Error Integration B1iSN

Dear good afternoon,
I'm doing an integration scenario from B1iSN SAPB1 to JDBC and I generated the following error message:
com.sap.b1i.xcellerator.XcelleratorException:
XCE001 Nested exception:
com.sap.b1i.bizprocessor.BizProcException:
BPE001 Nested exception:
com.sap.b1i.xcellerator.XcelleratorException:
XCE001 Nested exception:
com.sap.b1i.xcellerator.XcelleratorException:
XCE001 Nested exception:
java.lang.RuntimeException: Invalid call payload :
<SqlStatement xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="urn:com.sap.b1i.adapter:jdbcadapter"
xsi:schemaLocation="urn:com.sap.b1i.adapter:jdbcadapter ../../com.sap.b1i.system.xc/xsd/JDBC_I.xsd"></SqlStatement>
Someone knows why this error is generated
Thank's

ObjectType Receiver's name was wrong xsl file

Similar Messages

ABAP Proxy Error - Integration Builder address not maintained

I intend to use ABAP proxy between R/3 (ECC 6.0) and XI (PI 7.0).
On configuring the relevant connections, I run SPROXY and get the following error:
Integration Builder address is not maintained in the Exchange profile (Connections)
I have created the connx LCRSAPRFC & SAPSLDAPI from R/3 to PI but the connectivity does not work.
On running the reports
SPROX_CHECK_IFR_RESPONSE
SPROX_CHECK_HTTP_COMMUNICATION
SPROX_CHECK_IFR_ADDRESS
SPROX_CHECK_IFR_CONNECTION
My question is:
What is the Program to be used in LCRSAPRFC & SAPSLDAPI? I have used LCRSAPRFC_<sys id of XI server>
and SAPSLDAPI_<sys id of XI server>
Should the XI Integration Builder address be maintained in R/3?
If yes, is there any place where IB address can be maintained in R/3 (I believe there is no such thing as exchange profile in R/3. then how can IB address be maintained in R/3??...pls correct if I am wrong)
If IB address of XI has to be maintained in R/3 then can anyone pls tell me how to do it?

Just recheck the steps with this and come up with doubts then
How do you activate ABAP Proxies?
Regards,
Prateek

R710 error while booting - pcie training error: integrated raid

http://www.ebay.com/itm/Dell-K869T-DW592-PowerEdge-R610-R710-iDRAC6-Enterprise-Express-Remote-Access...
Throw one of those in there. If you need it 1 time, it paid for itself.

I have an r710 and just now booted it for the first time.
First thing it does is check the ram then it looks for the iDRAC card (which I don't have) and then after that is when it displays the error:
pcie training error integrated raid
System halted.
The pcie card I have in the raid slot is the PERC H710 raid card.
The green LED on the card blinks/flickers so I am hoping that's normal for it to do that.
The BIOS version on the R710 is 6.0.7.
This topic first appeared in the Spiceworks Community

ERROR Integration Engine configuration

hi all, i have an error. en sxmb_adm -->Integration Engine configuration y configured next parameters:
rol:Integration Server
corresponding Int. Server: http://<server>:<port>/sap/xi/engine?type=entry
When press in SL buttom, and error occure: No Access to SLD at present.
What should i Do?
Rgds
Message was edited by:
        Rodrigo Pertierra
Message was edited by:
        Rodrigo Pertierra

all RFC ping fine.. when execute TC SLDCHECK i get this:
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id:      SAPSLDAPI_XD0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name:   <server>
port number: <port>
user       : sldduser
Use transaction SLDAPICUST if you wish to maintain the SLD server access dat
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code     4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id:      LCRSAPRFC_XD0
gateway host:
<server>
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section   = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
In transaction SXMB_ADM-->Integration engine configuration , when i do a check get this
Current Configuration (local):
@5F@     Role of Business System: Integration Server
@5F@     Client 200 is Integration Server
@8S\QURL@     Corresponding Integration Server: http://<HOST>:<PORT>/sap/xi/engine?type=sender
System Landscape:
@5C\QErrors@     No access to system landscape at present
r
     Comparison of Current Configuration with System Landscape
@5B\QOK@     Role of Business System: Current Configuration = System Landscape
Message was edited by:
        Rodrigo Pertierra
Message was edited by:
        Rodrigo Pertierra

Internal GUI Error- Integration Process

Hi Experts,
I am facing Internal GUI Error, when creating new Integration Process Object.When i try to create a new Integration Process
object under a new name space,Unexpected Exception message is displaying and also when i try to open already created IP under some other name space same error message is displaying.
In Admistration page i have found a lock for this so i removed the lock and try again same error message is displayed and new lock is created .
Pls,help me resolve this issue.
Regard's
Preethi.

