Error interpretation

Hi All,
Would anyone please give me an interpretation for the below errors?
error #1:
Protocol: SMTP, Server Response: '450 4.3.1 insufficient free queue space available', Port: 25, Secure(SSL): No, Server Error: 450, Error Number: 0x800CCC78
is the above related to a hard disk problem?
error #2:
Reason: Rejection greeting returned by server.
Diagnostic code: smtp;550 4.4.1 company.net Unable to contact destination
Thanks alot,
Lewis

Hi,
Lewis_SUN wrote:
Diagnostic code: smtp;550 4.4.1 company.net Unable
to contact destination Remote system: dns;mail.company.com
(TCP|192.168.5.44|46774|213.42.236.166|25) (4.4.1
company.net Unable to contact destination)
Is this an error that i should look from my server, or it is just an error determined by the destination one?This is the error returned by the destination server 213.42.236.166.
If this is actually your server then you can investigate further. If not then you need to contact the owner of this server. The easiest way to do this is to get the person who was attempting to send the email to the address that was rejected to contact that recipient through some other means (e.g. phone, another email address) and get them to tell their local IT support staff about the problem.
And what might be the cause?Your guess is as good as mine.
Might there be any thing that i have to configure from my server side?There may be - but first you need to know why the email was rejected. The only person who can determine this is the owner/maintainer of the destination server.
Regards,
Shane.

Similar Messages

Sapgenpse error - interpreter not found

HP-UX IA64: 11.23
SAP: NW 7.0 SR3
Libsapcrypto.so version hpia64-11.23-64
Hi,
I have two HP-UX 11.23 servers and I am trying to activate SSL on these. On one of the servers with SAP WebAS 7.0 SR2, its works fine and libsapcrypto.so loads fine. On this server, I can also execute ./sapgenpse -h to take a look at the options available.
On the other server with SAP WebAS 7.0 SR3, when I execute ./sapgepnse -h, I am getting error:
interpreter "*******************
" not found
exec(2): could not load a.out
When I copied the SSL files initially, there were permission errors which I resolved through changing both sapgenpse and libsapcrypto.so to 777. Now, upon starting SAP system, it just hangs at the stage where it tries to load the SSL library. I then shutdown the server and tried executing sapgenpse separately but am getting the above-mentioned error.
Can anyone suggest what I might be missing here.
Regards

On the server where libsapcrypto works fine, I can issues ldd command to see
ldd libsapcrypto.so
libpthread.so.1 => /usr/lib/hpux64/libthread.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
But on the machine where I can run sapgenpse, ldd gives an out of memory error. Can you propose what I should be looking at to address this issue?
Thanks and regards

Error interpreting the mail server response in Messenger Express

Background:
Migrated from Sparc running iMS 6.0 to Linux running iMS 6.3 (from CommSuite 5)
Problem:
Some users, some times experience problems using Messenger Express. They receive the following error in their web browsers: Error interpreting the mail server response.
Attempted solutions:
1) 120230-20 -- no change in behavior
2) reconstruct -r -- didn't fix the issue
3) Support case with Sun -- tech seems to be guessing as a solution and not trying to troubleshoot the issue (growing frustration -- those I am here)
Data gathered:
I turned on the telemetry logging for this user and in the end of the imap session, I see:
0.002>)F OK Completed
<30.747<C UNSELECT
0.003>C OK CompletedNETWORK ERROR: Connection reset by peer
LOGOUT <username> 2007/7/17 8:46:07 - 2007/7/17 8:48:15
This seems to come and go (working sometimes and not working others) for a few (5 or so) users, though, I haven't found any correlation between the users or how they differ from anyone else. Checking email via POP or IMAP works fine (just not via Messenger express).
What else can I look at?

