Error in Source System while running the Full Load

HI Experts,
We are using 0CRM_UT_SRV_CONT_I datasource from CRM to extract data.
It is giving error while running the full load as 'Error Occured in Source system' with messaage Number : RSM340.
I  want to mention certain points here:
1) In RSA3 its running fine.
2) Connection between BW and CRM system is OK.
3) We have replicated datasource and send active veriosn from Dev system.
4) When I run Init without data, Init set sucessful with entry in RSA7 in CRM.
5) Delta run fine with green status.
6) As source system is static client, hence do data for delta.
The Main issue happens when we run either the Full load or Init With Data transfer.
Kindly suggest.
Thanks
Mayank

Hi Mayank,
see in source system (CRM) with transaction SM21 and ST22 the error log and and then you let us know.
Charly

Similar Messages

  • Error in source system while extracting the data from R/3!

    Hi,
    i had created FM and extract strcucture in R/3 .
    using the above two, i had created data source using RSO2 T code.
    when i checked the extractor ( RSA3 T code) in R/3  it was working fine .
    (status messege displayed as 1000 records selected).
    then i assigned  this data source to infocurce and creted info cube using the same info source.
    but when i schedule the info package it is syaing in the monitor screen "error in source system".
    what could be the problem?
    Thanks,
    Ravi

    Hi
    trhese are the possiblies
    1.first check the source system connection and find if there is any error in it.
    2.Go to sm37 and find whether the  request is completed or not if its terminated find out the time. how long does it takes to complete the process.
    3.once again relicate the data source and find whether is it again extract data.

  • "Error in source system" while creating source system

    Hello,
    I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
    When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
    The error occurs after the information "Please log on as an administrator in the following screen".
    The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
    What else could be the problem?
    Greetings & Thanks
    Bettina

    Hello,
    now we know that
    1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
    2. the system has to be changeable (scc4 and se03)
    After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
    Thanks for the tip regarding the authorizations.
    Greetings
    Bettina

  • Error in Source System While Uploading Data from ODS to Data Target

    Hi All,
    Iam getting Following Error while Uploading data from ODS to Data Target
    a) Error in Source System.
    b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
    Message no. R3016
    Diagnosis
    DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
    The time stamp in the source system is 21.06.2005 07:31:33.
    The time stamp in the BW system is 27.11.2004 17:41:45.
    Regards,
    Chakri

    This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
    1. Check for the coonect between the sourse & target systems
    2 . Replicate the data sourcses.
    3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
    Thanks ,
    PSG

  • Error While running the ETL Load in DAC (BI Financial Analytics)

