Error in updating benefit plan IT0171...for CE

Hi All,
Presently in SAP, the benefit main assignment for concurrent employee is done using the transaction for benefit workbench.
I need to updated Infotype 0171 for concurrent employee from my Z-program. But here I am facing an eror which is given below:
1. I am change the data for IT0171 using HR_INFOTYPE_OPERATION (eg. CE 40, has 2 assignments pernr 40 and 52). Now the default in the benefit workbench is 40, so when i am changing assignment from 40 to 52, I am passing BENGR and BSTAT from 40 to 52 and trying to update 40 with blank value.
Bt here i am getting error in IT0171 for pernr 40, tht BAREA, BENGR and BSTAT cannot be updated with blank value (whereas the same happens in benefit workbench)
2. I am not able to solve this coz I am using HR_INFOTYPE_OPERATION in my program and this FM is also used in HRBEN00CEWB.
PLease help
Edited by: abhay chauhan on Nov 12, 2008 1:22 PM

Hi,
Try having a look at this document
E-WL: Message From the ISAPI Plugin: "Cannot read 8192 bytes of postData from tmp file" [ID 664043.1]
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=664043.1

Similar Messages

Benefit Error "No Benefit Plans found for Program Grouping"

Hi Experts,
While running Report for Employee Eligibility RPLBEN01 it through an Error Message
"No Benefit Plans found for Program Grouping 1st/2nd"
I have configured 1st and 2nd Program Grouping and maintained respective features also.
Can any body guide me to clear this issue.
Thanks in Advance.
vnk

check this view V_T5UBU whether you have created the record for you plan against your first program grouping and second program grping

Error while updating a plan

Hi,
I have encountered an error while updating a plan. While i update the uplan , the grid gets filled but it throws a message stating
"Maximum Number of Result Blocks has been reached"
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Maximum number of Result Blocks has been reached.
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0xD4]
Error while processing the data for the step 'Grid'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "deposittest created 7/19/2007 5:11:50 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
The data updation stops after the row count 49900.
Please help to resolve this error .
Thanks in advance.
Regards,
Lathika

Hi,
in BAM-Administrator you should rraise Parameter "MaxResultBlocks".
BAM originaly is al licensed Software from Group1 named "Sagent Data Flow".
This may help searching the web.
Greetz,
GOI

Error while updating the plan in Enterprise link

hi
i am getting an error while updating the plan which polls the JMS topic and inserts into the grid.
IMessageSourceReceiver->messageReceive: javax.jms.JMSSecurityException: JMS-232: An invalid user/password was specified for the JMS connection
     at oracle.jms.AQjmsDBConnMgr.checkForSecurityException(AQjmsDBConnMgr.java:916)
     at oracle.jms.AQjmsDBConnMgr.getConnection(AQjmsDBConnMgr.java:601)
     at oracle.jms.AQjmsDBConnMgr.<init>(AQjmsDBConnMgr.java:238)
     at oracle.jms.AQjmsConnection.<init>(AQjmsConnection.java:183)
     at oracle.jms.AQjmsTopicConnectionFactory.createTopicConnection(AQjmsTopicConnectionFactory.java:209)
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:94)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "Untitled, created 3/11/2009 3:56:28 PM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
the username and password that i have given are valid and i have given privileges that were mentioned on the technote to the user. can somebody help me out in resolving this as this is very critical for me right now
Thanks in advance

I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept iPhoto into your Apple ID, do so.
2. Move it out of the Applications folder(it may need to be put into the Trash temporarily), and then see if you can download it for free from its individual product page.
3. Click here and contact Apple.
(116137)

Error while updating budget plan for a user in peoplesoft

Hi All,
We are using peopletools 845 and app 8.8 some users are getting this wl error while updating some transactions in PS find the error below,
Message from the ISAPI plugin:
Cannot open TEMP file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4' for POST of 7328 bytes: GetLastError() 5
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Message from the ISAPI plugin:
Cannot read -1 bytes of postData from tmp file 'C:\WINDOWS\TEMP\_wl_proxy\_post_8500_4': GetLastError() 0
Build date/time: Oct 25 2004
Change Number: 452998
HTTP/1.1 500 Internal Server Error Connection: close Date: Wed, 10 Jun 2009 16:42:27 GMT Server: Microsoft-IIS/6.0 MicrosoftOfficeWebServer: 5.0_Pub X-Powered-By: ASP.NET Content-Type: text/html
Thanks in advance!

