Error in synchronous proxy to soap

Hi Experts,
I am doing synchronus proxy to synchronous soap
I am gettin the below error while i am testing.
java stack(RWB)
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: ErrorCode:104 - updatePerson operation failed: Failed to create context: [LDAP: error code 32 - No Such Object]
exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION -
- updatePerson operation failed: Failed to create context: [LDAP: error code 32 - No Such Object]
19.05.2011 05:30:58 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: ErrorCode:104 - updatePerson operation failed: Failed to create context: [LDAP: error code 32 - No Such Object]
Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
104 - updatePerson operation failed: Failed to create context: [LDAP: error code 32 - No Such Object]. Setting message to status failed.
ABAP STACK(MONI)
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: ErrorCode:104 - updatePerson operation failed: Failed to create context: [LDAP: error code 32 - No Such Object]</SAP:AdditionalText>
Kindly help the same
Edited by: eltonsaranya on May 19, 2011 8:56 AM

ErrorCode:104 - updatePerson operation failed: Failed to create context: LDAP: error code 32 - No Such Object</
It seems that you are trying to call an updatePerson operation through the WSDL and the call is failing at this stage.
Can you check if the request send by PI is correct in structure and that the WSDL is not facing any issue (check with the end system developer).

Similar Messages

  • Error in SOAP receiver channel in Synchronous Proxy to SOAP scenario

    Hi all,
    We are experiencing an issue with a synchronous Proxy to SOAP scenario. Getting below error message in the SOAP receiver communication channel for the response message.
    SOAP: Response message contains an errorXIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
    Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: com.sap.aii.utilxi.misc.api.ResourceException: Could not determine mapping steps for message 1364b76e-ecbf-11e4-85f4-000023acfde6.
    We are running PI 7.4.
    Any help is appreciated.
    Thanks,
    Pushpa

    Hi,
    Seems the Receiver Webservice is not reachable. Did you try to test it using SOAP UI tool.
    1. Test a fresh message from local SOAP UI tool.
    2. Pick 3rd party WSDL file and Import in SOAP UI tool.
    3. Put some dummy data for mandatory fields
    4. Trigger it msg and ckh if you get successful / response msg.
    5. Check if firewall is open and that URL is not blocked.
    Hope it helps
    Regards,
    Azhar

  • Synchronous Proxy to Soap  "MESSAGE" GENERAL /

    Hi,
    I try to use the SOAP HTTP (Axis)  Adapter in a PI 7.1 EHP 1 to consume a web service (soap version 1.2). Itu2019s a third-party web service. when I initiate the request  Iu2019m getting the following error.
    <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
           <SAP:P1 />
           <SAP:P2 />
           <SAP:P3 />
           <SAP:P4 />
           <SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: The SOAP action specified on the message, '', does not match the HTTP SOAP Action, ' https://webservices.123456.com/Services/Versions1/DocServ/SearchDoc'.</SAP:AdditionalText>
    If I test the web service with soapUI, I use the WS-A parameters u201EActionu201C and u201ETou201C and add the WS-A header to the request and it works.
    Excerpt from soapUI:
    <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:ver="https://webservices.123456.com/Services/Versions1/" xmlns:arr="http://schemas.microsoft.com/2003/10/Serialization/Arrays">
       <soap:Header xmlns:wsa="http://www.w3.org/2005/08/addressing"><wsa:Action soap:mustUnderstand="1">https://webservices.123456.com/Services/Versions1/DocServ/SearchDoc</wsa:Action><wsa:To soap:mustUnderstand="1">https://webservices.123456.com/Services/Versions1/DocServ.svc</wsa:To></soap:Header>
    u2026.
    But without these header informations, I get the same error message like the PI-error.
    My question is, what do I have to do in the PI to make it work?
    Iu2019m setting the parameter SOAP Action in the PI with the same value as soapUI. The Target URL in the PI is https://webservices.123456.com/Services/Versions1/DocServ.svc.
    Can you help me please?
    Thank you.
    Beatrice

    ErrorCode:104 - updatePerson operation failed: Failed to create context: LDAP: error code 32 - No Such Object</
    It seems that you are trying to call an updatePerson operation through the WSDL and the call is failing at this stage.
    Can you check if the request send by PI is correct in structure and that the WSDL is not facing any issue (check with the end system developer).

