Error in SQL2000 attach DB

Dear All,
I have resrored datafiles production server e.g AP1DATA1,DATA2...DATA4 to a sandbox server. renamed them as AS1DATA1....DATA4. and now i wish to attach database to sandbox. but i am not able to attache it as below error is coming.
<b>Server: Msg 823, Level 24, State 2, Line 1
I/O error (bad page ID) detected during read at offset 0x00000f9a000000 in file 'E:\AS1DATA1\AS1DATA1.mdf'.</b>
Connection Broken
can you please advice. fast respose will be appriciated. Thanks in advance.
Regards,
Swapnil Lakhe

Dear
check the following link
File to File Part1
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
File to File Part 2
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
shailesh

Similar Messages

SQL Server 2008 R2 { An Error occured when attaching database(s) }

Hello Guys!
I just installed SQL Server 2008 R2 a couple of days ago, on the first day use i can attach database(.mdf) with out any problem.
on the day 2, i keep getting this error:
http://img515.imageshack.us/img515/14/1212i.png
TITLE: Microsoft SQL Server Management Studio
An error occurred when attaching the database(s). Click the hyperlink in the Message column for details.
BUTTONS:
OK
after clicking the Hyperlink this window open:
http://img34.imageshack.us/img34/8766/hyperg.png
TITLE: Microsoft SQL Server Management Studio
Attach database failed for Server 'STARGAZER-PC\SQLSTARMAX'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600.1+((KJ_RTM).100402-1539+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Unable to open the physical file "E:\New folder\DataBase.MDF". Operating system error 5: "5(Access is denied.)". (Microsoft SQL Server, Error: 5120)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1600&EvtSrc=MSSQLServer&EvtID=5120&LinkId=20476
BUTTONS:
OK
in that day i reinstall SQL Server 2008 R2, because I'm so confused. after that i try to attach i still got the same error, what i did is i share the folder where the database is.
i open SSMS and try to attach and i attached without any error...
i think this is the 4rth day, untill now everytime i want to attach a database i got this error, and even i try to share the folder where the database is i still got that error.
any advice guys?
Thanks a lot
jhules
if you want to be happy, find something you love to do and do it for free, then find someone to to you for it.

The Error clearly shows that MDF files and LDF files are not matching or LDF file is corrupted.
You can follow either of the one option below
1. Restore a recent backup rather attaching the MDF file
2. Attach single MDF file without LOG File( Warning: All the log transactions will be gone and new log file will be created)
EXEC sp_attach_single_file_db @dbname = 'AdventureWorks2008R2',
@physname = N'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Data\AdventureWorks2008R2_Data.mdf';
Thanks, Aditya Badramraju, _______________________________________________________ Please mark answered if your question is completely answered; vote it as helpful to help others find a solution quicker. This posting is provided AS IS with no warranties
and confers no rights. _______________________________________________________

Formatting error in email attachment

Hi experts,
I have encountered a problem regarding formatting errors of the attached file.
the attached error file contains
[ S y s t e m ]
N a m e = I D E
D e s c r i p t i o n = I D E S M a n i l a
C l i e n t = 2 5 1
[ U s e r ]
N a m e =
[ F u n c t i o n ]
T i t l e = A B A P r u n t i m e e r r o r s
C o m m a n d = S T 2 2
but in the contents_bin table
[System]
Name=IDE
Description=IDES Manila
Client=251
[User]
Name=
[Function]
Title=ABAP runtime errors
Command=ST22
as you can see there were no spaces between the letters in the table but in the output there are spaces have been generated.
Please help me with this problem. i need no generate a file the same as what i placed in the table..
points will be rewarded if successful
Edited by: Durairaj Athavan Raja on Jun 22, 2008 10:07 AM

do not post duplicate threads. i have deleted the other one. and
points will be rewarded if successful
the SDN angels dont answer just for points. if you find a answer userful, its your duty to award points to say thanks. dont use that as a mean to woo users.
Regards
Raja

