Error in setting release key for a change number

When i am giving release key in CC02 01(Global Release) system is giving me message It can not be released for production
when i analysed i found the following details
ECO PP0000000029 cannot be released for production
Message no. CC251
Diagnosis
You want to set a release key for an ECO and it has been defined as globally released.
System Response
The system checks the system status of the ECO. You can only set the release key if the ECO released system status is set for the ECO.
Procedure
Check the system status of the ECO (in the change header).
If required, set the system status to ECO released.
If you cannot yet set this system status for the ECO, you first have to process the system status of the allocated change objects.
What is the reason for that.What i need to resolve that with exact steps.

Hello Cha,
Kindly open this custom table using SM30 and try creating a transport request from there.
Regards
Vivek

Similar Messages

Error occurred during WM processing for posting change delivery

Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
    The indicator AUFER from the delivery type contradicts the
    storage location constellation that was determined by the
    WM system.
    TVLK-AUFER = '<VAR2>'
    WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...Gopi

Hi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir

Error while setting up enviroment for the application

Hi,
Im getting a popup box displaying the error message
C:\WINDOWS\system32\ntvdm.exe
Error while setting up enviroment for the application. Choose 'Close' to terminate the application.
When I try to excute an external exe, why am I getting this error? and is there a way of getting this exe to execute properly without the error?
Here my code for excuting the external exe
String[] cmd = {"C:/gen.exe", "C:/a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor(); "gen.exe" is the program i wish to execute and "a.zip" is the parameter i wish to excute it with.

class ExecRuntime {
public static void main(String args[]) throws Exception {
String[] cmd = {"C:\\gen.exe", "C:\\a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor();
} Here we need to use backslashes, because the command is passed to the OS as is.
If you need to be in C:\ to execute from command line, you will also need to use the
exec() version that allows you to specify the 'current directory'
Edited by: baftos on Mar 7, 2008 12:13 PM

How to set Shortcut keys for button in Apex

Hi
Could anyone help me on how to set shortcut keys for buttons in Apex.
I need to use say ALT + S to submit the page.
The following thread pertaining to HTML DB refered to use ACCESS key. but that couldnt work in my case.
Re: operation of the app. with the keyboard
Any pointers on achieving this would be helpful.
Thanks
Vijay

Hi Vijay,
I’m afraid you must do it using javascript key listener. You can’t use action() on template based buttons because they are actually not HTML buttons but images with hyperlink.
Key listener checks which key has been pressed down and invoke some JS function. For example, write this code in page header:
<script>
document.onkeydown=keyCheck;
function keyCheck(e){
     var KeyId = (window.event) ? event.keyCode : e.keyCode;
     switch(KeyId){
          case 113:
               doSubmit('SAVE');
               break;
          case 118:
               alert('Hello');
               break;
</script>
This script will submit page with request 'SAVE' if you press F2 or will show alert message if you press F7. Modify it to your issue.
Regards,
Przemek

How to set primary key for a date column

hello experts .,
i need to set primary key for a column consists of the datatype date. how to solve this..?

1008318 wrote:
its my personal need..then it is a very bad personal need. DATE is not an appropriate type to be using for a primary key, as it cannot be guaranteed to be unique, especially when inserting multiple rows at once.
You would be better working to business needs and implementing correct technical solutions to those needs, than to just do things based on your personal needs.

Release key for TCNC codec software

Hello!
My question is very simple )
As far as I know, Release keys for TC and TCNC Cisco codec software are different. It's not possible to activate, e.q. TC software with "TCNC" Release key and vice versa. My codec uses TCNC software, but it's not up to date. If I want to upgrade it to the latest software release - how can I get correct Release key?
I don't see any possibility to choose something like TCNC5.1.1 in the list of available releases in online tool (Tandberg Software -> Get new Release Key), all releases in the list are something like TCX.

Short comment. The TCNC software is not about "I do not need encryption", it is about, the country you are in if you are allowed to use encryption software, or better if Cisco is allowed to export software using encryption there.
So as long as you or your system is not under these requirements simply use the TC software and if you do not need encryption simply do not use or disable it.

Error -ORA-01483: invalid length for DATE or NUMBER bind variable

In discoverer plus, attempt to save a discoverer workbook into the database fails with the error:
ORA-01483 invalid length for DATE or NUMBER bind variable
The same workbook can be safely saved in "My Computer".
Any idea why and what is the solution.