  • HTTP 401 Unauthorized, error in proxy to SOAP Scenario

    Hi all,
    We got the below error in our proxy to SOAP Scenario.
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized
    We configured User Authentication,Proxy and Proxy User Authentication for the Receiver Communication Channel correctly still we are getting this error.
    So please let me know what could be the possible reasons behind it and how to resolve it.
    Waiting for your valuable response.

    Hi,
    Consider the parameters connection pool size and connection wait time:
    ume.r3.connection.master.poolmaxsize
    ume.r3.connection.master.poolmaxwait
    These parameters are described in the note below:
    #821026 - AdapterEngine messaging URL returns HTTP 401 under high load
    Also, ensure you have maintained the correct password, which MUST be the same, for all the service users
    on XI. You may check all the places it should be maintained, such as Exchange Profile, SU01, SLDAPICUST, etc..
    Please kindly check the note below:
    PI 7.1:
    #999962 - PI 7.10: Change passwords of PI service users
    XI 7.0
    #936093 - XI 7.0: Changing the passwords of XI service users
    XI 3.0
    #721548 - XI 3.0: Changing the passwords of the XI service users
    And ensure that the user has the correct role as per link below:
    http://help.sap.com/saphelp_nwpi71/helpdata/en/9f/d12940cbf2195de10000000a1550b0/frameset.htm
    Regards,
    Caio Cagnani

  • Error in Proxy to SOAP synchronous scenario

    Hi Gurus,
    Hope you are doing well. I have a Proxy to SOAP synchronous interface interacting with an external system (system outside the firewall/landscape of my company).
    When I am trying to post the request message from XI, I am getting the following error.
    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The server was unable to process the request due to an internal error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs
    In the WSDL provided by the external application, i.e. receiver WSDL, there is no attribute/field with the name 'IncludeExceptionDetailInFaults' and there is no fault string defined.
    Where is this error being thrown up? Is it a network/firewall error that XI is unable to determine?
    Please provide an answer as soon as possible.
    regards
    Debansu

    Hi,
    i think it is the problem in the WSDL provider system, because it is throwing the Error with some string".NET",
    do the below steps for investigating the issue
    1)try pinging the URL provided in the WSDL from internet explorer.
    2)if it is successfull, try to push one message from SOAP UI to by importing that WSDL, if you get any error then it is problem in the end system.
    Thank You,
    Madhav

  • Error in synchronous( abap proxy to soap)scenario

    Hi experts,
    My scenario is synchronous abap proxy to sysnchronous soap. for proxy I am using business system name as ERDCLNT220 and soap business system name as BS_HRS_DEV
    configuration steps are
    1. only client proxy to soap scenario I have done.
    communication channels: only receiver soap adapter. no proxy sender communication channel for client proxy.
    Already we have RFC destination connection and connection type H for proxy to xi.
    1.Is it required RFC destination connection for xi to server proxy.
    2.Is it required receiver proxy communication channel for server proxy?.
    i HAVE TESTED THIS INTERFACE. I am able to send the request. But I am not able to receive the response from soap webservice message .
    error is:
    SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson. Setting message to status failed.
    Kindly help me.
    advance thanks
    thanks and regards
    elton
    Edited by: eltonsaranya on May 9, 2011 10:27 AM

    Your exception message shows problem at the webservice side.
    Check the following:
    a) you need two mappings one for proxy req to soap request and other soap response to proxy response
    b) You need to create service interfaces both sender and receiver synchronous .
    c) communication channel  QOS is best effort for both sender and receiver
    d) I dont see problem in soap configuration. Bcuz you are able to ping and while getting response from the method getPerson it fails.
    f) See your SOAP response structure matches with WSDL provided.
    g) You can also test outside PI.. I meant testing via soap client tool like SOAPUI  for that web service. So that you know whether problem exists on the target system or not.
    Hope that helps.

  • Synchronous Proxy - SOAP Scenario (Error 500 in Response).