    Hi All,
    I have Installed and Configured BI Applictions 7.9.5 and Informatic8.1.1. For the first time when we run the ETL Load in DAC it has failed.for us every Test Connection was sucess.and getting the error message as below.
    The log file which I pasted below is from the path
    /u01/app/oracle/product/Informatica/PowerCenter8.1.1/server/infa_shared
    /SessLogs
    SDE_ORAR12_Adaptor.SDE_ORA_GL_AP_LinkageInformation_Extract_Full.log
    DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
    DIRECTOR> VAR_27028 Use override value [ORA_R12] for session parameter:[$DBConnection_OLTP].
    DIRECTOR> VAR_27028 Use override value [9] for mapping parameter:[$$DATASOURCE_NUM_ID].
    DIRECTOR> VAR_27028 Use override value ['Y'] for mapping parameter:[$$FILTER_BY_LEDGER_ID].
    DIRECTOR> VAR_27028 Use override value ['N'] for mapping parameter:[$$FILTER_BY_LEDGER_TYPE].
    DIRECTOR> VAR_27028 Use override value [04/02/2007] for mapping parameter:[$$INITIAL_EXTRACT_DATE].
    DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$LAST_EXTRACT_DATE].
    DIRECTOR> VAR_27028 Use override value [1] for mapping parameter:[$$LEDGER_ID_LIST].
    DIRECTOR> VAR_27028 Use override value ['NONE'] for mapping parameter:[$$LEDGER_TYPE_LIST].
    DIRECTOR> TM_6014 Initializing session [SDE_ORA_GL_AP_LinkageInformation_Extract_Full] at [Thu Feb 12 12:49:33 2009]
    DIRECTOR> TM_6683 Repository Name: [DEV_Oracle_BI_DW_Rep]
    DIRECTOR> TM_6684 Server Name: [DEV_Oracle_BI_DW_Rep_Integration_Service]
    DIRECTOR> TM_6686 Folder: [SDE_ORAR12_Adaptor]
    DIRECTOR> TM_6685 Workflow: [SDE_ORA_GL_AP_LinkageInformation_Extract_Full]
    DIRECTOR> TM_6101 Mapping name: SDE_ORA_GL_AP_LinkageInformation_Extract [version 1]
    DIRECTOR> TM_6827 [u01/app/oracle/product/Informatica/PowerCenter8.1.1/server/infa_shared/Storage] will be used as storage directory for session [SDE_ORA_GL_AP_LinkageInformation_Extract_Full].
    DIRECTOR> CMN_1805 Recovery cache will be deleted when running in normal mode.
    DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
    DIRECTOR> TM_6708 Using configuration property [SiebelUnicodeDB,apps@devr12 bawdev@devbi]
    DIRECTOR> TM_6703 Session [SDE_ORA_GL_AP_LinkageInformation_Extract_Full] is run by 64-bit Integration Service [node01_oratestbi], version [8.1.1 SP4], build [0817].
    MANAGER> PETL_24058 Running Partition Group [1].
    MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
    MANAGER> PETL_24001 Parallel Pipeline Engine running.
    MANAGER> PETL_24003 Initializing session run.
    MAPPING> CMN_1569 Server Mode: [ASCII]
    MAPPING> CMN_1570 Server Code page: [ISO 8859-1 Western European]
    MAPPING> TM_6151 Session Sort Order: [Binary]
    MAPPING> TM_6156 Using LOW precision decimal arithmetic
    MAPPING> TM_6180 Deadlock retry logic will not be implemented.
    MAPPING> TM_6307 DTM Error Log Disabled.
    MAPPING> TE_7022 TShmWriter: Initialized
    MAPPING> TE_7004 Transformation Parse Warning; transformation continues...
    MAPPING> TE_7004 Transformation Parse Warning; transformation continues...
    MAPPING> TE_7004 Transformation Parse Warning; transformation continues...
    MAPPING> TE_7004 Transformation Parse Warning; transformation continues...
    MAPPING> TE_7004 Transformation Parse Warning; transformation continues...
    MAPPING> TE_7004 Transformation Parse Warning; transformation continues...
    MAPPING> TM_6007 DTM initialized successfully for session [SDE_ORA_GL_AP_LinkageInformation_Extract_Full]
    DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
    MANAGER> PETL_24004 Starting pre-session tasks. : (Thu Feb 12 12:49:34 2009)
    MANAGER> PETL_24027 Pre-session task completed successfully. : (Thu Feb 12 12:49:34 2009)
    DIRECTOR> PETL_24006 Starting data movement.
    MAPPING> TM_6660 Total Buffer Pool size is 12582912 bytes and Block size is 128000 bytes.
    READER_1_1_1> DBG_21438 Reader: Source is [devr12.tessco.com], user [apps]
    READER_1_1_1> BLKR_16003 Initialization completed successfully.
    WRITER_1_*_1> WRT_8146 Writer: Target is database [DEVBI], user [bawdev], bulk mode [ON]
    WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
    WRITER_1_*_1> WRT_8124 Target Table W_GL_LINKAGE_INFORMATION_GS :SQL INSERT statement:
    INSERT INTO W_GL_LINKAGE_INFORMATION_GS(SOURCE_DISTRIBUTION_ID,JOURNAL_LINE_INTEGRATION_ID,LEDGER_ID,LEDGER_TYPE,DISTRIBUTION_SOURCE,JE_BATCH_NAME,JE_HEADER_NAME,JE_LINE_NUM,POSTED_ON_DT,SLA_TRX_INTEGRATION_ID,DATASOURCE_NUM_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
    WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_GL_LINKAGE_INFORMATION_GS]
    WRITER_1_*_1> WRT_8003 Writer initialization complete.
    READER_1_1_1> BLKR_16007 Reader run started.
    WRITER_1_*_1> WRT_8005 Writer run started.
    WRITER_1_*_1> WRT_8158
    *****START LOAD SESSION*****
    Load Start Time: Thu Feb 12 12:49:34 2009
    Target tables:
    W_GL_LINKAGE_INFORMATION_GS
    READER_1_1_1> RR_4029 SQ Instance [SQ_XLA_AE_LINES] User specified SQL Query [SELECT
    DLINK.SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
    DLINK.SOURCE_DISTRIBUTION_TYPE SOURCE_TABLE,
    DLINK.ACCOUNTING_LINE_CODE LINE_CODE,
          AELINE.ACCOUNTING_CLASS_CODE,
    GLIMPREF.JE_HEADER_ID JE_HEADER_ID,
    GLIMPREF.JE_LINE_NUM JE_LINE_NUM,
    AELINE.AE_HEADER_ID AE_HEADER_ID,
    AELINE.AE_LINE_NUM AE_LINE_NUM,
    T.LEDGER_ID LEDGER_ID,
    T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
        JBATCH.NAME BATCH_NAME,
       JHEADER.NAME HEADER_NAME,
          PER.END_DATE
    FROM XLA_DISTRIBUTION_LINKS DLINK
       , GL_IMPORT_REFERENCES        GLIMPREF
       , XLA_AE_LINES                              AELINE
       , GL_JE_HEADERS                         JHEADER
       , GL_JE_BATCHES                         JBATCH
       , GL_LEDGERS                                 T
       , GL_PERIODS   PER
    WHERE DLINK.SOURCE_DISTRIBUTION_TYPE IN
             (  'AP_INV_DIST', 'AP_PMT_DIST'
              , 'AP_PREPAY')
    AND DLINK.APPLICATION_ID = 200
    AND AELINE.APPLICATION_ID = 200
    AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
    AND AELINE.GL_SL_LINK_ID         = GLIMPREF.GL_SL_LINK_ID
    AND AELINE.AE_HEADER_ID         = DLINK.AE_HEADER_ID        
    AND AELINE.AE_LINE_NUM           = DLINK.AE_LINE_NUM
    AND GLIMPREF.JE_HEADER_ID   = JHEADER.JE_HEADER_ID
    AND JHEADER.JE_BATCH_ID       = JBATCH.JE_BATCH_ID
    AND JHEADER.LEDGER_ID                   = T.LEDGER_ID
    AND JHEADER.STATUS                         = 'P'
    AND T.PERIOD_SET_NAME = PER.PERIOD_SET_NAME
    AND JHEADER.PERIOD_NAME = PER.PERIOD_NAME
    AND JHEADER.CREATION_DATE >=
              TO_DATE('04/02/2007 00:00:00'
                    , 'MM/DD/YYYY HH24:MI:SS' )
    AND DECODE('Y', 'Y', T.LEDGER_ID, 1) IN (1)
    AND DECODE('N', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') IN ('NONE')]
    READER_1_1_1> RR_4049 SQL Query issued to database : (Thu Feb 12 12:49:34 2009)
    READER_1_1_1> CMN_1761 Timestamp Event: [Thu Feb 12 12:49:34 2009]
    READER_1_1_1> RR_4035 SQL Error [
    ORA-01114: IO error writing block to file 513 (block # 328465)
    ORA-27072: File I/O error
    Linux-x86_64 Error: 28: No space left on device
    Additional information: 4
    Additional information: 328465
    Additional information: -1
    ORA-01114: IO error writing block to file 513 (block # 328465)
    ORA-27072: File I/O error
    Linux-x86_64 Error: 28: No space left on device
    Additional information: 4
    Additional information: 328465
    Additional information: -1
    Database driver error...
    Function Name : Execute
    SQL Stmt : SELECT
    DLINK.SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
    DLINK.SOURCE_DISTRIBUTION_TYPE SOURCE_TABLE,
    DLINK.ACCOUNTING_LINE_CODE LINE_CODE,
    AELINE.ACCOUNTING_CLASS_CODE,
    GLIMPREF.JE_HEADER_ID JE_HEADER_ID,
    GLIMPREF.JE_LINE_NUM JE_LINE_NUM,
    AELINE.AE_HEADER_ID AE_HEADER_ID,
    AELINE.AE_LINE_NUM AE_LINE_NUM,
    T.LEDGER_ID LEDGER_ID,
    T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
    JBATCH.NAME BATCH_NAME,
    JHEADER.NAME HEADER_NAME,
    PER.END_DATE
    FROM XLA_DISTRIBUTION_LINKS DLINK
    , GL_IMPORT_REFERENCES GLIMPREF
    , XLA_AE_LINES AELINE
    , GL_JE_HEADERS JHEADER
    , GL_JE_BATCHES JBATCH
    , GL_LEDGERS T
    , GL_PERIODS PER
    WHERE DLINK.SOURCE_DISTRIBUTION_TYPE IN
    ( 'AP_INV_DIST', 'AP_PMT_DIST'
    , 'AP_PREPAY')
    AND DLINK.APPLICATION_ID = 200
    AND AELINE.APPLICATION_ID = 200
    AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
    AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
    AND AELINE.AE_HEADER_ID = DLINK.AE_HEADER_ID
    AND AELINE.AE_LINE_NUM = DLINK.AE_LINE_NUM
    AND GLIMPREF.JE_HEADER_ID = JHEADER.JE_HEADER_ID
    AND JHEADER.JE_BATCH_ID = JBATCH.JE_BATCH_ID
    AND JHEADER.LEDGER_ID = T.LEDGER_ID
    AND JHEADER.STATUS = 'P'
