Error Installing on virtual host

Hi all,
I try to install (system copy) CRM4.0 virtualized on 2 hosts, node_A (for Central Instance) and node_B (for Database Instance) on one physical box (AIX 5.3, DB2 Version 9.1 Fixpack 2).
For this i use the sapinst parameter SAPINST_USE_HOSTNAME=node_A. The Central Installation went through smoothly. Then i change the physical hostname of my AIX to node_B for the DB-installation, without SAPINST_USE_HOSTNAME.
In the step where i have to define the filesystem where my database export is (Software Package Check) i get this error:
ERROR 2007-11-06 09:18:42
CJSlibModule::writeError_impl()
MUT-03010 Execution of the command "db2 -tvf last_command.sql -r last_command.res -z last_command.out" finished with status TST_ERROR.
I think my installation has problems with cataloging the database in the database catalog...
thanks, günther

Good morning,
sapinst is really weird. In the step where sapinst has to create the database instance (thats the first part of the installation, Central instance installation) i found this in sapinst_dev.log:
TRACE      iax6binstc.cpp:840
           CDB6Instance::executeCommand(iastring, iastring, iastring, ISyslibFactory*)
           lib=iamoddb6 module=CDB6Instance
Executable: /db2/db2dcr/db2_software/instance/db2icrt
TRACE      iax6binstc.cpp:841
           CDB6Instance::executeCommand(iastring, iastring, iastring, ISyslibFactory*)
           lib=iamoddb6 module=CDB6Instance Arguments : -a SERVER_ENCRYPT -s client -w 64 -u db2dcr db2dcr
TRACE      syuxctask.cpp:1293
           CSyTaskImpl::start(bool) lib=iamoddb6 module=CDB6Instance A child process has been started. Pid = 1110170
Explanation: (db2icrt creates db-instance) db2icrt -a SERVER_ENCRYPT -s client -w 64 -u db2dcr db2dcr
===> "-s client" = client installation ?
===> "-w 64" = unknown switch, old one...
Furthermore i have seen that also IBM has some strange entries in their scripts, for example in db2icrt (i installed V9 Fixpack 2)
db2licm -v
9.1
# NAME: db2icrt
1. FUNCTION: db2icrt - creates a DB2 V8 instance.
===> Version 8 ???
Back to your question:
When i run the script with -tvf then the script is able to start the database. but a connect is not possible:
db2start
DB20000I The DB2START command completed successfully.
connect to DCR
SQL1224N The database manager is not able to accept new requests, has
terminated all requests in progress, or has terminated your particular request
due to a problem with your request. SQLSTATE=55032
While he tries to open a connection to the database he forkes alot of db2agents
% db2_ps | grep db2agent | wc -l
200
% db2 get dbm cfg | grep -i agents
Priority of agents (AGENTPRI) = SYSTEM
Max number of existing agents (MAXAGENTS) = 400
Agent pool size (NUM_POOLAGENTS) = 200(calculated)
Initial number of agents in pool (NUM_INITAGENTS) = 0
Back to my assumption:
I guess the root cause has something to do with the uncorrect database instance creation above (central instance). sapinst is not able to create a proper db instance (...client, see above). so i do this step manually. then sapinst cataloges the database:
% db2 list db directory
System Database Directory
Number of entries in the directory = 1
Database 1 entry:
Database alias = DCR
Database name = DCR
Node name = NODEDCR
Database release level = b.00
Comment = Remote database DCR
Directory entry type = Remote
Catalog database partition number = -1
Alternate server hostname =
Alternate server port number =
% db2 list node directory
Node Directory
Number of entries in the directory = 1
Node 1 entry:
Node name = NODEDCR
Comment = TCPIP Node for database DCR
Directory entry type = LOCAL
Protocol = TCPIP
Hostname = sapdcr00
Service name = sapdb2DCR
...so long, günther

