Error in setting up page format for Script.

Hi,
I have set up a customized page format.
I set up Page format, Format types and Device types.
I have throughly checked wit the other working formats, everthing seems right..
Page format : zmed_po - Portait
Format type : zmed_po
Error - No Printer font maintained for ZMED_PO.
Please help me out.
Cheers,
Sam

HI Sam,
For this u need to setup the printer at OS level. There u need to setup the fonts and etc.. related to the printer. I hope this is eror from OS level...
regards
reghu

Similar Messages

Page Format for landscape/legal paper for ALV Grid report

Hi!
I have a request to set up a particular ALV Grid report as a background job with the report output printing on legal-size paper with landscape orientation. We currently don't have any reports set up to print on legal size paper. What do I need to do to set this up? We currently use X_58_170 or X_65_255 which print on letter-size paper. I cannot seem to find a page format for landscape legal other than LEGAL which seems to be available only for SAPscript or Smart Forms. Any help will be greatly appreciated.
Best Regards,
Nik von Ruden
Edited by: Nik Von Ruden on Oct 8, 2010 1:11 AM

Hi,
Thanks for you reply.
I cannot control left and right margin in PDF. Also, it is a PDF file so eventhough somehow you are able to change left and right margin, the content does not adjust itself to fit the legal page (as it does in word or excel).
Let me know if there is any other option.
Thanks,
RS

How to set a page template for news detailed view?

Is there a way to set a page template for the detailed view of the news module?
I have a page template setup and added the {module_announcement,,,,,} to the page. When the news item is clicked it always opens the default template - is this how it is designed to work or is there a way I can specify it to use a different page template?
Dave.

Hey Dave, See the image below:

Multiple page format for single smartforms

We have a requirement to get the output in different page formates for a smartform.
How to achieve this???

suppose you r using a program to print the smartform.
Just check this program.
REPORT z_sf_demo1 .
PARAMETERS p_bukrs LIKE ekko-bukrs.
DATA: fm_name TYPE tdsfname.
DATA: ssfctrlop LIKE ssfctrlop.
Function to get the function name to run SMART FORM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZJAYRA_DETAIL'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To pass parameters for CONTROL_PARAMETERS
ssfctrlop-no_open = ' '.
ssfctrlop-no_close = 'X'.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = ssfctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
bukrs = p_bukrs
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To pass parameters for CONTROL_PARAMETERS
ssfctrlop-no_open = 'X'.
ssfctrlop-no_close = ''.
ssfctrlop-startpage = 'PAGE2'.
Function to run SMART FORM from third page to last page.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = ssfctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
bukrs = p_bukrs
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ssfctrlop-no_open = 'X'.
ssfctrlop-no_close = ''.
ssfctrlop-startpage = 'PAGE3'.
Function to run SMART FORM from third page to last page.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = ssfctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
bukrs = p_bukrs
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I have also sent a mail to your gmail id regarding the details of my program.
Hope your query will be solved.
<b>Rewards pioint for helpful answers.</b>
Regards,
Abhay.

Setting the page orientation for a report

Hi
Currently, in infoview I have observed that we can set the page orientation for a report in a webi document , i.e. whether the report is to be viewed in landscape mode or portrait mode.
Currently, in the BO SDK, I have come across the classes like Orientation, but am not able to figure out how to use them.
Can you please paste some code snippet, how to use this class for setting the orientation of the document.
Thanks in advance,
Shruti

Hi Shruti,
To retrieve the Reportcontainer for an existing report on a WebI document, you can do the following:
ReportStructure oReportStructure = oDocumentInstance.getStructure();
ReportContainer oReportContainer = (ReportContainer) oReportStructure.getReportElement(0);
Hope this helps.
Regards,
Dan

Can I set the address format for individual contacts?

I have some foreign friends and would like to set the address format for their individual cards correctly. I can't seem to find a way to do this. I will be taken aback if this can't be done - I think the old Claris contact product did that.
Anyone with any answer?
Bryan

Hi Bryan,
When in edit mode, can you right click on the address field and change the country format there? I'm not on a Mac at the moment to double check, but that's what you do in OS 10.4 so I'd be surprised if it were changed in 10.5.
Edit: Here's picture to demonstrate what I'm referring to:
!http://www.ampersandbox.com/imprint/change-address-format.jpg!

What is this error java.sql.SQLException: Bad format for number ?