    Hi
    I've built a few Synchronous Proxy -> SOAP Scenarios,
    with 'Do Not Use SOAP Envelope' option.
    For two of them, I'm facing a common error.
    The error is: ADAPTER.HTTP_EXCEPTION (HTTP 500 Internal Server Error).
    When I paste the EXACTLY SAME payload picked up from XI, into the SOAP client, it works giving valid response.
    Trying to figure out the issue.
    R/3 System:
    WAS 620 (Level 0041)
    XI System:
    PI 7.0 (Level 0007)
    SOAP System:
    BizRights (Approva) 3.0
    Any help is appreciated.
    Rajendra.

    Hi,
    Following SAP notes may help you-  804124, 807000
    Regards,
    Moorthy

  • System Error in Message Monitoring -Proxy to SOAP async scenario

    Hi All,
    My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
    In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
    but in related Soap Receiver communication channel i can see the below Error 
    "2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
    2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
    2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
    2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
    2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
    Please help , what could be the problem.
    Thanks in Advance.
    Jyoti

    Hi Jyoti,
    >Is there any specific setup required at Provide side while moving to Acceptance system
    I dont think so.
    Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
    Regards,
    Udo

  • Error while invoking the ABAP Proxy via SOAP Adapter

    Hi,
    My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
    SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
    Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
    SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
    With this approach, i am encountering the below error message
    2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    Any ideas on the above errror message? Any pointers or inputs will be appreciated.
    Thanks,
    Vinayak Kamath

    > 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    > 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    This is a generic error message which does not have any information about the error which has occurred.
    Do you see any error messages in the SOAP client?
    Regards
    Stefan

  • PROXY to SOAP ; HTTP403 error in PI 7.1

    Hi team,
    it was proxy to HTTP scenario. Receiver : webportal . We have chnged it to Proxy to SOAP ,due to HTTP does not support multi message generation . I have checked Do NOT USE SOAP Envelope in SOAP rcv channel. Pls find the config details.
    Adapter Type: SOAP
    Trans.protocal: HTTP
    Mess.Protocal: SOAP1.1
    Do not use SOAP envelope : Checked
    Now Im getting error in RWB .
    "Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 403 Access denied"
    I checked with the basis people- they confirmed - some request hitting the site. but unable to read the content . they specified HTTP header should contain the content type : text/xml . If I checked "Do not use SOAP envelope " , I guess the content type is application/xml etc.
    so how can I change the HTTP content type to text/xml. OR any other reason tfor this error.
    thnaks
    Drumi.

    Hello,
    I checked with the basis people- they confirmed - some request hitting the site. but unable to read the content . they specified HTTP header should contain the content type : text/xml . If I checked "Do not use SOAP envelope " , I guess the content type is application/xml etc.
    so how can I change the HTTP content type to text/xml. OR any other reason tfor this error.
    The content type when Do Not Use SOAP Envelope is checked defaults to application/xml. To change it to the correct content type, use the MessageTransformBean for your requirement.
    ProcessingSequence                         ModuleName           Type     ModuleKey
    1          localejbs/AF_Modules/MessageTransformBean            LEB      0
    2          sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean LEB      soap
    Module Configuration
    ModuleKey                ParameterName                ParameterValue
    0                      Transform.ContentType          text/xml
    For more info, see http://help.sap.com/saphelp_nwpi711/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
    Check also if you are passing credentials in your Receiver.
    Hope this helps
    Mark

  • ABAP-Proxy to SOAP: Error in SOAP Adapter

    Hi!
    I would like to implement ABAP-Proxy to SOAP scenario.
    Unfortunately my SOAP receiver channnel has the following error:
    SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No SOAP Envelope but 1 definitions; HTTP 200 OK: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Furthermore the call of  /sap/bc/soap/rfc of business system B is erroneous
    http://<server system B>:8000/sap/bc/soap/rfc
    Here I get the error: HTTP 500 Internal Server error
    Can some one help me to solve this problem?
    Thank you very much!
    regards
    Holger

    Hi,
    Are you using the webservice exposed by SAP or it is third party webservice. Can you explain your complete scenario? What is the url you have given in your receiver SOAP Channel? Was that no configured earlier?
    If at all you are using the SAP webservice, the wsdl link should be.
    http://<server>:<http port>/sap/bc/soap/wsdl11?services=BAPI_MATERIAL_EXISTENCECHECK&sap-client=200
    The target url you will be able to see in the wsdl itself also
    amit

  • Error "soap fault: No operation available for request" in proxy to soap Scenario

    Hi Experts,
    Unable to trace the below error when pushing the message from RWB while testing the PROXY to SOAP interface
      Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: No operation available for request {http://schemas.xmlsoap.org/soap/envelope/}Envelope.
    Thank you very much if any one provided the solution
    Regards,
    Yugandhar 

    Hi Yugandhar,
    Check the below thread,
    Connecting from SAP PI To Salesforce
    Regards
    RK N.

