Error in the appropriation of Order - KO88

After running the kon2, cost centers are maintained with a balance of zero.
KO88 to run, and the order is also cleared, but the maintenance cost center to take back the balance.
What can be?
I checked the rule of appropriation and it is correct.

Hi Ajay,
The standard for appropriation is a machine center tubes.
But the bigger problem is that when I run KO88 returns values for the cost center that were cleared in the kon2.
I checked the standard is right and ownership, 100% for the Cost Center Machine Tubes.
Look accounting for KO88:
C - ORD 4000000047 - materials
D - CCS 13049 (Machine Tubes) - materials
C - ORD 4000000047 - 101 maintenance activity
D - CCS 13049 (Machine Tubes) - 101 maintenance activity
C - ORD 4000000047 - 101 maintenance activity - kon2
D - CCS 13049 (Machine Tubes) - 101 maintenance activity - kon2
C - CCS 13049 (Machine Tubes) - 101 maintenance activity - kon2
D - 13046 TAT (Mechanical Maintenance) - Maintenance activity 101 - kon2
Ajay, these orders have very appropriate today. Please help me.
Thank you for your support.
Edited by: Cristiane França da Silva on Mar 1, 2011 4:18 PM

Similar Messages

  • Update termination error at the time of order creation and chamge?

    Dear gurus,
    Facing an error at the time of creation of order.
    system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
    please treat on priority
    regards,
    krai

    Hi,
    Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
    Or go to SBWP T.Code in the user where you got this error and check the inbox.
    It will display why the error is appearing.
    Show the same to the ABAPer and ask them to work on it.
    I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
    Regards,
    Krishna.

  • Update termination error at the time of order creation

    Dear gurus,
    Facing an error at the time of creation of order.
    system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
    please treat on priority
    regards,
    krai

    Hello ,
    "Update terminated " error has two reasongs.
    First is system update  was not active and hence terminated
    For this to check Goto the transaction code SM13  and  check whether the SYSTEM UPDATE is active or not.
    If it is active ,
    Then click on the Option TOBE updated in the status  and execute, then in the next screen you can find some list of documents that are not updated and causing error .
    Click on MODULES in the screen and find the erro which causing this error.
    Most this kind of error will happen if something in the Funcion Module or USER EXIT is missing.
    Please check and revert back if you need further details
    Also check the link
    http://help.sap.com/saphelp_nw04/helpdata/en/e5/de870535cd11d3acb00000e83539c3/frameset.htm
    regards,
    santosh

  • Error in the explosion of "order report for element" in MD04

    Hi gurus,
    On the report MD04, I try to explode the "order report for element", where you can find the tree of the bom with the mrp results to cover the materials needs, but the following error occurs:
    "Order 000001008418 possibly contains recursive BOM components
    Message no. MF331
    Diagnosis
    The order contains component reservations that could have a higher low-level code than that of the order material.
    To avoid an endless loop the requirement for this component is not included."
    As one of you suggested, I tryed to install the  Snote: 10000698, but the systeme tell me that there are no valid input to manage.
    The error related is the follow:
    "SAP Note does not contain valid correction instructions
    Message no. SCWN002
    Diagnosis
    You tried to implement corrections that are contained in an SAP Note.
    The corrections in this SAP Note are, however, not valid for the release and Support Package level of your system. This means that the error that is described in the SAP Note either did not occur in your system, or it has already been corrected by a Support Package.
    In certain cases the error cannot be corrected by an SAP Note correction.
    System Response
    The system cannot implement the SAP Note.
    Procedure
    Follow the recommendations in the SAP Note text."
    ..now, what can I do?I can find No significative instruction on the note!!
    Please help me: our client is very annoyed by this problem!
    Thanks,
    Valentina

    Dear,
    Error message MF331 'Order & possibly contains recursive BOM components' is generated in the order report.
    If the header BOM material same you are using as a component then BOM become Recursive.
    If you create a recursive BOM, you must decide whether you want to allow recursiveness or delete the component that caused the recursiveness,
    Go to CS02  BOM of that material and check the sets  recursive indicator.
    Also refer the OSS Note 839879. 161742 - Consulting note:
    Regards,
    R.Brahmankar

  • Error in creating a Service Order in the transaction CRMD_ORDER

    Hello,
    We are trying to create a service order in CRM and it shows no errors on CRM side while it is processing and saving it. But after the save is complete, it returns a error from the connected R/3 side tht says "An error occurred in system D19CLNT100 during account assignment".
    Any ideas as to how can this be corrected.
    The  details are as under:
    Diagnosis
    Errors occurred when assigning an account assignment object to a business transaction. To view the error message, see the accompanying log file.
    Transfer Log
    Business partner with GUID 4459115E6EAB014100000000099A6565 does not exist (Notification E R11 124)
    Business partner with GUID 4459115E6EAB014100000000099A6565 does not exist (Notification E R11 124)
    Characteristic "Sold-to party" for business scenario "CRM Service" is missing (Notification E IAOM 007)
    Characteristics for Controlling object have errors (Notification E IAOM 034)
    Characteristic "Sold-to party" for business scenario "CRM Service" is missing (Notification E IAOM 007)
    Characteristics for Controlling object have errors (Notification E IAOM 034)
    The BP exists on both CRM and R/3 side in both tables CRMKUNNR and CRM_BUT_CUSTNO.
    But probably some problem with Costing.
    Any ideas are highly appreciated. Thanks.
    Rgds
    Priyanka