Similar Messages

Installing phpMyAdmin using a virtual host

The situation:
Apache services are running (Windows XP SP2).
Virtual host has been successfully created and works both
with Dreamweaver php pages and pages entered directly in the
browser address bar (e.g.
http://mysite/folder/foo.php.
Server root is d:\htdocs.
Sites stored in this server root: d:\htdocs\mysite.
phpMyAdmin folder stored in the server root
d:\htdocs\phpMyAdmin.
My problem:
I have successfully installed MySql and try to configure
phpMyAdmin according to the reccomendations in David Powers
book "PHP solutions". When I start to load the setup php
using the address:
http://phpmyadmin/scripts/setup.php
I am
automatically connected to the internet and this page is
loaded
http://www.phpmyadmin.net/home_page/index.php
I have then manually modified the config.inc.php and stored
in the phpMyAdmin root. If I try to launch phpMyAdmin by
entering
http://phpmyadmin/ the same page is
loaded from the
internet but not phpMyAdmin.
What have I missed and how can I get phpMyAdmin to work
properly?
Paul

David Powers schrieb:
> Have you added phpmyadmin 127.0.0.1 to your hosts file?
Oh no, I should known better ;-) Didn't think of that.
> Have you set up the virtual host definition for
phpmyadmin in httpd.conf?
No, but have done it now. Now I can load phpMyAdmin into my
browser but I am getting the error "Cannot load mysqli
although this extension is in my php5/ext folder and it is
added to config.inc.php
$cfg['Servers'][$i]['extension'] = 'mysqli'; // The
php MySQL extension to use ('mysql' or 'mysqli')
> Quite honestly, though, I don't see any value in
creating a virtual host
> for phpmyadmin in your testing environment. The value of
virtual hosts
> is mainly to enable the use of site-root-relative links.
You don't need
> that for phpmyadmin.
Ok. So having installed the virtual host for phpMyAdmin just
lets me test if its running on my PC? Withougt a virtual
host how can I see if phpMyAdmin works?
Thanks for your help.
Paul

ICal Error: "No virtual host found for iCal Service" - Help!

Trying to set up iCal on OS X Server 10.5.6
Server is up and running and successfully providing web services on its FQDN. Server is not currently used to support network users / services, but as and when it does it will be the Master Opendirectory server.
I have created a couple of test accounts on the server (simply in the Users group) and enabled both for Calendar Access.
I have provided the details of the FQDN on the iCal page, and checked that the default port (8008) has been opened in the firewall.
In web services there is one virtual domain (using name based virtual server) and the default domain in operation. Both appear to be functioning as would be expected.
When I click on 'start service' for iCal, I get this error.
"No virtual host found for iCal service"
I cannot find any information about this in iCal manual, or online documentation. Can anyone here provide pointer to where this information is, or what it means?
Would be most grateful.

Hey there,
See if any of the solutions provided in either of these older threads can steer you in the right direction.
http://discussions.apple.com/thread.jspa?threadID=1201737
http://discussions.apple.com/thread.jspa?threadID=1242823&start=0&tstart=-3
B-rock

No Virtual Host Found

Ok soooo
Like everyone else.. ok like some others here... iCal seems to be a major sticking point with 10.5 Server. I'm not an expert, but have been the server admin for several years now so am kind of learning as I go. Here's what I've done:
1. Clean install of 10.5 "advanced"
2. Updated to 10.5.1
3. Created a few users
4. Created a few groups
5. Have AFP, mail, web, SMB, chat , and half of VPN up and running correctly.
6. When trying to start iCal, I get the error message "No Virtual Host Found"
Most of these posts deal with Open Directory, so I enabled that service, went thru the setup for it, and now OD seems to be working.
But I STILL can't get iCal to start running.
This is a very small office... there is only 1 server, since we are not using it as a NAT, there is no DNS running.
So what am I missing?

