Error in Tuxedo process start - SAVEEVENTDATA

My client has following environment- Solaris 5.10, Tuxedo 6.5, Oracle 8i. The client is upgrading to Oracle 11g RAC keeping same version of SOlaris and Tuxedo.
In the new environment, while doing "tmboot -y", the tuxedp process SAVEEVENTDATA is giving following error.
---- Error message start
ORACLE XA: Version 11.2.0.1.0. RM name = 'Oracle_XA'.
071345.22392.0:
ORA-00604: error occurred at recursive SQL level 1
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 55
071345.22392.0:
xaolgn: XAER_RMERR; logon failed. ORA-604.
---- Error message end
The error occurs during the tpopen() in tpsrvinit(). My understanding is tpopen() internally calls xa_open(), which is executing some SQL query or Stored-proc, whihc is giving this error. But I am not able to figure out what exactly is wrong.
OPENINFO for Oracle_XA is defined as: OPENINFO="Oracle_XA:Oracle_XA+Acc=P/dbu/dbu_test+SesTm=0+LogDir=.+SqlNet=STAGE"
I think, this error generally occurs when any value is being assigned to character variable greater than its length.
The same is working okay in the old environment. Do I need to do any specific setting for Oracle 11g RAC?
I will appreciate any help or any pointers in this regard.
Thanks in advance.

Hi,
Are there any enhancements to the data source done lately? Did any transports happen in BW or R3 side related to this chain?
With Regards

Similar Messages

  • TS2529 I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.

    I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
    I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.

    Hi, I disabled the antivirus and the firewall. Same result
    I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
    Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
    My iphone 5 is not jailbroken, and is a factory unlocked phone.
    Any other suggestion?
    Pls help

  • HT201210 I am unable to update my IPhone 4 to the IOS 6.  I managed to back up and transfer  and then when it asked to update I said yes and the sync process starte, left it overnight and it came up with an error if continue you will loose all your data. 

    I am unable to update my IPhone 4 to the IOS 6.  I managed to back up and transfer  and then when it asked to update I said yes and the sync process started, left it overnight and it came up with an error if continue you will loose all your data.  So stopped! Help!

    Are you currently on ios 4?  If so that's where the backup comes in.  You'll need to restore your backup once the software is updated.

  • Hello dps team,  A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again la

    Hello dps team,
    A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again later."
    Is there a problem with our dps version or any maintenance work at the servers from Adobe?
    Best,
    Oliver

    Hi Oliver,
    Please login to your DPS dashboard and contact support by clicking "Contact support" at the bottom left
    Thanks
    Lohrii

  • Process.Start(procStartInfo) error when user cancels

    I'm attempting to allow a product to self-elevate but get an error if the user clicks cancel on the security dialog.
    I've attempted to error trap this, but it doesn't work.
    Dim procStartInfo As New ProcessStartInfo
    Dim procExecuting As New Process
    With procStartInfo
    .UseShellExecute = True
    .WorkingDirectory = ("C:\MyDirectory")
    .FileName = "MyProductName" & My.Settings.VerInfo.ToString & ".exe"
    .WindowStyle = ProcessWindowStyle.Normal
    .Verb = "runas" 'add this to prompt for elevation
    End With
    Try
    Process.Start(procStartInfo)
    End
    Catch ex As Exception
    MsgBox("There was an unexpected problem executing the product as an administrator....blah blah")
    End
    End Try
    I'm getting the error at Process.Start(procStartInfo) if the user happens to not choose to click run for the security dialog. 
    Thanks in advance :-)
    Programming is mostly just a hobby for me :)