Why: not quite sure, probably the code is validating the workbook when it saves it to the db and you've got an error in the sql. What happens when you run the workbook that you saved to the file system? Does it show the same error when run?
Solution: Can you post the sql in the workbook? In the meantime try the following: Replace any to_char statements around dates with to_date statements instead. For example:
Replace:
where to_char(mydate, 'dd-mon-yyyy') = '05-apr-2009'
With:
where mydate = to_date('05-APR-2009','DD-MON-YYYY')

Can't set WEP key for broadcom-wl?

I did a fresh install of Arch this morning at my office. I have an Acer Aspire laptop with a Broadcom wireless card that works with broadcom-wl (I've used the driver for a long time and it works perfectly... with open or WPA networks). The network at my office is WEP. So after installing the drive, adding lib80211 and wl to my MODPROBE (and !b43 !ssb), I reboot and see my wireless as eth0.
If I try to iwconfig eth0 key XXXX-XXXX-XX or iwconfig eth0 essid WIFINAME key XXXX-XXXX-XX, no matter what combination I try, I get an error saying that it's an invalid argument for SET_ENCODE. I've check the Wiki and man pages for iwconfig, and can't seem to find any solution. Does anyone know why I can't put in a WEP key?
((Side note: everytime I've installed Arch, my wifi starts out as eth0 until I get connected and run pacman -Syu. Then I reboot and it shows up as wlan0, and my Atheros ethernet is eth0 or eth1.))

Thanks for a response. So this is a fresh-from-the-oven install. I usually get my wifi connection set up and then create my user and go about setting everything else up. Meaning I've been trying as root.
I can see the wireless network with iwlist scan and it shows up as encryption key: on. Also, I tried using each lib80211 mod or some combination thereof in my rc.conf. No dice.
Lastly, since I didn't include it before, here's the exact error I get when I try to assign a WEP key with iwconfig:
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth0; Invalid argument.
UPDATE: I can set the key using [x] between key and XXXXXXXXXX. However, any combination I'm trying of essid and key/enc isn't showing up in iwconfig. No errors, but my iwconfig information isn't changing. It's progress... I think.
UPDATE #2: I can iwconfig eth0 essid linksys (the office next to us) and grab that one (I don't know their password ) and it updates iwconfig, but our own network doesn't update iwconfig when I run iwconfig essid. >.<
Last edited by mtcupps (2011-06-17 18:20:02)

Error in VF02 (Posting keys for account determination for transaction JTS)

Hi,
I have created new account key JTS and also assigned G/L account in VKOA, But at the time of releasing the billing document to accounting, I am getting the below error;
Posting keys for account determination for transaction JTS do not exist
Message no. F5598

Hi Amanulla,
once we create the Account key in revenue determination we have to assign that account key to respective procedure and condition types.
check that.
please award points.
ravikanth

Reset Release Strategy for any change in the Purchase Order

Hi,
Is it possible in SAP standards to reset release strategy for even minor changes in the Purchase Order irrespective of whether it is value change or any change in the text or Purchasing group change or whatever it is?
If so, where do we need to make the configurations.
I have seen in some thread about resetting the release strategy for decrease in Purchase Order value.Even that was possible through some BAPI.
Thanks in Advance.
S.Raghavan

hi sandesh,
sorry, i know it's too late.
i tried your suggestion, it works blocking the purchase order after release strategies are setted.
sandesh, raghavan:
i need to reset the strategies after to make any change in the po. i'll appreciate your help if you can give it.
regards
f

Error : cannot set up certs for trusted CAs, help !

Hi !
I am attempting to use the javax.crypto classes in order to decrypt and encrypt
information.
But i get the follow message when i change the executing directory :
-> cannot set up certs for trusted CAs
If i decompress all follow jar files:
jce1_2_1.jar;
sunjce_provider.jar;
local_policy.jar;
US_export_policy.jar;
my applicattion doesn't work. ...
But if i use jar files, everything is ok and only in a "unique" directories ....
Why ?
[email protected]

Hi Sri,
I am working on a similar problem. In fact, while I write a simple stand-alone program, everything works fine for me.
As soon as I embed the very same class into my application, I also get the error you see. The major difference I see between my application and the stand-alone program is the class loading, which my application does via its specialized class loaders. However, I failed to catch the encryption code in my class loader between the call to
SecretKeyFactory.getInstance("PBEWithMD5AndDES").generateSecret(k);
and the error.
You have any idea how to track the issue down?
Regards,
Jack