    AND T.PERIOD_SET_NAME = PER.PERIOD_SET_NAME
    AND JHEADER.PERIOD_NAME = PER.PERIOD_NAME
    AND JHEADER.CREATION_DATE >=
    TO_DATE('04/02/2007 00:00:00'
    , 'MM/DD/YYYY HH24:MI:SS' )
    AND DECODE('Y', 'Y', T.LEDGER_ID, 1) IN (1)
    AND DECODE('N', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') IN ('NONE')
    Oracle Fatal Error
    Database driver error...
    Function Name : Execute
    SQL Stmt : SELECT
    DLINK.SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
    DLINK.SOURCE_DISTRIBUTION_TYPE SOURCE_TABLE,
    DLINK.ACCOUNTING_LINE_CODE LINE_CODE,
    AELINE.ACCOUNTING_CLASS_CODE,
    GLIMPREF.JE_HEADER_ID JE_HEADER_ID,
    GLIMPREF.JE_LINE_NUM JE_LINE_NUM,
    AELINE.AE_HEADER_ID AE_HEADER_ID,
    AELINE.AE_LINE_NUM AE_LINE_NUM,
    T.LEDGER_ID LEDGER_ID,
    T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
    JBATCH.NAME BATCH_NAME,
    JHEADER.NAME HEADER_NAME,
    PER.END_DATE
    FROM XLA_DISTRIBUTION_LINKS DLINK
    , GL_IMPORT_REFERENCES GLIMPREF
    , XLA_AE_LINES AELINE
    , GL_JE_HEADERS JHEADER
    , GL_JE_BATCHES JBATCH
    , GL_LEDGERS T
    , GL_PERIODS PER
    WHERE DLINK.SOURCE_DISTRIBUTION_TYPE IN
    ( 'AP_INV_DIST', 'AP_PMT_DIST'
    , 'AP_PREPAY')
    AND DLINK.APPLICATION_ID = 200
    AND AELINE.APPLICATION_ID = 200
    AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
    AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
    AND AELINE.AE_HEADER_ID = DLINK.AE_HEADER_ID
    AND AELINE.AE_LINE_NUM = DLINK.AE_LINE_NUM
    AND GLIMPREF.JE_HEADER_ID = JHEADER.JE_HEADER_ID
    AND JHEADER.JE_BATCH_ID = JBATCH.JE_BATCH_ID
    AND JHEADER.LEDGER_ID = T.LEDGER_ID
    AND JHEADER.STATUS = 'P'
    AND T.PERIOD_SET_NAME = PER.PERIOD_SET_NAME
    AND JHEADER.PERIOD_NAME = PER.PERIOD_NAME
    AND JHEADER.CREATION_DATE >=
    TO_DATE('04/02/2007 00:00:00'
    , 'MM/DD/YYYY HH24:MI:SS' )
    AND DECODE('Y', 'Y', T.LEDGER_ID, 1) IN (1)
    AND DECODE('N', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') IN ('NONE')
    Oracle Fatal Error].
    READER_1_1_1> CMN_1761 Timestamp Event: [Thu Feb 12 12:49:34 2009]
    READER_1_1_1> BLKR_16004 ERROR: Prepare failed.
    WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
    WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_GL_LINKAGE_INFORMATION_GS] at end of load
    WRITER_1_*_1> WRT_8035 Load complete time: Thu Feb 12 12:49:34 2009
    LOAD SUMMARY
    ============
    WRT_8036 Target: W_GL_LINKAGE_INFORMATION_GS (Instance Name: [W_GL_LINKAGE_INFORMATION_GS])
    WRT_8044 No data loaded for this target
    WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
    MANAGER> PETL_24031
    ***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
    Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_XLA_AE_LINES] has completed: Total Run Time = [0.673295] secs, Total Idle Time = [0.000000] secs, Busy Percentage = [100.000000].
    Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_XLA_AE_LINES] has completed. The total run time was insufficient for any meaningful statistics.
    Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_GL_LINKAGE_INFORMATION_GS] has completed. The total run time was insufficient for any meaningful statistics.
    MANAGER> PETL_24005 Starting post-session tasks. : (Thu Feb 12 12:49:35 2009)
    MANAGER> PETL_24029 Post-session task completed successfully. : (Thu Feb 12 12:49:35 2009)
    MAPPING> TM_6018 Session [SDE_ORA_GL_AP_LinkageInformation_Extract_Full] run completed with [0] row transformation errors.
    MANAGER> PETL_24002 Parallel Pipeline Engine finished.
    DIRECTOR> PETL_24013 Session run completed with failure.
    DIRECTOR> TM_6022
    SESSION LOAD SUMMARY
    ================================================
    DIRECTOR> TM_6252 Source Load Summary.
    DIRECTOR> CMN_1740 Table: [SQ_XLA_AE_LINES] (Instance Name: [SQ_XLA_AE_LINES])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
    DIRECTOR> TM_6253 Target Load Summary.
    DIRECTOR> CMN_1740 Table: [W_GL_LINKAGE_INFORMATION_GS] (Instance Name: [W_GL_LINKAGE_INFORMATION_GS])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
    DIRECTOR> TM_6023
    ===================================================
    DIRECTOR> TM_6020 Session [SDE_ORA_GL_AP_LinkageInformation_Extract_Full] completed at [Thu Feb 12 12:49:36 2009]
    Thanks in Advance,
    Prashanth
    Edited by: user10719430 on Feb 11, 2009 7:33 AM
    Edited by: user10719430 on Feb 12, 2009 11:31 AM