Well out of sheer frustration, I once again started from scratch. While both the "Standard" and the "Workgroup" setups seem similar, I opted for the "Standard" setup to start.
I believe the one key element to success is to choose Open Directory as one of the first services to set up... there is a list you check during setup, and Open Directory is one of them.. I checked it, and iCal, and File and Print Sharing, and most likely e-mail as the only services for the server to set up and auto configure for me.
Once that was done, I added a user or two, and things became much clearer.
On 10.5 Clients, go to the Utilities folder, and look for an application called Directory Utility, and launch it.
It's possible that your server may have been found by the client, but if it is, I'd elect to delete it and start afresh just to be sure everything is correct.
For clients INSIDE the office, when asked for the server name or IP address, I entered the IP address of the server, and it went into auto pilot after that, asking me if I wanted it to configure the client computer.... in my case, I checked Yes.
It will then configure the client to use the services you've set up on the server(so, in reality, you may want to wait 'til you have more services up and running).
It asks for your username and password on the server, as well as the password for the client machine. As I understand it, if the client password is different, it will change the password on the server to match(but my password is the same, so can't promise what happens when they are different).
It DID configure both e-mail and iCal to work correctly with the server. In iCal there is a new listing on the left called yourdomain server, and one default calendar there. You can add more if you like.
Once you have several users up and running, in the client iCal prefs, under the Accounts tab, there is a tab for "Delegation". This is were you allow other users to see and /or write to your calendar. Click the "Edit" button, and the rest should be cake. The users must be valid users on the server. Likewise, there is a window showing accounts you can access and the privileges you have there.
In my case, I'm not so much working with others, but am looking for a replacement for the iCal sync function of Dot Mac. I was able to log into my account on the server from a computer at work, one at home, and a laptop. All three reflect changes made on any of the client computers I operate.
(As a note... for the laptop, which is sometimes IN the office and sometimes OUT of the office, as well as the computer at home, in Directory Utility, I used the FQDN of the server. This connects to the server from outside the LAN and works just the same as if I were inside.)
Now if only there was an option of what to publish in the server.... with Dot Mac, I elect to publish only that there is an event.. no name or anything else... this allows clients to see when I'm busy, but not who I'm busy with. Unless I can figure out how the calendar can be seen by anyone on the web, AND I can hide the event info, I'm stuck on Dot Mac.
I WISH I had an answer for the "no virtual host" issue. I did run into a problem with a web site, and found the only way to fix it was to delete the web site entry in the Server Admin, then re-instate it again, and all was well. I'm thinking it MAY be possible to delete the iCal service in Server Admin, save changes, re-start the server, then add the iCal service again.... its possible that will get you around the No Virtual Host message, but since I started over, I can't test to tell you if it will or wont work. I can tell you that there is nothing in the iCal Server Admin that is vitally different that what was there before, so I'm at a loss about the no virtual host message.
Soooo that's my iCal service story. Long, hard, bitter, and difficult. I've said this before, but Apple really need to create some type of "Re-Initialize" server button to put you back with a fresh install, instead of having to re-install it. I've lost track of how many times I've done that with 10.5, and know I had to do it with 10.2, 10.3 and 10.4 as well. For now, I'm on the Standard Setup, but intend to migrate to the Advanced after this seems stable AND I've got a good working copy on a separate drive to go back to should things go haywire. I can say that while I've have had to use Server Admin some(for the firewall for sure), there seems to be no interference between the settings I make in Server Prefs and Server Admin.
Good luck to you all!

SAP LVM 2.0 Provisioned/Cloned Virtual Hosts

Hi All,
Could you please let me know how to define a virtual host in SAP LVM 2.0.
I have configured Virtualization Manager in SAP LVM 2.0 and added the virtual host to SAP LVM 2.0, But I am not able to see configured virtual host cloning screen.
Kindly suggest me on this.
Thanks and Regards,
Prasad

Hi Michael,
Thank you, we have configured virtualization Manager in LVM and host agent is also installed on virtual host.
Thanks and Regards,
Prasad

Virtual Hosts and CF Server Install

CF8
FC8 (yes I know it really has to be RHEL for support)
Apache 2.2.6
I am testing out a new webserver for a client. We are trying
to use apache virtual hosts with a single instance of CF8. This
will just be a few virtualhosts, not a large amount.
After some difficulty with installations and the connector I
was able to get CF8 running with apache. After setting up the
virtualhosts I only could get to the CFIDE directory after adding
it as an alias in the virtualhost config.
If I try to pull up a test cfm file in a virtualhost site CF
reports file not found. Yet it will pull up the administrator site.
I assume thats because the /CFIDE path matches that in the main
webserver root directory.
Can I run a single instance of CF across apache and its
virtualhosts? I know CF is running in the VirtualHosts as its an
error screen from CF. However it just seems like CF is very
confused when it comes to directory paths.