Javascript errors while adding attachment to list on ribbon sp 2013

Hi All,
Javascript errors while adding attachment to list sp 2013
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; .NET4.0C; .NET4.0E; InfoPath.3)
Timestamp: Mon, 20 Oct 2014 09:49:13 UTC
Message: Object required
Line: 1
Char: 122565
Code: 0
URI:
https://server.com/_layouts/15/form.js?rev=PxBF2F2E04Ut1YUooXDAbg%3D%3D
Screen become blank and nothing is dosplayed when attach item is clicked for custom list
Ravi

Hi Ravi,
According to your description, my understanding is that you encountered the error "Object required" when you try to add attachment to list in SharePoint 2013.
For your issue, you can refer to the blog:
http://kiran-kakanur.blogspot.com/2010/02/how-to-resolve-object-required-error-in.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

Error encountered while attaching a document in an appraisal

Hi Experts,
Good day. I have enabled or allowed an attachment to be included in an appraisal but I am getting this error while attaching a document "Read error during PC upload (header of the pop-up box), Include file in PC application Try Again? Yes / No / Cancel (message contents)". Any inputs as to why I got this error? I also checked table T77S0 for GENER/OBJSV and it shows with the value of 1 meaning it is activated, right? One more thing, do you also have an idea as to why I am getting this warning message for the description of the appraisal template: "You have maintained a description that is not displayed." It allows me save but I just want to know why this happens and what do I need to do for it not to appear because the client may get back to me and ask the same thing. Any inputs will be greatly appreciated. Please help.
Thanks in advance,
Arvin

did you install jacob ? with the correct version number described in the installation-guides.
jacob is not an oracle tool, which normally is only useful for COM-commands against windows.
What did you do with the image?

Access share on NSS4000 with error: A device attached to the system is not functioning

Hello,
We use Acronis True Image Server to backup 4 Windows 2008 Standard Server system
with 2 different domains, each containing a DC and a RDP-Server.
After Server reboot, backup will run only once a day.
The next day backup aborts, and while trying to access
the network share like \\ip-address\share, as configured in Acronis
I get the error message: A device attached to the system is not functioning.
On the other hand, I can ping the NSS4000 and access share by using the
network (netbios) name instead of the ip.
This will work only for one day, also.
Now, if I try to access the share on the NSS4000 again by ip,
I get the error code 0x80070043 The networkname can not be found.
Ping on ip and netbiosname works.
Share access from one server to an other is not affected and full funtional at all times.
On the first sight I thought, that there it might be with the authentication protocol NTLMV2.
So I configured the GP to send only NTLM Authentication only, without fixing the problem.
Fyi:
I use a NSS4000, Firmware version 1.16-3
The NSS4000 is not a member in neither domains.
I created a dummy user account on each domain, an created a local user on the NSS4000 related
to the dummy user account on each domain.
A good answer helping me to fix with this issue, would be great.

I am constantly seeing this error at multiple sites on Windows Server 2012 and 2012 R2 Standard and DataCenter.
I have counted over 50 different server I manage with services such as domain controller, hyper-v, file servers, exchange 2013, SQL 2008/2012, and print servers.
I have seen it happen on machine that have been in production for over 2 years and to machines that were just created last week.
It is happening on metal, hyper-v and esx vmware servers.
It is happening when the machine have updates waiting or no updates, or after updates have been applied and awaiting a restart.
It is happening on Dell PowerEdge server, HP Proliant servers and IBM servers.
It is happening on servers with Intel and AMD chip-sets.
It is happening on machines that are a part of a domain or in a workgroup.
It is happening on machines with AV of Bitdefendor, Trend Micro, Vipre, Microsoft Endpoint, and Symantec Endpoint.
Only a restart will fix it.
I have ran process monitor on several of the problem machines and I cannot find anything.
Since I have only started seeing this about 6 month ago it must be a Windows update causing it.
Moses Hull of Alexant Systems

Error message while attaching file to email

When attempting to attach a file to an email, I got the following error message: an error occured while sending mail.
Adobe Reader 8.12
Windows XP
thanks,

In order to attach a file in an email - the app it self must support it. For instance, you can email a Photo in the Photos app by selecting the photo that you want to email and then tap the curved arrow icon in the upper right corner and select the email option.
Apple's Pages for the iPad allows you to email files as well - but you have to do it from the Pages App itself. Other apps also support the feature but as Meg explained, you can't attach a file in web mail - at least I haven't seen how to do it.