Hi,
Shane...thank you so much. <refrains from bashing Sun
Support at this point>I should point out that myself and Jay are also Sun Support (we answer forum questions in our spare time).
We have a valid support contract and the tech has
never indicated that he has done any research into
this issue -- he only keeps throwing out ideas based
off of nothing. I asked him what he knows about the
mentioned bug. awaiting response.I couldn't comment on this without looking at the case notes.
<pushing my luck> Is there anything I can provide you
which would help diagnose this? Based off of the
logs (snips i provided u before), it does indeed
seem to be related to the email
headers...specifcially headers SpamAssassin added.What's the Sun support case #? Have you provided the full logs (rather then just snips) to the support engineer?
Thanks again -- you're doing a great job.All part of the service.
Regards,
Shane.

Trace file errors interpretation

We are running Oracle 11.2.0.3 on a Windows 2008 R2 Server with an app server on the same. Our app has a search function that has recently started timing out on us. Sometimes intermittently but often now. I've ran a trace in our dev environment, below code, in an attempt to track down the issue but I'm finding very little useful information in relation to the errors I see in the trace file below. My experience in deciphering trace code is nill so I was hoping there would be someone out there who could elaborate a little on how they interpret these errors or provide a resource so I could do so myself. I appreciate any help provided.
*** 2013-04-18 14:27:23.353
*** SESSION ID:(3093.63097) 2013-04-18 14:27:23.353
*** CLIENT ID:() 2013-04-18 14:27:23.353
*** SERVICE NAME:(SYS$USERS) 2013-04-18 14:27:23.353
*** MODULE NAME:(w3pw.exe) 2013-04-18 14:27:23.353
*** ACTION NAME:() 2013-04-18 14:27:23.353
ERROR #532357120:err=1013 tim=1395332943283
=====================
PARSING IN CURSOR #532354152 len=911 dep=2 uid=66 oct=47 lid=66 tim=1395332944838 hv=4132741411 ad='2a92d9d60' sqlid='27dnt1rv59893'
declare
     sel number;
     arg0 VARCHAR2(1) := null;
    begin
      :1 := "CTXSYS"."TEXTOPTSTATS".ODCIStatsSelectivity(
                     sys.ODCIPREDINFO('CTXSYS',
                            'CTX_CONTAINS',
                            'TEXTCONTAINS',
                            32),
                     sel,
                     sys.ODCIARGDESCLIST(sys.ODCIARGDESC(3, NULL, NULL, NULL, NULL, NULL, NULL), sys.ODCIARGDESC(5, NULL, NULL, NULL, NULL, NULL, NULL), sys.ODCIARGDESC(2, 'MV$SEARCH', 'CIPS', '"NAME"', NULL, NULL, NULL), sys.ODCIARGDESC(1, NULL, NULL, NULL, NULL, NULL, NULL)),
                     :3,
                     NULL
                     , arg0, :4,
                     sys.ODCIENV(:5,:6,:7,:8));
      if sel IS NULL then
        :2 := -1.0;
      else
        :2 := sel;
      end if;
      exception
        when others then
          raise;
    end;
END OF STMT
PARSE #532354152:c=0,e=75,p=0,cr=0,cu=0,mis=0,r=0,dep=2,og=1,plh=0,tim=1395332944836
CLOSE #470004032:c=0,e=21,dep=3,type=1,tim=1395332945763
EXEC #532354152:c=0,e=1279,p=0,cr=9,cu=0,mis=0,r=0,dep=2,og=1,plh=0,tim=1395332946378
ERROR #532354152:err=1013 tim=1395332946406
ERROR #532979664:err=1013 tim=1395333014987
ERROR #548803376:err=1013 tim=1395333015201

