Error in transaction SOAMANAGER from Dev ECC6

Hi,
I am getting below error in transaction SOAMANAGER  -- Application & scenario comm -- single service admin -- select service Z* -- apply selection -- Open Web Service navigator for selected binding then getting error as below:
Error:
Cannot download WSDL from http://<host>:8010/sap/bc/srt/wsdl/bndg_DF5CDA3549E109F1A9D000145E7A77A0/wsdl11/allinone/ws_policy/document?sap-client=010: It is not allowed to access this service. If you believe you should be able to, please contact your system administrator
I appreciate if you could help me in this.
- Pankaj

Hi Pankaj,
This error message is caused by security considerations. The WS Navigator can access only web services which are deployed on the local engine. To allow the WS Navigator to access an external hosts, you have to add
these hosts, to the WS Navigator white list. The white list is a list hosts which the WS Navigator should be able to access.
Please refer to this link, which describes where the white lists are maintained in the visual administrator: http://help.sap.com/saphelp_nw04/helpdata/en/7c/f257422d095542e10000000a1550b0/content.htm
When configuring the white lists one can use wild card. For instance. If a web service deployed on www.sap.com should be accesseed by the WS Navigator, then the the white list should contain *.sap.com. The whitelist can contain more then one host, in that case they should be separated by an comma or semi-column.
Hope this can fix your issue.
Regards,
Blanca

Similar Messages

  • Error while importing request from DEV to PROD

    Dear Experts,
                      i am having the problems with request no.. There are two transport request nos and these have to be transported
                     from DEV to PROD. I relesed these two but while importing into PROD showing everthing completed successfully
                      with one error and error is Generation or programs and screens  for both transport  requests .
                      I am just enable to understand what this message is for ..
                       Please someone help me out in this....
    with regards.
    Praveen.
    Moderator message: please search for available information/documentation before asking, read the detailed transport logs, correct the errors, try again.
    Edited by: Thomas Zloch on Dec 13, 2010 6:05 PM

    Hi,
    First check the source system: ZSTGLDV110 is exists or not. check the rfc connections (Also check the source system assignment in both the system to each other). check the settings in the stms tcode. check the suppoet pack on your quality system,.... there are plenty of reasons.
    thanks.

  • Error migrating Master Repository from Dev. to Prd, Environment

    Hi,
    We are trying to migrate our development environment (dev_env) to production (prd_env), so for this we are doing the following:
    - We create a Execution Work Repository (prd_env)
    - We create a Master Repository (prd_env) with different internal ID (dev_env)
    - We export one scene from dev_env and import to prd_env
    - We export Master Repository from dev_env and import to prd_env, but in this point we have problem with the import wich say
    "com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ### KEY com.sunopsis.res.object / DwgDuplicationTools.GeneralImportObjectFailureMsg###     a"...".run(Unknown Source)Caused by: java.sql.SQLException: ORA-02291: integrity constraint (....) violated - parent key not found"
    Please, some one help us with this issue, thanks!!!

    Hi,
    Both your Prod and Dev are in same platforms?
    Normally Dev we do on windows and production in Linux.
    IF, your case is above. then create another schema in same platform(DB and OS ) and import the master and work repositories in Insert update mode from dev.
    After import, re-export this newly created repositories and try importing into your production.
    I have faced the similar issue and after following the above process, I am able to import my master and work properly.
    If you are still not able to resolve this issue after following the above way.
    Then try export you Logical and Physical Schema instead of master repository.
    While importing , please import the Physical topology(Topology) and then the Logical Topology.
    Thanks,
    Nagarjuna

  • Error while Transport objects from DEv to QA-File transport

    Hai Experts!
    While exporting objects from Dev to Quality using File Transport. it taking long time and no erro msg is thown and it is not getting end .Did any face this problem. Can any one help me to solve this.
    Regard's
    Preethi.

    Hai!
    Issue is solved.
    I try to export the Individual object -->Message mapping.
    While exporting i unchecked the Option With software component version Defenition.
    Now it is success. Thanks all replies.
    Regard's
    Preethi.