Setting up workflow for bom change LO-ECH

Hi all,
I am trying to set up the workflow for BOM change. I have followed the Preparation step for the setup and was stuck at the step 'Define the Organizational Plan for the Change Department (LO-ECH)', step number 6.
<a href="http://">http://help.sap.com/saphelp_46c/helpdata/en/f1/499a34272a5f2ee10000009b38f83b/frameset.htm</a>
5. Select the object type SAP Organizational Object, and click .
The Add SAP Organizational Object screen appears.
6. In the field SAP org. object type, enter one of the following organizational object types:
TCC11
Responsible for changes of this change type (master record)
TCC13
Responsible for object changes of this change type
When I click on either TCC11 or TCC13, it give me the below error message
"Method CREATE not defined for object type Person responsible for changes of this type.
Message no. 5W003"
I have debugged the program and seems like it error out because there is no entries for 'CREATE' in the table SWOTDV for objecttype = 'TCC13' or 'TCC11'
May I know what am I missing here?
Regards
Khong Kiam

But I find if I have as original media - one jpeg still, one 480 x 720 video clip
480x720? Do you mean 720x420? And what CODEC? DV? Some odd whackball one like MPEG-4? Look at COMPRESSOR in the BROWSER in FCP.
Stills you have to render...
and are employing opacity, a filter like Blink,some color correction, etc. That I get minutes to render a 30 second clip.
That is still adding a filter, and opacity..and color correction. That will require rendering.
If you find that you drop a clip onto the timeline, and you instantly need to render, then something is wrong with your settings. You shouldn't have to render clips in the timeline. Not if they are captured or imported PROPERLY, meaning that they are codecs that FCP edits with.
If you want to just grab random clips or use random codecs and throw them all into an application and begin editing, then you should look at another editing application, like Vegas or Adobe Premiere CS5.
Shane

ABAP Access Key for Table change mode MCVKUSR & MCVBAPUSR in SE11

Dear All,
I'm using SAP ECC6.0. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
1. I run the SE11 transaction
2. At the first entry I write the name of the table to be Change created ( Display mode Showing )
3. I click on the change button.
4. It will ask for Access Key
But then the system asks me an Access Key , where can I get this?
I have SAP License Key.
DB Table Name : MCVBAPUSR & MCVKUSR
Please Let me know
Thanks in advance,

Dear ,
I go to Service market Place site, from SSCR Tab then I have to select a object from the list is TABL.
and enter the Particular Object & Table Name . Now I got it Access key for Particular Object.
Thank you for your quick Response.
Once again Thank u.
Regards
Thomas.T
Edited by: thomas_raja on Jun 5, 2011 6:24 AM

About the Error after applying product key for bing search rest service

For the Project Siena I ve created the product key for Bing search rest service and i applied that product key which is valid even though i got the error when i click TRY button .can anyone please help me to find the solution
There was an error in retrieving sample data. Error : Unable to reach service. Please check if your service connector configuration is valid and you have network connectivity

Hello,
Thanks for your post. I am jotting down few steps to get the Bing search account key (you may have completed many/all of these).
To add Bing Search Service, go to
https://datamarket.azure.com/account/datasets and search for "Bing Search API". After you have subscribed to the service, navigate to "My Data" and click on Use. Click on Show and copy the
Primary Account Key information.
Note if your key contains a special character like / or = then double clicking on the content will copy the key partially.
Make sure you have copied the full key correctly. If the is incorrectly pasted in Siena's Primary Account Key field, you will get the error below:
This is similar to the error you have posted. Since the Primary Account Key is masked you can never be sure the contents are correct. It's best to clear the field and paste the key again.
If you still face the issue, please post your machine configuration (x86/OS) information.
Hope this helps,
-Karthik
This posting is provided "AS IS" with no warranties and confers no rights.

How do i set Shortcut key for activating some operation for JButton

while using the JButton component,one question is arising in my mind that is
(1)how to set Shortcut key instead of using JButton actionPerformed event.
I need a shortcut key for the similar operation has to be performed

http://java.sun.com/docs/books/tutorial/uiswing/components/button.html

Error in setting release key for a change number

Similar Messages

Maybe you are looking for