We ran a .NET trace on the Oracle client and got the below. The main issue is: "OpsSqlExecuteReader(): RetCode=-1"
TIME:2013/04/19-10:07:16:569 TID:116c OpsSqlPrepare2(): SQL: Begin SELX_MV$SEARCH.GET(:v0, :v1, :v2); End;
TIME:2013/04/19-10:07:16:569 TID:116c (ENTRY) OpsPrmAllocOpoPrmCtx()
TIME:2013/04/19-10:07:16:569 TID:116c (EXIT) OpsPrmAllocOpoPrmCtx(): RetCode=0 Line=258
TIME:2013/04/19-10:07:16:569 TID:116c (ENTRY) OpsPrmFillOpoPrmCtx()
TIME:2013/04/19-10:07:16:569 TID:116c (ENTRY) OpsConAddRef(): (4fc8dc0)=0
TIME:2013/04/19-10:07:16:569 TID:116c (EXIT) OpsConAddRef(): RefCount=23 RetCode=0 Line=2597 (4fc8dc0)=0
TIME:2013/04/19-10:07:16:569 TID:116c (EXIT) OpsPrmFillOpoPrmCtx(): RetCode=0 Line=540
TIME:2013/04/19-10:07:16:569 TID:116c (EXIT) OpsSqlPrepare2(): RetCode=0 Line=500
TIME:2013/04/19-10:07:16:569 TID:116c (ENTRY) OpsSqlExecuteReader(): (4fc8dc0)=0
TIME:2013/04/19-10:07:16:569 TID:116c (ENTRY) OpsDecGetValCtxFromInteger()
TIME:2013/04/19-10:07:16:569 TID:116c (EXIT) OpsDecGetValCtxFromInteger(): RetCode=0 Line=833
TIME:2013/04/19-10:07:16:569 TID:116c (ENTRY) OpsSqlAllocCtx(): (4fc8dc0)=0
TIME:2013/04/19-10:07:16:569 TID:116c (EXIT) OpsSqlAllocCtx(): RetCode=0 Line=128 (4fc8dc0)=0
TIME:2013/04/19-10:12:16:492 TID: dc (ENTRY) OpsErrAllocCtx(): (4fc8dc0)=0
TIME:2013/04/19-10:12:16:492 TID: dc (EXIT) OpsErrAllocCtx(): RetCode=0 Line=197 (4fc8dc0)=0
TIME:2013/04/19-10:12:16:539 TID:116c (ENTRY) OpsSqlFreeCtx()
TIME:2013/04/19-10:12:16:539 TID:116c (EXIT) OpsSqlFreeCtx(): RetCode=0 Line=153
TIME:2013/04/19-10:12:16:539 TID:116c (ENTRY) OpsSqlFreeCtx()
TIME:2013/04/19-10:12:16:539 TID:116c (EXIT) OpsSqlFreeCtx(): RetCode=0 Line=153
TIME:2013/04/19-10:12:16:539 TID:116c (EXIT) OpsSqlExecuteReader(): RetCode=-1 Line=612
TIME:2013/04/19-10:12:16:539 TID:116c (ENTRY) OpsTraceGetLastErrorCode()
TIME:2013/04/19-10:12:16:539 TID:116c (EXIT) OpsTraceGetLastErrorCode(): RetCode=0 Line=1425
TIME:2013/04/19-10:12:16:555 TID: dc (ENTRY) OpsTraceCreateMiniDump()
TIME:2013/04/19-10:12:16:555 TID: dc (EXIT) OpsTraceCreateMiniDump(): None created: TraceLevel=0 Line=1342
TIME:2013/04/19-10:12:16:586 TID:116c (EXCPT) Lvl0: (Type=System.Threading.ThreadAbortException) (Msg=Thread was being aborted.) (Win32Err=0) (Code=e0434f4d) (Stack=   at Oracle.DataAccess.Client.OpsSql.ExecuteReader(IntPtr opsConCtx, IntPtr& opsErrCtx, IntPtr& opsSqlCtx, IntPtr& opsDacCtx, IntPtr& opsReaderErrCtx, IntPtr opsSubscrCtx, Int32& isSubscrRegistered, Int32 bchgNTFNExcludeRowidInfo, Int32 bQueryBasedNTFNRegistration, Int64& query_id, OpoSqlValCtx*& pOpoSqlValCtx, String pCommandText, OpoDacValCtx*& pOpoDacValCtx, IntPtr[] pOpoPrmValCtx, String[] ppOpoPrmRefCtx, OpoMetValCtx*& pOpoMetValCtx, Int32 NoOfParams)
   at Oracle.DataAccess.Client.OracleCommand.ExecuteReader(Boolean requery, Boolean fillRequest, CommandBehavior behavior))Edited by: slas on Apr 19, 2013 12:19 PM