I've been fighting the issue all day long. I was so glad to
come across your post. Unfortunately, there was no answer attached.
:-( I've figured it out in my install. Hopefully it will be of
benefit to you.
Turns out the problem was a permissions error. When
Coldfusion couldn't read my virtualhost's directory it defaulted to
the standard wwwroot. To fix it I did a "chmod -R a+rX
/home/jason/public_html. Then I tried loading the page again and
all was good.

How to Install an APO Livecache on Windows Using Virtual Host Names

Hi,
How to Install Live Cache on windows using Virtual Host names?
we are using SCM 4.0 with live cache build 7.4.3 on two differnt servers.
I have checked the Live cache CD (7.4.3) is with setup.cmd, where as it need use command sapinst.exe SAPINST_USE_HOSTNAME=Virtual hostname.
Please advise.
Thanks
Anil

a possible workaround (that I have no tested) is to temporarily name your server with the same of the virtual name, install. when completed, rename server to original name.
This is not a proven method, but it might work.

How to access Sql Server Express installed on Virtual PC from Host?

I have SQL Server Express 2008 R2 installed on Virtual PC. and on my Host machine i have SQL Server 2008 R2 ( Enterprise Version) installed.
Since Management studio that comes with SQL express does not support SQL profiler, i want to access SQL Server Express from the Host machine’s management studio which has SQL profiler.
But I could access it using VM’s ip address & instance name

Hi lax,
Follow below steps in your Virtual Machine:
1. Allow remote connections to this server
The first thing you want to check is if Remote Connections are enabled on your SQL Server database. In SQL Server 2008 you do this by opening SQL Server 2008 Management Studio, connect to the server in question, right click the server and open the Server Properties.
Navigate to Connections and ensure that Allow remote connections to this server is checked.
2. Protocols for MSSQLServer
The next good thing to check is the SQL Server Network Configuration. Open the SQL Server Configuration Manager, unfold the node SQL Server Network Configuration and select Protocols for MSSQLServer (or whatever the name of your SQL Server instance is). Make
sure that TCP/IP is enabled.
3. The Firewall
If there is still no communication happening between your computer and the remote SQL Server you most likely need to configure your firewall settings.
A good first step is to figure out which port is being used by TCP/IP (and which you need to open in your firewall). You can do this by right clicking TCP/IP and selecting Properties. Click on the tab IP Addresses .
That was easy enough and all there is left to do is to allow inbound TCP/IP traffic on Port 1433 in your firewall. In Windows 7 this works something like this. Open the Control Panel and navigate to Windows Firewall. Click on Advanced Settings on the left hand
side and you should see the Windows Firewall with Advanced Security. Select the Inboud Rules on the left hand side and click on New Rule on the right hand side. This opens the New Inbound Rule Wizard which you can use to allow inbound traffic on Port 1433
for TCP/IP.
For more information, please refer to
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx.
In host machine:
After you have done steps above, you could use the SQL Server Management Studio in the host machine to connect the SQL Server Express R2 in Virtual PC. If you installed a default instance in Virtual PC, you could use VirtualComputerName to login the SQL
Server database engine. If you installed a named instance in Virtual PC, you could use VirtualComputerName\InstanceName to login the SQL Server database engine.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Virtual Hosting Problem - SMTP error, POP is fine

Hi all,
I set up my server with this domain: brandingforces.com
Additionally I did managed it to get 9 other domains running.
Everything is working fine, even webmail and POP.
However, on the virtual hosted domain steinberginc.com, I do get this error:
Cannot send message using the server mail.steinberginc.com
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
I am not sure where the problem might be since other domains are sending fine SMTP.
I did set up all domains in SA-mail-hosting-virtual domains...... I listed them without the WWW.
Each domain has one IP for the nameserver and 1 IP as the mailserver (in machine field)
Can someone help me?

my fault. old email settings on mail were still configured on port 26 instead of 25. What were the old settings from the other server.