HI,
1. your can do a refresh from the menu itself else use the link http://<host>:<port>/CPACache/refresh?mode=full
2. Also perform full SXI_CACHE refresh.
3. go through swwl transaction if IP there to delete old one and perform full SXI_CACHE refresh.
hope it will work.
regards,
ganesh.

Apex 4.0 import error - integrity constraint (APEX_040000.WWV_FLOWS_FK)

I have a new Oracle Express 10G instance with Application Express 4.0 installed on it. I am trying to import an existing application that has been exported using Application Express. I get this error. How do I fix this?
SQL> connect apex_040000/xxxxxxxxx
Connected.
SQL> show user
USER is "APEX_040000"
SQL> @C:\apex_misc\f41362_app_export_092010.sql
APPLICATION 41362 - REQ Tracker
Set Credentials...
Check Compatibility...
API Last Extended:20100513
Your Current Version:20100513
This import is compatible with version: 20100513
COMPATIBLE (You should be able to run this import without issues.)
Set Application ID...
begin
ERROR at line 1:
ORA-02291: integrity constraint (APEX_040000.WWV_FLOWS_FK) violated - parent
key not found
ORA-06512: at "APEX_040000.WWV_FLOW_API", line 621
ORA-06512: at line 3
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Produ
ction

Hi,
as you say your Apex instance is new - does the workspace you exported the application from exist on your new apex instance? Probably not. You could try to set the appropriate one using the API like this:
exec wwv_flow_api.set_security_group_id(p_security_group_id => apex_util.find_security_group_id(p_workspace => 'XYZ'));This still requires that you already have created the workspace.
Is there a reason why you don't import the application with the workspace import?
-Udo

Error: Integration Builder can not start

Hi,
Before installing SP 12 XI worked fine.
But while deploying with the SDM I got an error when I want to deploy this file "SAPXITOOL12P_5-20000274.SCA".
So when I start the intergration Builder, Web Start shows an error like "Integration Builder can not start?
Can anybody help me??
Thanks.
Regards
Stefan

Hi Shravan,
it is a really big one:
Starting Deployment of com.sap.xi.rwb
Aborted: development component 'com.sap.xi.rwb'/'sap.com'/'SAP
AG'/'3.0.1220050720142859.0000':
Caught exception during application deployment from SAP J2EE Engine's
deploy service:
java.rmi.RemoteException: Cannot deploy application
sap.com/com.sap.xi.rwb.. Reason: Errors while
compiling:D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl10 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1259: cannot resolve symbol
symbol : method getMessageVersions (java.lang.String,boolean)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageVersions( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1350: cannot resolve symbol
symbol : method getVersionDetailsUrl (java.lang.String)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getVersionDetailsUrl( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean ((IntegrationEngineMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationEngineHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationEngineHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationEngineHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationEngineHome {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl11 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean ((IntegrationServerMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationServerHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationServerHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationServerHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationServerHome {
^
24 errors
; nested exception is:
com.sap.engine.services.ejb.exceptions.deployment.EJBFileGenerat
ionException: Errors while
compiling:D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl10 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl10 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1259: cannot resolve symbol
symbol : method getMessageVersions (java.lang.String,boolean)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getMessageVersions( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1350: cannot resolve symbol
symbol : method getVersionDetailsUrl (java.lang.String)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getVersionDetailsUrl( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean result = ((IntegrationEngineMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl10.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean ((IntegrationEngineMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationEngineHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationEngineHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationEngineHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationEngineHome {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:13:
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 is not abstract
and does not override abstract method getLoggingAttributes
(java.lang.String) in com.sap.aii.mdt.server.MessageMonitoring
public class MessageMonitoringObjectImpl11 extends
com.sap.engine.services.ejb.session.stateful.StatefulEJBObjectImplFP
implements MessageMonitoring {
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1112: setRwb(boolean) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setRwb(boolean) in com.sap.aii.mdt.server.MessageMonitoring; overridden
method does not throw
com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setRwb(boolean arg1) throws java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:412: setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringObjectImpl11 cannot implement
setDomain(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoring; overridden method does not
throw com.sap.aii.mdt.api.exceptions.OperationFailedException
public void setDomain(java.lang.String arg1) throws
java.rmi.RemoteException
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:740: getMessageData(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageData( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:786: cannot resolve symbol
symbol : method getMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1092: getLoggingAttributes(java.lang.String) in
com.sap.aii.mdt.server.MessageMonitoringBean cannot be applied to
(java.lang.String,boolean)
result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getLoggingAttributes( arg1, arg2);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1217: cannot resolve symbol
symbol : method hasVersions ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).hasVersions();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1305: cannot resolve symbol
symbol : method getPureMessageList ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getPureMessageList();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1392: cannot resolve symbol
symbol : method getFeedback ()
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean result = ((IntegrationServerMonitoringBean)ctx.getInstance
()).getFeedback();
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/MessageMonitoringObjectImpl11.java:1432: cannot resolve symbol
symbol : method setMaxMessages (int)
location: class
com.sap.aii.mdt.server.integrationserver.IntegrationServerMonitoringBean ((IntegrationServerMonitoringBean)ctx.getInstance
()).setMaxMessages( arg1);
^
D:/usr/sap/XI3/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/EJBContainer/temp/temp1127721952087/com/sap/aii/mdt/server/IntegrationServerHomeImpl10.java:11:
com.sap.aii.mdt.server.IntegrationServerHomeImpl10 is not abstract and
does not override abstract method create() in
com.sap.aii.mdt.server.MessageMonitoringHome
public class IntegrationServerHomeImpl10 extends
com.sap.engine.services.ejb.session.EJBHomeImpl implements
IntegrationServerHome {
^
24 errors
(message ID:
com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of com.sap.xi.rwb finished with Error (Duration 12172 ms)
Can you help me??
Thanks
Regards
Stefan

