now when i am using XSLT functionality to convert this XML into a csv i want ignore all the prefix from this xml like "un" , "xn" etc....
    can anybody has idea how i can ignore all this value using XSLT

    I just dont understand why factory.setIgnoringElementContentWhitespace(true) did not work.That only does something if the XML has a DTD that enables it to know what whitespace can be ignored and what is significant. The API documentation for the method refers you to this document:
    http://www.w3.org/TR/REC-xml#sec-white-space

  • Error While converting xml to sap abap string.

    Hi Experts,
    As i am doing an cross Application from SAP to .Net and vice versa.I am receiving an xml from .Net and it should be converted to ABAP string Using the following function module   SMUM_XML_PARSE 
    And the following string i am receiving from .net
    <Root><qApprovalInfo><RequesterId>xxxx</RequesterId><RequesterName>xxx</RequesterName><ApproverId>xxxx</ApproverId><ApproverLevel>1</ApproverLevel><PendingApprovalId>0200169911</PendingApprovalId><CreatedDate>20/07/2011</CreatedDate><CreatedBy>xx</CreatedBy><ModifiedDate>2011-07-20 16:45</ModifiedDate><ModifiedBy>xxxx</ModifiedBy><ApplicationCode>EPAY</ApplicationCode><WorkFlowCode>EPX</WorkFlowCode><ApprovalStatus>APPROVED</ApprovalStatus><ActionComments><![CDATA[APPROVED(through  Desktop)]]></ActionComments><Mode>CREATE</Mode><ActionSource>DESKTOP</ActionSource></qApprovalInfo><qApprovalHidden><Approverl>40002664</Approver><EmployeeId>40016515</EmployeeId></qApprovalHidden></Root>
    In this xml i am getting all the values except the <ActionComments><![CDATA[APPROVED(through Desktop)]]></ActionComments>
    is their any way to convert that CDATA value?..
    have anybody come across the following issue ?...
    can anybody provide the solution for this?.
    Edited by: basavaraj.p on Aug 29, 2011 10:54 AM

    Hi,
    SMUM_XML_PARSE is a simplified, unreleased and undocumented version of the powerful, released and documented iXML
    If you look at the GET_ELEMENT subroutine in that function module, you'll see that the nodes of type CO_NODE_CDATA_SECTION are simply ignored.
    The simpliest thing for you, maybe, is to duplicate the code of SMUM_XML_PARSE (as it is rather easy to handle), and add a section to GET_ELEMENT. You'll have also to use IF_IXML_CDATA_SECTION interface and ixml_iid_cdata_section constant.
    Documentation is here: [SAP Library: Interface if_ixml_cdata_section|http://help.sap.com/saphelp_nw70/helpdata/en/bb/576658dca511d4990b00508b6b8b11/frameset.htm ]
    Best regards,
    Sandra

  • Getting error: java.lang.NullPointerException while submitting xml report

    hi every one,
    i am getting the below error when submitting the Xml report Request
    XDO Data Engine Version No: 5.6.3
    Resp: 21635
    Org ID : 204
    Request ID: 5878206
    All Parameters: P_ORGANIZATION_ID=7907:P_DELIVERY_DATE_LOW=:P_DELIVERY_DATE_HIGH=:P_FREIGHT_CODE=:P_DELIVERY_ID=:P_TRIP_ID=:P_DELIVERY_LEG_ID=4497:P_ITEM_DISPLAY=D:P_ITEM_FLEX_CODE=MSTK:DebugFlag=N
    Data Template Code: CUST_WSH
    Data Template Application Short Name: WSH
    Debug Flag: N
    {P_DELIVERY_DATE_HIGH=, P_ORGANIZATION_ID=7907, P_TRIP_ID=, P_FREIGHT_CODE=, P_DELIVERY_DATE_LOW=, P_ITEM_FLEX_CODE=MSTK, P_ITEM_DISPLAY=D, P_DELIVERY_LEG_ID=4497, P_DELIVERY_ID=}
    Calling XDO Data Engine...
    java.lang.NullPointerException
         at oracle.apps.xdo.oa.util.DataTemplate.getDataTemplate(DataTemplate.java:379)
         at oracle.apps.xdo.oa.util.DataTemplate.<init>(DataTemplate.java:226)
         at oracle.apps.xdo.oa.cp.JCP4XDODataEngine.runProgram(JCP4XDODataEngine.java:283)
         at oracle.apps.fnd.cp.request.Run.main(Run.java:157)
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    Output file size:
    0
    Finished executing request completion options.
    please help me out
    Regards,
    pavan