    Need to increase temp tablespace.

  • BE3.5 : Error from the source system while activating the transfer rule

    When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error  in [[  ]]
    Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
    Diagnosis
    An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
    System response
    The action was terminated. No data was changed.
    Procedure
    Use the generation log in source system CI2220 to identify the error, and remove the cause.
    CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
    Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
    Thanks in advance
    Arunabha

    Hi Arunabha,
    I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
    If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
    Cheers!

  • Project Analytics 7.9.6.1 - Error while running a full load

    Hi All,
    I am performing a full load for Projects Analytics and get the following error,
    =====================================
    ERROR OUTPUT
    =====================================
    1103 SEVERE Wed Nov 18 02:49:36 WST 2009 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Gl_Account
    1104 SEVERE Wed Nov 18 02:49:36 WST 2009
    ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_CodeDimension_Gl_Account:(Source : FULL Target : FULL)
    MESSAGE:::
    Irrecoverable Error
    Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Gl_Account
    Error Code = 36331:Unknown reason for error code 36331
    Pmcmd output :
    Session log initialises NULL value to mapping parameter MPLT_ADI_CODES.$$CATEGORY. This is then used insupsequent SQL and results in ORA-00936: missing expression error following are the initialization section and the load section containing the error in the log
    Initialisation
    DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
    DIRECTOR> VAR_27028 Use override value [ORA_11_5_10] for session parameter:[$DBConnection_OLTP].
    DIRECTOR> VAR_27028 Use override value [ORA_11_5_10.DATAWAREHOUSE.SDE_ORA11510_Adaptor.SDE_ORA_CodeDimension_Gl_Account_Segments.log] for session parameter:[$PMSessionLogFile].
    DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[MPLT_ADI_CODES.$$CATEGORY].
    DIRECTOR> VAR_27028 Use override value [4] for mapping parameter:[MPLT_SA_ORA_CODES.$$DATASOURCE_NUM_ID].
    DIRECTOR> VAR_27028 Use override value [DEFAULT] for mapping parameter:[MPLT_SA_ORA_CODES.$$TENANT_ID].
    DIRECTOR> TM_6014 Initializing session [SDE_ORA_CodeDimension_Gl_Account_Segments] at [Wed Nov 18 02:49:11 2009].
    DIRECTOR> TM_6683 Repository Name: [repo_service]
    DIRECTOR> TM_6684 Server Name: [int_service]
    DIRECTOR> TM_6686 Folder: [SDE_ORA11510_Adaptor]
    DIRECTOR> TM_6685 Workflow: [SDE_ORA_CodeDimension_Gl_Account_Segments] Run Instance Name: [] Run Id: [17]
    DIRECTOR> TM_6101 Mapping name: SDE_ORA_CodeDimension_GL_Account_Segments [version 1].
    DIRECTOR> TM_6963 Pre 85 Timestamp Compatibility is Enabled
    DIRECTOR> TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS]
    DIRECTOR> TM_6827 [C:\Informatica\PowerCenter8.6.1\server\infa_shared\Storage] will be used as storage directory for session [SDE_ORA_CodeDimension_Gl_Account_Segments].
    DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
    DIRECTOR> TM_6703 Session [SDE_ORA_CodeDimension_Gl_Account_Segments] is run by 32-bit Integration Service [node01_ASG596138], version [8.6.1], build [1218].
    MANAGER> PETL_24058 Running Partition Group [1].
    MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
    MANAGER> PETL_24001 Parallel Pipeline Engine running.
    MANAGER> PETL_24003 Initializing session run.
    MAPPING> CMN_1569 Server Mode: [UNICODE]
    MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
    MAPPING> TM_6151 The session sort order is [Binary].
    MAPPING> TM_6185 Warning. Code page validation is disabled in this session.
    MAPPING> TM_6156 Using low precision processing.
    MAPPING> TM_6180 Deadlock retry logic will not be implemented.
    MAPPING> TM_6307 DTM error log disabled.
    MAPPING> TE_7022 TShmWriter: Initialized
    MAPPING> DBG_21075 Connecting to database [orcl], user [DAC_REP]
    MAPPING> CMN_1716 Lookup [mplt_ADI_Codes.Lkp_Master_Map] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
    MAPPING> CMN_1716 Lookup [mplt_ADI_Codes.Lkp_Master_Code] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
    MAPPING> CMN_1716 Lookup [mplt_ADI_Codes.Lkp_W_CODE_D] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
    MAPPING> TM_6007 DTM initialized successfully for session [SDE_ORA_CodeDimension_Gl_Account_Segments]
    DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
    MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Nov 18 02:49:14 2009)
    MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Nov 18 02:49:14 2009)
    DIRECTOR> PETL_24006 Starting data movement.
    MAPPING> TM_6660 Total Buffer Pool size is 32000000 bytes and Block size is 128000 bytes.
    READER_1_1_1> DBG_21438 Reader: Source is [asgdev], user [APPS]