OC4J Log Error Interpretation

Hi, I am trying to debug an authentication issue using a system based on the information in this article: http://www.oracle.com/technology/products/jdev/howtos/1013/oc4jjaas/oc4j_jaas_login_module.htm
IE database/datasource based authentication.
I am getting the following error in the applications OC4J log every time a login attempt is made, no error is seen from the application, authentication simply fails.
When I had the recommended code for fine logging in the j2ee-loggin.xml file (<logger name="oracle.j2ee.security.oc4j" level="FINE" useParentHandlers="false">
<handler name="oc4j-handler"/>
<handler name="console-handler"/>
</logger>) there was no information at all recorded in the OC4J log, not until I removed the extra logger code from that file did entries such as the following begin appearing in the log file. What could be going wrong here? Why is the login process generating a null pointer error and why would the log file not be written too when the fine logging code was added to the config file? Any idea's? All I can really gain from this error message is that the DBTableOraDataSourceLoginModule is at some stage atleast being referenced or called.
Log Message: September 3, 2007 10:59:51 AM EST
Component Name OC4J Component ID j2ee
Host Network Address 172.etc Message Level 1
Module ID security User ID SYSTEM
Execution Context ID 172.etc Execution Context Sequence 0
Host Name usatl01 Thread ID 12
Message Type Warning
Message Text
java.lang.NullPointerException
at javax.naming.InitialContext.getURLScheme(InitialContext.java:228)
at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:277)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule.performDbAuthentication(DBTableOraDataSourceLoginModule.java:484)
at oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule.login(DBTableOraDataSourceLoginModule.java:335)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at oracle.security.jazn.oc4j.OC4JUtil.doJAASLogin(OC4JUtil.java:241)
at oracle.security.jazn.oc4j.GenericUser$1.run(JAZNUserManager.java:818)
at oracle.security.jazn.oc4j.OC4JUtil.doWithJAZNClsLdr(OC4JUtil.java:173)
at oracle.security.jazn.oc4j.GenericUser.authenticate(JAZNUserManager.java:814)
at oracle.security.jazn.oc4j.FilterUser.authenticate(JAZNUserManager.java:1143)
at com.evermind.server.http.EvermindHttpServletRequest.getUserPrincipalInternal(EvermindHttpServletRequest.java:3601)
at com.evermind.server.http.AJPHttpServletRequest.getUserPrincipalInternal(AJPHttpServletRequest.java:261)
at com.evermind.server.http.HttpApplication.checkAuthenticationAndAuthorize(HttpApplication.java:6332)
at com.evermind.server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:3009)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:736)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Supplemental Text
javax.security.auth.login.LoginException: java.lang.NullPointerException
at javax.naming.InitialContext.getURLScheme(InitialContext.java:228)
at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:277)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule.performDbAuthentication(DBTableOraDataSourceLoginModule.java:484)
at oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule.login(DBTableOraDataSourceLoginModule.java:335)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at oracle.security.jazn.oc4j.OC4JUtil.doJAASLogin(OC4JUtil.java:241)
at oracle.security.jazn.oc4j.GenericUser$1.run(JAZNUserManager.java:818)
at oracle.security.jazn.oc4j.OC4JUtil.doWithJAZNClsLdr(OC4JUtil.java:173)
at oracle.security.jazn.oc4j.GenericUser.authenticate(JAZNUserManager.java:814)
at oracle.security.jazn.oc4j.FilterUser.authenticate(JAZNUserManager.java:1143)
at com.evermind.server.http.EvermindHttpServletRequest.getUserPrincipalInternal(EvermindHttpServletRequest.java:3601)
at com.evermind.server.http.AJPHttpServletRequest.getUserPrincipalInternal(AJPHttpServletRequest.java:261)
at com.evermind.server.http.HttpApplication.checkAuthenticationAndAuthorize(HttpApplication.java:6332)
at com.evermind.server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:3009)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:736)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:872)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at oracle.security.jazn.oc4j.OC4JUtil.doJAASLogin(OC4JUtil.java:241)
at oracle.security.jazn.oc4j.GenericUser$1.run(JAZNUserManager.java:818)
at oracle.security.jazn.oc4j.OC4JUtil.doWithJAZNClsLdr(OC4JUtil.java:173)
at oracle.security.jazn.oc4j.GenericUser.authenticate(JAZNUserManager.java:814)
at oracle.security.jazn.oc4j.FilterUser.authenticate(JAZNUserManager.java:1143)
at com.evermind.server.http.EvermindHttpServletRequest.getUserPrincipalInternal(EvermindHttpServletRequest.java:3601)
at com.evermind.server.http.AJPHttpServletRequest.getUserPrincipalInternal(AJPHttpServletRequest.java:261)
at com.evermind.server.http.HttpApplication.checkAuthenticationAndAuthorize(HttpApplication.java:6332)
at com.evermind.server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:3009)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:736)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)