    Above problem is solved.
    but now i am facing one more problem
    i intend to get output in pdf format
    but i am getting in xml format
    kindly help

  • Error: undefined; OffendingCommand: PK while converting to pdf

    Author:
    Devkia [ Fri Apr 09, 2010 03:33 PM ]
    Post subject:
    Need Help With Adobe Distiller 9
    Hello Everyone,
    My Challenge :
    =======
    I am using licensed version of Acrobat Distiller 9 for testing.
    The logic converts the Excel to ps file and then ps file to pdf.
    So on local (i.e my computer) it form .ps file and then I am able to conver it to pdf.Everything works fine.
    But now I have setup everything on the server, on the server .ps file forms but when I try to convert it to pdf it
    gives me the following error.
    %%[ Error: undefined; OffendingCommand: PK    ]%%
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    It looks like the ps files get formed but somehthing is a miss. because if I try convert it to pdf manually it gives me the erorro,
    From the code it just hangs.
    I am using a windows applpication  and have created a servic which should run everyday to print the reports
    =============
    The code sample is something like this
                                                for (int i = 0; i < strSheets.Length-1; i++)
                                                    myWorkSheet = (Worksheet)myWorkBook.Sheets.get_Item(strSheets[i]);
                                                    myWorkSheet.Select(false); //false is passed so that the first selection remains
                                                Utility.AppendLog("Selected the sheets");
                                                myWorkBook.Worksheets.Application.ActiveWindow.SelectedSheets.PrintOut(Type.Missing, Type.Missing, 1, false, "Acrobat Distiller 9", true, true, PSFileName);
                                                Utility.AppendLog("myWorkBook  Got Printed");
                                                // to print full work sheet just kept the code for now
                                                //myWorkBook.Worksheets.PrintOut(Type.Missing, Type.Missing, 1, false, "Acrobat Distiller 9", true, true, PSFileName);
                                                Utility.AppendLog("Ps File submitted Adobe PDf ");
                                                int FlagJob = objPdfDistiller.FileToPDF(PSFileName, PDFFileName, "");
                                                Utility.AppendLog("FlagJob " + FlagJob);
                                                if (FlagJob == 0)
                                                    Utility.AppendLog("Parameters are invalid For " + PSFileName);
                                                else if (FlagJob == 1)
                                                    Utility.AppendLog("Created SucessfullFor " + PSFileName);
                                                else if (FlagJob == -1)
                                                    Utility.AppendLog("the PDF creation itself failedFor " + PSFileName);
    =============

    Distiller doesn't read PPTX files. Powerpoint does.

  • IDOC_XML_FROM_FILE Error while loading XML as IDOC to ECC 6.0

    I have successfully converted IDOC to XML file.
    Getting Error while converting XML back to IDOC in ECC 6.0 using function: IDOC_XML_FROM_FILE
    Segment EDI_DS40 is not defined.....I am really not sure about the error as this idoc was previously posted to the same ECC 6.0...
    Exception       SEGMENT_ERROR
    Message ID:          EA                         Message number:           721
    Message:
    The segment EDI_DS40 is not defined.
    Secondly is there a way to load XML file via WE19?
    Tx
    Salman

    Thanks alot Oliver for taking a stab...
    I created the XML file from within SAP by using the functionailty of this function module:-
    IDOC_XML_TRANSFORM
    I created my ZIDOC_XML_TRANSFORM and just added file download facility in that the rest is the same as the orignal function.
    Is there any way for me to supress generation of ED_DS40 segements in the XML file??