Hi,
Try having a look at this document
E-WL: Message From the ISAPI Plugin: "Cannot read 8192 bytes of postData from tmp file" [ID 664043.1]
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=664043.1

Error while updating default media player for audio files??

Ever since I received a replacement iPod Nano for my original through the AppleCare program, I frequently get the following message while syncing podcasts:
"An error occurred while updating the default player for audio file types. You do not have enough access privileges for this operation."
How can I correct this problem?
HP Pavilion zv6000 Windows XP Athlon 64 Processor 4000+

Check out this thread for a possible resolution to your problem: http://discussions.apple.com/message.jspa?messageID=6825681

Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

Hi,
I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
any help in this regard is highly appreciated
Thanks,
Santosh Sutar

Hi Satosh Sutar,
Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
And here is an article about updating apps for Office and menifest schema files in the project for your reference:
How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error -while updating stock in MB1C for make to order (561-E)

Hi all,
I have created a sales order with reference to quotation.
Stock is updating for Quotation number. But i stock should be updated to the sales order number.
When i am updating the stock for this sales order number, its not accepting. Its asking the preceding number.
system shows the following error,
"Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 10000001 and item 000010. Therefore, the settlement and possibly inventory management are carried out using the number of the preceding document.
System Response
This entry is not allowed.
Procedure
Enter the document and the item number of the preceding sales document."
Can anyone tell me how to solve this issue?
Thanks in advance,
Babu

solved

Error when updating Mobile Connect Schedule for Remote Destination

On UCCM ver 8, I'm getting an error everytime I attempt to set the Ring Schedule for Mobile Connect when configuring a Remote Destination.
Error = Update failed. [10612] End user for TimeSchedule and TODAccess must match
This problem seemed to start after we were having an issue with the Remote Destination not working intermittently and we recreated the profile. If I leave the Ring Schedule set for "All the Time" and update, the error does not occur. It only happens when I specify a time. My time settings are Friday only, from 8:30 to 16:30; Time Zone = (GMT-5:00) America/New York.
I do not have any TimeSchedule/TODAccess setup for End Users (that I know of), so not sure where to check this setting if it exists. The phone type for this setup is the 9971 (sip). We have other users using Remote Destination on this same model phone without an issue.

The problem was that the todaccesssetting table was missing an entry for that user's time schedule so it was failing to update. The problem was resolved by simply deleting/recreating the Remote Destination and Remote Destination profile.

Reg: benefit plan-insurance info type

hi ,
when i am trying with inbound certain employee data into sap, some insurance plans gets updated smoothly but some plans not uploaded. when i am working on this error its shows that it purely depend on benefit salary on insurance coverage tab.
my question is how they determine the benefit salary field of the employee.(certain plans its determined automatically for some plans not)
regards
muthuraman.d
Edited by: muthuraman d on Apr 2, 2010 4:24 PM
Edited by: muthuraman d on Apr 2, 2010 5:23 PM

Hi Muthu,
To answer your question.....how is Benefit Salary (BSAL) determined........
A Benefit salary wage type BSAL is needed to calculate the annual salary of the employee for calculations required for Benefit Plans. For Coverage levels and salary groups for cost, contribution, credit and other Benefit calculations, BSAL is required.
This BSAL is estimated by the configuration entries in ITs 0008, 0014, 0015 for the WTs specified in table T539J, for the module (e.g. ANSAL) which has to be assigned to the Benefit salary wage type BSAL in table T511.
And to know as of which date the records are processed, check this definition:
[http://help.sap.com/saphelp_46c/helpdata/en/35/28eb87e8aa5570e10000009b38f983/content.htm]
Hope this helps !!!!
Kumarpal Jain.

