Error in the Hierarachy structure

Hi Gurus,,
I got one error like Error in the Hierarach structure while daily loading from R/3 to BW , so pleace give me the solution for this error:,how to salve it
Thanks& in advance
Nave

hi
See the hierachy version or hierachy levels in both sides.
Are they in same version and trying to upload data for the correct level
Hope this helps
Regards
Ganesh N

Similar Messages

Error in the hierarchy structure - Data Load Failure

Hi
We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
Error in the hierarchy structure
Node ID 00016749 does not exist.
Node ID 00005867 starts an endless loop
Node ID 00001367 has not been included in the hierarchy
Can any one help me out to solve this issue?
Best Regards,
Venkata.

hi,
refer to this thread.
No hierarchy displaying in the Maintain Hierarchies

Error in the Hierarchy structure

Hi All,
We faced error an hierarchy load. Error records written to application log.The level of the node ID 000284 does not suit the lev. of the higher lev. node.
Help to solve this error.
Thanks,

Hi Hema latha...
Please find the below link this may helpful ........
http://help.sap.com/saphelp_nw04/helpdata/EN/80/1a6729e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/52/671595439b11d1896f0000e8322d00/frameset.htm
/people/kristoffer.engh2/blog/2007/04/03/roles-and-authorizations
Regards
Sudheer

The row structure of the table BANFTAB is incorrect

Dear Experts,
I get right here the error message
The row structure of the table BANFTAB is incorrect
ZBANFN is a table type and has the line tab BANFN.
Can you pls tell me what is wrong here ?
FUNCTION Z_CHANGE_EBAKZ_FLAG.
*"*"Lokale Schnittstelle:
*" CHANGING
*"     VALUE(BANFTAB) TYPE ZBANFN
data lt_eban type table of eban.
data ls_eban type eban.
SELECT * FROM eban into table lt_eban where BANFN IN BANFTAB AND EBAKZ EQ 'X'.
IF SY-SUBRC IS INITIAL.
    LOOP AT lt_eban INTO ls_eban .
      ls_eban-EBAKZ = ' '.
      modify eban from ls_eban.
    ENDLOOP.
ENDIF.
ENDFUNCTION.

Hello,
You have to use a ranges table in this case.
FUNCTION Z_CHANGE_EBAKZ_FLAG.
*"*"Lokale Schnittstelle:
*" CHANGING
*"     VALUE(BANFTAB) TYPE ZBANFN
data:lt_eban type table of eban.
data:ls_eban type eban.
data:
l_r_banfn type range of banfn,
l_wa_banfn like line of l_r_banfn,
l_wa_banftab like likne of BANFTAB.
loop at banftab into l_wa_banftab.
l_wa_banfn-sign = 'I'.
l_wa_banfn-option = 'EQ'.
l_wa_banfn-low = l_wa_banftab-banfn.
append l_wa_banfn into l_r_banfn.
clear l_wa_banfn.
endloop.
SELECT * FROM eban into table lt_eban
where
BANFN IN L_R_BANFN "BANFN IN BANFTAB
AND EBAKZ EQ 'X'.
IF SY-SUBRC IS INITIAL.
    LOOP AT lt_eban INTO ls_eban .
      ls_eban-EBAKZ = ' '.
      modify eban from ls_eban.
    ENDLOOP.
ENDIF.
ENDFUNCTION.
or you can use FOR ALL ENTRIES :
FUNCTION Z_CHANGE_EBAKZ_FLAG.
*"*"Lokale Schnittstelle:
*" CHANGING
*"     VALUE(BANFTAB) TYPE ZBANFN
data lt_eban type table of eban.
data ls_eban type eban.
SELECT * FROM eban into table lt_eban
FOR ALL ENTRIES IN BANFTAB "--> Add this
where BANFN = BANFTAB-BANFN
AND EBAKZ EQ 'X'.
IF SY-SUBRC IS INITIAL.
    LOOP AT lt_eban INTO ls_eban .
      ls_eban-EBAKZ = ' '.
      modify eban from ls_eban.
    ENDLOOP.
ENDIF.
ENDFUNCTION.
Try this & let me know in case of any issues.
BR,
Suhas
Edited by: Suhas Saha on Feb 10, 2009 5:43 PM