HTTP 500 Internal Server Error with Large Attachment in SOAP Scenario

Hi,
we have implemented SOAP - XI - SOAP Scenario in our landscape (Sap Neatweaver Process Integration 7.1) .
One of the functionality of this scenario is the Upload of Documents to External Web Service through standard SOAP Attachment.
If we try to upload a small file (smaller than 20MB), task works fine and the document is correctly uploaded.
If we try to upload a larger file, we encountered in this generic error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1161)
We tried to increase timeout parameters (in communication channel and in ICM Value) but the response is the same.
We verify also if icm/HTTP/max_request_size_KB parameter was set to a value smaller than our file size limit (20MB) but is set to default value (100MB).
The problem isn't on External Web Service Layer because if we try to upload the same documents directly to that web service upload works fine, and in External Web Service's Log there aren''t any indications of this error.
So I ask you: are there any System Parameters to verify to solve this issue?
For additional, in ICM Monitor LOG we can read this WARNING when we call our service:
WARNING => IcmReadFromConn(id=53/454390): temporarily out of MPI buffers -> roll out [icxxthrio_mt 2646]
This warning may be related to the problem? If yes, how can we solve it?
Thanks a lot,
Marcello Ricci

Hi ,
Please answer my following questiosn.
1) which PI version are you using?
2) How many J2EE nodes you have.
please be reminded that SOAP is not for the heavy messages. Then you need to increase your timeout parameters from BASIS.
Rgds
Veeru
Edited by: viru srivastava on Dec 14, 2010 10:18 PM

Error when running attached menu to form

I have recently attached a menu to a form. It worked the first
time, but not I just get the error :
"form-10221: Cannot read file <menu filename>"
I have recompiled "This section" as well as "compile all".
According Oracle help, I should just recompile the application
library.
Any ideas ?
Bob Mazzo
[email protected]

Hi,
You have to put your menu where oracle can find it.
Check where it goes in the regedit/ formXX_path
add a new path or place your menu in the default oracle path.
by default it is supposed to find it if it is in the same folder
but not every time...
another solution create a shortcut and put all you need to run
the form in a single folder and mark this folder in the start in
box of your shortcut.
I hope this help you.
Sorry for my english!
Bye Roxane

Error while opening Attachment(ZIP files) in work-flow inbox(Portal)

Hi Experts ,
We are getting error , when we try to open the Attachement (ZIP file) link from workflow-inbox(portal side). We are able to open the attachment sucessfully from backend . But we are getting error"Internet Explorer cannot download from void (0).No such interface supported.u201D when we try to open the attachment from portal.The attachment is ZIP file.
Please help us to resolve the error.
Edited by: AlokSBP on Apr 16, 2010 10:46 AM
Edited by: AlokSBP on Apr 16, 2010 10:49 AM

Thanks for the response...
The issue is only occurring for the ZIP file extention . we are able to open the document in other files extentions from UWL inbox(portal).
We have checked few more threads in SDN & got some link mentiioing the Tcode :- DC20 and DC30 (related to file extension) . As explained in the Tcode DC20 and DC30 . the file extention entries has to be maintained.
We have made the entry of ZIP file in the DC20 & DC30 but still we are getting the same error. I think we are missing some entries to fill.
It would be great if you can suggest regarding this issue...
Is this is the cause of the issue ?
Appreciate your help.....
Cheers:)
Edited by: AlokSBP on May 3, 2010 12:40 PM

Error when opening attachment in DRL Document

Hello all,
I am working on giving read access to DRL for a specific group of people. I have been able to allow them to see the entire taxonomy of the DRL. When they try to access the attachment in the document they get an error message.
Any suggestions or is this a SR? This has never been an issue for us in the past.
Thanks,
Dana

