Set custom page size for printing

I want to set a custom page size for printing some PDF three and four-page musical scores to roll paper on an Epson 1290 using Adobe Reader 9.3.4 on Ubuntu 10.04. The printer properties in the print dialog has a media size option, and one of the choices is "custom", but having chosen "custom", the dialog does not allow me to add the actual page size to the lpr printer command. I can see that when I choose "custom", the lpr command is
lpr -P Stylus-Photo-1290 -o PageSize=Custom etc
but what I need for a three page output, for example, is
lpr -P Stylus-Photo-1290 -o PageSize=Custom.297x630mm etc
and I can't see how to add the actual custom paper size. If I Ok the media size choice dialog with it just set to PageSize=Custom, I can see from the output preview in the print dialog that the actual page size that has been chosen is letter. The online Adobe doc for Reader 9 printing (http://help.adobe.com/en_US/Reader/9.0/content.html#heading2.3) says "For documents that are larger than the standard page size, go to File > Page Setup. Create a custom page size before you print your document". The problem with that is that there is no "Page Setup" option on the File menu in the Unix version of Adobe Reader, only a "Print" option, which is where I already am.
If I open the PDFs in Evince, it allows me to add the custom page sizes I want, but as Evince doesn't have the option to print multiple pages per sheet I can't use it either...

Yes, it used to work, and the resize zoom bar used to work too (now its grayed out). I don't know if this is a "who's to blame for it" thing, but its not getting fixed and its pretty bad that no one seems to care enough even to respond. I found my own solution by opening it in Gimp. Just right click and select open with other ...Gimp and it will import into it. In the Gimp Print dialog, you have a scaling percentage in the "Page Setup" tab, and size settings in the "Image settings" plus loads of other stuff including multiple copies.

Similar Messages

Can no longer create custom page size for printing to PDF?

When printing from FrameMaker to PDF in Windows, I used to be able to create a custom page size by clicking on the Add button that appeared to the right of the Adobe PDF Page Size window, in the Adobe PDF Document Properties dialog box. With Frame 9, that button no longer appears; in fact, the whole dialog box is cut off just inside the edge of the entry windows. Do I need to set something? Thanks for any help you can offer. - Cindy Shaler

Cindy,
I am not sure to what dialog boxes you are referring.
In the PDF Setup dialog box (in FrameMaker's Print dialog or Save as PDF dialog), the Settings tab displays two fields to change the width and height of the paper. I tried entering odd values, and the resulting PDF had the entered size. I see no Add button nor is the dialog box cut off.
Maybe I am not looking at the correct boxes.
Van

PIXMA MG8220 default page size for printing is set incorrectly to 6x4, need Letter

I have a PIXMA MG8220, and the default page size for printing is set incorrectly to 6x4, I need it to be Letter paper size. I'm wasting a lot of paper, and cannot figure how to reset the defaults on the printer vs. individual laptops using the printer?Simon

Hi simonp, To set the paper size to be printed on, please follow these steps: 1. Open an application such as TextEdit. 2. Go up to File and select Print, or press the CMD+P keys on your keyboard. 3. Locate the PAPER SIZE field, then select the LETTER paper size. 4. Look for the drop-down menu labeled PRESETS, then expand this menu and choose SAVE AS.
5. Type in a name of your choice for this default setting, then click OK.
You will now be able to select the above created preset from any application you print from, with the default paper size being Letter. Hope this helps!

Need Help Programmatically setting Page Size for printing to Adobe PDF

We are upgrading from Adobe 5 to Adobe 9. In Adobe 5, we set a few parameters in the __pdf.ini file to create a document with a specific Page Size. For Example:
[Acrobat PDFWriter]
PDFFileName=
bDocInfo=0
Orient=1
bExecViewer=0
cpmarginwhole=18
cpwidepart=0
cpwidewhole=612
cpheightpart=0
cpheightwhole=792
Paper=0
Since upgrading to Adobe 9.2, this no longer appears to work. I have also tried adding these values to the following Registry Locations with no luck:
HKCU\Software\Adobe\Acrobat PDFWrite
and
HKCU\Software\Adobe\Acrobat Distiller\PrinterJobControl
Is it still possible to create a custom page size using this method? Or am I going to have to do that in a different way?