  • Return code 8 while converting field in record 1 (Remote cube)

    Hello,
    I am executing a query which fetches data from a remote cube. This query gives me errors 'Return code 8 while converting <Field> in record <no.>' RSAR 1118.
    What might be the issue with the remote cube. and how should I check it.
    Tx.
    Regards,
    KP

    Hi Venkat,
    Is already has ALPHA conversion routine. We are getting this error for few more infoobjects in different transaction data loads.
    Regards
    SSS

  • I am getting error while converting the xml file to pdf

    Hi all,
    I am getting the error
    "Runtime exception when processing target-field mapping /ns0:MT_payment_rec/payment_rec/companycode; root message: Exception:[ExceptionConverter: java.io.IOException: The document has no pages.] in class com.sap.xi.tf._MM_Payment_Advice_ method calculate[a, com.sap.aii.mappingtool.tf7.rt.Context@2e0d7679]"
    I followed below  blog for converting xml to pdf
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1940
    in this blog they mentioned source & target path, but I read the values directly Through sender communication channel with out giving the source and target path in udf(calling the java code from imported archive, and excuted for converting xml to pdf file),
    but i am getting above error,
    Is there any possibility to return the converted pdf values to target field through udf
    Pls help me.

    Hi
    Can u tell us what is the function of the UDF in your case ?
    Apart from Converting the given input xml to pdf output, I dont see there is any other functionality within the UDF .. and  the XMLTOPDF Class requires the two inputs to be passed when it is instantiated in the code
    and now if you don't pass those parameters, it's going to throw an IO exception
    Regards
    Krishna

  • Error while converting class file to exp and jca file

    error while converting *.class file to *.exp and *.jca file
    =====================================================================================================================
    linux-y60u:/home/admin/java_card_kit-2_2_1/samples/src # converter -exportpath "/home/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/HelloWorld 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
    Java Card 2.2.1 Class File Converter, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
    parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/HelloWorld.class
    parsing /home/admin/java_card_kit-2_2_1/samples/src/com/sun/javacard/samples/HelloWorld/Identity.class
    error: com.sun.javacard.samples.HelloWorld.HelloWorld: unsupported class file format of version 50.0.
    error: com.sun.javacard.samples.HelloWorld.Identity: unsupported class file format of version 50.0.
    conversion completed with 2 errors and 0 warnings.
    =====================================================================================================================

    i compile a file javacard use this command:
    ===
    javac -source 1.3 -target 1.1 -g -classpath ./classes:../lib/api.jar:../lib/installer.jar src/com/sun/javacard/samples/Identity/Identity.java
    ===
    and try to convert this class use this command
    ===
    /home/xnuxerx/admin/java_card_kit-2_2_1/bin/converter -exportpath "/home/xnuxerx/admin/java_card_kit-2_2_1/lib/" com/sun/javacard/samples/Identity 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b 1.0 -v -applet 0x00:0x01:0x02:0x03:0x04:0x05:0x06:0x07:0x0b:0x01 Identity
    ===
    result convert:
    ===
    Java Card 2.2.1 Class File Converter, Version 1.3
    Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
    parsing /home/xnuxerx/admin/java_card_kit-2_2_1/samples/classes/com/sun/javacard/samples/Identity/Identity.class
    converting com.sun.javacard.samples.Identity.Identity
    error: export file framework.exp of package javacard.framework not found.
    conversion completed with 1 errors and 0 warnings.
    ===
    why ??
    please your comment for this problem.
    thank 4 all.