    READER_1_1_1> BLKR_16051 Source database connection [ORA_11_5_10] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
    READER_1_1_1> BLKR_16003 Initialization completed successfully.
    WRITER_1_*_1> WRT_8147 Writer: Target is database [orcl], user [DAC_REP], bulk mode [OFF]
    WRITER_1_*_1> WRT_8221 Target database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
    WRITER_1_*_1> WRT_8124 Target Table W_CODE_D :SQL INSERT statement:
    INSERT INTO W_CODE_D(DATASOURCE_NUM_ID,SOURCE_CODE,SOURCE_CODE_1,SOURCE_CODE_2,SOURCE_CODE_3,SOURCE_NAME_1,SOURCE_NAME_2,CATEGORY,LANGUAGE_CODE,MASTER_DATASOURCE_NUM_ID,MASTER_CODE,MASTER_VALUE,W_INSERT_DT,W_UPDATE_DT,TENANT_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
    WRITER_1_*_1> WRT_8124 Target Table W_CODE_D :SQL UPDATE statement:
    UPDATE W_CODE_D SET SOURCE_CODE_1 = ?, SOURCE_CODE_2 = ?, SOURCE_CODE_3 = ?, SOURCE_NAME_1 = ?, SOURCE_NAME_2 = ?, MASTER_DATASOURCE_NUM_ID = ?, MASTER_CODE = ?, MASTER_VALUE = ?, W_INSERT_DT = ?, W_UPDATE_DT = ?, TENANT_ID = ? WHERE DATASOURCE_NUM_ID = ? AND SOURCE_CODE = ? AND CATEGORY = ? AND LANGUAGE_CODE = ?
    WRITER_1_*_1> WRT_8124 Target Table W_CODE_D :SQL DELETE statement:
    DELETE FROM W_CODE_D WHERE DATASOURCE_NUM_ID = ? AND SOURCE_CODE = ? AND CATEGORY = ? AND LANGUAGE_CODE = ?
    WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_CODE_D]
    WRITER_1_*_1> WRT_8003 Writer initialization complete.
    READER_1_1_1> BLKR_16007 Reader run started.
    WRITER_1_*_1> WRT_8005 Writer run started.
    WRITER_1_*_1> WRT_8158
    Load section
    *****START LOAD SESSION*****
    Load Start Time: Wed Nov 18 02:49:16 2009
    Target tables:
    W_CODE_D
    READER_1_1_1> RR_4029 SQ Instance [mplt_BC_ORA_Codes_GL_Account_Segments.Sq_Fnd_Flex_Values] User specified SQL Query [SELECT
    FND_FLEX_VALUES.FLEX_VALUE_SET_ID,
    FND_FLEX_VALUES.FLEX_VALUE,
    MAX(FND_FLEX_VALUES_TL.DESCRIPTION),
    FND_ID_FLEX_SEGMENTS.ID_FLEX_NUM,
    FND_ID_FLEX_SEGMENTS.APPLICATION_COLUMN_NAME
    FROM
    FND_FLEX_VALUES,
    FND_FLEX_VALUES_TL,
    FND_ID_FLEX_SEGMENTS,
    FND_SEGMENT_ATTRIBUTE_VALUES
    WHERE
    FND_FLEX_VALUES.FLEX_VALUE_ID = FND_FLEX_VALUES_TL.FLEX_VALUE_ID AND FND_FLEX_VALUES_TL.LANGUAGE ='US' AND
    FND_ID_FLEX_SEGMENTS.FLEX_VALUE_SET_ID =FND_FLEX_VALUES.FLEX_VALUE_SET_ID AND
    FND_ID_FLEX_SEGMENTS.APPLICATION_ID = 101 AND
    FND_ID_FLEX_SEGMENTS.ID_FLEX_CODE ='GL#' AND
    FND_ID_FLEX_SEGMENTS.ID_FLEX_NUM =FND_SEGMENT_ATTRIBUTE_VALUES.ID_FLEX_NUM AND
    FND_SEGMENT_ATTRIBUTE_VALUES.APPLICATION_ID =101 AND
    FND_SEGMENT_ATTRIBUTE_VALUES.ID_FLEX_CODE = 'GL#' AND
    FND_ID_FLEX_SEGMENTS.APPLICATION_COLUMN_NAME=FND_SEGMENT_ATTRIBUTE_VALUES.APPLICATION_COLUMN_NAME AND
    FND_SEGMENT_ATTRIBUTE_VALUES.ATTRIBUTE_VALUE ='Y'
    GROUP BY
    FND_FLEX_VALUES.FLEX_VALUE_SET_ID,
    FND_FLEX_VALUES.FLEX_VALUE,
    FND_ID_FLEX_SEGMENTS.ID_FLEX_NUM,
    FND_ID_FLEX_SEGMENTS.APPLICATION_COLUMN_NAME]
    READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Nov 18 02:49:17 2009)
    READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Nov 18 02:49:17 2009)
    LKPDP_3> DBG_21312 Lookup Transformation [mplt_ADI_Codes.Lkp_W_CODE_D]: Lookup override sql to create cache: SELECT W_CODE_D.SOURCE_NAME_1 AS SOURCE_NAME_1, W_CODE_D.SOURCE_NAME_2 AS SOURCE_NAME_2, W_CODE_D.MASTER_DATASOURCE_NUM_ID AS MASTER_DATASOURCE_NUM_ID, W_CODE_D.MASTER_CODE AS MASTER_CODE, W_CODE_D.MASTER_VALUE AS MASTER_VALUE, W_CODE_D.W_INSERT_DT AS W_INSERT_DT, W_CODE_D.TENANT_ID AS TENANT_ID, W_CODE_D.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, W_CODE_D.SOURCE_CODE AS SOURCE_CODE, W_CODE_D.CATEGORY AS CATEGORY, W_CODE_D.LANGUAGE_CODE AS LANGUAGE_CODE FROM W_CODE_D
    WHERE
    W_CODE_D.CATEGORY IN () ORDER BY DATASOURCE_NUM_ID,SOURCE_CODE,CATEGORY,LANGUAGE_CODE,SOURCE_NAME_1,SOURCE_NAME_2,MASTER_DATASOURCE_NUM_ID,MASTER_CODE,MASTER_VALUE,W_INSERT_DT,TENANT_ID
    LKPDP_3> TE_7212 Increasing [Index Cache] size for transformation [mplt_ADI_Codes.Lkp_W_CODE_D] from [1000000] to [4734976].
    LKPDP_3> TE_7212 Increasing [Data Cache] size for transformation [mplt_ADI_Codes.Lkp_W_CODE_D] from [2000000] to [2007040].
    READER_1_1_1> BLKR_16019 Read [625] rows, read [0] error rows for source table [FND_ID_FLEX_SEGMENTS] instance name [mplt_BC_ORA_Codes_GL_Account_Segments.FND_ID_FLEX_SEGMENTS]
    READER_1_1_1> BLKR_16008 Reader run completed.
    LKPDP_3> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
    LKPDP_3:READER_1_1> DBG_21438 Reader: Source is [orcl], user [DAC_REP]
    LKPDP_3:READER_1_1> BLKR_16051 Source database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
    LKPDP_3:READER_1_1> BLKR_16003 Initialization completed successfully.
    LKPDP_3:READER_1_1> BLKR_16007 Reader run started.
    LKPDP_3:READER_1_1> RR_4049 SQL Query issued to database : (Wed Nov 18 02:49:18 2009)
    LKPDP_3:READER_1_1> CMN_1761 Timestamp Event: [Wed Nov 18 02:49:18 2009]
    LKPDP_3:READER_1_1> RR_4035 SQL Error [
    ORA-00936: missing expression
    Could you please suggest what the issue might be and how it can be fixed?
    Many thanks,
    Kiran

