Error in workflow: Cannot complete action: Activity could not be read
Hi All,
We have a process with 2 blocks in sequence. (1) Sequential Block and (2) Parallel Block.
(1) Sequential Block
A1>A2>A3-->A4
(2) Parallel Block
a11 || a22 || a33 || a44
I need to go from A2 to parallel block execution.
I have set result state of A2 as terminal so that sequential block ends and parallel block gets executed.
But it ends with error. "Cannot complete action: Activity could not be read."
Has anybody faced similar kind of problem?
Any pointer to this will be much appreciated.
Thanks,
Mehul
Hi
This error comes only if the Next action is not getting the User id to whom it should assign
Check the parameter passing to next action.Also some time mapping will not be done properly.
Edited by: Yogesh Galphade on Apr 1, 2009 1:40 PM
Similar Messages
-
How to handle the exception in GP(Exception : Activity could not be read)
Hi all
we are getting the GP exceptions as 1) "Activity could not be read" 2) "Action has been stopped"
3) error while processing the item can not be displayed
Please let me know how to handle these exceptions in GP .
currently i got some documents in SDN on GP exceptions but those are related to manual exceptions for example if you enterd wrong data in the inputfield then we can handle those exceptions then it will allow to enter the new value but the exceptions which i mentioned above are new it seems
can you please let me know how to handle or solve those 3 exceptions
Thanks
binduHi Shikhil
Thanks for your reply
Please have a look below for exceptions which i am getting in GP and let me know how to handle these exceptions.
1) "Activity could not be read"
2) "Action has been stopped"
3) error while processing the item can not be displayed
if you give any idea/clue how to handle these exceptions then it would be great help to me
Thanks
Sunil -
? I get an Error msg when syncing ipad "The disk could not be read from or written to" when loading photos. Does anyone have any idea how to fix?
You have posted in the Mac forum for problems & questions usting the iTunes store. You will probably find more help in the following forum.
http://discussions.apple.com/forum.jspa?forumID=800 -
Hello,
I'm moving my library to an external hard drive.
I've made sure to use the 'Keep iTunes Media Folder Organized' option when pointing to the new library location.
I select 'File'->'Library'->'Organize Library', I select to 'Consolidate Files', click 'OK' and get ther error message "Copying files failed. The disk could not be read from or written to".
I've read elsewhere that there may be a corrupted file that I need to sequester somehow and perhaps add it back however I'm not certain how I can locate that file because the status window doesn't indicate which file it's attempting to transfer when the error appears.
Any tips?
Thank you,
Greg H
iTunes 10.6.3OK I figured it out!
It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
Very happy to solve this problem after 3 weeks. -
Error "COPYING MUSIC FAILED. The disk could not be read from or written to"
After following the procedurest to move the iTunes music, the computer started whirring away, happily copying and consolidating all the song files to the new target folder.
After copying 68gigs of 130gigs perfectly, it stopped dead and the following iTunes error message appeared:
"COPYING MUSIC FAILED. THE DISK COULD NOT BE READ FROM OR WRITTEN TO"
I am copying to an external LaCie 500g hard disk, and the current music file is split between folders on the laptop and folders and a 2nd external LaCie Hard disk. It did not appear to have any problems copying and consolidating files from both locations, until the error message showed up.
How can I solve this?
I really need to consolidate this music file.
macbook pro Mac OS X (10.4.6)OK I figured it out!
It was a dodgy file....I sorted the file folders by date, and as it turned out within the "compilations" folder there was a CD where only about half the tracks seemed to have been copied over. Could not have identified this simply from the time indicated on the finder folder sort, because there were several CDs copied over in the that same minute.
I went back to the original itunes folder, deleted all the files from that CD in itunes, then also deleted all those files from the original disk and the target disk.
Tried the "consolidate library" again, and it completed nicely. 200megs of music and videos.