    I'm using Visual Studio Express 2012 for Windows Desktop, if that helps.
    Programming is mostly just a hobby for me :)
    I don't know anything about express editions. Or how yours is setup specific to this application. I can not replicate the issue. And it seems as if your Visual Studio is debugging code that is not displayed in the code window. Since when using the TryCatch
    my VS 2012 does not have the same issue. Until I remove the try catch.
    It's almost like your VS is not building the code displayed. But debugging some previous code which doesn't have the try catch.
    Regardless you may want to upgrade to
    Visual Studio Community wth Update 4 which is free. And probably does everything all Visual Studio Express editions can do and whatever some of Visual Studio Professional can do.
    "Download Visual Studio Community for a free, full-featured IDE with powerful coding productivity features, cross-platform mobile development tools for Windows, iOS and Android, and access to thousands of extensions. This edition of Visual Studio
    is available at no cost for non-enterprise application development.
    Sign in to Visual Studio within 30 days with your Microsoft account to synchronize your settings across multiple machines and register your product. "
    Supported operating systems
    Windows 8.1 (x86 and x64)
    Windows 8 (x86 and x64)
    Windows 7 SP1 (x86 and x64)
    Windows Server 2012 R2 (x64)
    Windows Server 2012 (x64)
    Windows Server 2008 R2 SP1 (x64)
    Hardware requirements
    1.6 GHz or faster processor
    1 GB of RAM (1.5 GB if running on a virtual machine)
    20 GB of available hard disk space
    5400 RPM hard disk drive
    DirectX 9-capable video card that runs at 1024 x 768 or higher display resolution
    Additional requirements
    This version of Visual Studio works best with  
    Internet Explorer 10 or higher. If Internet Explorer 10 is not installed on your computer, 
    some features might not work as expected.
    KB2883200 (available through Windows Update) is required
    For Windows Phone development: 
    Windows Phone 8.0 development requires Windows 8.1 (x64) or higher
    Windows Phone 8.1 development requires Windows 8.1 (x86) or higher
    For the Windows Phone emulators, Windows 8.1 (x64) Professional edition or higher, and a processor that supports Client Hyper-V and Second Level Address Translation (SLAT)
    If your computer meets the operating system requirements but does not meet the hardware requirements for the Windows Phone Emulators, the Windows Phone development tools will install and run. However, the Windows Phone 8.0 and 8.1 Emulators will not function
    and you must use a device to deploy or test Windows Phone apps.
    La vida loca

  • HT201210 I received a pop up asking if I wanted to update my software. I accepted and the (long) process started. Then the update "crashed" and I was told an unknown error had occurred.

    I received a 'pop up' asking if I wanted to update the software in my iPhone. As I always accept these messages to keep my phone up-to-date, I accepted.
    A long (25minute) process started, but at the end of it, the process "crashed" saying an unknown error had been encountered!.NOTHING has changed with my computer of my iPhone, so I say this is an Apple problem. I cannot start or use my phone now - all that shows on the screen is the iTunes logo and a connectivity graphic - see attached photo

    Hi Kalaivani Krish18,
    If you are having issues with your iPhone attempting to update, you may want to try the troubleshooting steps in this article -
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Windows Server Service Provider Registry fails to start - error 1067 The process terminated unexpectedly

    Hello experts,
       I have a SBS 2011 Essentials installation that suddenly has an empty dashboard.
    Event viewer:
    APPLICATION LOG - Event ID: 1000 Source: Application Error
    General Description:
    Faulting application name: ProviderRegistryService.exe, version: 6.1.1840.0, time stamp: 0x4d6dafda
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0x80131623
    Fault offset: 0x000007fe958b0717
    Faulting process id: 0xff8
    Faulting application start time: 0x01cf340bce30552f
    Faulting application path: C:\Program Files\Windows Server\Bin\ProviderRegistryService.exe
    Faulting module path: unknown
    Report Id: 0befeb0f-9fff-11e3-852b-d4ae52c1faae
    APPLICATION LOG - Event ID: 1025 Source: .Net Runtime
    General Description:
    Application: ProviderRegistryService.exe
    Framework Version: v4.0.30319
    Description: The application requested process termination through System.Environment.FailFast(string message).
    Message: Unhandled exception in OnStart: System.ArgumentOutOfRangeException: Not a valid Win32 FileTime.
    Parameter name: fileTime at System.DateTime.FromFileTimeUtc(Int64 fileTime)
    SYSTEM LOG -Event ID: 7031 Source: Service Control Manager General Description:
    The Windows Server Service Provider Registry service terminated unexpectedly.  It has done this xx0 time(s).  The following corrective action will be taken in 60000 milliseconds: Restart the service.
    When I try to start this service I get 'error 1067 - The process terminated unexpectedly'. I have checked all dependencies of this particular service and they are all running properly. I've restarted these dependencies, disabled Kaspersky
    protection, restarted the Server a few times to no avail.
    Any ideas? Thank you!