FRM-41211 SSL Error Integrating with another product

Hi All
Getting the following dreaded error. Seached this and forms forum and tried all things
setting REPORTS_TMP directory
removing the SSO option in reports
Still same error. I tried running reports directly by using the reports url and it works fine.
Any help appreciated.
Rgds
Arvind

We are using reports 10g R2 under linus. ias 10g R2

Error Integrating EWS 2.2 with Windows Phone 8.1 App

Hi,
I am new to Windows Phone development. I have a basic need to access the Exchange Calendar.
I am using Windows Phone 8.1 SDK and Exchange Web Service 2.2 SDK.
As a first step I tried to use the
Microsoft.Exchange.WebServices.Autodiscover
dll to find the end points of the Exchange Server.
However on the first code statement
Microsoft.Exchange.WebServices.Autodiscover.AutodiscoverService
service = new
AutodiscoverService();
It throws an exception –
An exception of type 'System.IO.FileNotFoundException' occurred in Microsoft.Exchange.WebServices.DLL but was not handled in user code
'System.IO.FileNotFoundException' occurred in mscorlib.ni.dll
I further tried some debugging and using Code Analyser I get following warnings –
Microsoft.Exchange.WebServices.dll: warning CS1684: Reference to type 'System.Net.IPAddress' claims it is defined in 'c:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\WindowsPhoneApp\v8.1\System.dll',
but it could not be found.
And
C:\Program Files\Microsoft\Exchange\Web Services\2.2\Microsoft.Exchange.WebServices.Auth.dll: warning MSB3817: The assembly "C:\Program Files\Microsoft\Exchange\Web Services\2.2\Microsoft.Exchange.WebServices.Auth.dll"
does not have a NeutralResourcesLanguageAttribute on it. To be used in an app package, portable libraries must define a NeutralResourcesLanguageAttribute on their main assembly (ie, the one containing code, not a satellite assembly).
I am not sure what the issue is, but when I try the same code it works in a Command Application. There are other errors but not the above ones. It at least executes few statements.
Can someone please help resolve this error and point me to links where I can find sample code with Windows Phone 8.1 implementation?
Thanks in Advance
Nasir

The EWS SDK 2.2 is a regular Desktop .Net DLL and therefore won't work in a WinRT App (CoreCLR). You should however be able to call the WebService directly.