Dear All,
I am reading few values from database. Then I get this error "MyError:Error : java.sql.SQLException: Bad format for number 'Sarawak' in column 6. " So what is this error referring to. I have checked the database column and its value fits according the data type. Any hints please?

I have checked the database column and its value fits according the data type.Check again. Then check again. Keep checking until you find your error. You are trying to read a string containing "Sarawak" as a number. You have "getInt(6)" or other numeric type, and the 6th column in the select statement is not numeric.

How to add "Done" button on Number pad? And how to set 00.00 format for UITextField?

1.) I am new to iPhone development. I have a small application & for that I need to add number pad but there is no "Done" button. I know we can get rid of that keyboard by clinking UIView but I want a separate button for this.
2.) My second question is how to set 00.00 format for UITextField as there is no decimal point available on number pad?

As to #1, you should study the iOS HIG - doing what you have in mind might be a good way to risk rejection and not have your app make it into the store.
#2:
On devices running iOS v4.1 and greater you can use the following:
myTextField.keyboardType = UIKeyboardTypeDecimalPad;
It is tricky (and perhaps not worth the trouble) if you are trying to support older iOS versions. Here is a link to the most popular solution.

Set default page format

Hi everyone,
is there an easy way to set the page format from "Letter" to "A4"? The user can do this in the Page setup dialog, so there should ba an easy way to do it programmatically (without messing with attributes etc.) ???
TIA,
-Thomas

Did you try this?
// Get a PrinterJob
PrinterJob printJob = PrinterJob.getPrinterJob();
// Create a landscape page format
pageFormat = printJob.defaultPage();
pageFormat.setOrientation( PageFormat.LANDSCAPE ); //Only if requestedThoto

Page format for SAP-Script not working in 4.6C

Hi all,
I have a problem regarding check printing.
I am using SAP version 4.6C
The size of paper for check printing is
width = 231 mm
Height = 304 mm
So for this I have created a new page format with these details in SPAD.
Then I assigned this Page format to spool format and assigned that spool format to SAPWIN driver. I have assigned this page format to the SCRIPT that is used for check printing .
But when I am taking the print out for the check with new page format, the printer dont print till the end of page, it prints till the total amount on check and then stops there. So this creates an alignment problem when taking printout for multiple checks.
Please give some solution for this.
Regards,
Bharat.

I guess you are printing on dot matrix printer. If yes, try to do some physical printer settings for the dot matrix printer by following the printer manual. I guess you have to change the page size.. or set default printer settings... it may help you to solve your problem...
if not goto your device types tab in SPAD and select device types.. select your device from the list (for ex, SAPWIN) click format and goto the format that you have inserted for this device types.. double click on your format, you will see printer Indialization.. try to write code like this
set page length to 8.5 inch (=52 lines at 6 LPI)
\e\0x43\0x44
Note the above hexa decimal value can be obtained by going through the printer manual.
Close the thread once your question is answered.
Regards,
SaiRam

Error when saving a default format for a date field in 11g

Getting this error when attempting to save the default for a date field in 11g:
The current xml is invalid with the following errors: Bad xml instance! <?xml version="1.0"?> <sawsavedformat:metadata xmlns:sawsavedformat="com.siebel.analytics.web/savedformat/v1.1"><sawsavedformat:columnSavedFormats><sawsavedformat:columnSavedFormat xmlns:saw="com.siebel.analytics.web/report/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="sawsavedformat:regularColumnSavedFormat" columnName=""Retrospectives"."Time Dim"."Two Months Ago""><saw:displayFormat><saw:formatSpec suppress="suppress" wrapText="true" visibility="visible" hAlign="left" vAlign="top"><saw:dataFormat xsi:type="saw:custom" customFormat="MMMM dd, yyyy" displayTimeZone=""/></saw:formatSpec></saw:displayFormat><saw:tableHeading><saw:displayFormat><saw:formatSpec/></saw:displayFormat></saw:tableHeading><saw:columnHeading><saw:displayFormat><saw:formatSpec/></saw:displayFormat></saw:columnHeading></sawsavedformat:columnSavedFormat></sawsavedformat:columnSavedFormats></sawsavedformat:metadata>
Line:2, Col:608, Attribute 'displayTimeZone' is not declared for element 'dataFormat'
Thoughts and suggestions?