    I had this exact same problem! Thank you so much Robert for posting a link to that script! That is truly an amazing Powershell script.
    I had all the same errors that AK772 mentioned, but I chose to zoom in on a different issue that the script pointed out. When I ran the "Test CA Infrastructure" step it found several errors. When I looked at what the script was doing there it was
    comparing the server certificate thumbprint in the registry (HKLM:\Software\Microsoft\Windows Server\Identity) with the personal certificates (Personal Certificates in the Certificate snap-in using MMC). When I looked through them individually, sure enough
    the thumbprint in the registry didn't exist in my certificate store. I have NO idea how this could have happened!
    However, from there, I changed my Google search criteria and found the following excellent article:
    http://titlerequired.com/2013/04/29/windows-server-2012-essentials-an-error-prevented-the-dashboard-from-opening/
    This told more about that error and showed how to regenerate the certificate identity in the registry. This totally saved me! Once I ran through the steps that he outlines, even though I got a timeout error towards the end, I could see that the certificate
    thumbprint had changed in the registry and now existed in my personal certificate store.
    Once I saw this, I tried going into services and manually starting the stopped "Windows Server Service Provider Registry" service. Sure enough it started right up, no error this time. Finally, I restarted the server so that all of the other dependent
    services would come back up and re-ran the linked script above and everything was perfect.
    Thanks so much for the breadcrumbs in this post and all of your contributions. I hope that this post will equally be able to help someone else through this very troublesome and evasive error!

  • HT4913 Trying to add new macbook air to itunes match. process starts but never succeeds. works for a while then give error  about itunes server.

    Trying to add my new Macbook Air to iTunes match. Process starts but goes nowhere. After some time I get error about iTunes server losing connection. Help! I want to access all my music.

    Hi Rob- I'm guessing it has something to do with all the update stuff Apple keeps doing (with Yosemite, etc.,) extremely frustrating - also whenever I load up iTunes on any of my devices- I am asked to enter my passcode- which I will do- then I am asked to do it 2 or 3 more times - right after the other- crazy how annoying something like that can be- I have looked online for solutions- i.e. close out of the account, reset the passcode- all of it- nothing seems to fix that situation either-  what I have discovered (playing around) is on my iPhone 6+ if I go to settings and turn OFF iTunes match- then turn it back ON- suddenly all the music that wasn't loaded shows up magically- but I had to do that each time I'd update songs in my playlist on the iMac- then go to the iPhone and turn off the match- then turn it back on- almost like it is resetting things-

  • An error occurred when processing the spool request.  (Possibly due to memory problems)

    Hi SAP,
    My backgroud job is failing with log as shown below
    Job started
    Step 001 started (program ZMRS0065, variant SUS
    Step 002 started (program ZDRS0090, variant SUS
    Step 003 started (program ZFRS0305, variant SUS
    Step 004 started (program ZFRS0300, variant SUS
    Access error
    Job cancelled after system exception ERROR_MESSAGE
    An error occurred when processing the spool request.  (Possibly due to memory problems)
    Kindly help out in this issue
    Regards
    Mohammed

    Hello Mohammed,
    Have you seen any error in your SM21 system log and developer trace of spool work process
    during that time?
    The maximum size when create spool is 2GB.Pls also check if you are creating a spool
    larger than it.
    Best Regards
    Jie Bai

  • Process chain Error: This AND process is not waiting for event RSPROCESS

    Hi All,
    I am facing an error in the process chain in PRD.
    Error message: This AND process is not waiting for event RSPROCESS.
    We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
    Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
    It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
    And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
    Thanks in advance,
    Sai Chand.S

    Hi,
    If you did any transports related to that metachain we face similar kind of issues.
    not only the AND process , we need to remove all the process before executing the AND process and create it again.
    It helps you, you said your in production So you should take the proper approvals and do it.
    Regards,
    Yerrabelli.

  • SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

    Hi All,
    I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
    in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
    Any clue why it is happening.
    Thanks Shiven:) If Answer is Helpful, Please Vote

    Hi All,
    Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing. 
    Once I cleared the space, report started working and above error was not displaying. 
    Thanks Shiven:) If Answer is Helpful, Please Vote

  • Error in activesync processing.

    I have configured a DatabaseTableResourceAdapter. When I start doing activeSync on it I am getting the following error. I am pasting the error below.
    This is the error on WSTrace log:
    2006.02.06 10:22:15.187 SourceAdapterThread SIMOT-UtentiInterni DatabaseTableResourceAdapter#poll() Error processing updates null null
    2006.02.06 10:22:15.187 SourceAdapterThread SIMOT-UtentiInterni DatabaseTableResourceAdapter#poll() null null
    2006.02.06 10:22:15.187 SourceAdapterThread SIMOT-UtentiInterni DatabaseTableResourceAdapter#poll() java.lang.NullPointerException
         at java.lang.String.compareTo(String.java:998)
         at java.lang.String.compareTo(String.java:90)
         at java.util.Arrays.mergeSort(Arrays.java:1156)
         at java.util.Arrays.sort(Arrays.java:1080)
         at java.util.Collections.sort(Collections.java:117)
         at com.waveset.view.UpdateViewer.diffAccount(UpdateViewer.java:1038)
         at com.waveset.view.UpdateViewer.refreshChanges(UpdateViewer.java:704)
         at com.waveset.view.UpdateViewer.refreshView(UpdateViewer.java:645)
         at com.waveset.view.UserViewConverter.refresh(UserViewConverter.java:2891)
         at com.waveset.view.UserViewer.checkinView(UserViewer.java:1090)
         at com.waveset.object.ViewMaster.checkinView(ViewMaster.java:708)
         at com.waveset.sync.IAPIUserImpl.submitUpdate(IAPIUserImpl.java:382)
         at com.waveset.sync.IAPIUserImpl.submit(IAPIUserImpl.java:596)
         at com.waveset.adapter.DatabaseTableResourceAdapter.processUpdates(DatabaseTableResourceAdapter.java:1533)
         at com.waveset.adapter.DatabaseTableResourceAdapter.poll(DatabaseTableResourceAdapter.java:1189)
         at com.waveset.adapter.SARunner.doRealWork(SARunner.java:265)
         at com.waveset.task.Executor.execute(Executor.java:157)
         at com.waveset.task.TaskThread.run(TaskThread.java:116) null null
    2006.02.06 10:22:15.188 SourceAdapterThread SIMOT-UtentiInterni DatabaseTableResourceAdapter#poll() Completed poll for SIMOT-UtentiInterni resource adapter. null null
    This is the error on activesync log:
    2006-02-06T10:22:15.184+0100: Error processing updates
    2006-02-06T10:22:15.185+0100: There was an error in activesync processing.
    2006-02-06T10:22:15.186+0100: java.lang.NullPointerException
         at java.lang.String.compareTo(String.java:998)
         at java.lang.String.compareTo(String.java:90)
         at java.util.Arrays.mergeSort(Arrays.java:1156)
         at java.util.Arrays.sort(Arrays.java:1080)
         at java.util.Collections.sort(Collections.java:117)
         at com.waveset.view.UpdateViewer.diffAccount(UpdateViewer.java:1038)
         at com.waveset.view.UpdateViewer.refreshChanges(UpdateViewer.java:704)
         at com.waveset.view.UpdateViewer.refreshView(UpdateViewer.java:645)
         at com.waveset.view.UserViewConverter.refresh(UserViewConverter.java:2891)
         at com.waveset.view.UserViewer.checkinView(UserViewer.java:1090)
         at com.waveset.object.ViewMaster.checkinView(ViewMaster.java:708)
         at com.waveset.sync.IAPIUserImpl.submitUpdate(IAPIUserImpl.java:382)
         at com.waveset.sync.IAPIUserImpl.submit(IAPIUserImpl.java:596)
         at com.waveset.adapter.DatabaseTableResourceAdapter.processUpdates(DatabaseTableResourceAdapter.java:1533)
         at com.waveset.adapter.DatabaseTableResourceAdapter.poll(DatabaseTableResourceAdapter.java:1189)
         at com.waveset.adapter.SARunner.doRealWork(SARunner.java:265)
         at com.waveset.task.Executor.execute(Executor.java:157)
         at com.waveset.task.TaskThread.run(TaskThread.java:116)
    2006-02-06T10:22:15.188+0100: Completed poll for SIMOT-UtentiInterni resource adapter.
    2006-02-06T10:22:15.189+0100: Poll complete.
    2006-02-06T10:22:15.189+0100: SARunner: loop 1
    2006-02-06T10:22:15.243+0100: Started - Error, paused until Mon Feb 06 10:27:07 CET 2006
    2006-02-06T10:23:09.744+0100: Exiting.
    Please help me out regarding this.