Well, still struggling with this one.. although i've managed to get fine oc4j security logging enabled through the console, the error stream now follows this sequence of events at each login attempt :
[DBTableOraDataSourceLoginModule]login called on DBTableLoginModule
[DBTableOraDataSourceLoginModule]Calling callbackhandler ...
[DBTableOraDataSourceLoginModule]Username returned by callback = TATKINS
[DBTableOraDataSourceLoginModule]Username changed to case as defined by null to TATKINS
[DBTableOraDataSourceLoginModule]Abort called on LoginModule
java.lang.NullPointerException
at javax.naming.InitialContext.getURLScheme(InitialContext.java:228)
at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:277)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule.performDbAuthentication(DBTableOraDataSourceLoginModule.java:484)
at oracle.security.jazn.login.module.db.DBTableOraDataSourceLoginModule.login(DBTableOraDataSourceLoginModule.java:335)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
etc etc...
JAAS-OC4J: Authentication failure for user: TATKINS
JAAS-OC4J: Membership check for group: USER failed for user: anonymous
What i cant work out is what is causing the login module to abort and raise a null pointer exception. Could this be due to a configuration mistake in the console manager or one of the xml files prior to deployment? I just have no idea how to approach fixing this issue.
I really would appreciate some assistance, 5+ days trying to get this working. I had this working on jdeveloper embedded oc4j, and all the tute's on standalone deployment pass off the configuration of standalone as simple compared to embedded, yet don't go into enough detail to get it working, atleast from my perspective.

Intreperter Failed ERROR while cancelling leave request in ESS

Hi all,
We are facing this issue. When a person goes to ESS and tries to delete a wrongly raised leave request by pressing on trash button. We get a confirmation screen. In that after pressing on " Delete leave request" we get the following error
INTERPRETER FAILED
THE INTERNET TRANSACTION SERVER FAILED TO GENERATE THE RESPONSE FOR CURRENT REQUEST.
PLEASE CONTACT THE SYSTEM ADMINISTRATOR.
INTERNAL ERROR CODE: 0X2101
NOTE : This issue is only with certain employees.
Can anybody guide what should be done so as to resolve the above said issue.
Thanks in advance.
Gowri Shankar.

Hi,
This means 'no such input', I assume the Business HTML interpreter is
searching for a template that does not exist...
If you are using the internal ITS you will find information in the related trace
file, for the stand alone ITS in the agateX_sapjulep.trc.
Alternatively you want to set ~generatedynpro temporarily in order to see
which screen should be processed.
regards
Tobias

ESS-ITS error

Hi all,
   We have installed ITS 6.2 for ESS 4.7 and also EP 6.0 .
Currently we plan to use the same ITS without EP settings(not using business packages).
We havent changed the EP settings n intend to run the ITS services defined for ESS 4.7 through the browser instead through EP.
      When we run the service "PZ00" through the browser,we get the following error:
Interpreter Failed
The Internet Transaction Server failed to generate the response for current request.
Please contact the system administrator.
Internal error code: 0x2101
Also we are not able to run WEbgui service.Error encountered is "Page cannot be displayed".
    Can anyone assist in this?Also will the reinstallation of ITS affect the EP settings(We have installed ITS on the EP server)?
Thanks & Regards,
Deepti.