Very happy to solve this problem after 3 weeks. -
Application Error Ox6bea400c referenced memory at Ox702b2260 that memory could not be read. This just recently started happening and only appears when I'm shutting down windows.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
Error in Workflow: At least one entry could not be found in object buffer
Hi All,
I am getting an error " At least one entry could not be found in object buffer" every time i try to open the BO in the binding section. I have cleared the buffer, have deleted the binding and BO and added again multiple times. But still the error is coming. Can anyone suggest a solution for this.What system are you on? ECC? CRM?
Are you sure that the object instance exists? -
Im getting an error message when syncing ipad "The disk could not be read or written to"
Help...
hiya!
let's start with this document:
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
love, b -
Cannot complete action when trying to Activate Bug Tracking Modules
I am trying to activate the Bug Tracking Modules feature on a site, and the error message is: Cannot Complete Action.
I have been able to Activate this feature earlier on my site and they still work.
I can activate the Bug Tracking List Instances, but not the modules.
I run WSS30/MOSS with service pack 1
Can anyone help me? - Thanks!
Dump of the log:
07/25/2008 15:27:55.73 w3wp.exe (0x03FC) 0x0674 Windows SharePoint Services General 88jb Medium Feature Activation: Activating Feature 'BugTrackingModules' (ID: '75a0fea7-9d96-4f02-a800-a3512154efcd') at URL http://intranet.virinco.local/projects/xxxx.
07/25/2008 15:27:55.74 w3wp.exe (0x03FC) 0x0674 Windows SharePoint Services General 72ix Medium Not enough information to determine a list for module "Default". Assuming no list for this module.
07/25/2008 15:27:55.78 w3wp.exe (0x03FC) 0x0674 Windows SharePoint Services Database 6f8g Unexpected Unexpected query execution failure, error code 3621. Additional error information from SQL Server is included below. "The statement has been terminated." Query text (if available): "BEGIN TRAN DECLARE @abort int SET @abort = 0 DECLARE @EidBase int,@EidHome int SET @EidBase = 0 SET @EidHome = NULL IF @abort = 0 BEGIN EXEC @abort = proc_NavStructAllocateEidBlockWebId '4106F129-54CB-4710-BC03-3E037EF8698C',2,1002,@EidBase OUTPUT SELECT ? = @EidBase, ? = @abort END IF @abort = 0 BEGIN EXEC @abort = proc_NavStructAddNewNodeByUrl '7E090D89-888E-427A-B4C8-E28E1D972C2C','4106F129-54CB-4710-BC03-3E037EF8698C',1,1002,-1,0,N'projects/qfree/default.aspx',N'Home',NULL,0,0,0,NULL,@EidBase,@EidHome OUTPUT SELECT ? = @abort END IF @abort = 0 BEGIN EXEC @abort = proc_NavStructAddNewNodeByUrl '7E090D89-888E...
07/25/2008 15:27:55.78* w3wp.exe (0x03FC) 0x0674 Windows SharePoint Services Database 6f8g Unexpected ...-427A-B4C8-E28E1D972C2C','4106F129-54CB-4710-BC03-3E037EF8698C',2,0,-1,0,N'projects/qfree/default.aspx',N'Home',NULL,0,0,0,NULL,@EidBase,@EidHome OUTPUT SELECT ? = @abort END IF @abort = 0 BEGIN EXEC proc_NavStructLogChangesAndUpdateSiteChangedTime '7E090D89-888E-427A-B4C8-E28E1D972C2C','4106F129-54CB-4710-BC03-3E037EF8698C',NULL END IF @abort <> 0 BEGIN ROLLBACK TRAN END ELSE BEGIN COMMIT TRAN END "
07/25/2008 15:27:55.78 w3wp.exe (0x03FC) 0x0674 Windows SharePoint Services General 8kh7 High Cannot complete this action. Please try again.