    Hi Samson,
    Pls try to send me the activesyc logs for the time this error occurs.
    Also send me the resource adapter (SQL db table adapter) logs and your environment details like
    OS type(solaris/linux/windows),OS Version. machine type(SPARC/x86), app server with version etc.
    I will analyze and try to give a resolution for the same.
    Regards,
    Zebra8
    Edited by: zebra8 on Jan 30, 2008 7:05 AM
    Edited by: zebra8 on Jan 30, 2008 7:07 AM

  • Error in executing Process chain

    Hello friends
    I am getting an error in production while starting the process chain
    ERROR 572 *** CAN'T GET MSG FROM CATALOG: Cannot start Process Chain
    Please let me know if u know the cause of this error.It would be a gr8 help.
    Regards
    Rohit

    Hi,
    Are there any enhancements to the data source done lately? Did any transports happen in BW or R3 side related to this chain?
    With Regards

  • SharePoint List Error :[DataSource.Error] SharePoint: Request failed: The remote server returned an error: (500) Internal Server Error. (An error occurred while processing this request.)

    When I connect to the SharePoint site that contains the lists I need to build my query from , Power Query enumerates the list and displays them in the tool. I can click on the system tables and view the records but any table
    in the list I created returns this  error.
    I can connect fine with InfoPath
    [DataSource.Error] SharePoint:   Request failed: The remote server returned an error: (500) Internal Server   Error. (An error occurred while processing this request.)
    thank you for your help
    Andrew
     

    Hi Andrew. In order for us diagnose this issue, you'll need to capture some network traces using a tool such as Fiddler and share them by sending a Frown.
    To capture a trace using Fiddler, start Fiddler, enable the Tools > Fiddler Options > HTTPS > Decrypt HTTPS traffic option, start the capture, reproduce your issue, then stop and save the capture. You can find more information here.
    Once you've done that, please send a Frown through the Power Query ribbon and attach the traces.
    Thanks,
    Ehren

  • Error while deploying process flow

    hi All,
    i am getting below error while deploying 1 process flow.
    Description : Runtime User : OWBPC Started : 2011-06-02 19:18:06.0
    Name Action Status Log
    None Error ORA-00942: table or view does not exist
    None Error RPE-02053: The Oracle Workflow version cannot be retrieved. This may have been caused by an incomplete or incorrect installation of Oracle Workflow or the schema may not contain an Oracle Workflow repository. Please check the location details, reinstall Oracle Workflow, if necessary and try again
    i added only 1 mapping in process flow and mapping containing both tables in taret schema.
    kindly tell me how to fix it.?
    rgds,
    Pc

    hi..thnx for replying..
    i have already installed owf manager from below location in my pc..
    D:\app\pc\product\11.1.0\db_1\owb\wf\install
    and installation was successful..then too I am getting same error while deploying process flow.. im using oracle 11g.. direct me now plz..
    Edited by: PC on Jun 3, 2011 3:48 PM

Maybe you are looking for