Ron,
This is what we got. Thanks for your help.
Event Type:        Error
Event Source:    DRL-Prodika
Event Category:                None
Event ID:              0
Date:                     8/26/2013
Time:                     3:18:24 PM
User:                     N/A
Computer:          PROPHECYTEST
Description:
Current User: tarav
URL: "/drl/WebCommon/Popups/DRL/DrlAttachmentViewerPopup.aspx"
Additional Info:
System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.NullReferenceException: Object reference not set to an instance of an object.
   at Xeno.Prodika.DRL.WebUI.Integration.DrlServiceImpl.GetAttachmentWithBlob(tIdentifier AttachmentId, Byte[]& AttachedBlob)
   --- End of inner exception stack trace ---
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Xeno.Prodika.XenoDoc.Handlers.DRL.DrlService.GetAttachmentWithBlob(tIdentifier AttachmentId, Byte[]& AttachedBlob)
   at Xeno.Prodika.XenoDoc.Handlers.DRL.DrlWebServiceBlobHandler.LoadBlob(IXDocument xdoc, Stream readableBlobStream)
   at Xeno.Prodika.XenoDoc.BaseLibraryManager.LoadBlob(IXDocument xdoc, Stream readableBlobStream)
   at Xeno.Prodika.XenoDoc.DRL.WSBasedDrlAttachmentDocument.GetBlobAsStream()
   at Xeno.Web.UI.Common.Controls.Popups.DRL.DrlAttachmentViewerPopup.OpenAttachment(IDrlAttachmentDocument xdoc)
   at Xeno.Web.UI.Common.Controls.Popups.DRL.DrlAttachmentViewerPopup.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   --- End of inner exception stack trace ---
   at System.Web.UI.Page.HandleError(Exception e)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
   at System.Web.UI.Page.ProcessRequest()
   at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
   at System.Web.UI.Page.ProcessRequest(HttpContext context)
   at ASP.webcommon_popups_drl_drlattachmentviewerpopup_aspx.ProcessRequest(HttpContext context) in c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\drl\393ae15b\c0ee4519\App_Web_zaulqnop.1.cs:line 0
   at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Missing required input property error in insert attachment

Hi,
Im getting this following error some times not all times when i tring to insert attachment files to campaign object
<ErrorMessage>Missing required input property "Handle"(SBL-ODS-00242)</ErrorMessage>
please give some solution
Thanks,
Sathis Kumar P

Do you have the XML request that you are sending?

Error in Displaying Attachment

Hi All,
In Production client, Attaching originals to DIR, checking in to content server, saving of DIR is possible but when DIR is opened in change/Display mode, opening Attachment in display mode is giving the following error,
File C:\TEMP\_TEST02.doc cannot be opened
Thank You,
Manoj

Hi Manoj,
I think this error can be resolved, it might be the case of The content server in which you are trying to load the document is not Upright or not working at this point of time, check to upload some document through cv01n if this works fine, then
it might be the case there is lac of Authorization in Opening the file, or the file Path where it is trying to store is not Accessible.
Award point for usefull answers,
Cheers and Regards
Kumar S

Error in PDF attachment send by SO_DOCUMENT_SEND_API1

Hello,
I need to send an email with PDF attachment. The PDF file is stored on SAP server.
I use READ DATASET FOR INPUT IN BINARY MODE in order to get PDF content.
I fill a table T_DATA with content (T_DATA : STANDARD TABLE OF XSTRING)   => T_DATA contains only 1 line.
Then I convert XSTRING in BINARY with function SCMS_XSTRING_TO_BINARY => fill T_DATA_CHAR (type table of solisti1)
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
            EXPORTING
              buffer                = s_data        => first LINE of T_DATA
           IMPORTING
             output_length         = w_output_length
            TABLES
              binary_tab            = t_data_char.
I fill tables for 'SO_DOCUMENT_SEND_API1'.
APPEND LINES OF t_data_char TO t_contents_bin.
            s_packing_list-transf_bin = 'X'.
            s_packing_list-head_start = 1.
            s_packing_list-head_num   = w_cpt.
            s_packing_list-body_start = 1.
            DESCRIBE TABLE t_data_char LINES s_packing_list-body_num.
            s_packing_list-doc_type   = 'PDF'.
            s_packing_list-doc_size = w_output_length.
            APPEND s_packing_list TO t_packing_list.
The mail is well created but i can't open the PDF attachment because I have the message "There was error in opening. File damaged & could not be repaired".
What can I do ?
Thanks.