07/25/2008 15:27:55.78 w3wp.exe (0x03FC) 0x0674 Windows SharePoint Services Feature Infrastructure 889y High The element of type 'Module' for feature 'BugTrackingModules' (id: 75a0fea7-9d96-4f02-a800-a3512154efcd) threw an exception during activation: Cannot complete this action. Please try again.
07/25/2008 15:27:55.78 w3wp.exe (0x03FC) 0x0674 Windows SharePoint Services General 72by High Feature Activation: Threw an exception, attempting to roll back. Feature 'BugTrackingModules' (ID: '75a0fea7-9d96-4f02-a800-a3512154efcd'). Exception: Microsoft.SharePoint.SPException: Cannot complete this action. Please try again. ---> System.Runtime.InteropServices.COMException (0x80004005): Cannot complete this action. Please try again. at Microsoft.SharePoint.Library.SPRequestInternalClass.EnableModuleFromXml(String bstrFeatureDirectory, String bstrUrl, String bstrXML) at Microsoft.SharePoint.Library.SPRequest.EnableModuleFromXml(String bstrFeatureDirectory, String bstrUrl, String bstrXML) --- End of inner exception stack trace --- at Microsoft.SharePoint.Library.SPRequest.EnableModuleFromXml(String bstrFeatureDirectory, String bstrUrl, String bstrXML) at Micros...
07/25/2008 15:27:55.78* w3wp.exe (0x03FC) 0x0674 Windows SharePoint Services General 72by High ...oft.SharePoint.SPModule.ActivateFromFeature(SPFeatureDefinition featdef, XmlNode xnModule, SPWeb web) at Microsoft.SharePoint.SPModuleElement.ElementActivated(SPFeaturePropertyCollection props, SPSqlCommand sqlcmdAppendOnly, SPWebApplication webApp, SPSite site, SPWeb web, Boolean fForce) at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionModules(SPFeaturePropertyCollection props, SPSite site, SPWeb web, Boolean fForce) at Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, Boolean fForce) at Microsoft.SharePoint.SPFeature.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, Boolean fF...
07/25/2008 15:27:55.78* w3wp.exe (0x03FC) 0x0674 Windows SharePoint Services General 72by High ...orce) at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, Boolean fForce)Hi i followed (http://blogs.msdn.com/b/sharepoint/archive/2007/02/24/updated-installation-guide-for-the-20-server-admin-application-templates-for-wss-3-0.aspx?PageIndex=6#comments)
(http://www.microsoft.com/downloads/details.aspx?FamilyId=C1039E13-94DA-4D7D-8CAE-3B96FA5A4045&displaylang=en)
this install the
templates correctly,and i goto activate the feature under "Site Administration->Site Feature" page during activation some feature(Bug Tracking
Modules,IT Modules)is not activated showing error "Cannot complete this action.Please try again.Troubleshoot issues with Windows SharePoint
Services" and some feature is already in exist (eventplanning.wsp,endinglibrary.wsp). after this my sharepoint website Home page also
showing this error "Cannot complete this action.Please try again.Troubleshoot issues with Windows SharePoint Services".
Please help me,How to resolve this?
Thanks in advance,vel -
[SOLVED] Pacman "config file could not be read" error during Arch ins
I've been attempting to get Arch setup for a while now, and after having some trouble with partitions, my wireless connecting, and setting up repos and mirrors, which the Wiki helped me solve, I've hit a bigger bump. While updating the system using pacman as the Beginners Guide says to do, I get errors when I try to continue the update process as follows :
btw: I'm typing this on a laptop next to my computer
[root@McArch~]# pacman -Syu
error: config file /etc/pacman.d/core could not be read
error: config file /etc/pacman.d/extra could not be read
error: config file /etc/pacman.d/community could not be read
:: Synchronizing package databases . . .
error: failed to updated core (unexpected error)
error: failed to updated extra (unexpected error)
error: failed to updated community (unexpected error)
error: failed to synchronize any databases
Any tips as to whats going on? I've tried to created said files, and even insert mirrors into the file, like in the /etc/pacman.d/mirrorlist file but this doesn't seem to help
Last edited by Windfinder (2008-09-29 20:43:29)Glad you got it working.