  • Errors while transaction download from ECC- CRM

    we are trying to download transactions from ECC 5.0 to CRM 5.0.
    the initial download has stopped in between and we get an error "SysFail" in the Inbound queue (SMQ2). Information on this error is "The current application triggered a termination with a short dump"
    when we try to analyze the short dump, it says the termination occured in the ABAP program :SAPLCRM_DOWNLOAD_MAP - in "FILL_BTM_PARTNER". In the source code you have the termination point in line 254  of the include program "LCRM_DOWNLOAD_MAPF37".
    please provide pointers to resolve this issue .
    thanks
    RH

    following is the place where the error is being triggered in the program, any suggestions?
    Information on where terminated                                                                   |
    Termination occurred in the ABAP program "SAPLCRM_DOWNLOAD_MAP" - in                         
    "FILL_BTM_PARTNER".                                                                          |
    The main program was "SAPMSSY1 ".                                                             |
    In the source code you have the termination point in line 254  of the (Include) program "LCRM_DOWNLOAD_MAPF37
    Source Code Extract                                                                               
    Line
    SourceCde
    number_int = <ls_bapisdpart>-itm_number.                                |
      if sy-subrc eq 0.                                                                     |
    ls_btm_partner-ref_guid = ls_item_keys-guid.                                        |
    ls_btm_partner-ref_kind = gc_object_ref_kind-orderadm_i.                            |
    endif.                                                                                |
    endif.                                                                                |
    *orderadm_h_guid
    ls_btm_partner-orderadm_h_guid = ls_orderadm_h-orderadm_h_guid.                         |
    *bp_partner_guid                                                                          |
    if lv_nrart = gc_partner_r3_types-customer.                                             |
    *-----AG, WE, RE, RG, etc.                                                                  |
      call function 'CRM_BUPA_MAP_CUSTOMER_TO_BP'                                           |
    exporting                                                                           |
    iv_customer       = <ls_bapisdpart>-customer                                      |
          importing                                                                           |
    ev_partner        = ls_btm_partner-bp_partner_guid                                |
    exceptions                                                                          |
    partner_not_found = 1                                                             |
    others            = 2.                                                            |
    if sy-subrc eq 0.                                                                     |
    display_type                                                                             |
    s_btm_partner-display_type =                                                       |
                           gc_partner_no_type-business_partner_no.                             |
    no_type                                                                                |
    ls_btm_partner-no_type =                                                            |
    gc_partner_no_type-business_partner_no.                              |
         else.                                                                                |
    if ls_btm_partner-partner_fct = '00000001'.                                         |
    >>>>>
    message x020(crm_order_misc) with gv_logsys_r3.
    endif.                                                                              |
       endif.                                                                                |
      if ls_btm_partner-task     eq gc_bdoc_task-delete and                                 |
      ls_btm_partner-ref_kind eq gc_object_ref_kind-orderadm_i.                          |
    special handling for deleting item partner. In this case the item                         |
    partner must not be deleted but updated with the header partner                           |
      insert ls_orderadm_h-orderadm_h_guid into table lt_header_guid.                     |
    insert gc_object_name-partner into table lt_requested_objects.                      |
    call function 'CRM_ORDER_READ'                                                      |
    exporting                                                                         |
      it_header_guid       = lt_header_guid                                           |
    iv_only_spec_items   = true                                                     |
    it_requested_objects = lt_requested_objects                                     |
    importing                                                                         |
    et_partner           = lt_partner_header                                        |
    exceptions                                                                        |
    others               = 1.                                                       |

  • Error loading transaction data from csv file

    Hello all
    I am getting the following error when loading from a .csv file:
    Error 'The argument '-65.025,60' cannot be interpreted as a number' on assignment field BALANCE record 1 value -65.025,60
    The BALANCE field is defined as : 0D_BALANCE (from the SAP Demo Cubes).
    Any help on this is appreciated.
    TIA

    Thank you all for your help
    I made the changes. I was still getting the error until I had changed one item.
    Under the FIELDS tab, I set the "FORMAT" to "External".
    After doing this, all worked well.
    Thanks again!

  • Error while importing datasource from Dev. to Qlty

    Hi guys,
    I have transported a data source to quality from development system. while importing the same in quality it states error below.
    WSPK901533  imported to WFP & it ended with error(RC=8). Please check.
    Source system ZSTGLDV110 does not exist
    No rule exists
    Source RSDS GECPC_GFO_COD_GPR ZSTGLDV110 does not exist
    Errors occurred during post-handling RS_AFTER_IMPORT for RSDS L
    Please let me know some once has any idea..
    Its too urgent.
    THanks in advance
    Peter

    Hi,
    First check the source system: ZSTGLDV110 is exists or not. check the rfc connections (Also check the source system assignment in both the system to each other). check the settings in the stms tcode. check the suppoet pack on your quality system,.... there are plenty of reasons.
    thanks.