"The Dictionary structure or table "*C865" is either not active or does"

Hello experts,
I have a transaction - VKOA. I get the following error on executing this t-code. The program used by this t code is SAPL089C.
The error is
Runtime errors         SYNTAX_ERROR
Occurred on     11/23/2009 at   05:12:58
Syntax error in program "SAPL089C ".
What happened?
The following syntax error occurred in the program SAPL089C :
"The Dictionary structure or table "*C865" is either not active or does not exist."
Error in ABAP application program.
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
The following syntax error was found in the program SAPL089C :
The Dictionary structure or table *C865 is either not active or does not exist.
Please suggest a suitable solution to this problem...
Many Thanks in adv.
Kunal
Edited by: kunal kotak on Nov 23, 2009 6:53 PM

Hi ,
I will try the solution propesed by Max.
In the meantime, I would like to confirm if there is something related to SAP Note # SAP Note 72121. Refer the following details from the note.
Symptom
When you maintain account determination (FI or SD), you get the error
message:
The DDIC structure or table "*C400" is not active or does not exist.
OR
The system writes a dump with DBIF_NTAB_TABLE_NOT_FOUND, C400 was not
found.
C401 can also appear instead of C400.
Additional key words
Tables C400, C401.
Program: SAPL089C, L089CT00
Transaction: VKOA
Solution as per the note
1. Execute the program RV12A002. On the selection screen, enter Usage C,
Tables 400 to 401.
WARNING: Make sure that you only delete C400 and C401!
Execute the program.
2. Execute program RV12A001. On the selection screen, enter Usage C and
mark 'Reports & Screens'.
Can there be sometihing similar to this for C865 table as well. Just a thought.

Error while creating the Organization structure.

Hi,
I am trying to create an Organization structure in SRM 5 sytem, I have created a Root for the structure and when i try to click on the Attribute Inheritance or the Check tab below i am getting an error "Start program BBP_LOCATIONS_GET_ALL first (see note 563180 and long text)" but i have replicated one plant from the R/3 system using BBP_LOCATIONS_GET_SELECTED and the material groups and all the other relevant datas from R/3. I can see in the table BBP_LOCMAP the plant been associated with the relevant company code. I am now struck in creating the organization structure. I am not sure where i am going wrong while creating the Org model.Please give me your valuable inputs to overcome this error.
Regards
GGL

Go to transaction SM30, table T77S0
Add an X to the following entry:
Group = EBP
Sem abbr. = LMIGR
Val. Abbr. = X
Description = Locations Successfully Migrated
This tell the system that the locations have been replicated and the error indicating location get all needs be executed will go away.
thanks,
justin
Edited by: Justin Farley on Feb 25, 2009 7:16 PM

Error while creating fields in the Category Structure Urgent

Hii,
I am getting the Error while creating the Category structure fields
Error Message : Entry YF_COU does not exist in CABN - check your entry
Message no. 00058
Diagnosis
Input values must be defined in Table CABN. The value or values 'YF_COU ' are not specified in this table.
Procedure
Check whether the input is correct and correct if necessary.
Procedure for System Administration
If this is not an incorrect entry, check the system settings and change them if necessary.
If there is a connection to the Customizing system, you can maintain the system settings by choosing Customizing in the Performance Assistant or Maintain Entries (F5) when displaying the help in a modal dialog box.
Please help me in this error
Regards,
Kumar

Hii,
I have assigned the Characteristics group /AFS/SAP_C to the characteristics but still i am getting the error when i assign the Char Field under the Category Structure.
I have manually created the Characteristics Group AFS characteristics for categories. Is this will automatically updated or while installing the Add On.
Please explain of the Configuration related to the Category Structure.
Regards,
Kumar

