Error in SPM (RFC Destination not been Maintained)

Hello,
I have created a request for Super user access of a Fire fighter ID: FF_Goods Receipt and it has been assigned to a fire fighter and when he tries to login it is giving me the error as "The Destiantion XXXX has not been maintained.
I have done the configuration related to SPM and assigned a RFC Destination in SPM Config.
Where we have to maintain the RFC destination in SPM?
Regards,
Kumar Rayudu

Hi Kumar.
Yes we need to create RFC connection for SPM (backend System)
Check for Post installation document
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90280209-1e57-2b10-009c-d8d800f626c5
Regards
Gangadhar
Edited by: gangadhar hm on Sep 4, 2009 12:04 PM

Similar Messages

RFC destination not defined for SAP global trade services

HI friends,
I have created a delivery against a sales order. Maintained the storage location and the picking quantity for the item.
Now trying to post the goods issue but system is giving short dump and error message says:
"RFC destination is not defined for SAP global trade services"
We are not using SAP global trade services module and no IDocs are involved in the process.
Please help
Thanks in advance
Veer

Hi Mohit,
Thank you for replying.
It was not an issue with RFC destination but to do with transfer of outbound delivery processes to SAP global trade services.
As we were not using global trade services, we had to deactivate the transfer of data from SD application to global trade services.
The settings are under IMG>SD>foreging trade>SAP global trade services-plug-in> control data transfer to SAP global trade services
Deactivate all the activities.
Now this issue has been resolved.
Thank you again for replying.
Regards
Veer

'MRP parameters for plant not been maintained'.

Dear Friends,
While creating Sub-contract PO (Item cat-L), system issued below error.
'MRP parameters for plant 9999 have not been maintained'
Message no. 61273
Please help how to rectify..
Regardsu2026. RAMAN

Hi
Check T.code OPPQ for your plant. If it is not maintained, maintain it after consulting with PP consultant.
Regards
Antony

Error Message "This Item has not been purchased"

I just bought a brand new computer with Windows 7 and I just downloaded Itunes. I couldn't remember my itunes password so I changed my password. After changing my password, I changed my Email address since I was using an old one I don't have access to anymore. After doing that I started trying to get my old purchases put on my new computer and maybe 40 songs downloaded before I got an error saying "This item has not been purchased with your Apple ID". These songs are listed in my purchased list, I bought them on my old computer and Itunes isn't letting me download nearly 300 songs that I paid for.
How do I fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Help! my windows PC with Vista will not dowload itunes 10.7. It gives me an error message: Your system has not been modified

Help! my windows PC with Vista will not dowload itunes 10.7. It gives me an error message: Your system has not been modified.I
I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone. Anyone facing the same issue or can point me in the right direction?

You may get better information on that error message by reposting in the iPhone forums:
iPhone
It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than just "G4" will get you help faster.

Getting error in XI"RFC Program Not Found"

Hi All,
I am getting error in SXMB_MONI "RFC Program not found via SAP XI".
So please suggest me what is the problem behind this..For these SAP XI and R/3 i made 3 to 4 RFC program but only 1 RFC program name not getting Via SAP XI.
Thanks
Amit

Hi,
I am calling RFC FM via SAP XI.
Main Records are coming from siebel and recevied by SAP XI and XI will do some changes in records and calling REC FM from SAP R/3.
Problem is siebel to xi records coming fine but xi to sap R/3 error message coming "Program not Found".
Thanks
Amit

Error message saying "iTunes has not been correctly localized for this language"

When trying to launch iTunes I'm getting an error message saying "iTunes has not been correctly localized for this language. Please run the English version"? Any suggestions are much appreciated and thank you in advance!

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

HELP - Receiving error message "The file has not been processed. An error has occurred which stopped the processing of the PDF"

Have been using Adobe CreatePDF for many months successfully.
Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
Tom.

I am still experiencing this problem. Customer service from Adobe has been abysmal!
I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
Note: This problem is happening always now, regardless of time being used.
Tom

Material in which Costing relevancy has not been maintained in routing

Hi,
I want list of materials for which Costing relevancy has not been maintained in routing process. Kindly let us know report/table name.
Regards....Kaushal Maheshwari

We need to list of all in-house material, so ca03 will not solve purpose & MAKL is structure table so we are not able to generate list of such items.
Regards.....Kaushal

Material in which Costing relevancy has not been maintained

Hi,
I want list of materials in which Costing relevancy has not been maintained. From where i can see it...in which table??
Thanks.

Dear,
Do Not Cost
    Controls whether a cost estimate or a procurement alternative can be
    created for a material.
Use
    If you select this indicator, you cannot create any of the following for
    this material:
    o   Material cost estimate (with or without quantity structure)
    o   Sales order cost estimate
    o   Procurement alternative
    The material is excluded from selection and BOM explosion, so that no
    cost component split will be created by the costing process. If the
    material is included in another cost estimate as a component to be
    valuated, the valuation price is determined through the valuation
    variant if no cost estimate with the same key exists for the material.
Regards,
Chintan Joshi.

Regarding "Error An SLD system has not been assigned to logical system "

Hi all,
I am trying to connect SRM system to an XI system. All the settings are done (or I thought so). When I try to send a PO via XML/XI to the XI system in SRM Web UI, it gives me the following error:
nformation Processing BBP_PO_SEND_XML Is Started
Error An SLD system has not been assigned to logical system
Error Action could not be successfully executed
The backend systems are defined in spro. When I debugged the coding, I find that the right Logical system itself is not picked up - is there any thing missed out?
Thanks,
Vijay

Hi,
You should assign this here:
Supplier Relationship Management -> SRM Server -> Technical Basic Settings -> Define Backend Systems.
Here you should fill the "System Landscape Directory Name" for the systems you have defined.
Regards
Kathirvel

TS4036 Error Message: This iPad hs not been backed up for 3 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi.

How do I clear up this Issue? Error Message: This iPad hs not been backed up for 3 weeks. Backups happen when the iPad is plugged in, locked and connected to Wi-Fi.
I plugged it in and it is charging now. It will not allow me to unlock it and when I push the 'ok' button for the error message, it still appears....will not go away.
Do I just allow it to charge and it will automatically backup itself? If not, what do I do?

Hold the power and home buttons at the same time until you see the Apple logo, then release. This will restart the phone and give you access again.
To troubleshoot your iCloud backup, try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again. If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

How we will know whether RFC destinations have been created for sender and

Hi,
How we will know whether RFC destinations have been created for sender and XI system.
Thanks,
dhanush.

Hi Dhanush,
you can check using the TCODE SM59.
Regards
Kenny

How to tackle the error - " The Lead Selection has not been set in view "?

Hi Guys,
I'm getting this error " The Lead Selection has not been set in view " . If any one has faced the same problem , then please guide me . I am new to WD ABAP so finding it difficult to track the reason.
TIA,
Vishesh

Hi Pradeep,
I have already checked "Initialisation Lead Selection" property . I have faced the same problem in another view also there it got solved by changing the cardinality. In this case, I had tried both cardinality and Lead selection property but nothing is working.
Thanx.

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

Error in SPM (RFC Destination not been Maintained)

Similar Messages

Maybe you are looking for