Bill, thanks for the quick response. However, we generate many forms on a daily basis with different page size requirements. The way this was accomplished through Adobe PDFWriter was by setting the various parameters in the __pdf.ini file for the Document that we are generating. I believe we have about 7 different page sizes that we generate.

Safari won't use custom page margins for printing

I'm using Safari 4.04 on Snow Leopard. Here's the problem in a nutshell: I'd like to print pages that I can put in a three-hole-punch binder, without the holes going through printed content. In other words, I simply want to set a custom left margin for printing. Should be simple, right? Apparently, not if you use Safari.
OK, as far as I can tell, here's how it's supposed to work (and this is how it works for me in every browser except Safari):
In the "Print" dialog box, click the "Paper Size" drop-down menu (which defaults to "US Letter"), and scroll down to "Manage Custom Sizes…". Create a custom paper size with the desired margins. Now you should be able to select this custom paper size when you print.
This works fine in other browsers (of course you may need to select the custom size from the "Page Setup" menu, but in Safari 4 this is apparently integrated into the "Print" dialog). In Safari, however, the custom margins are completely ignored. A simple, but frustrating, bug …
This has been a known bug, as I've seen it mentioned in other forums, such as:
http://forums.macworld.com/index.php?/topic/117342-safari-4-0-3-printing/
But Apple has yet to fix it.
OK, for those who are wondering, there are two workarounds I know of, neither of which is totally satisfying:
1) When setting the custom paper size, define the paper itself as narrower than 8.5 inches; for example set it to 7.5. Safari doesn't ignore the actual paper size, it just ignores the margins you set. But unfortunately this will result in an increase in both left and right margins, not just the left margin.
2) As I teach Web design, this is the kludge I figured out on my own: Set a user-defined style sheet for Safari. First, create a plain text document consisting of this:
html {
margin-left: .5in;
(Of course, set the margin to your desired width. I'm using a half inch here.) Save this style sheet, calling it something like "safaristyle.css". Now, in Safari's "Advanced"preferences, set this as your custom style sheet. This works great, but unfortunately if you leave Safari on this setting this will result in an increase in the left margin when you view Web pages as well as when you print them. So you can select the custom style sheet only just before printing, and then set it back to "None Selected" when you're not printing.
Am I the only one who finds it odd that Apple still hasn't fixed this little bug?
Does anyone out there know of a better workaround? Thanks for listening.

Set them automatically based on what criteria?
If you just want to set them programatically, then as the Help indicates, use the Printing:Margins property to set those values.
Attachments:
Example_VI_BD.png ‏2 KB

Default page size for printing

Is there a way to configure (i.e., specify non-programatically) the default page size to use when printing in Java? We have several JREs installed on a single Solaris machine. It seems that all but the one that came installed with the OS defaults to a an ISO-A4 page size.
I wrote a test program (see end of post) and compiled using a 1.2.2 JDK. Here are some results:
$ /usr/java/bin/java -cp . PrintPageFormat
Java version: 1.2.2
Page size: 612.0 x 792.0 pts
$ /opt/java-packages/jre-1.4.0_04-solaris-i586/bin/java -cp . PrintPageFormat
Java version: 1.4.0_04
Page size: 595.0 x 842.0 pts
$ /opt/java-packages/jre-1.4.2_08-solaris-i586/bin/java -cp . PrintPageFormat
Java version: 1.4.2_08
Page size: 595.0 x 842.0 pts
$ /opt/jre-1.5.0_04-solaris-i586/bin/java -cp . PrintPageFormat
Java version: 1.5.0_04
Page size: 595.2755813598633 x 841.8897399902344 pts
I've searched the Internet, but cannot find how to go about setting the default page size for a JRE. I've opened a ticket with Sun, and was told you can't do this other than programatically. It seems unreasonable that I would have to recompile my existing applications just to get them to work correctly under newer JREs. Is Sun's response to my ticket correct???
Thanks in advance!
Chris Rorvick
[email protected]
============================================================
import java.awt.print.*;
public class PrintPageFormat
      public static void main(String[] args)
          PrinterJob pj = PrinterJob.getPrinterJob();
          PageFormat pf = pj.defaultPage();
          double w = pf.getWidth();
          double h = pf.getHeight();
          String version = System.getProperty("java.version");
          System.out.println("    Java version: " + version);
          System.out.println("    Page size: " + w + " x " + h + " pts");
}