Bank Analyzer - Error while creating the Position Structure

Hi,
We are implementing Bank Analyzer 6.0 and Implementing Financial Instrument and Financial Transaction.
We facing an Error while creating the Position Structure,
Error Message: Status of structure S40CURRACC is "New"
Anyone has an idea how to fix this?
Thank you,
John Crawford

Hi,
1.Run Transaction - /BA1/F0_SGS_START
2.Entered the name of the structure and try to "activate".
3.It will get Active without any inconsistency.
Regards
Phani

Package Check Error while activating the Appended Structure

Hi CRM Gurus,
A structure is appended to a standard structure. while activating the appended structure its throwing Error called-
<b>Package Check for Table/Structure ZCDPR_BW_BUPA_LINKS</b> .
<b>The object TABL ZCDPR_BW_BUPA_LINKS uses SQLT DPR_BW_BUPA_LINKS</b>.
plz help me to get the solution in this regard.
Regards,
Gokila

Hi
   were you able to solve your problem?
   If so please update us. We are also facing same issue while activating the table.
   let us know the solution if you have solved the problem that will help us a lot.
Thanks and regards,
Amit

Error while enhancing the Extract structure in LBWE

Hi All,
When I am trying to change the extract structure os logistic extractors in LBWE, it is giving me an error saying "Entries for application 11 still exist in the extraction queue".
Below is my scenario:
I have 3 clients in the same R/3 system, Client 010, 020 and 030.
Clients 020 and 030 are connected to my BW system. Client 010 will be used for all development while test loads can be done from clients either 020 or 030. Till now, I have tested my data flows only from client 030. Now, I have to add some extra field to the structure in LBWE but facing the above mentioned error.
I went into LBWQ in both the client 020 and 030 and deleted the queue and then tried to change the extract structure in client 010 but still the same error.
What else do I need to do to resolve this?
Thanks,
RPK.

Hi Raki,
We are still in development phase. I did all my developments(R/3) in client 010. Till now I did only full loads to BW from client 030 and haven't done any loads from client 020. My BW system is also connected to another sandbox client 100 but I haven't done any loads from that client aswell.
As I have to add some extra fields to the extractor from LBWE, I did the follwing steps in R/3:
1) I have deleted the setup tables from client 010, 020 and 030.
2) Deleted the data from LBWQ from clients 010, 020 and 030.
3) Trying to change the extract structure by clicking on "Maintenance" for the extractor in Client 010.
At this point it is throwing an error.
I thought that the client 100 might be a problem as I have transfer rules created in my BW system from this source system as well. As I do not need this source system anymore, I have deleted it from BW and tried changing the structure in LBWE but still the same problem.
Any ideas would be highly appreciated.
Thanks,
RPK.

Error is recreat the dynamic structure.

Hi all,
Thanks for all your help, I can finally get the dynamic structure and use that in my development. In my case, user can select many items on the list (which will geneart dynamic structure to strore the data). It works at at the first time. However, when I selecte another item again (which will genereate the same structure) error occus:
[ LT_GERTAB-BNAME has already been declared. ]
What are the possible solution in this case?
For more details:
1. I have a report list of different structure.
2. And there are lots of reports of different date of a report with same structure.
After I selected the 1st case, thing goes right and after the first selection of 2nd case, it still works.
But the second time I try to select another report of different date, error occurs.
How can I pass through this error?

Since it didn't clear up the previous field list, so duplicated field appears.

Error: all members of structure are assigned to the same switch

Hi,
I have transported my query to QA environment sucessfully with error code (0). When I execute my query is runs fine but it gives me error "all members of structure 'Key Figures' are assigned to the same switch, query will fail if switch is not active" when I open it in Bex Designer.
Any idea what could be the reason.
Regards,
Divy

Hi,
any idea what´s behind this "error message" if re-importing the query seems to solve it? We only face this issue with a query in our productive system, but not in the development or test system. And because we can not test it, we have not implemented the note yet.
Has anyone implemented the note already?
Regards
Lars

Error in Transporting the Transfer structure

Hi can any body tell me . Iam getting this error while transporting from BW System the transfer structure for 0HR_PY_1_CE.
1. Transfer structure 0HR_PY_1_CE_LA does not exist.
2. Error RSAR 440 during after import handling of objects with type(s) ISTS
3. Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
I have activated the transfer structure through this programme - program RS_TRANSTRU_ACTIVATE_ALL.