Virtual Host Error..

Hi,
i created two virtual hosts and later deleted it and edited the config files also(httpd.conf,mod_odc4j.conf)....now wen i click teh virtual host link in http server in the enterprise manager its giving the following error..please help...what to do next???
An error was encountered while loading page. Entity not found.
Resolution:
Entity not found
Base Exception:
Indexes in DCM Daemon have become out of sync from those of SMI client.
Resolution:
Shutdown and restart the failing SMI clients. If it still does not work, please restart DCM daemon and restart clients.. Base Exception:
Indexes in DCM Daemon have become out of sync from those of SMI client.
Resolution:
Shutdown and restart the failing SMI clients. If it still does not work, please restart DCM daemon and restart clients.

dcmctl updateconfig from $OH\dcm\bin.
EM uses DCM to maintain a copy of the files so yours are out of sync since you haven't made the changes through EM.
If this is a production server be very careful of this ; is this 10.1.2 ?

PHP "Virtual Host" 3/4% Correct, but Still error?

PHP "Virtual Host" Site error Using Dreamweaver
I created a virtual host on my local machine. I am using Apache, php5, and mysql 5. I moved my "wordpress files and
folders" into the root folder for my site. My htdocs looks like this;
<VirtualHost *:80>
ServerName localhost
DocumentRoot "C:/Program Files/Apache Group/Apache/htdocs"
</VirtualHost>
<VirtualHost *:80>
ServerName myvirtualrootfolder.com
DocumentRoot "C:/Program Files/Apache Group/Apache/htdocs/myvirtualrootfolder"
<Directory "C:/Program Files/Apache Group/Apache/htdocs/myvirtualrootfolder">
    Options FollowSymLinks Indexes
    Allow from all
    Order allow,deny
    AllowOverride All
</Directory>
</VirtualHost>
I followed the dynamic dreamweaver setup. Next I see, "This page may have dynamically-related files that can only be
discovered by the server. When I click "Discover", I'm told "my site definition isn't correct." Can anyone help me
please?

>Sorry. I just never get any help here
Really? Doesn't look that way to me:
http://forums.adobe.com/people/buffbill?view=overview
Other than a post from last week, and those you just posted within the past few hours....it looks like you are getting replies. I'm just sayin.

Ias console - HTTP Server - Virtual Host Error

Http server is working, but when clicked on the virtual hosts or server settings, mime settings.. the console shows this error.
An error was encountered trying to retrieve configuration data.
Failed to initialize configuration parameter ApacheMainServer.. Entity not found. Resolution: Entity not found Base Exception: The document returned by plugin "apache" is null, or does not have a root element, or does not properly formatted. Resolution: Check to see if the document is properly constructed. A document should not be null and should contain at least one root element.. Base Exception: The document returned by plugin "apache" is null, or does not have a root element, or does not properly formatted. Resolution: Check to see if the document is properly constructed. A document should not be null and should contain at least one root element.
ANYONE HAVE ANY INFO REGARDING THIS ?

You can find the port usage by executing opmnctl status -l from the command line. This should give you the port usage for each opmn-governed component. In a standard setup, web cache normally runs on port 7777 while Oracle HTTP Server runs on 7778. Alternatively, you can check the httpd.conf for the parameter Listen. This will give you the Oracle HTTP Server port as well.
Did you test with the directive NameVirtualHost added?

How to Fix: Error (10698) The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.

I am unable to live migrate via SCVMM 2012 R2 to one Host in our 5 node cluster. The job fails with the errors below.
Error (10698)
The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.
Recommended Action
Check the cluster configuration and then try the operation again.
Information (11037)
There currently are no network adapters with network optimization available on host.
The host properties indicate network optimization is available as indicated in the screen shot below.
Any guidance on things to check is appreciated.
Thanks,
Glenn