This problem was fixed by setting the locale variable LC_CTYPE to "C" or "en_US". The JREs 1.4.0 and above deployed on our Linux and Solaris environments all have the system property 'java.awt.printerjob' set to 'sun.print.PSPrinterJob'. This is a subclass of sun.print.RasterPrinterJob which in turn is a subclass of java.awt.print.PrinterJob. So, PSPrinterJob is the actual class of the PrinterJob returned by PrinterJob.getPrinterJob(). Looking at the code of RasterPrinterJob:
        /* Default to A4 paper outside North America.
        String defaultCountry = Locale.getDefault().getCountry();
        if (!Locale.getDefault().equals(Locale.ENGLISH) && // ie "C"
            defaultCountry != null &&
            !defaultCountry.equals(Locale.US.getCountry()) &&
            !defaultCountry.equals(Locale.CANADA.getCountry())) {
            double mmPerInch = 25.4;
            w = Math.rint((210.0*ptsPerInch)/mmPerInch);
            h = Math.rint((297.0*ptsPerInch)/mmPerInch);
            newPaper.setSize(w, h);
            newPaper.setImageableArea(ptsPerInch, ptsPerInch,
                                      w - 2.0*ptsPerInch,
                                      h - 2.0*ptsPerInch);
        }This should have been fairly obvious. Java's locale settings depend on the platform's locale settings (i.e., LC_ variables in this case), and then the default page size is determined (or actually altered) based on that.
I'm kicking myself for not figuring this out much sooner. I would hope Sun is, too! (not me, themselves)

How do I set the default page size for printing on a 8450.

A few days ago I printed some envelopes and now when I print from some programs, the print page size has remained the envelope size. I want to print from any program on letter size paper without changing the settings every time.
Thanks
This question was solved.
View Solution.

This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
Printer settings
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Anyway to create custom page size for designjet 500? wasting way too much paper!

just got a hp designjet 500 from jobsite. hooked up to mac. everything prints fine................
EXCEPT
ok i did a simple test 'strip' in adobe illustrator setting the width of the document to 36" which is the size of the paper roll i'm using. i had placed a couple of strips of the same objects with different color fills close to the bottom of the 'artboard'. when going to select print i realized that the printer only recognizes standard page sizes and does not allow me to change to a custom size to say like 36"w by 4" h. so the print came out in the center of a 48" long size piece of paper which obviously wastes soooo much paper.
so i can't create a custom size print page is there a way to have it print close to the bottom margin, turn off the cutting feature, print it, cut manually then move the paper back via the machine or would i have to do it manually and realign the paper and setup after every print?
thanks in advance!

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Be sure to mention your operating system when you post there.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Efficient page size for print and SWF doc?

I have to create an AR for a client who wishes to have it saved out as a SWF file for online usage, in addition to the printed books. I'm just wondering if there's a more efficient page size, other than 8 1/2 x 11", that would work better for online. As it is, I find the 8 1/2 x 11 size is a bit difficult to turn the pages in SWF. Comments please?
Thanks in advance.
Sandra

