Error in uploading master through LSMW

Hi,
We are uploading customer master through LSMW with flat file in 10 th step (Display Read Data) we are getting error
that - "Data record too long to be imported (0 or >5000)"
we checked length of file also everything is perfect.
So How to resolve this?
Regards,
Akshay

Hello Akshay
Not specialist in this area but want to help you.
1) Review OSS notes:
1066952 - Working with legacy data files in LSMW (Unicode, BOM, FTP)
795072 - LSMW: Error in the display of the READ or CONV file
2) Debug program /SAPDMC/SAP_LSMW_VIEW_READDATA - with breakpoint @ Line # 185. I guess something is going wrong during length to Integer conversion whatever it means.
Error Message: /SAPDMC/LSMW 108.
Good luck.

Similar Messages

  • Error in uploading file in lsmw

    while uploading file in lsmw I am getting an error as
    'File 'C:\cust_errors.txt'does not exist or is currently locked.'
    at the bottom of the screen.
    How to overcome this problem?

    Hi,
    Check if the file is being edited .
    save it and close it.
    Then try to upload from the step "Specify files".
    Regards,
    Hari Kiran

  • Error while uploading master data attributes thru flat file

    while uploading master data attributes thru flat file i am facing the below errow. can nyone let me know plz.
    Error 8 when compiling the upload program: row 227, message: Data type /BIC/CCDEIO_MAT5_ATTR was found in a new

    This just means that you changed the transfer rules/transfer structure and have not refreshed the workbench yet.  The infopackage data hasn't been updated ... this is similar to a datasource update, where you need to replicate to make sure BW knows the latest version. 
    The best way to correct this error is to reload RSA1.  Every time I make a change to the tr/ts, I always run /nrsa1 to refresh the workbench. 
    Brian

  • Error when uploading master data

    Hello everybody...
                                  I m finding an error when uploading the master data (BW 3.5)from a flat file. error is...
    Error 8 when compiling the upload program: row
    227, message: The data type
    /BIC/CCABZRAK_COUN_ATTR was modified
    plz suggest me.....
    Thanks & Regards
    Rakesh Jangir

    Hi,
    There might be two reasons..
    1. In your flat file you have data in lower case .. if you want upper case data also just make change in IO to allow lower case data also..
    2. Close the flat file while loading data...
    Regards,
    viren..

  • Error while uploading data through CSV File

    Dear All,
    While Performing following steps I have encounted error in BW 3.5.
    Step 1. Right-click Source System u2013 demo: flat file, and then select Create InfoPackageu2026.
    Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and
    Step 3. Click the External data tab. Select options as shown in the screen. Enter a file name with a path.(CSV File)\
    While checking the preview I am able to see the values inside CSV file,
    But while Starting the scheduler to upload this data it is displaying following error=>
    Syntax error in template RSTMPLIR, row 0 (-> Long text)
    While checking performance assistant following detail is displayed.
    *Diagnosis
    Field "C_R_D" is unknown. It is neither in one of the specified tables nor defined by a "DATA"   ...
    System response
    The program generation was terminated.
    Procedure
    Correct the template*
    Can you guide how to eliminate this error?
    Points will be rewarded for your contribution
    Regards,
    Purav

    Flat File was in error.

  • Error while uploading ESS through SDM.

    Hi all,
              We are on EP7.0 SP13 .I am deploying the ESS business package through SDM.I deployed  the PCUI_GP 600 SP06 through SDM.It went perfectly.Now I am deploying  the
    ESS 600 SP06.It is aborted in the middle by throwing an error like this.
    starting Deployment of ess/au/addr
    Aborted: development component 'ess/au/addr'/'sap.com'/'MAIN_ERP05VAL_C'/'788071'/'0', grouped by software component 'SAP_ESS'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.6.0.20060920131656''/'0':
    Caught exception during application deployment from SAP J2EE Engine's deploy service:
    java.rmi.RemoteException: Cannot deploy application sap.com/essauaddr.. Reason: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:      com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/essauaddr. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment of ess/au/addr finished with Error (Duration 3266 ms)
    Starting Deployment of SAP_ESS
    Aborted: software component 'SAP_ESS'/'sap.com'/'MAIN_ERP05VAL_C'/'1000.600.0.6.0.20060920131656''/'0':
    Failed deployment of SDAs:
    development component 'ess/au/addr'/'sap.com'/'MAIN_ERP05VAL_C'/'788071'/'0' : aborted
    Please, look at error logs above for more information!
    Deployment of SAP_ESS finished with Error (Duration 2375 ms).
    Any clues please...
    Thanx and Regards,
    Rajesh.A

    Hi,
    please
    - open configtool
    - File > Config Tool Menu
    - Webdynpro > sap.com > tcwddispwda > Propertysheet Default
    There please change DuplicateNameCheckEnabled to false
    first try after change, if still got problem,then restart cluster and then re-try