Here is a snippet of the cluster log when from the current VM owner node of the failed migration:
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine Configuration VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine Configuration VMNameHere', gen(0) result 0/0.
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.000020ec::2014/02/03-13:16:07.495 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: Current state 'MigrationSrcWaitForOffline', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: State change 'MigrationSrcWaitForOffline' -> 'Online'
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: Current state 'MigrationSrcOfflinePending', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: State change 'MigrationSrcOfflinePending' -> 'Online'
00000e50.00002080::2014/02/03-13:16:07.510 ERR   [RES] Virtual Machine <Virtual Machine VMNameHere>: Live migration of 'Virtual Machine VMNameHere' failed.
Virtual machine migration operation for 'VMNameHere' failed at migration source 'SourceHostNameHere'. (Virtual machine ID 6901D5F8-B759-4557-8A28-E36173A14443)
The Virtual Machine Management Service failed to establish a connection for a Virtual Machine migration with host 'DestinationHostNameHere': No connection could be made because the tar
00000e50.00002080::2014/02/03-13:16:07.510 ERR   [RHS] Resource Virtual Machine VMNameHere has cancelled offline with error code 10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] HandleMonitorReply: OFFLINERESOURCE for 'Virtual Machine VMNameHere', gen(0) result 0/10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] Res Virtual Machine VMNameHere: OfflinePending -> Online( StateUnknown )
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] TransitionToState(Virtual Machine VMNameHere) OfflinePending-->Online.
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::VetoOffline: (VMNameHere with flags 0)
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::RemoveGroup: (VMNameHere) GroupBeingMoved: false AllowMoveCancel: true NotifyMoveFailure: true
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] VMNameHere: Removed Flags 4 from StatusInformation. New StatusInformation 0
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmGroup::CancelClusterGroupOperation: (VMNameHere)
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GUM] Node 3: executing request locally, gumId:3951, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] moved 0 tasks from staging set to task set. TaskSetSize=0
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmPriorityManager::StartGroups: [RCM] done, executed 0 tasks
00000b6c.00000dd8::2014/02/03-13:16:07.510 INFO [RCM] ignored non-local state Online for group VMNameHere
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GUM] Node 3: executing request locally, gumId:3952, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000018e4::2014/02/03-13:16:07.526 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
No entry is made on the cluster log of the destination node.
To me this means the nodes cannot talk to each other, but I don’t know why.
They are on the same domain. Their server names resolve properly and they can ping eachother both by name and IP.

PHP "Virtual Host" Site error Using Dreamweaver

I created a virtual host on my local machine. I am using Apache, php5, and mysql 5. I moved my "wordpress files and folders" into the root folder for my site. My htdocs looks like this;
<VirtualHost *:80>
ServerName localhost
DocumentRoot "C:/Program Files/Apache Group/Apache/htdocs"
</VirtualHost>
<VirtualHost *:80>
ServerName myvirtualrootfolder.com
DocumentRoot "C:/Program Files/Apache Group/Apache/htdocs/myvirtualrootfolder"
<Directory "C:/Program Files/Apache Group/Apache/htdocs/myvirtualrootfolder">
    Options FollowSymLinks Indexes
    Allow from all
    Order allow,deny
    AllowOverride All
</Directory>
</VirtualHost>
I followed the dynamic dreamweaver setup. Next I see, "This page may have dynamically-related files that can only be discovered by the server. When I click "Discover", I'm told "my site definition isn't correct." Can anyone help me please?

>Sorry. I just never get any help here
Really? Doesn't look that way to me:
http://forums.adobe.com/people/buffbill?view=overview
Other than a post from last week, and those you just posted within the past few hours....it looks like you are getting replies. I'm just sayin.

Installing 2 ssl certificate on one machine with two virtual hosts

Hi,
If you have a managed server in a cluster that has two virtual hosts running
on it how can you intsall the ssl certificates for both virtual hosts, in
the admin console.
any help would be great!

OK....I figured it out.
I was able to set the IPV4 properties on the ones needing filtering to use the IP or OpenDNS as the primary DNS and my server address as the secondary and that works.
I removed OpenDNS forwarder from the server, flushed dns on all machines and so far it's working perfectly. The machines that are not going to be filtered just go through the server for DNS.
Hopefully, after a while it doesn't break down!

Error Installing on virtual host

Similar Messages

Maybe you are looking for