  • Problem Proxy to SOAP Synchronous

    Hi Experts, I was looking for a solution to this problem, but I could not find the solution, I hope you can help me.
    I have the scenario PROXY ==> PI ==> SOAP (Synchronus).
    When the Web Service is ok, I have no problems, my problem is with the Fault Exception, because I tested it in SoapUI, and I'm getting this message.
    <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
       <S:Body>
          <S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope">
             <faultcode>S:Server</faultcode>
             <faultstring>Error al insertar Domicilio en servicio Empleado</faultstring>
             <detail>
                <FaultException:FaultException xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.interacciones.com.mx/ServicioEmpleado/" xmlns:FaultException="http://www.interacciones.com.mx/ServicioEmpleado/"/>
                <ns2:exception class="mx.com.interacciones.servicioEmpleado.FaultException_Exception" note="To disable this feature, set com.sun.xml.ws.fault.SOAPFaultBuilder.disableCaptureStackTrace system property to false" xmlns:ns2="http://jax-ws.dev.java.net/">
                   <message>Error al insertar Domicilio en servicio Empleado</message>
                   <ns2:stackTrace>
                      <ns2:frame class="mx.com.interacciones.servicioEmpleado.ServicioEmpleadoImpl" file="ServicioEmpleadoImpl.java" line="87" method="agregarEmpleado"/>
                      <ns2:frame class="sun.reflect.GeneratedMethodAccessor267" line="unknown" method="invoke"/>
                      <ns2:frame class="sun.reflect.DelegatingMethodAccessorImpl" file="DelegatingMethodAccessorImpl.java" line="25" method="invoke"/>
                      <ns2:frame class="java.lang.reflect.Method" file="Method.java" line="597" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="101" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="83" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.InvokerTube$2" file="InvokerTube.java" line="152" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.EndpointMethodHandler" file="EndpointMethodHandler.java" line="264" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.SEIInvokerTube" file="SEIInvokerTube.java" line="93" method="processRequest"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="604" method="__doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="563" method="_doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="548" method="doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="445" method="runSync"/>
                      <ns2:frame class="com.sun.xml.ws.server.WSEndpointImpl$2" file="WSEndpointImpl.java" line="275" method="process"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit" file="HttpAdapter.java" line="454" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter" file="HttpAdapter.java" line="250" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.servlet.ServletAdapter" file="ServletAdapter.java" line="140" method="handle"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke" file="HttpServletAdapter.java" line="319" method="run"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter" file="HttpServletAdapter.java" line="232" method="post"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="310" method="doPost"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="727" method="service"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="87" method="service"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="820" method="service"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction" file="StubSecurityHelper.java" line="227" method="run"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper" file="StubSecurityHelper.java" line="125" method="invokeServlet"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="292" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="175" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction" file="WebAppServletContext.java" line="3594" method="run"/>
                      <ns2:frame class="weblogic.security.acl.internal.AuthenticatedSubject" file="AuthenticatedSubject.java" line="321" method="doAs"/>
                      <ns2:frame class="weblogic.security.service.SecurityManager" file="SecurityManager.java" line="121" method="runAs"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2202" method="securedExecute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2108" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletRequestImpl" file="ServletRequestImpl.java" line="1432" method="run"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="201" method="execute"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="173" method="run"/>
                   </ns2:stackTrace>
                </ns2:exception>
             </detail>
          </S:Fault>
       </S:Body>
    </S:Envelope>
    So, I was reading a lot of threads, those said to copy the structure, but it doest not work.
    I tried to check the "Do Not Use SOAP Envolve", but when I did that I got this error.
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type
    When I unchecked I got this error.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_MM_RecursosHumanos_ServicioEmplead~</SAP:P1>
      <SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
      <SAP:P3>on: Cannot create target element /ns0:Fault. Value</SAP:P3>
      <SAP:P4>s missing in queue context. Target XSD requires a~</SAP:P4>
      <SAP:AdditionalText />
      <SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_RecursosHumanos_ServicioEmplead~; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:Fault. Values missing in queue context. Target XSD requires a~</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    I could never see the Fault Structure in PI and neither in Web Service Navigator.
    Please, I need some help.
    Thank you very much.
    Regards