Unable to update revenue plan values in Easy Cost Planning

Hi,
Business maintains planned costs and revenues on WBS element using Easy Cost Planning tool. But for one of the WBS element system is not allowing to update/add planned revenue line items.User is able to update the planned costs for this WBS element.
The Legend in Easy Cost Planning screen is Non-Changeable Cost Estimate.
The status of WBS is REL,ACPT(Order Accepted),NSCH(Not Scheduled - Forecast Dates),RESA(Result Analysis Carried out).
We have checked all the business process and all the revenue planning is allowed.
Please guide us on how to resolve this issue.

This is resolved...Select the WBS and click on CLOSE icon to reset the cost estimate. This allows to plan revenues again.

RFC_ERROR_SYSTEM_FAILURE error while updating the sick leave in MSS

Hi Guru ,
We are getting RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal .
Please tell how to resolve this .
Dump part :
Runtime Errors         MESSAGE_TYPE_X
Error analysis
    Short text of error message:
    System error
    Long text of error message:
    Technical information about the message:
    Message class....... "HRTIM00BUFMSG"
    Number.............. 001
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Information on where terminated
    Termination occurred in the ABAP program "SAPLHRTIM00_TMWBUFFER" - in
     "INITIALIZE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 55
    of the (Include) program "LHRTIM00_TMWBUFFERCB5".

When an RFC fails from the portal to an SAP Backend, probably ECC 6.0 in your case, there are a few options that I use to troubleshoot:
      1. Ensure that all your jco's are set up ok, passwords, ect. JCOs do not appear to be the problem here
      2. Have an ABAP programmer review where the RFC is failing on the Backend System
      3. Set up an External Breakpoint in the backend RFC. Step to do this:
               a. Get the Backend UserID of a test portal user that is having this issue.
               b. Ensure that test user has "Debug Display" access in the Backend System
               c. Log into the Backend system, go to SE 37 and display your RFC
               d. Go to Utilities --> Settings --> Debugging in the top menu and add the Test User ID to the "Users" field.
               e. Set an external breakpoint any where you want in the RFC.
               f. Run the Leave request as the test user.
               g. a new SAP GUI screen will popup once it hits the breakpoint. The portal browser will stay frozen until you step thru the ABAP program.
Option 3 may sound like alot at first if you never used it, but if you are responsible for troubleshooting portal issues like this one, it is a skill you must have. You can also have an ABAP resource responsible for external debugging when you come accross issues like these. It helps you see exactly what data is being passed in from the portal and what is happening to cause the error.
Regards,
Tom

.wav error after update

This past week my curve did an automatic update when I plugged it into the manager. Prior to the update I was able to play the .wav files that are emailed to me by my office voicemail system. Now after the update I get an error stated unsupported format. I'm on Sprint.
Anyone know why this error is occurring and how I can get it to play the .wav files again?
Thanks,

Hello,
I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
Upgraded Extensions
Oracle Microsoft Access Browser version 1.1.3.27.66
Oracle SQL Developer - Snippet version 10.1.3.27.66
Oracle SQL Developer version 1.1.3.27.66
Oracle SQL Developer - Reports version 10.1.3.27.66
Oracle SQL Server Browser version 1.1.3.27.66
Oracle MySQL Browser version 1.1.3.27.66
Oracle SQL Developer - Worksheet version 10.1.3.27.66
Oracle SQL Developer - Extras version 1.1.3.27.66
Oracle SQL Developer - SearchBar version 10.1.3.27.66
Oracle SQL Developer - Object Viewer version 10.1.3.27.66
I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
Mark