    Hello Priyanka,
    I have the same problem by using Service Ticket in SAP CRM 5.0.
    Did you already solved this issue? If so, can you please provide the solution!?
    How can I activate and check the transfer log?
    Thanks and regards
    Alex

  • I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

    I am trying to order a book with iphoto, I keep getting the same error message.
    " A network error occurred while processing your order, please check your network connection and try again"
    I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
    I have ordered two books a few months ago without any problems.
    Now I keep getting the same message either half way into
    the order or at the final hurdle after the images have been uploaded.
    Any ideas?
    My shared Network has been fine and that does'nt seem an issue.
    Help.

    Try again in a couple of hours - sometimes it is a temp condition
    LN

  • There is an error in the order submission.

    Hi,
    While placing order in iStore(11.5.7 vis) i got the following error."Error messages from Order Management. The item specified is invalid or does not exist in the warehouse you specified. Please Enter a valid item- warehouse combination. Invalid unit of measure for this item. There is an error in the order submission."
    The item was created only in the master inv org (V1) and not in M1.The error appeared only when placing order in istore and not in OM since warehouse was explicitly chosen. After assigning the item to M1 the order was placed without any error in istore.
    Would like to know why istore picks up item particularly from M1.Is there any profile option or setting?
    Thanks & Regards,
    Nithya

    symptom: The item specified is invalid or does not exist in the warehouse
    you specified.
    Please enter a valid item-warehouse combination
    change: Note Role : Navigation -> Order management -> Order return -&
    gt; Import order -> Correction.
    cause: Internal ordered enabled flag not checked for the item
    fix:
    Check the internal order Enabled flag for the Item
    Thanks
    Naveen

  • Error at the time of Production order cancellation.

    Hi PP Gurus,
    The transactions happened when Sales order costing was activated
    1. Sales order created
    2. Production order creation, release
    3. Production order confirmation and QM lot created
    4. QM lot cleared with Result recording and UD has taken
    5. While doing PGI system started to ask about Sales order costing
    Now as per CO requirements all the documents has to be reversed and Sales order has to be deleted. But when I'm trying to cancel production order confirmation, it's giving error that Stock of Sales order quantity is deficit in Quality stock (As it is already moved to unrestricted Sales stock). And when we reversed it through Movement type 322 its giving error like UD has already taken for partial lot....
    We tried following options.
    1. Another Sales order irrelevant to Sales order costing created and we tried to move stock from old sales order to new sales order through movement type 413E but got the same Sales order costing error.
    2. We tried to move stock from old Sales order to unrestricted use, same error we got.
    As per my knowledge UD can't be reversed in Standard system.... What could be done in that case... Please help if some one faced the same situation.
    Thanks & Regards,
    Abu Arbab

    Dear,
    If you want to change UD code, it is very simple from QA12. But if you want to reverse goods movements also, it is some thing big process. please check OSS notes 175842.
    Please check SAP note note 33924 Reversing the UD and 175842-QM lot stock reversal.
    Please refer my reply in this thread also,
    UD cancellation or reverse after GR
    Please go through the transaction CO09, you enter your plant,Material, MRP area (Plant) and Checking rule then execute, it will take you to next screen there you can able to see what are the conformed quantities for the Sales document wise(Reservations), and also you can see the current stock possition (Cummiletive ATP Quantity).
    Regards,
    R.Brahmankar

  • Date Error on the Service Order while using service product

    Hi PM experts,
    I am working on the scenario resource-related billing, using service product in the service order created from a service notification linked to a contract with service product as the line item.  service product is the material of DIEN material type.
    when i was trying to save the service order created using transaction code-IW31, i am getting the  Error Message:
    " *SYS:Date 00.00.0000 not expected*".
    This error started only yesterday, and it was not there before. Basis team has confirmed that they have not done any new
    updates to the system.
    Had anyone encounered this problem before, if yes kindly let me know the solution and the steps to resolve it.
    thanks for the help.
    regards,
    rajaraman

    Hi,
    Here is the error description with message number,
    SYST: Date 00.00.0000 not expected.
    Message no. FGV004
    As an update to this thread, while searching for the reasons for the problem, i found that the characteristics used in the
    warranty class were carrying default date value as 00.00.0000.  can this be a reason for getting this error as the service
    product number which is a DIEN material type is linked to the master warranty which is in turn assigned to the equipment.
    Hope this information helps.
    regards,
    rajaraman