Error integrating OBIEE portlet with WebSphere Portal

Hi
I am trying to integrate OBIEE 10.1.3.4.1 with Websphere Portal.
I perform following steps :
1. Installed OBIEE and created a report at url "http://punitp63969d:9704/analytics/saw.dll?Dashboard"
2. Modified portlet.xml of sawjsr168portlets.war as follows
<preference>
<name>oracle.bi.presentation.sawserver.URL</name>
<value>http://punitp63969d:9704/analytics/saw.dll?Dashboard</value>
<read-only>false</read-only>
</preference>
<preference>
<name>oracle.bi.presentation.portlets.jsr168.reportui.AdminUserName</name>
<value>Administrator</value>
<read-only>false</read-only>
</preference>
<preference>
<name>oracle.bi.presentation.portlets.jsr168.reportui.AdminPwd</name>
<value>Administrator</value>
<read-only>false</read-only>
</preference>
<preference>
<name>oracle.bi.presentation.portlets.websphere.SuperuserSlotId</name>
<value>sawseveradmin</value>
<read-only>false</read-only>
</preference>
where Administrator/Administrator is user-id/password for OBIEE and
sawseveradmin is name of credential vault in WebSphere-Portal.
3. Deployed the war on WebSphere Portal and got portlet disable with following error in log :
WSVR0200I: Starting application: PA_SAWReport
9/4/09 18:42:52:067 IST 000001ff ApplicationMg A WSVR0204I: Application: PA_SAWReport Application build level: Unknown
9/4/09 18:42:52:708 IST 000001ff WebGroup A SRVE0169I: Loading Web Module: SAWReport.
9/4/09 18:42:52:973 IST 000001ff VirtualHost I SRVE0250I: Web Module SAWReport has been bound to default_host:10000,:80,:10002,:10015,:10016,:443,:10023,:10026,:10040,:10035.
9/4/09 18:42:53:130 IST 000001ff ApplicationMg A WSVR0221I: Application started: PA_SAWReport
9/4/09 18:42:59:692 IST 00000037 WebContainer E SRVE0255E: A WebGroup/Virtual Host to handle /searchfeed/myserver/scopes has not been defined.
9/4/09 18:43:26:458 IST 00000037 WebContainer E SRVE0255E: A WebGroup/Virtual Host to handle /searchfeed/myserver/scopes has not been defined.
9/4/09 18:43:50:318 IST 000000a5 ServletWrappe I SRVE0242I: PA_SAWReport [wps/PA_SAWReport] Oracle_Business_Intelligence_Report_View_Portlet: Initialization successful.
9/4/09 18:43:50:521 IST 000000a5 MimeResponseI E com.ibm.ws.portletcontainer.core.impl.MimeResponseImpl getWriter EJPPC0176W: Invalid content type
9/4/09 18:43:50:661 IST 000000a5 ServletWrappe E SRVE0068E: Uncaught exception thrown in one of the service methods of the servlet: Oracle_Business_Intelligence_Report_View_Portlet. Exception thrown : javax.servlet.ServletException: java.lang.IllegalStateException: No content type set.
at com.ibm.ws.portletcontainer.invoker.impl.PortletServlet.doDispatch(PortletServlet.java:369)
Caused by: java.lang.IllegalStateException: No content type set.
at com.ibm.ws.portletcontainer.core.impl.MimeResponseImpl.getWriter(MimeResponseImpl.java:114)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.checkUser(ReportUI.java:852)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doView(ReportUI.java:167)
at javax.portlet.GenericPortlet.doDispatch(GenericPortlet.java:328)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doDispatch(ReportUI.java:1058)
at javax.portlet.GenericPortlet.render(GenericPortlet.java:233)
at com.ibm.ws.portletcontainer.invoker.impl.PortletFilterChainImpl.doFilter(PortletFilterChainImpl.java:128)
at com.ibm.wps.propertybroker.standard.filter.C2APortletFilter.doFilter(C2APortletFilter.java:185)
at com.ibm.ws.portletcontainer.invoker.impl.PortletFilterChainImpl.doFilter(PortletFilterChainImpl.java:120)
at com.ibm.ws.portletcontainer.invoker.impl.PortletServlet.doDispatch(PortletServlet.java:573)
at com.ibm.ws.portletcontainer.invoker.impl.PortletServletCollaboratorChainImpl.doCollaborator(PortletServletCollaboratorChainImpl.java:114)
at com.ibm.isclite.container.collaborator.PortletServletCollaborator.doRender(PortletServletCollaborator.java:68)
at com.ibm.ws.portletcontainer.invoker.impl.PortletServletCollaboratorChainImpl.doCollaborator(PortletServletCollaboratorChainImpl.java:105)
at com.ibm.ws.portletcontainer.rrd.RRDServerPortletServletCollaborator.doRender(RRDServerPortletServletCollaborator.java:123)
at com.ibm.ws.portletcontainer.invoker.impl.PortletServletCollaboratorChainImpl.doCollaborator(PortletServletCollaboratorChainImpl.java:105)
at com.ibm.ws.portletcontainer.cache.CacheCollaborator.doRender(CacheCollaborator.java:92)
at com.ibm.ws.portletcontainer.invoker.impl.PortletServletCollaboratorChainImpl.doCollaborator(PortletServletCollaboratorChainImpl.java:105)
at com.ibm.wps.pe.pc.waspc.core.impl.PortletServletCollaboratorImpl.doRender(PortletServletCollaboratorImpl.java:156)
at com.ibm.ws.portletcontainer.invoker.impl.PortletServletCollaboratorChainImpl.doCollaborator(PortletServletCollaboratorChainImpl.java:105)
at com.ibm.ws.portletcontainer.invoker.impl.PortletServlet.doDispatch(PortletServlet.java:273)
... 219 more
Please help me resolve this issue.Thanks in advance.