  • Heap space error while creating XML document from Resultset

    I am getting Heap space error while creating XML document from Resultset.
    It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
    I am already using -Xms32m -Xmx1024m
    Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
    here is my code:
    stmt = conn.prepareStatement(sql);
    result = stmt.executeQuery();
    result.setFetchSize(999);
    Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
    JDBCUtil.write(doc, fileName);
    public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
        throws ParserConfigurationException, SQLException {
            DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
            DocumentBuilder builder = factory.newDocumentBuilder();
            Document doc = builder.newDocument();
            Element results = doc.createElement("sims");
            results.setAttribute("bank", bankId);
            results.setAttribute("record_type", "HEADER");
            results.setAttribute("file_type", interfaceFileType);
            results.setAttribute("version", version);
            doc.appendChild(results);
            ResultSetMetaData rsmd = rs.getMetaData();
            int colCount = rsmd.getColumnCount();
            String columnName="";
            Object value;
            while (rs.next()) {
                Element row = doc.createElement("rec");
                results.appendChild(row);
                for (int i = 1; i <= colCount; i++) {
                    columnName = rsmd.getColumnLabel(i);
                    value = rs.getObject(i);
                    Element node = doc.createElement(columnName);
                    if(value != null)
                        node.appendChild(doc.createTextNode(value.toString()));
                    else
                        node.appendChild(doc.createTextNode(""));
                    row.appendChild(node);
            return doc;
    public static void write(Document document, String filename) {
            //long start = System.currentTimeMillis();
            // lets write to a file
            OutputFormat format = new OutputFormat(document); // Serialize DOM
            format.setIndent(2);
            format.setLineSeparator(System.getProperty("line.separator"));
            format.setLineWidth(80);
            try {
                FileWriter writer = new FileWriter(filename);
                BufferedWriter buf = new BufferedWriter(writer);
                XMLSerializer FileSerial = new XMLSerializer(writer, format);
                FileSerial.asDOMSerializer(); // As a DOM Serializer
                FileSerial.serialize(document);
                writer.close();
            } catch (IOException ioe) {
                ioe.printStackTrace();
            //long end = System.currentTimeMillis();
            //System.err.println("W3C File write time :" + (end - start) + "  " + filename);
        }

    you can increase your heap size..... try setting this as your environment variable.....
    variable: JAVA_OPTS
    value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m

  • Error while building xml document

    Hi Everyone,
    I have a problem while building xml document.
    I have developed my java files using IBM Eclipse 3.0 and i had no problem while executing the files.
    But while i am trying to execute the same code in jdk/bin, xml document is not working..
    No error encountered while compiling but while executing when i try to print the xml string it just gives the root element name like [root : null]
    Can anyone suggest some solution?

    To the values element add xmlns:xsi and xsi:noNamespaceSchemaLocation.
    <values xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance";
    xsi:noNamespaceSchemaLocation="file:///c:/schema.xsd">schema.xsd is schema file.

  • Error while using XML Iview, please contact your system administrator.

    Hello everybody,
    I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
        Area           Version
        J2EE Engine    6.40 PatchLevel 98256.313
        Portal         6.0.14.0.0
    , can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
    Thanks in advance,
    Regards,
    Sarabjeet.

    Hi Sarabjeet,
    The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
    And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
    The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
    I will check if I can find out any more specific info.
    Daniel

Maybe you are looking for

  • 2.1 & Exchange Setup

    Greetings, Everything was working fine before I upgraded. Things seem to be okay afterwards, but the unit was heating up and the batter was draining very quickly. I figured there was some run-away process so I restored my phone without the backup opt

  • Relation between Accounting Document between Asset Document

    Dear Experts, We are developing a report and need some help. In which table can we find both the Asset document and its corresponding Accounting document?? Thank you regards KAP

  • Database Structure window MISSING RESOURCE

    Hi, I am trying to debug a PL/SQL package, but get the message Errors -><MISSING RESOURCE> in the structure window Selecting the error brings me to the following line: SELECT distinct asg.ref_group_id FROM agent_super_groups asg WHERE asg.agent_super

  • I download video on firefox but it is not showing up in any folder

    i downloaded video of 623mb on firefox download manager but it is not showing up in any folder

  • Will I lose my quicktime pro if i update QT player??

    I have an EyeTV (el Gato, the coolest tv system) on my old G4 and just a minute ago, I updated it. Found out there's a wi-fi capability that can upload my recorded tv shows to my iphone (via the internet). So I enabled it but it prompted me to upgrad