I have a Support Request open with Oracle right now (it's taking a few weeks to resolve) but here's the update:
OBIEE 10g handles DATE types differently than 11g. Both the support rep and I can't figure out how, but they are different. If you bring the column in as a DATETIME in your Physical Layer you can't save it system-wide, even if you do set a time zone for your account (My Account -> Preferences -> Time Zone). If you bring the column in as DATE you can save it system-wide but you can't display the hours/mins/secs, only the M/D/Y. This has been tested on a 9i and 10g database and produced the same thing on both. The problem never occurred with those same columns using OBIEE 10g.
Oracle support has not fully admitted this as a bug, but the rep working on this SR said this will probably be fixed in the next release- 11.1.1.4, which is due out late Jan/early Feb of this year. He is trying to reproduce this so he can log it as a bug (which we all are hoping for!) so Oracle can address it.
For now, I've found that you are stuck with two options: 1) bring the column in as a DATE, display it system-wide as a saved format, but you can't show the time, and 2) don't save that date value with a system-wide formatting and set it manually on every report you need a custom format (don't forget to set your time zone).
If I hear anything more back from Oracle support I'll update this thread.
Sorry guys, looks like we're all stranded on this one...

Page formats in script its Urgent

Hello all,
I have created one page format through SPAD.. but its getting error :You have selected a page format YPO_PF for which there is no identical formatting type in the spool.
and i saved with same request no but while i was moving it to testing through scc1 i am getting error
please guide me to create page format....?
thanks
regards
aeda
Edited by: Aeda N on Mar 10, 2008 12:21 PM

Hi,
Although I have never done this before, but I hope the below link from SAP help site may help you.
http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a959551ea11d189570000e829fbbd/content.htm
Regards,
Mayank

New Discussion pages formatted for iPhone - pls!!

Anyone else agree that Apple need to get an iPhone verion of these discussion pages? Typing is horrible. Too much lag when typing. Come on Apple! Even your own website is not formatted for an iPhone.

Well the script here constantly saves what you type so the "lag" is when it is saving while typing. Happens in BeeJive or Meebo as well because processing is gonig on while typing.
Apple isn't going to make an iPhone only version because that would go against the fact they released a phone with a real browser to hit real sites instead of mobile ones. Now yes it spawned many sites to make mobile sites (and even geared to the iPhone) but if Apple were to do it, it will say to the world, look we made a real webbrowser on a phone, but we had to change our site to let it work better. Not good PR.

Set custom page size for printing

I want to set a custom page size for printing some PDF three and four-page musical scores to roll paper on an Epson 1290 using Adobe Reader 9.3.4 on Ubuntu 10.04. The printer properties in the print dialog has a media size option, and one of the choices is "custom", but having chosen "custom", the dialog does not allow me to add the actual page size to the lpr printer command. I can see that when I choose "custom", the lpr command is
lpr -P Stylus-Photo-1290 -o PageSize=Custom etc
but what I need for a three page output, for example, is
lpr -P Stylus-Photo-1290 -o PageSize=Custom.297x630mm etc
and I can't see how to add the actual custom paper size. If I Ok the media size choice dialog with it just set to PageSize=Custom, I can see from the output preview in the print dialog that the actual page size that has been chosen is letter. The online Adobe doc for Reader 9 printing (http://help.adobe.com/en_US/Reader/9.0/content.html#heading2.3) says "For documents that are larger than the standard page size, go to File > Page Setup. Create a custom page size before you print your document". The problem with that is that there is no "Page Setup" option on the File menu in the Unix version of Adobe Reader, only a "Print" option, which is where I already am.
If I open the PDFs in Evince, it allows me to add the custom page sizes I want, but as Evince doesn't have the option to print multiple pages per sheet I can't use it either...

Yes, it used to work, and the resize zoom bar used to work too (now its grayed out). I don't know if this is a "who's to blame for it" thing, but its not getting fixed and its pretty bad that no one seems to care enough even to respond. I found my own solution by opening it in Gimp. Just right click and select open with other ...Gimp and it will import into it. In the Gimp Print dialog, you have a scaling percentage in the "Page Setup" tab, and size settings in the "Image settings" plus loads of other stuff including multiple copies.

Page format for 132 column dimension in smartforms

hi guys
*In smartforms what is the pageformat for 132 column paper i.e 360 * 310 mm is there any standard pageformat provided by sap or have to create a new one ,,,how to create a new pageformat.*
Edited by: ahamed13 on Jun 6, 2010 8:44 PM

Ahmed,
create the new page format in SPAD tcode. Go to the device where u want to create the page format as per the requriement.
Regards..

Error in setting up page format for Script.

Similar Messages

Maybe you are looking for