    If I test it in Soap UI I get the Fault, and in WsNavigator I can see the FaultCode and FaultString as a message on the top of the page.
    I do not know what more to do.
    <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
       <S:Body>
          <S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope">
             <faultcode>S:Server</faultcode>
             <faultstring>Error al insertar Domicilio en servicio Empleado</faultstring>
             <detail>
                <FaultException:FaultException xsi:nil="true" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.interacciones.com.mx/ServicioEmpleado/" xmlns:FaultException="http://www.interacciones.com.mx/ServicioEmpleado/"/>
                <ns2:exception class="mx.com.interacciones.servicioEmpleado.FaultException_Exception" note="To disable this feature, set com.sun.xml.ws.fault.SOAPFaultBuilder.disableCaptureStackTrace system property to false" xmlns:ns2="http://jax-ws.dev.java.net/">
                   <message>Error al insertar Domicilio en servicio Empleado</message>
                   <ns2:stackTrace>
                      <ns2:frame class="mx.com.interacciones.servicioEmpleado.ServicioEmpleadoImpl" file="ServicioEmpleadoImpl.java" line="87" method="agregarEmpleado"/>
                      <ns2:frame class="sun.reflect.NativeMethodAccessorImpl" file="NativeMethodAccessorImpl.java" line="native" method="invoke0"/>
                      <ns2:frame class="sun.reflect.NativeMethodAccessorImpl" file="NativeMethodAccessorImpl.java" line="39" method="invoke"/>
                      <ns2:frame class="sun.reflect.DelegatingMethodAccessorImpl" file="DelegatingMethodAccessorImpl.java" line="25" method="invoke"/>
                      <ns2:frame class="java.lang.reflect.Method" file="Method.java" line="597" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="101" method="invoke"/>
                      <ns2:frame class="weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker" file="WLSInstanceResolver.java" line="83" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.InvokerTube$2" file="InvokerTube.java" line="152" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.EndpointMethodHandler" file="EndpointMethodHandler.java" line="264" method="invoke"/>
                      <ns2:frame class="com.sun.xml.ws.server.sei.SEIInvokerTube" file="SEIInvokerTube.java" line="93" method="processRequest"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="604" method="__doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="563" method="_doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="548" method="doRun"/>
                      <ns2:frame class="com.sun.xml.ws.api.pipe.Fiber" file="Fiber.java" line="445" method="runSync"/>
                      <ns2:frame class="com.sun.xml.ws.server.WSEndpointImpl$2" file="WSEndpointImpl.java" line="275" method="process"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit" file="HttpAdapter.java" line="454" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.HttpAdapter" file="HttpAdapter.java" line="250" method="handle"/>
                      <ns2:frame class="com.sun.xml.ws.transport.http.servlet.ServletAdapter" file="ServletAdapter.java" line="140" method="handle"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke" file="HttpServletAdapter.java" line="319" method="run"/>
                      <ns2:frame class="weblogic.wsee.jaxws.HttpServletAdapter" file="HttpServletAdapter.java" line="232" method="post"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="310" method="doPost"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="727" method="service"/>
                      <ns2:frame class="weblogic.wsee.jaxws.JAXWSServlet" file="JAXWSServlet.java" line="87" method="service"/>
                      <ns2:frame class="javax.servlet.http.HttpServlet" file="HttpServlet.java" line="820" method="service"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction" file="StubSecurityHelper.java" line="227" method="run"/>
                      <ns2:frame class="weblogic.servlet.internal.StubSecurityHelper" file="StubSecurityHelper.java" line="125" method="invokeServlet"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="292" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletStubImpl" file="ServletStubImpl.java" line="175" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction" file="WebAppServletContext.java" line="3594" method="run"/>
                      <ns2:frame class="weblogic.security.acl.internal.AuthenticatedSubject" file="AuthenticatedSubject.java" line="321" method="doAs"/>
                      <ns2:frame class="weblogic.security.service.SecurityManager" file="SecurityManager.java" line="121" method="runAs"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2202" method="securedExecute"/>
                      <ns2:frame class="weblogic.servlet.internal.WebAppServletContext" file="WebAppServletContext.java" line="2108" method="execute"/>
                      <ns2:frame class="weblogic.servlet.internal.ServletRequestImpl" file="ServletRequestImpl.java" line="1432" method="run"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="201" method="execute"/>
                      <ns2:frame class="weblogic.work.ExecuteThread" file="ExecuteThread.java" line="173" method="run"/>
                   </ns2:stackTrace>
                </ns2:exception>
             </detail>
          </S:Fault>
       </S:Body>
    </S:Envelope>