Error after update Oracle SQL Developer Migration Tools

Hi,
I'm receiving a error after the update of Oracle SQL Developer (v.1.1.3.27.66) to work with mySQL migration tool.
This error appear when it´s restarting:
Exception Stack Trace:
java.lang.IllegalAccessError: tried to access class oracle.ide.net.IdeURLStreamHandler from class oracle.ide.net.URLFileSystem$1
     at oracle.ide.net.URLFileSystem$1.createURLStreamHandler(URLFileSystem.java:87)
     at oracle.ide.boot.URLStreamHandlerFactoryQueue.createURLStreamHandler(URLStreamHandlerFactoryQueue.java:119)
     at java.net.URL.getURLStreamHandler(URL.java:1106)
     at java.net.URL.<init>(URL.java:393)
     at java.net.URL.<init>(URL.java:283)
     at oracle.ide.net.URLFactory.newURL(URLFactory.java:636)
     at oracle.ide.layout.URL2String.toURL(URL2String.java:104)
     at oracle.ideimpl.editor.EditorUtil.getURL(EditorUtil.java:150)
     at oracle.ideimpl.editor.EditorUtil.getNode(EditorUtil.java:122)
     at oracle.ideimpl.editor.EditorUtil.loadContext(EditorUtil.java:91)
     at oracle.ideimpl.editor.TabGroupState.loadStateInfo(TabGroupState.java:950)
     at oracle.ideimpl.editor.TabGroup.loadLayout(TabGroup.java:1751)
     at oracle.ideimpl.editor.TabGroupXMLLayoutPersistence.loadComponent(TabGroupXMLLayoutPersistence.java:31)
     at oracle.ideimpl.controls.dockLayout.DockLayoutInfoLeaf.loadLayout(DockLayoutInfoLeaf.java:123)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:631)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:628)
     at oracle.ideimpl.controls.dockLayout.AbstractDockLayoutInfoNode.loadLayout(AbstractDockLayoutInfoNode.java:614)
     at oracle.ideimpl.controls.dockLayout.DockLayout.loadLayout(DockLayout.java:302)
     at oracle.ideimpl.controls.dockLayout.DockLayoutPanel.loadLayout(DockLayoutPanel.java:128)
     at oracle.ideimpl.editor.Desktop.loadLayout(Desktop.java:356)
     at oracle.ideimpl.editor.EditorManagerImpl.init(EditorManagerImpl.java:1879)
     at oracle.ide.layout.Layouts.activate(Layouts.java:784)
     at oracle.ide.layout.Layouts.activateLayout(Layouts.java:186)
     at oracle.ideimpl.MainWindowImpl$6.runImpl(MainWindowImpl.java:734)
     at oracle.javatools.util.SwingClosure$1Closure.run(SwingClosure.java:50)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:199)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)
Anyone knows why that is happining?
Thanks in advance,
Felipe.
Message was edited by:
felipe.b

Hello,
I get the same error after updating through Help->Check for Updates. I am at version 1.1.2.25 and the update does not change the version number of Oracle SQL Developer (Help->About), it remains at 1.1.2.25 (although if I look in extensions tab, it says: oracle.sqldeveloper 1.1.3.27.66 Loaded, possible bug in displaying version number?). These are the updates applied:
Upgraded Extensions
Oracle Microsoft Access Browser version 1.1.3.27.66
Oracle SQL Developer - Snippet version 10.1.3.27.66
Oracle SQL Developer version 1.1.3.27.66
Oracle SQL Developer - Reports version 10.1.3.27.66
Oracle SQL Server Browser version 1.1.3.27.66
Oracle MySQL Browser version 1.1.3.27.66
Oracle SQL Developer - Worksheet version 10.1.3.27.66
Oracle SQL Developer - Extras version 1.1.3.27.66
Oracle SQL Developer - SearchBar version 10.1.3.27.66
Oracle SQL Developer - Object Viewer version 10.1.3.27.66
I ran the update several times and was able to reproduce the error under a specific condition. If I am connected to a database at the time of the update I get the error. If I am not conneceted at the time of the update I do not get the error.
As stated, by Donal, sql developer seems to get over the problem after restarting itself twice.
Mark

Error in updating benefit plan IT0171...for CE

Similar Messages

Maybe you are looking for