I'm not sure what happened in your install but I just finished using an old 2007.08 iso and pacman first starts out with /etc/pacman.d/core, etc/pacman.d/extra, /etc/pacman.d/community ... etc., but I never had your problem when I did the #pacman -Syu after initial install reboot. The pacman update removes the above mentioned repos and replaces them with a single /etc/pacman.d/mirrorlist. You must have messed up an initial config file somehow as I couldn't get the same errors you got. It looks like you had your /etc/pacman.conf file messed up somehow and when you pointed it to the mirrorlist it could finally work properly. I'll just include my /etc/pacman.conf file and /etc/pacman.d/mirrorlist so you can compare. NB* these are from my x86_64 so for 32 bit machines i686 would replace x86_64 in the files.
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
/etc/pacman.d/mirrorlist
# Arch Linux repository mirrorlist
# North America
# - United States
Server = http://mirror.neotuli.net/arch/$repo/os/x86_64
Server = http://holmes.umflint.edu/archlinux/$repo/os/x86_64
Server = http://archlinux.unixheads.org/$repo/os/x86_64
Server = ftp://ftp.archlinux.org/$repo/os/x86_64
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/x86_64
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = http://mirror.rit.edu/archlinux/$repo/os/x86_64
Server = http://mirror.umoss.org/archlinux/$repo/os/x86_64
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
Well it was an interesting way to kill 30+ minutes. -
Using Keynote '09 on an iMac OS 10.8.4. Two of my students saved a Keynote file then the next day when trying to open received an error message- The document "4b Molly.key" could not be read. The document does not have a valid format. The students are saving correctly. Any ideas how we can retrieve a working file? Why did this happen?
Just tagging on as I encounted this problem this morning. I'm using Mavericks, on MBP (late 2013).
Have both Keynote 5 and 6 - tried to open the file in both, to no avail. I have also tried the renaming of .key to .zip that seemed to work for others with previous OS, but does not fix now. Also tried uploading to iCloud, renaming, redownloading - no fix there either. I've tried to open on iPad and on a different user's iMac - again, get the same error.
It worked yesterday and the day before. It is a large file; however, I realized that from last night to this morning the only different thing I did was that I inserted photos in the keynote deck by drag & drop verses Insert/Choose and wondering if this corrupted the file.
I'm going to hope a fix is out there somewhere and that I don't have to spend hours upon days upon weeks redoing this 98+ page deck.
Any suggestions? -
Service Desk: Pricing data for partner could not be read
Hi all,
I am trying to configure the Service Desk functionality for Service Providers (on EHP1).
I follow the SAP Documentation (SAP Solution Manager: Service Desk for Service Providers) and SLA's made easy in SAP Solution Manager. Also some discussion threads helped me with some steps (I applied e.g. the recommendation from Pricing data for partner 106 could not be read. , but it didn't help).
I am facing some errors related to the CRM part of the configuration.
When I create Service Desk Contract (SLFV) in CRMD_ORDER, the error appears Pricing data for partner xxx could not be read. I checked the setting of BP and I am not able to find the reason, for customer's (sold-to-party) BP the sold-to-party > Sales Area Data the Sales Organization/Distribution Channel/Division are maintained. Which information for pricing is needed and where can it be configured?
Another error - I am sure it is related to the first one - the service contract cannot be determined in the service message (in Item details view under product). The error messages are about sales area/organization, so I suppose there is something wrong with the link Service Contract -> Business Partner definition.
Could you please help me what can cause the error?