You are right and wrong. It stems from terminology and taking this a bit literally. Yes, margins do not print. However, they do print. Typically you set margins as "guides" for page layout and it ends there. If, you have elements that print in the margin areas, then they ( the elements ) will print. Let's say you have a business card layout that equal 2"h x 3.5" w ( horizontal ). You can set a margin of .25" all the way around the card as a guide. Now you apply a background bleed color of 100% Black at 2.25"h x 3.75"w ( 1/8" bleed all the way around ). Eventhough you have a margin of .25", the Black will print entirely including the bleed. Now, Page Margins are different. Most desktop printers do not include bleed in an 8.5" x 11" page size. For instance, my inkjet printer has non-printable areas or page margins that do not print. They equal something like .139" top, left, and right with a bottom margin of .6". Unless your printer has an option for "borderless" printing, there is a non-printable margin in the Page Setup. This is different than layout margins which are printable and used as guides. So, if your desktop printer does not have "borderless" printable areas ( option found in Print > Page Setup ), you'd have to print your 8.5" x 11" layout on a larger page size and then trim it down later. Let me know if you have any other questions. I hope I cleared it up for you. Let me know if I didn't.

Custom page sizes for Photosmart 6515

Just unpacked a Photosmart 6515. Running on old xp desktop computer.
My main item I print is 5.5"x8" but the custom option is grayed out. went to properties through the main printers/faxes set up and no option there either to set up custom sizes.
Is there seriously no option to print custom sizes? im not asking for boarderless. and all other hps I have had have always let me easliy set up this size.
Down to the wire for Christmas, don't want to have to return it and start over.
Please Help
-Frustrated

I was able to fool the printer by changing my paper size for the document to an A4 (actual size is 5.8" x 8.3"). Did some test printing on a scrap cut to 5.5 x 8.5 to see how it printed. Tweeked the layout a little and got it to do what I wanted. Would probably work for your 5.5 x 8 as long as you are not printing edge to edge.
Hope this helps. I've NEVER had a printer that did not allow a custom size. NOT HAPPY about the lack of feature. If anyone can tell me how to put in a custom size for this printer model, PLEASE POST IT!
Merry Christmas!

Set custom font size for one column

hey guys! I am trying to decrease the font-size for one column based on an lov and used
style="font-size:8pt"It does not work though! Do you have a hint?
brgds,
seb

Hello Seb,
>> Might it be important whether the column is of type "...based on lov"?
If by "...based on lov" you mean “Display as Text (based on LOV, does not save state)” the answer is yes. This type of column is not treated as an updatable column (the implementation is by using a regular <td> tag and not the <input> tag) so the Apex engine ignores the Element Attributes field.
As far as I can tell, this column can only be styled in the query itself (and you need to implement the LOV yourself).
Another option is to use a select list and disabled it, but the column will appear in gray, and with small font size it doesn’t look that good.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Forthcoming book about APEX: Oracle Application Express 3.2 – The Essentials and More

Custom Page Sizes - How to change from centimeters to Inches?

Hello,
I'm working on some panoramic prints to an Epson R2400 and I need to set up a custom paper size for printing to roll paper. When I select Custom Page Sizes from the Page Setup dropdown, all my measurements are forced into centimeters. Even if I try and specify it to be in inches when I type in the values, I get an error saying "Invalid Number" because of the " (in mark designation).
And because the input box only allows two decimal places, I can't get accurate inches-to-centimeter conversions because the sizes I need are 3+ decimals when converted to centimeters.
Searching on the web I've come across many pages with info on the Custom Page Sizes dialog box and the images show the values being set in inches, but I've found nowhere that says where you specify where I can change this default measurement?
If anyone could help me, it'd be greatly appreciated!
Thanks,
Kristin.

Answering my own questions.
Because I'm Canadian, in Preferences -> International -> Formats I needed to change "Measurement Units" to "US" instead of "Metric".
k.

Cannot create PDF w/ custom page size in FM 9

I just upgraded to the new Technical Communication Suite and cannot create a PDF from FrameMaker with a custom page size anymore. I need to create a PDF with a page size of 8.125" by 10.875", and have tried both Save As PDF and Print to the PDF driver. I followed all of the instructions on how to do so via the PDF printer driver's "Printing Preferences", Adobe PDF page size, etc. When that didn't work, I also tried Save As PDF with a custom page size ... still won't print to the custom size no matter how many places I specify it.
My only way to get my custom page size at this point is to create the PDF and then go in and modify Document > Crop Pages > Change Page Size to Custom, and specify my size. This is clearly less than desirable.
I am using FM version 9.0p 196. Any help/advice/suggestions welcome!