  • ALE'ing master and transactional objects from DEV to TST to PRD

    Experts,
    I did see a lot of posts on the same topic but none happened to be answered completely/they do not answer my query.
    I am looking for a step by step approach/guide to migrate master & transactional  data between SAP environments using ALE/IDOCs
    Thanks in advance

    Figured it out

  • Transport Error from Dev to QA.

    Hi All,
    We r facing transport error while transporting req from Dev to QA,
    Created queries in dev and try to trasport in QA.
    Error:
    Execution of programs after import (XPRA)
    Transport request   : BD1K922532
    System              : BQ1
    tp path             : tp
    Version and release: 372.04.29 700
    Execution of programs after import (XPRA)
    End date and time : 20091022031634
    Ended with return code:  ===> 8 <==
    what could be the reason?
    Regards,
    SD

    Hi.
    I have collected all neccessary object which query contains, but after releasing the request it shows the message,
    The request contains message that have already been edited & transported to other projects. To avoid overshooter problem when importing you need to create dependency information for the request with which object were last transported. The requiered information is listed here together with the existing information.
    Should i go ahed with above message???? Is there any dependency?
    Regards,
    SD

  • Notification about errors during transport from DEV to QAS server.

    Hi Guys.
    Is there any way of alerting the user about the errors that arise when moving the transaction from DEV client to QAS client?
    For Instance,In DEV the program may be working fine and while transporting sometimes errors can arise by not including all the necessary files while moving to QAS server.
    Kind of auto-email facility notifying the user...

    Hi,
    there might be some standard functionality for TMS but if you can't find anything then you can still use BADI CTS_IMPORT_FEEDBACK. The only method if this BADI is called right after import of each transport.
    Cheers

  • RC 8 error while transporting the query from Dev to Qa - Element missing

    Hi All,
    I have made a multiprovider by copying one existing one.
    I have copies one of the Bex queries using RSZC from the source to Target MP.
    While transporting the query from Dev to QA i have got the following error. (I have already moved the Multi Prov in a previous TR) 
    Has anyone seen similar types before. Any inputs will be highly appreciated.
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)     
    Error when activating element 4LUSZK561QN74UDBJ7BPU9GFM                                             
    Element 4LUSZJXHIS1HM7TVDD9DK7HPU is missing in version M                                           
    End of after import methode RS_ELEM_AFTER_IMPORT (Activation Mode) - runtime: 00:00:06                                                                               
    Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)         
    End of after import methode RS_ELEM_AFTER_IMPORT (Delete Mode) - runtime: 00:00:14                  
    Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L                                     
    RS_AFTER_IMPORT belongs to package RS                                                               
    The errors affect the following components:                                                         
       BW-WHM (Warehouse Management)                                                                    
    Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20110517070045              
    Post-import methods of change/transport request BDAK959603 completed                                
         Start of subsequent processing ... 20110517070025                                              
         End of subsequent processing... 20110517070045                                            
    Kind regards,

    Hi Jith,
    First of all try to consolidate all your objects in a single TR and then move to Q from D.
    In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
    Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
    1. Go to your transport Logs and then to the entries marked as Error.
    2. There you will find the Query Element Ids, copy them
    3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
    Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

  • Error while loading Transactional data from NW BW Infoprovider

    Hi,
      I am trying to load the transactional data using the delivered "Transactional data from NW BW Infoprovider" package and getting error message Error occurs when loading transaction data from other cube .
    Below is the transformation file content
    *OPTIONS
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = TAB
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF =
    VALIDATERECORDS=NO
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT= 9999999999999
    ROUNDAMOUNT=
    *MAPPING
    ACCOUNT = 0ACCOUNT
    BUSINESSTYPE = *NEWCOL(NOBTYPE)
    BWSRC = *NEWCOL(R3)
    COMPANYCODE = 0COMP_CODE
    DATASRC = *NEWCOL(R3)
    FUNCTIONALAREA = *IF(0FUNC_AREA = *STR() then *STR(NOFA);0FUNC_AREA)
    GAME = *NEWCOL(NOGAME)
    INPUTCURRENCY = *IF(0CURRENCY = *STR() then *STR(NOCURR) ; 0CURRENCY)
    PROBABILITY = *NEWCOL(NOPROB)
    PRODUCT = *NEWCOL(NOPROD)
    PROFITCENTER = 0PROFIT_CTR
    PROJECT = *NEWCOL(NOPROJECT)
    TIME = 0FISCPER
    VERSION = *NEWCOL(REV0)
    WEEKS = *NEWCOL(NOWEEK)
    SIGNEDDATA= 0AMOUNT
    *CONVERSION
    Below is the Error Log
    /CPMB/MODIFY completed in 0 seconds
    /CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
    /CPMB/CLEAR completed in 0 seconds
    [Selection]
    InforProvide=ZPCA_C01
    TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\R3_TD_P&amp;L.xls
    CLEARDATA= Yes
    RUNLOGIC= No
    CHECKLCK= Yes
    [Messages]
    Task name CONVERT:
    No 1 Round:
    Error occurs when loading transaction data from other cube
    Application: ACTUALREPORTING Package status: ERROR
    Does anyone had this issue before or is there something that needs to be looked in the BW delivered task ?
    ANy Inpout will be appreciated.
    Sanjay