    I have continued related detains in the following thread,
    Mapping Parameter  $$CATEGORY not included in the parameter file (7.9.6.1)
    Apologies for the inconvenience.
    Thanks,
    Kiran

  • Errors: ORA-00054 & ORA-01452 while running DAC Full Load

    Hi Friends,
    Previously, I ran full load...it went well. And, I did some sample reports also in BI APPS 7.9.6.2
    Now, I modified few parameters as per the Business and I try to run Full Load again...But I struck with few similar errors. I cleared couple of DB Errors.
    Please, help me out to solve the below errors.
    1. ANOMALY INFO::: Error while executing : TRUNCATE TABLE:W_SALES_BOOKING_LINE_F
    MESSAGE:::com.siebel.etl.database.IllegalSQLQueryException: DataWarehouse:TRUNCATE TABLE W_SALES_BOOKING_LINE_F
    ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired
    --I checked W_SALES_BOOKING_LINE_F, it contain s data.
    2. ANOMALY INFO::: Error while executing : CREATE INDEX:W_GL_REVN_F:W_GL_REVN_F_U1
    MESSAGE:::java.lang.Exception: Error while execution : CREATE UNIQUE INDEX
         W_GL_REVN_F_U1
    ON
         W_GL_REVN_F
         INTEGRATION_ID ASC
         ,DATASOURCE_NUM_ID ASC
    NOLOGGING
    with error DataWarehouse:CREATE UNIQUE INDEX
         W_GL_REVN_F_U1
    ON
         W_GL_REVN_F
         INTEGRATION_ID ASC
         ,DATASOURCE_NUM_ID ASC
    NOLOGGING
    ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
    -- Yes, I found duplicate values in this table W_GL_REVN_F. But, how can I rectify it. I did some engineering, but failed.
    please tell me the steps to acheive....
    Thanks in advance..
    Stone

    Hi, Please see the answers (in bold) below.
    1. ANOMALY INFO::: Error while executing : TRUNCATE TABLE:W_SALES_BOOKING_LINE_F
    MESSAGE:::com.siebel.etl.database.IllegalSQLQueryException: DataWarehouse:TRUNCATE TABLE W_SALES_BOOKING_LINE_F
    ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired
    --I checked W_SALES_BOOKING_LINE_F, it contain s data.
    Just restart the load, It seems like your DB processes are busy and the table still has a  lock on it which means something is not yet Commited/Rolled Back.
    If this issue repeats you can mail your DBA and ask him to look in to the issue
    2. ANOMALY INFO::: Error while executing : CREATE INDEX:W_GL_REVN_F:W_GL_REVN_F_U1
    MESSAGE:::java.lang.Exception: Error while execution : CREATE UNIQUE INDEX
    W_GL_REVN_F_U1
    ON
    W_GL_REVN_F
    INTEGRATION_ID ASC
         ,DATASOURCE_NUM_ID ASC
         NOLOGGING
         with error DataWarehouse:CREATE UNIQUE INDEX
         W_GL_REVN_F_U1
         ON
         W_GL_REVN_F
         INTEGRATION_ID ASC
         ,DATASOURCE_NUM_ID ASC
         NOLOGGING
         ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
         -- Yes, I found duplicate values in this table W_GL_REVN_F. But, how can I rectify it. I did some engineering, but failed.
         please tell me the steps to achieve....
    please execute this sql and get the duplicate values. If the count is less you can delete the records based on ROW_WID
    How  many duplicates do you have in total?
    *1. SELECT INTEGRATION_ID,DATASOURCE_NUM_ID,count(*) FROM W_GL_REVN_F*
    GROUP BY INTEGRATION_ID, DATASOURCE_NUM_ID
    HAVING COUNT()>1*
    *2. SELECT ROW_WID,DATASOURCE_NUM_ID,INTEGRATION_ID FROM W_GL_REVN_F*
    WHERE INTEGRATION_ID= (from 1st query)
    *3. DELETE from W_GL_REVN_F where ROW_WID=( from 2nd query)*
    Hope this helps !!

  • Error F107:Restrict Period while running the report RFUMSV50

    Hello Experts,
    I am facing the problem while runing the report RFUMSV50.
    I am running it first time and getting this error F107:Restrict Period
    Kindly guide me
    Regards
    Naveen

    Hi Naveen
    Before execute select the variant which is already defined.
    Regards,
    Anji.
    Edited by: anjiee on May 11, 2010 1:17 PM

  • Error in ERP system  while copying the document from CRM system

    Hi Friends,
    I have created a CRM sales order in CRM Web Ui or Gui. I am getting this Errors.
    Diagnosis
    Errors occurred while transferring the document into another system. To view the error messages, see the enclosed log.
    Transmission log
    u2022     Product  cannot be recoded for ERP System  (Notification E CRM_ORDER_MISC 015)
    u2022     Product  cannot be recoded for ERP System (Notification E CRM_ORDER_MISC 015)
    u2022     No customer is assigned to business partner 417283 (Notification E CRM_BUPA_MAPPING 002)
    Please give suggestions what can i do for this.Please specify clearly the required steps to debug this error
    also
    with respect to first error ,I tried to replicates the product from crm to ERP system in COMMPR01(Send to ERP Option), but it has given this error.
    "input data for industrial material is not fully"
    regards,
    sunil