Check the below notes:
Note 1009638 - RSAR 440 when you activate transfer rules applicable for BI7.0 Less than SP12.
Note 736668 - RSAR 440: Transfer structure & does not exist Applicable for 3.x system.
Please check the above Notes and based on your system patch level and issue you need to choose the right one. Second one deals with the Hierarchy.
Hope this helps..
Murali

ODS activation error after the structure change

Hi all,
      I am getting a short dump with " "DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC " error when I am trying to activate an ODS after changing its structure. Do I need to change any setting before loading the data in to the ODS after adding few more fields to it. Exact error says
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"ACTIVATE_SIDS" "(FORM)"
Thanks

The above-described symptom is due to a program error during the transfer of error messages. The problem can occur, for example, if a hierarchy is activated during the activation of an ODS object.
If the indicator 'BEx Reporting' is set for the ODS object, entries are created in the SID tables of characteristics involved during the activation of requests for this ODS object. Newly-created SID values must then be inserted into hierarchy tables. This is not possible for reasons of consistency if a hierarchy is activated at this time. The RRHI_CHAVLS_REQUEST_TO_HIERA function module is used for inserting newly-created SID values in hierarchies.
To simplify the search for the cause of the problem, additional error messages are now displayed in the monitor. If the problem is triggered, for example, by the simultaneous activation of a hierarchy, the error message RH 14 is issued. As described in note 717967, this error message contains the name of the affected hierarchy. If the activation of an ODS object is cancelled due to a serious error, this now also causes additional entries in the log of transaction SM21 (Syslog). These entries start with the character string '> RSDRO':.
Solution
BW 3.0B
           Import Support Package 21 for 3.0B (BW3.0B Patch21 or SAPKW30B21) into your BW system. The Support Package is available whennote 0679665 with the short text "SAPBWNews BW3.0B Support Package 21", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 15 for 3.10 (BW3. 10 Patch15 or SAPKW31015) into your BW system. The Support Package is available when note 0601055 with the short text "SAPBWNews BW 3.1 Content Support Package 15" is released for customers.
BW3.50
           Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available when note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, is released for customers.

Error in the bind variable!!

Hi all,
I have the following quiery in my report
SQL> ed
Wrote file afiedt.buf
1* select add_months(to_date('30-apr-07') , rownum- 1) i from all_objects where rownum < 5
SQL> /
I
30-APR-07
31-MAY-07
30-JUN-07
31-JUL-07Now I wrote a finction in the group as
function CF_bFormula return Number is
b number(17, 3);
begin
select t.B_VAL into b from test6152 t where to_date(t.i_date, 'dd-mon-yy') = to_date(:i, 'dd-mon-yy');
return (b);
end;The this function is giving me an error. ORA-01403 No data found
Can anyone point out the error.
The structure of the TEST6152 table is like this
SQL> select * from test6152;
I_DATE    CUR      B_VAL      C_VAL
30-APR-07 USD         20         30
31-MAY-07 USD         50         10
30-JUN-07 USD         25         18
31-JUL-07 USD         13         12Im quite confused beacuse this quiery gives me the correct output
SQL> ed
Wrote file afiedt.buf
1 select t.B_VAL from test6152 t,
2 (select    add_months(to_date('30-apr-07') , rownum- 1) i from all_objects where rownum < 5) L
3* WHERE to_date(t.i_date, 'dd-mon-yy') = to_date(I, 'dd-mon-yy')
SQL> /
     B_VAL
        20
        50
        25
        13Thanks in advance

Today I restart my comp and run the report and ....Woah!
It runs without ant error!!!
I wonder what went wrong yesterday!

Error in the Hierarachy structure

Similar Messages

Maybe you are looking for