Hi Deepti,
ESS on ITS only should be run through the menu PZM3 which requires configuration before it will run. See R/3 Notes 321439 and 212990.
Installing the ITS on the EP server shouldn't affect it as long as they are using different ports for the HTTP services.
Hope this helps.
Regards,
Al Morrison

Odd jpeg version errors 6.2 and 7 in glib/gtk

Hi,
I keep getting this error with a gtk benchmarking program:
error message: Failed to load image 'image.jpg': Error interpreting JPEG image file (Wrong JPEG library version: library is 62, caller expects 70)
I recompiled:
- Glib
- GTK
- LibJPEG
- Codeblocks (also because of another issue)
And i keep getting this issue.
When i run: ldd /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-jpeg.so that returns:
[mark@Mark-Arch ~]$ ldd /usr/lib/gtk-2.0/2.10.0/loaders/libpixbufloader-jpeg.so
linux-vdso.so.1 => (0x00007fff88eb1000)
libjpeg.so.7 => /usr/lib/libjpeg.so.7 (0x00007fc561ed7000)
libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x00007fc561cb9000)
libgio-2.0.so.0 => /usr/lib/libgio-2.0.so.0 (0x00007fc561a0b000)
libresolv.so.2 => /lib/libresolv.so.2 (0x00007fc5617f5000)
libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x00007fc5615b0000)
libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x00007fc5613ac000)
libdl.so.2 => /lib/libdl.so.2 (0x00007fc5611a8000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00007fc560ec5000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0x00007fc560c9c000)
libm.so.6 => /lib/libm.so.6 (0x00007fc560a1a000)
libc.so.6 => /lib/libc.so.6 (0x00007fc5606c7000)
/lib/ld-linux-x86-64.so.2 (0x00007fc56233b000)
libz.so.1 => /usr/lib/libz.so.1 (0x00007fc5604b1000)
[mark@Mark-Arch ~]$
So, jpeg seems to be linked against version 7 but the actual jpeg version seems to be 6.2! Could someone explain me what's going wrong here and more importantly how to fix this?
as for libjpeg. i saw nothing strange in the PKGBUILD for that file so how come that this still acts so strange in glib?
Thanx,
Mark
Last edited by markg85 (2009-08-29 00:42:06)

Allan wrote:
You can just use ABS to download it at the moment.
Edit:
# Maintainer Stefan Husmann <[email protected]>
# Contributor: Mihai Militaru <[email protected]>
# Contributor: scippio <[email protected]>
pkgname=freeimage
pkgver=3.12.0
pkgrel=2
pkgdesc="Library project for developers who would like to support popular graphics image formats."
arch=('i686' 'x86_64')
license=('GPL' 'custom:FIPL')
url="http://freeimage.sourceforge.net/"
depends=('gcc-libs')
makedepends=('hd2u')
source=(http://dfn.dl.sourceforge.net/sourceforge/freeimage/FreeImage3120.zip)
md5sums=('47b259102f776a4bcd7affc00942f3b4')
build() {
cd ${srcdir}/FreeImage
make || return 1
make DESTDIR=${pkgdir} install || return 1
make -f Makefile.fip || return 1
make -f Makefile.fip DESTDIR=${pkgdir} install || return 1
install -Dm644 $srcdir/FreeImage/license-fi.txt \
$pkgdir/usr/share/licenses/$pkgname/license-fi.txt
Recompiled it and rebuilded my benchmark script. Still the same issue.
However there is another more strange issue.. FreeImage alone worked fine and is working fine.. just the combination i use is giving problems or so it seems.