Complete code :
*       Title
        CLEAR w_document_data.
        CONCATENATE text-001 i_belnr
        INTO w_document_data-obj_descr
        SEPARATED BY space.
        w_document_data-sensitivty = 'F'.
        w_document_data-obj_langu = sy-langu.
        w_document_data-no_change = 'X' .
        w_document_data-expiry_dat = sy-datum + 30.
*       Mail content
        CLEAR s_packing_list.
        s_packing_list-transf_bin = space.
        s_packing_list-head_start = 1.
        s_packing_list-head_num = 0.
        s_packing_list-body_start = 1.
        DESCRIBE TABLE t_corps_mail LINES s_packing_list-body_num.
        s_packing_list-doc_type = 'RAW'.
        APPEND s_packing_list TO    t_packing_list
OPEN DATASET w_path
                FOR INPUT
                IN BINARY MODE
                MESSAGE msg.
          IF sy-subrc = 0.
    DO.
              CLEAR s_data.
              READ DATASET w_path INTO s_data.
              IF sy-subrc <> 0.
                EXIT.
              ENDIF.
              APPEND s_data TO t_data.
            ENDDO.
          ENDIF.
          CLOSE DATASET w_path.
        READ TABLE t_data INTO s_data INDEX 1.
        DATA : w_output_length TYPE i.
          CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
            EXPORTING
              buffer                = s_data
           IMPORTING
             output_length         = w_output_length
            TABLES
              binary_tab            = t_data_char
          IF sy-subrc = 0.
            APPEND LINES OF t_data_char TO t_contents_bin.
            s_packing_list-transf_bin = 'X'.
            s_packing_list-head_start = 1.
            s_packing_list-head_num   = 1.
            s_packing_list-body_start = 1.
            DESCRIBE TABLE t_data_char
            LINES s_packing_list-body_num.
            s_packing_list-doc_type   = k_type_pdf.
            s_packing_list-obj_name = 'NAME'.
           s_packing_list-obj_descr = 'DESC'.
           s_packing_list-doc_size = w_output_length.
          APPEND s_packing_list TO t_packing_list.
        CLEAR s_receivers.
        s_receivers-receiver = w_receiver.
        s_receivers-rec_type = 'U'.
        APPEND s_receivers TO t_receivers.
        CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = w_document_data
          sender_address            = w_sender
          put_in_outbox              = 'X'
          commit_work                = 'X'
        TABLES
          packing_list               = t_packing_list
          contents_bin               = t_contents_bin
          contents_txt               = t_corps_mail
          receivers                  = t_receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          OTHERS                     = 8.
if sy-subrc = 0.
endif.
Edited by: Laure VERE on Nov 3, 2009 11:22 AM
Edited by: Laure VERE on Nov 3, 2009 11:22 AM

Error in CSV attachment

hello everybody,
I need to send an attachment with the format csv. I have the internal table for attachment (declared like solisti1), and when I show the records in the table, are without spaces. Imagine that the file have 2 records.
When I receive the email, I show with the notepad the file, and I have one line separated with ";", and it filled with spaces until 255 characters (the length of my record is 79).
And I must have in the file, two lines without spaces. I test with a CR at the end, but not work.
If I change to txt, all work well, but the extension of the attachment is txt, and must be csv.
Thanks.
Paloma

Hi Manoj,
I think this error can be resolved, it might be the case of The content server in which you are trying to load the document is not Upright or not working at this point of time, check to upload some document through cv01n if this works fine, then
it might be the case there is lac of Authorization in Opening the file, or the file Path where it is trying to store is not Accessible.
Award point for usefull answers,
Cheers and Regards
Kumar S

Error in SQL2000 attach DB

Similar Messages

Maybe you are looking for