    Hello Guru,
    Currently i am getting below error while loading costcenter master data from BW to BPC.
    Task name MASTER DATA SOURCE:
    Record count: 189
    Task name TEXT SOURCE:
    Record count: 189
    Task name CONVERT:
    No 1 Round:
    Info provider  is not available
    Application: ZRB_SALES_CMB Package status: ERROR
    Anybody can tell me, if i have missed anything ???
    Regards,
    BI NEW
    Edited by: BI  NEW on Feb 23, 2011 12:25 PM

  • Error while transporting Dimension Members from Dev to Quality

    Hi all,
    I am having issue while I am transporting dimension members from dev to QA, The error log is as below; i am not sure what could be wrong;
    Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
    Member formula expanded for imported master data
    Start of data checker messages for Appset XXXX
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Error occurs when checking member formula use on other dimensions
    No access to environment 'XXXX'
    No access to environment 'XXXX'
    BPF: Error reading master data
    No access to environment 'XXXX'
    Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
    UJT_AFTER_IMPORT belongs to package UJT
    The errors affect the following components:
        EPM-BPC-NW-TRA (Transport)
    please advise.
    Thanks.
    Ambika

    hi Raju,
    i tried after giving full access but again same error:-
    please see the error log below:-
    Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
    Member formula expanded for imported master data
    Start of data checker messages for Appset PETFAS
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Possible Dead File/Dir:
    Error occurs when checking member formula use on other dimensions
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    No access to environment 'PETFAS'
    InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
    BPF: Error reading master data
    No access to environment 'PETFAS'
    End of data checker messages for Appset PETFAS
    End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
    Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
    End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
    Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
    UJT_AFTER_IMPORT belongs to package UJT
    The errors affect the following components:
        EPM-BPC-NW-TRA (Transport)
    any suggestion..
    thanks,
    Ambika

  • Error while exporting/transporting the Business system from Dev to Quality

    Hi,
    We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
      404   Not Found
      The requested resource does not exist.
      Details:   Go to main page of this application!
    We have followed the following procedure to export :
    1. opened the business system.
    2. Clicked on export option
    3. tried to download
    then we got the above error message.
    Please provide your precious inputs to resove our problem.
    Thanks
    Ramesh

    Go through the following links for transporting XI objects.
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    ere's a good link for what you are looking.
    Re: Transport design and configuration objects
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Pls reward if useful

  • Transport error from dev to quality

    HI,
    I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
    Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
    Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
    Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
    Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
    Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
    Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
    Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
    Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
    Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
    Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
    Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
    The errors affect the following components:
        BW-WHM (Warehouse Management)
    Post-import methods of change/transport request  completed
          Start of subsequent processing ... 20100409231713
          End of subsequent processing... 20100409231716
    Thanks,
    kranti

    Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
    InfoObject ZCHKNUM is not available in version A
    InfoObject ZCHKNUM is not available in version A
    InfoObject ZCHKNUM is not available in version A
    InfoObject ZCHKNUM is not available in version A
    InfoObject ZCHKDATE is not available in version A
    Inconsistencies found while checking DataStore object ZTCM_D02
    Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
    Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
    The errors affect the following components:
       BW-WHM (Warehouse Management)
    Post-import methods of change/transport request D21K918324 completed
         Start of subsequent processing ... 20091112090953
         End of subsequent processing... 20091112090954
    can u please post complete error message that ur getting
    in the above one the DSO is sent to quality but without infoobjects in Quality
    so the tranport got failed

Maybe you are looking for