Cindy,
You should get the FM updates. There have been 3 patches released since the 9.0p196 version. Install them in order.
Before creating PDFs, make certain that your default printer is set to the AdobePDF printer instance. The SetPrint utility from Sundorne helps ensure that this is always the case for FM, see http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm
In the Save As PDF dialogue, set the "Page Size" for the output on the Settings tab, as shown here:
Set your PDF joboptions for the appropriate press requirements.
Set your registration if required.
Make sure the "Convert CMYK Colors to RGB" is set (the PDF CMYK generation is still buggy).
Hit the "Set" button and you should get the correctly sized output.
When you were creating the ouptut via the printer route, if you had set the "Generate Acrobat Data" option, then FM sets the document so that it is always cropped to the FM page size, rather than the printer specified output sheet size, in the final PDF. Omit setting this option and it should work via this route as well.

Custom page size - Serious Frustration

Acrobat is used to setup alot of our work for output. When creating custom page sizes for different jobs, there is no order in the pull down menu for the custom page sizes.
How can I set Acrobat Pro or MacOS X to display the custom page sizes in a numerical order ??
I have tried under both MacOS 10.3.9 and 10.4.2 using both Acrobat Pro 6 and 7. The result is the same. The list of page sizes might be something like this when selecting the pull down menu:
200x410
186x250
350x475
215x275
....etc.
Currently I have ~100 different custom page sizes for different impositions, the only way to work it is a. to search for the right size or b. try to remember where in the list the required custom size is.
There is logical no order to the custom page size listing. Not even deleting existing sizes and recreating in the required order works. Interestingly, when creating a new size the existing sizes appear in numerical order but not when selecting from the pull down menu.
Please help.
Matt.
G5 2.0 x2, 2.5GB Ram, 2x160GB Mac OS X (10.3.9) Acrobat 6 Pro (6.0.4)

I've discovered that this is a SYSTEM issue, NOT an Adobe issue. The custom page setups are also out of any order in "Mail", "TextEdit", "InDesign" etc. etc. The other apps that I use typically have their own paper size interfaces not requiring to use the default apple one. (Eg. Quark / InDesign).
To prove this point I deleted the custom paper settings in Acrobat so that just the default sizes existed and then went into TextEdit and recreated some custom paper sizes using the Page Setup interface. Again, created custom paper sizes DO NOT list in either numerical or chronological order.
The apple system file which controls this is called "com.apple.print.custompapers.plist"
I found this entry on the macosxhints forum:
http://forums.macosxhints.com/showthread.php?t=23681
2 other users noting frustration with the same problem, but it doesn't offer any solution
Is anyone familiar with hacking ".plist" files? Maybe there is way to edit the file to adjust it to a logical order.
G5 2.0 x2, 2.5GB Ram, 2x160GB Mac OS X (10.3.9)

Custom page size in PSE 9 photobooks?

Does anyone know a way that allows one to create a photo book with a freely selected page size, such as 20 x 25 cm in PSE 9? The size options that present themselves when creating a book are quite limited, so I'm wondering whether there is a way to do this?
Best wishes
Karsten

Cindy,
You should get the FM updates. There have been 3 patches released since the 9.0p196 version. Install them in order.
Before creating PDFs, make certain that your default printer is set to the AdobePDF printer instance. The SetPrint utility from Sundorne helps ensure that this is always the case for FM, see http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm
In the Save As PDF dialogue, set the "Page Size" for the output on the Settings tab, as shown here:
Set your PDF joboptions for the appropriate press requirements.
Set your registration if required.
Make sure the "Convert CMYK Colors to RGB" is set (the PDF CMYK generation is still buggy).
Hit the "Set" button and you should get the correctly sized output.
When you were creating the ouptut via the printer route, if you had set the "Generate Acrobat Data" option, then FM sets the document so that it is always cropped to the FM page size, rather than the printer specified output sheet size, in the final PDF. Omit setting this option and it should work via this route as well.

Set custom page size for printing

Similar Messages

Maybe you are looking for