  • Error Msg: The DBM Order contains old external/internal billing documents

    Dear Gurus,
    In DBM 6.0, the error message 'The DBM order contains old external/internal billing documents' is coming while trying to cancel a billing document which was generated in previous year and not got cleared (settled) so far.
    Currently, this issue is being addressed through DEBUG mode.
    Kindly let me know the root cause of this issue.
    Thanks
    Surya

    Hi,
    please check following notes which are relevant:
    1058468
    1151370
    1146387
    1332583
    1142137
    1169223
    BR
    Robert

  • Error while closing the open purchase order for MRP run

    HI expets,
                     We are facing issue while closing the old purchase order(18.12.2007) for MRP run, if we are clicking delivery completed for the particular line item ,system is showing the error NET PRICE MUST BE GREATER THAN ZEROthough we have made GR and IR aganist the line item an value is also showing in the purchase order history tab, but in the condition tab there is no value showing for the particular line item .Kindly suggest the way forward.
    regards
    Karthick sundaram

    one thing for sure, you cannot proceed without maintaining proper conditions in the PO.
    Why they are not there or not anymore there is probably caused by customizing or vendor master data changes.

  • Any report or Table to see the list of orders  with errors  in SAP CRM?

    Hello All,
    Can anyone help me in getting  a table or report  to find the list of orders with errors in SAP CRM?.
    Let me know if you need any additional information.Thanks in advance.
    Cheers
    Sreedhar
    Edited by: sreedharhazari2 on May 26, 2010 11:59 AM

    Hello Chait,
    I got the solution  by this report CRM_ORDER_CHECK_STATUS.
    Anyhow thanks very much for your inputs.
    Cheers
    Sreedhar
    Edited by: sreedharhazari2 on May 30, 2010 8:48 AM

  • HT1725 I am unable to download app updates.  Error windows said I must order from the Canadian iTines Store.  How do I switch from the US Store to the Canadian Store?

    I am unable to download app updates.  Error windows said I must order from the Canadian iTines Store.  How do I switch from the US Store to the Canadian Store? Using iPad2.

    Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • Following error message 'The item "iPhoto Library" can't be moved because "10.0.1.3" can't be modified' pops up, when I'm trying to copy my iPhoto library to my  Synology NAS. Any thoughts what I need to do in order to succeed?

    Following error message 'The item “iPhoto Library” can’t be moved because “10.0.1.3” can’t be modified' pops up, when I'm trying to copy my iPhoto library to my  Synology NAS. Any thoughts what I need to do in order to succeed?

    Would you rather recomment me to change to another programme like to iphoto to store and work with my photos?
    I would use the NAS for documents and other data that do not need a library with database files inside. For iPhoto a small portable drive that you can plug in directly would be perfect; you can get one for 79$ http://mac-portable-hard-drive-review.toptenreviews.com/western-digital-review.h tml
    Before you try to copy your iPhoto library anywhere, make sure it does not have any inconsistencies, that could prevent copying. Run a rebuild, using the First Aid tools. See this post by Old Toad on how to do it: Re: iPhoto version 8.1.2
    The item “iPhoto Library” can’t be moved because “10.0.1.3”
    That error message is very typical for copying between incompatible file systems. I get this error message usually when I try to move iPhoto libraries or Aperture libraries to drives with MS Dos (FAT) or unix formatting, or when some of the image files inside the library contain ethnic characters (Umlaute), have very long file names, or the filenames contain other special characters.
    Do you have any other large data sets that you could try to move to your NAS instead of your iPhoto library?  Movies, Music? Then move these first to have enough working space, when you try to move the iPhoto library. If you are running out of space, it will be difficult for the OS to move large amounts of data at once. That will need working space.

  • Error on getting as list of Clients with the last sales order 90 days

    Hi Dear,
    SELECT T0.[CardCode], Max(T0.[DocDate]) as [Last Sales Date], Datediff(D, Max(T0.[DocDate]), GetDate()) as [Days Old], Sum(T0.[DocTotal]) FROM ORDR T0 WHERE Datediff(D, Max(T0.[DocDate]), GetDate())>90 GROUP BY T0.[CardCode]
    I am trying to create a list of the clients for whom the last sales order date is greater then 90 day. When I run the above query, I get the following error message:
    u201C1). [Microsoft][SQL Native Client][SQL Server]An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference.
    2). [Microsoft][SQL Native Cli u201C
    Can somebody tell me what I am doing wrong or is there any other way to get the last sales order date.
    Thanks.

    Hi,
    Check this :
    SELECT T0.CardCode, Max(T0.DocDate) as 'Last Sales Date', Datediff(D, Max(T0.DocDate),
    GetDate()) as [Days OLD], Sum(T0.DocTotal) FROM ORDR T0
    GROUP BY T0.CardCode
    HAVING Datediff(D, Max(T0.DocDate),GetDate())>90
    Kind Regards,
    Jitin
    SAP Business One Forum Team

Maybe you are looking for