  • Proxy to soap error

    hi,
    I am doing proxy to saop asyncronous scenairo, In SXMB_MONI it is chequerd flag but in rwb i m getting error in response with following details.
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: The header 'ReliableMessaging' from the namespace 'http://sap.com/xi/XI/Message/30' was not understood by the recipient of this message, causing the message to not be processed.  This error typically indicates that the sender of this message has enabled a communication protocol that the receiver cannot process.  Please ensure that the configuration of the client's binding is consistent with the service's binding.
    What could be the reason. please advise.
    Regards
    Laxmi Bhushan

    Thanks Stefan.
    Solved
    Regards
    Laxmi Bhushan

  • Proxy to soap synchronous

    Hi.
    In my synch proxy to soap scenario, facing the error while testing web service from altova spy.
    Err thrown after i send request is "<RCVR Deter> "MESSAGE_INCOMPLETE"
    This is when i use WSDL generated from my ID.
    When i use wsdl given from client it doesnt post at all, with message code (500).
    Scanned sdn and asked everyone i cud, but cudnt hit any solution.
    I noticed following things in WSDL given by client,
    1. URL within WSDL's adress tag, when pasted in browser doesnt opens WSDL or any web page rather  says "Welcome to axis.."
    2,When added ?wsdl at the end of the url, the wsdl can be seen.(so using URL with "?wsdl" as my target URL in soap receiver ID, is approach right??)
    3.In WSDL from client has, <wsdl:operation name="XXX" parameterOrder="XXXXX">
    what ideally shud be approach when soap is at receiver end.
    Also, Great confusions about These::
    1. URL in target url in soap receiver
    2.URL of file location, while sending request. (shud b wsdl file saved in desktop, or url of wsdl )
    3.soap end point and action (what if, when no action is there in wsdl) when changing soap parameters 
    4.In moni and also in altova getting err <Receiver determintaion> Message_incomplete
    5.when to use wsdl generated from ID and when to use wsdl provided from client.
    I am badly stuck in this scenario. Couldnt find any way out, at the same time its v v critical object.
    wud be thankful if someone can help me in sorting out this..
    thanks

    5.when to use wsdl generated from ID and when to use wsdl provided from client.
    This should be your first question
    Use wsdl generated by ID in case of soap sender scenarion and use wsdl from client in case your scenario is soap receiver.
    This is when i use WSDL generated from my ID.
    For the receiver soap scenario, you dont have to generate wsdl in ID. Use the wsdl given by receiver.
    When added ?wsdl at the end of the url, the wsdl can be seen
    If your scenarion could work after adding this, then there is nothing wrong in this approach.
    1. URL in target url in soap receiver
    Use the URL provided by the receiver system. The same url is present in the wsdl file that receiver provide to you.
    2.URL of file location, while sending request. (shud b wsdl file saved in desktop, or url of wsdl )
    What do you mean by this? For a soap receiver channel, you only need the URL and use the wsdl provided by receiver.
    3.soap end point and action (what if, when no action is there in wsdl) when changing soap parameters
    Action is not compulsary. Just use the wsdl provided by client and check whether it contains <action> tag or not. If it has, then only provide the action.
    4.In moni and also in altova getting err <Receiver determintaion> Message_incomplete
    Your case is of soap receiver. You should not send messge from Altova to XI in this case.
    Regards,
    Prateek

Maybe you are looking for