I'm getting the same error on WebSphere 6.1.5. Is there any solution for this?

Error integrating publisher and BI

Hi all!
I'm trying the 11g version of BI. We want to separate the security of Publisher and Analytics: in Publisher the users log with LDAP. This is ok, because users can log perfectly in both places. The problem is when we try to do one report in Publisher. The next error appears:
No input xdo file path is specified
And we can't, for example, create a data model from Answers because the catalog appears empty.
What's happening?? What does that error mean?
Thanks in advance

Hi ,
I am experiencing the same problem.
From the Application Roles;
First , I created a role like 'XMLP_ADMIN'.
ThenI gave authenticated-role to the XMLP_ADMIN
When I do like this I can handle my problem.I hope this helps...

XI Error - Integration Scenario Configurator

When running Step 2 - Assign Services, I choose my Business Service and then Click on Assign, I receive the following error:
An assignment to a business service must be defined for each business system service. Unassigned business system services exist. These can be removed automatically.
Has anyone seen this and please detail to me what you did to resolve it? We are trying to implement E-Recruiting in this particular scenario.
Thank you!
John

Hi John,
First of all are you doing B2BScenerio,If not in A2A scnerio we can not use Bussiness service.Only Bussiness systems has to be used and you can only assign Bussiness system.
**Reward if helpfull**

OPM Error: Integration Object Mapping Report

I am trying to generate IO mapping report in OPM.
but when i try to import data maaping XML in OPM it gives me follwoing wierd error:
"Could not load file or assembly "oracle.determinations.siebel.IO, version=10.4.1,culture=neutral"
here is what i did.
took the OPA Datamodel and created mapping IO in siebel and exported the mapping XML.
then used OPM to generate the mapping report using mapping XML.
thanks in advance for help

920877 wrote:
"Could not load file or assembly "oracle.determinations.siebel.IO, version=10.4.1,culture=neutral"
It looks like you are tying to load the siebel plugin (which contains the IO Mapping tool) into an incompatible version of OPM. You should make sure that the OPM plugins comes from a Siebel Connectior for OPA install which is the same version as your OPM.
The Siebel plugin files (in case you need to replace them) should be in *Program Files (x86)\Oracle\Policy Modeling\Plugins*

Errors integrating ABap system in SLD and PI

Dears,
I need informations about how to include an Abap system to the SLD , installaed on a different machine, and to make it available for the communication with a PI system.
It's a silly question but I'm quite confused about the step should be performed. I partially did the integration following the documentaion in my knowledge, but something is missing.....and does not works.
regards

Hi refer these links
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40328fc8-4844-2b10-b7a2-8930c16df2ba
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00462bb-b7a0-2a10-8da6-f6b89834f8b4
regards,
Surya

Error Integrating BOE via KM in Portal : Connection Refused

Hi
I am following the steps outlined on http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrateBOEXI3.1intoaKMNavigationintoSAPEP+portal in order to integrate BOE content into the portal via KM iViews.
I create the repository, and it shows up in the KM Content area, but as soon as I click on it, I get the following error:
java.net.ConnectException: Connection refused
I check the default trace file from NWA, and there are a bunch of error messages, starting with this one:
com.sapportals.wcm.repository.ResourceException: Invalid root sid. It must be an Integer representing the SI_ID on CMS.
I have used the default ID (23), which corresponds to the ID of the root folder in BOE. I have also tried using the ID of another folder, still with the same error message.
I have checked the security settings on the folder(s), and the user group Everyone has Full Access, so I don't think it is an access problem.
Any ideas on how I can get this working?
Cheers,
Andrew

Hi Andrew
Have you find a solution?
br
Murat

Error Integration B1iSN

Similar Messages

Maybe you are looking for