  • Unknown File Format Error while Uploading file through SFP in Note Implemen

    Hello All,
    I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
    While doing the manual steps given in the attachment; I am getting following error.
    Error occurred when uploading file (unknown file format)
    Message no. FPUIFB068
    Manual step listed in the attachment is given below:
    Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
    a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
    b) Unzip the .zip file
    c) Execute transaction code 'SFP'.
    d) Enter 'Form' as 'HR_INTAXF162006'.
    e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
    f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
    file system.
    g) Save the form and activate the same.
    Please help/suggest.
    Thanks in advance.
    Arti Dobariya

    Hi,
    ADS has to be configured to perform those manual steps.
    Please check the note 1580196 GTS: Error occurred when uploading file
    (unknown file format).
    The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
    Since ADS was not configured in our system; we end up using  the option of running form 16 in SAP Script.
    Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
    Regards,
    Arti

  • Unknown File Format Error while Uploading file through SFP

    Hello All,
    I am implementing SAP Note 1528165 - Form 16: Layout changes for financial year 2010-11 which has few PDF forms to be uploaded.
    While doing manual steps given in the attachment; I am getting following error.
    Error occurred when uploading file (unknown file format)
    Message no. FPUIFB068
    Manual step listed in the attachment is given below:
    Step 6 u2013 Creation of PDF form HR_INTAXF162006_600
    a) Download attached file 'SFPF_HR_INTAXF162006_600.zip' on the local file system.
    b) Unzip the .zip file
    c) Execute transaction code 'SFP'.
    d) Enter 'Form' as 'HR_INTAXF162006'.
    e) Goto menu bar and select the 'Utilities' option and select 'Uploading form' from menu.
    f) Select the file, downloaded in the step u2018bu2019 (SFPF_HR_INTAXF162006_600.XML) from the local
    file system.
    g) Save the form and activate the same.
    Please help/suggest.
    Thanks in advance.
    Arti Dobariya

    Hi,
    ADS has to be configured to perform those manual steps.
    Please check the note 1580196 GTS: Error occurred when uploading file
    (unknown file format).
    The manual steps related to SFP transaction need to be performed if your are running the form 16 in pdf format.
    Since ADS was not configured in our system; we end up using  the option of running form 16 in SAP Script.
    Changes related to SFP transaction need not be perfored in case you are running the form in SAP Script format as these are pdf specific changes.
    Regards,
    Arti

  • Error message uploading book through iTunes Producer

    I'm uploading my ebook to iTunes Producer and when it is verifying assets with the iTunes store, I get the following message: Error: Internal error: java.net.MalformedURLException: unknown protocol: bundle schema/20/rng/opf.rng" at Book (MZItmspBookPackage).
    I've seen others with this problem, but not apparent resolution.
    Please advise.
    Jon
    PS. I'm using iTunes Producer 2.6.

    I think the same error is being discussed here. It's related to the version of Java you have installed on OS X.
    https://discussions.apple.com/thread/3862385?tstart=0

  • Error while uploading COA through DTW Version 2007 B.

    Hi Gurus
    Account type defined for
    Revenue is - at_Revenues
    Expenditure - at_Expenses
    gives error "Invalid Code OACT_acttype(application defined or Object Defined Error 65171)"
    Thanks
    Meena

    Hi Meena.......
                   You should put at_Revenues, at_Expenses to those accounts which come under Active Revenues and Expenditure head respectively But all the Title accounts should be at_Other........
                   Just try it........
    Regards
    Best Rahul

  • Material master creation error through LSMW

    Hi,
    I have a problem with creation material master through LSMW with object type BAPI.  I use below import methods
    Business Object BUS1001006 
    Method                SAVEDATA
    Message Type    MATMAS_BAPI
    Basic Type          MATMAS_BAPI03
    Material number is configured length of 12 with leading zeros.
    In my text file material number is given as XXXXXXXXXXX which is 11 digits. When I start IDoc processing it issues an error message u201CMG019 the numeric material number & was transferred without leading zerosu201D.
    Then I add 0 to material number in the file (it becomes 0XXXXXXXXXXX) and run IDOC processing it issues same error message again.  
    How I can resolve this issue?
    Thanks

    Hi,
    Please check the below link...
    Re: Creating new material using i/b MATMAS IDOC
    and also check the OSS note 707602.
    Hope it may help you.
    Kuber
    Edited by: kuberk on Aug 14, 2011 4:00 AM

  • I have uploaded Material Master thr LSMW but Materials are not saved.

    Hi
    i have uploaded  Material Master through LSMW but unfortunetly Matreials are not saved in system.