Thanks in advance,
VaclavHi Balaji.S,
my problem was solved when I double checked the settings of org structure. That means there must be a consistent setting for sales organization / distribution channel / division in businness partner (tcode BP), organizational model (PPOMA_CRM), product workbench (COMMPR01). The setting must be same for both the sales department of the service provider and the customer's company (I am sorry I am not CRM, so I am following just this simple logic)
In the long text of the error (in CRMD_ORDER) I could see "expected" combination for sales organization / distribution channel / division (message e.g. The access was carried out with sales organization 'O 50000613', distribution channel '01' and division '') -> when the org model was set up everywhere in this way, the contract was automatically filled by the organization data and in the next step the contract could be determined in the service desk message.
Anyway it took some time to find out the correct combination. Deeper CRM knowledge would help me much.
Vaclav -
"disk could not be read from or written to" Sync fails
I have several songs that not only will not sync to the ipad, but rather than just skimping the songs, the sync process stops. The only work around is to remove the offending songs from iTunes.
These include songs that I purchased through iTunes.
Two errors are generated:
First is the "disk could not be read from or written to" error, and then second dialog indicates that file could not be reade or written.
Each of the song files plays fine in iTunes and each syncs fine to iPods and iPhone.
Anyone else getting this or have any ideas about a solution.I'm a little confused that this problem hasn't received more attention. Basically the sync feature is broken and I am unable to complete my sync of my music from iTunes. And I leave for a month trip next week and was hopeful to have it all loaded. Anyone out there got a solution?
-
Copying Music failed. The disk could not be read from or written to.
I just added a server to my home network. It's called "DELLSEVER" and is networked via TCP/IP on a Windows Network. I can copy files to and from it no problem. I created a shared folder on the server with public read/write access and no password called "Music".
I wanted to move my iTunes music folder (~110GB) to the server's Music folder.
I followed the instruction found on this forum and went into iTunes(6.0.4.2) preferences -> Advenced -> Itunes Music folder location -> clicked Change -> selected the directory from the available list -> clicked ok.
Under "iTunes Music folder location" it now says "\\DELLSERVER\Music\iTunes", and clicked ok to close the preferences.
I then clicked Advanced -> Consolidate Library -> Consolidate.
I then get the error "Copying Music failed. The disk could not be read from or written to."
I then tried to manually copy my library from dragging the folded from my PC to the server. That worked fine, but I can't get iTunes to use the server's copy of the music, it keeps going back to my PC's copy.
Please help. I've only got about 30 Meg left on my PC's drive with iTunes and need to relocate my music to the server's drives.
And if it matters, I am Administrator on both my PC and the server.
I also tried de-authorizing my PC just in case. Made no difference.Thanks Katrina. Mapping the folder to a drive letter allowed iTunes to start copying the music across.
Unfortuntely iTunes didn't notice that I manually copied the files across earlier, so it's overwriting them. I'm about two hours into the transfer with about another hour to go, but it looks like it's going to work.
Windows XP Pro -
Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).
Maybe you are looking for
-
Problem while testing a ABAP Web Service
Hello, I'm facing a problem while testing a webservice for the BAPI BUPA_CENTRAL_GET_DETAIL. I have opened the Web Service Home page, and I get no error. I fill in the input values and then when I send the request, I get back an error which says "Aut
-
How do I create Gated Reverb on a snare?
I have a snare. Made an Aux send. On the aux channel i put a reverb (wet signal 100%) then right under the snare i put a gater (threshold all the way up) i can here the reverb when i adjust the gate "hold" parameter. Is this the proper way to do it?
-
Problems in setting the Secondary y-axis caliberation
Hi, I have a Business Graphics (Time-Scatter Graph) Application having 2 y-axis representing the sales volume. I have set the minimum value of the primary y-axis to 0 using the <b>default series</b>, but am unable to set the minimum value of the seco
-
Hi, I have created a table with XMLType column. This XMLType column holds data adhering to the XMP schema http://xmlns.oracle.com/ord/meta/xmp. XMLType column stores metadata for different entites which are differentiated by their entity type. These
-
Whenever I plug my iPod in the computer is comes up with this ..This iPod cannot be used because the Apple Mobile Device Service is not started. - what does this mean, how can i fix it?