    Hi Sunil,
    You are getting error in the Sales Order is because of Master Data.
    Sales Documents will flow from CRM to R/3 when master data is consistent in R/3 & CRM side.
    Please maintain the master data in R/3 side & download into CRM Side.
    For Customer use adpater object CUSTOMER_MAIN & for Material object is "Material"
    Use following link for downloading  Customer Master & Material master.
    http://help.sap.com/saphelp_crm20c/helpdata/en/4D/CFF837A9AAE651E10000009B38F8CF/frameset.htm
    http://help.sap.com/saphelp_crm20c/helpdata/en/67/bdcbe77d9611d396bd00a0c930e0da/content.htm
    Best Regards,
    Rajendra

  • Error "Invalid  project ID" while running the API - ADD_PROJECT_ASSET

    Dear All
    I am trying to run an API in PL-SQL developer, here out of the mandatory parameters P_PM_PRODUCT_CODE and PM_PROJECT_REFERENCE are null in my tables , hence i am passing the same to the procedure .
    The error I get is INVALID PROJECT ID when I passed some value like 'LEGACY SYSTEM for the P_PM_PRODUCT_CODE'. If I pass null for the same then I get INVALID PROJECT_ID

    PM_PRODUCT_CODE is look up in oracle Projct. If you are using value like 'LEGACY SYSTEM' make sure it is defined in the Lookup.
    which API are u using?
    Thanks
    Govind

  • CO-PA Delta load - Errors in source system RSM 340

    Hi,
    We are facing a unique error when we do a CO-PA delta load. The error message is as follows:
    "Errors in source system RSM 340,The selected data source is locked by another process RD 156"
    The load completes successfully with 0 delta records fetched. When we re - trigger this after sometime, the load goes through.
    Can anyone explain as to why this issue occurs ? Basically, looking at the root cause.
    We are pulling data from CE1XXXX table, the delta for which is pulled into BW with the setting of 30 minutes safety delta. Just wanted to understand how is it that in this scenario we are faced with a lock issue ? It is also confirmed that while the delta load is initiated the transactions are being passed into the CE1XXXX table.
    Thanks,
    Amit Mitra

    Hi PK,
    caller 09 error mainly because of source(target system) and destination(bw system) not configured correctly.
    i think you get the error message as follows. file is in the client workstation as like.
    better you contact basis people. they will resolve this.
    hope this help you
    Regards
    Harikrishna N

  • I am getting "Invalid Identifier" while running the below query

    Iam getting the error "Invalid Identifier, c_rank" while running the below query. Please help.
    select a.*, b.pog_description pog_description, b.start_date,
    row_number() over(partition by b.pog_description order by b.start_date) c_rank
    from temp_codi_dept_35 a, pog_master_msi b, pog_skus_msi c
    where a.sku = c.pog_sku
    and b.pog_id = c.pog_id
    and b.pog_dept = c.pog_dept
    and b.pog_number = c.pog_number
    and b.pog_level = c.pog_level
    and a.sku = 10263477
    and c_rank = 1;

    >
    Iam getting the error "Invalid Identifier, c_rank" while running the below query. Please help.
    select a.*, b.pog_description pog_description, b.start_date,
    row_number() over(partition by b.pog_description order by b.start_date) c_rank
    from temp_codi_dept_35 a, pog_master_msi b, pog_skus_msi c
    where a.sku = c.pog_sku
    and b.pog_id = c.pog_id
    and b.pog_dept = c.pog_dept
    and b.pog_number = c.pog_number
    and b.pog_level = c.pog_level
    and a.sku = 10263477
    and c_rank = 1;
    >
    You can't use 'c_rank' in the where clause because it doesn't exist; you are computing it in the SELECT clause.
    Remove the last condition and wrap your query in another one to select by 'c_rank'.

  • Error in code page mapping for Source system whil loading the data from ECC

    HI Gurus,
    I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
    In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
    Please let me know if there are any settings needs to be made.
    Many thanks in Advance
    Jagadeesh

    HI V,
    Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
    Do we need to do any settings in LBWE??
    Thanks and Regards
    Jagadeesh

  • Database Error while running the query.

    Hi,
    While running the query in webi rich client i am having a "database error IES 10901 and WIS 10901" , it is showing that the data source name not found and default driver is not specified.
    I am trying to generate report from efashion universe which is in .unx format, same client version and universe is running fine on another machine (webi rich client).
    PS: The above mentioned universe is running fine on my BI launch pad, the problem is with webi rich client only.
    Please help!!

    Hi,
    Which Database your are using .
    As explained by Yuvraj You need to install driver for specific database .
    Ask for client or (your Database ) driver from administrator .
    After installation you can see your database Driver in following path
    Control Panel\System and Security\Administrative Tools\Data Sources (ODBC)
    See in Drivers Tab .
    If you are using oracle & client is install on your system then Check TNS Names File in NETWORK folder .

Maybe you are looking for