    Hi
    Check first with one record you are able to create the material Manually by using tcode MM01.
    Or Rerun the batch Input in Foreground mode so that you can see the error or whether Materila no is created
    I do not think so any test mode in Batch Input session.
    Check the Log in SM35 for your session if you have any error messages.
    Hope it helps
    Karthik

  • Error in Creation of Purchase Requisition through LSMW

    Hi
      I am trying to craete a PR upload prog through LSMW batch input method. In the Specify File option I am giving the TXT file destination.The TXT file is saved at my desktop. But while saving it is givving an error as "No logical path has been specified", Message no. /SAPDMC/LSMW_OBJ_060046
    If anyone can help me out.

    Hi,
    I would suggest to create a new one for this as file is placed on your desktop. But you can refer the standard one with which you will get the idea for creation:
    Standard logical file name for this is: MM_PURCHASING_REQUISITIONS
    In this file location is default in location /usr/sap/trans/data/mmrequisitions, instead of this you can give your converted data file name from step 7 Specify file for e.g PROJECT00_CUTOVER_MB1C_1.lsmw.conv
    You can refer or use standard logical path LOCAL_TEMPORARY_FILES for this scene.
    Hope this solves your problem.
    Regards,
    Brajvir

  • BOM Uploading through LSMW

    Hi Experts,
      I am Uploading BOM through LSMW by Direct Input method. I am having the following queries,
      1.  In that BOM I have Header data and Item data. While doing the Step 7(specify file) it accept the text file only not the Excel file. If I assign the Excel file means while executing the Step 9(Read Data). It gives error message, file and source structure have no fields.
    So I came back to Step 7 and assign the Text file then it is accepting. What is the reason?
    2. Even though It will allow to execute the Read Data steps I am getting the Header data only not getting the BOM Components data. Results data as follows,
    LSM Workbench: Import Data For BOM, BOM, BOM
    19.02.2010 - 14:45:57
    File(s) Read:       C:\Documents and Settings\Administrator\Desktop\BOM Header.txt
                               C:\Documents and Settings\Administrator\Desktop\BOM ITEM.txt
    File Written:         BOM_BOM_BOM.lsmw.read
    Source Structure             Read      Written        Not Written
    BOMHEADER                        2            2                  0
    BOMITEM                              2            0                  2
    Transactions Read:                   2
    Records Read:                          2
    Transactions Written:                2
    Records Written:                       2
    Can any one help me in this regards.
    Regards,
    Muthamil Murugan

    Hi Girish,
      Can you please explain my queries,
      1.  How can I  maintain Source structure like as follows,
    BOM - BOM - BOM Bill of Material Creation
    Source Structures
            BOMHEADER                Bill of Material Header
                BOMITEM                  BOM ITEM DATA
    2.  Just tell me the method of Maintaining source field, why  i am asking you that I enter manually in table maintenance, whether i am right ?
    3. During source structure maintenance for what structure relationship I have to assign source structure.
    4.During field mapping and conversion rule, I got no fields relates to BOM creation, what I did is just directly go to Extras in menu and choose Auto field mapping, am I right just tell me your suggestion in detail.
    5. During specify files execution I got the screen as follows,
    BOM - BOM - BOM Bill of Material Creation
    Files
                Legacy Data          On the PC (Frontend)
                BOM Header          C:\Documents and Settings\Administrator\Desktop\BOM Header.t
                                               Data for One Source Structure (Table)
                                               Separator Comma
                                               Field Names at Start of File
                                               With Record End Indicator (Text File)
                                               Code Page ASCII
                BOM ITEM DATA    C:\Documents and Settings\Administrator\Desktop\BOM ITEM.txt
                                               Data for One Source Structure (Table)
                                               Separator Comma
                                               Field Order Matches Source Structure Definition
                                               With Record End Indicator (Text File)
                                               Code Page ASCII
            Legacy Data               On the R/3 server (application server)
            Imported Data             File for Imported Data (Application Server)
                Imported Data         BOM_BOM_BOM.lsmw.read
            Converted Data           File for Converted Data (Application Server)
                Converted Data      BOM_BOM_BOM.lsmw.conv
                                               Logical Path BOM_BOM_BOM.LSMW.CONV
                                               Logical File BOM_BOM_BOM.LSMW.CONV
            Wildcard Value          Value for Wildcard '*' in File Name
    Can you brief me in details in the above thing If I did any mistake.
    Waiting for your reply,
    Regards,
    Muthamil

  • BOM upload through LSMW

    Hi,
    Can anybody really suggest how to upload BOM through LSMW.
    My specific questions are
    do we require 2 files to upload
    is header and items need to be recorded separately

    Hi ,
    Just my 2cent advise, Why don't you try BDC recording rather than direct input.
    BDC recording is the option that you can choose to perform recording such as CS01.
    TQ.

Maybe you are looking for