Data Cache Settings

Hello,
I am coming up with the spreadhseet retreival error very frequently and get Essbase Error 1130203. I went through the Error interpretation and found that Data Cache might be causing it. Here are the details of cache settings on my
databases currently. Can somebody please help me understand if they are right or need some changes:
DataBase A:
Data File Cache setting (KB) 32768
Data cache setting (KB) 100000
Block Size: (B) 143880
Number of existing blocks: 7266
Page file size: 40034304
DataBase B:
Data File Cache setting (KB) 32768
Data cache setting (KB) 300000
Block Size: (B) 91560
Number of existing blocks: 1912190
Page file size:2147475456--1
Page file size: 500703056
DataBase C:
Data File Cache setting (KB) 300000
Data cache setting (KB) 37500
Block Size: (B) 23160
Number of existing blocks: 26999863
Page File Size: 21 page file =21 * 2= 42 GB
If this might not be the issue then please let me know what might be causing it?
Thanks!
Edited by: user4958421 on Dec 15, 2009 10:43 AM

Hi,
1. For error no 1130203, here are the possible problems and solutions, straight from document.
Try any of the following suggestions to fix the problem. Once you fix the problem, check to see if the database is corrupt.
1. Check the physical memory on the server computer. In a Windows environment, 64 MB is the suggested minimum for one database. In a UNIX environment, 128 MB is the suggested minimum for one database. If the error keeps occuring, add more memory to the server computer.
2. If you are on a UNIX computer, check the user limit profile.
3. Check the block size of the database. If necessary, reduce the block size.
4. Check the data cache and data file cache setting. If necessary, decrease the data cache and data file cache sizes.
5. Make sure that the Analytic Services computer has enough resources. Consult the Analytic Services Installation Guide for a list of system requirements. If a resource-intensive application, such as a relational database, is running on the same computer, the resource-intensive application may be using the resources that Analytic Services needs
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Cache Settings

Hello,
I am coming up with the spreadhseet retreival error very frequently and get Essbase Error 1130203. I went through the Error interpretation and found that Data Cache might be causing it. Here are the details of cache settings on my
databases currently. Can somebody please help me understand if they are right or need some changes:
DataBase A:
Data File Cache setting (KB) 32768
Data cache setting (KB) 100000
Block Size: (B) 143880
Number of existing blocks: 7266
Page file size: 40034304
DataBase B:
Data File Cache setting (KB) 32768
Data cache setting (KB) 300000
Block Size: (B) 91560
Number of existing blocks: 1912190
Page file size:2147475456--1
Page file size: 500703056
DataBase C:
Data File Cache setting (KB) 300000
Data cache setting (KB) 37500
Block Size: (B) 23160
Number of existing blocks: 26999863
Page File Size: 21 page file =21 * 2= 42 GB
If this might not be the issue then please let me know what might be causing it?
Thanks!

You have posted the same question on the essbase forum > Data Cache Settings
You are more likely to get more responses on the essbase forum to this question.
From the docs
Error - 1130203
Essbase is unable to allocate memory.
Possible solutions
Try any of these suggestions to fix the problem. After you fix the problem, determine whether the database is corrupt (see Checking for Database Corruption).
Check the physical memory on the server computer. In a Windows environment, 64 MB is the suggested minimum for one database. In a UNIX environment, 128 MB is the suggested minimum for one database. If the error keeps occurring, add more memory to the server computer.
If you are on a UNIX computer, check the user limit profile (see Checking the User Limit Profile).
Check the block size of the database. If necessary, reduce the block size.
Check the data cache and data file cache setting. If necessary, decrease the data cache and data file cache sizes.
Ensure that the Essbase computer has enough resources. Consult the Oracle Hyperion Enterprise Performance Management System Installation Start Here for system requirements. If a resource-intensive application, such as a relational database, is running on the same computer, the resource-intensive application may be using the resources that Essbase needs.
Cheers
John
http://john-goodwin.blogspot.com/

SMS Vcard for Blackberry 9720 running ver 7.1

Hello
I was using the SMS Vcard with my earlier \bb which had ver 4.5 .
Now with (&20 , when I am installing the app , it install m but during import of the contact , it gives error Error Interpreting serial format VCARD UTF-8 "
Can somebody suggest what could be the reason for this
Pratip

That's supposed to show you the problem isn't Firefox, don't know how successful that actually is. You can delete it so that it starts up again. Susggest restarting Firefox when you see it has used about an hour of CPU time as the next hour of CPU time will take shorter to get there and you will be locked out.
Also see this -- the solution on all the items seem to fix a lot of problems with the places.sqlite database.
:'''freezing at regular intervals''': http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals

Our office uses Thunderbird and has been receiving unusual messages and been unable to work effectively since Friday April 9, 2014. Whenever trying to send a

Our office uses Thunderbird and has been receiving unusual messages and been unable to work effectively since Friday April 9, 2014.
Whenever trying to send a message we receive a window message that says:
Add Security Exception
You are about to override how Thunderbird identifies this site.
Legitimate banks, stores, and other public sites will not ask you to do this.
Server
Location: mail.greatersyracuseworks.org Get Certificate
Certificate Status
This site attempts to identify itself with invalid information. View
Wrong Site
Certificate belongs to a different site, which could indicate an identity theft.
When we open the Certificate status window, it indicates that the Validity was issued 4/9/14 (when our problems started)
As of today we can receive messages but not send anything…very annoying.
Is this related to the recent Heartbleed bug or is something else going on?
What are our options to restore service?
Thanks for any help!

Is Thunderbird mistaken about the certificate listing a host name other than your mail server, or is the error interpreting the certificate correctly?
You can check in two places:
* on the first tab of the certificate viewer, "Common Name"
* on the second tab of the certificate viewer, lower box, Extensions category, look for "Certificate Subject Alt Name" to see whether the certificate covers multiple different host names

Obsolete BBPPO01

Hi,
We are currently upgrading our system to SRM 5.0 and have encountered the following: when logged in as a purchaser the following link SRM Operational Purchaser >> Operational Purchaser >> Purchase Orders >> Process Purchase Orders points to an obsolete transaction code namely BBPPO01 which has been replaced with BBP_POC. How can we go about changing the link to point to the correct transaction code.
Any help would be appreciated.
Kind Regards,
Doreen

Hi,
Have you checked ST22?What analysis is it showing?Also check whether the note 859213 helps.
Also republish the service for 'Process Purchase Order and check.
Please refer to following SAP OSS notes, which will help.
Note 833205 - bbppo01 - error message: BBP_PD 358 when adding a new item
Note 901364 ITS620 WGate Huge HTTP Requestheader blocks other headers
Note 741067 BBPVENDOR: ITS error "Interpreter Failed" in logoff
725124 EBP opened in a new screen (without browser buttons)
893148 Interpreter Failed / Missing Template / BBP_PM01
879923 "Interpreter Failed" when approving the second item in SC
745837 "Interpreter Failed" when expanding a shopping cart
711941 Procurement card: ITS error in account assignment details
718489 Bidding Engine: Termination when creating PO and contract
660268 SRM 3.0: Releasing and checking purchase contracts
546748 FAQ: ITS related questions in EBP
422858 Interpreter Failed Template ...\SAPMSYST_29_DE.html
428879 BBPPS01: Project search leads to short dump
498464 RZ20: EBP template executed.html is not found
490301 URL in Role(Web address,Generic Web address[url templates])
Note 355380 Internal error code: 0x2101 during service UPI01
Refer to this link ->
"Buffer table not up to date"
Please see the following SAP OSS Notes as well.
Note 1001561 Error during upgrade phase XPRAS_UPG
Note 895932 - Dump after applying note 895171
1023130 - Finally Invoice indicator can not be cleared
906151 - Follow on correction for note 895171
895171 - Unsynchronized follow-on document indicator in extended PO
770527 EBP 3.0+: Rejection of incorrect SC items
751022 Monitor Shopping Cart: Item deletion causes termination
658916 Termination when (un)deleting an item in change version
630581 Update termination in BBP_PDLIM_SUM_UPDATE
617187 Update termination due to deletion of several items
562787 Termination GENERATE_SUBPOOL_DIR_FULL in the sourcing
559931 Abort w/ confirmation w/ unplanned item
526831 EBP: Missing currency in the limit results in termination
451482 Contracts are not found at the creation date
439034 Problems with invoices for blanket purchase orders
424590 Purchase order item cannot be deleted
415942 EBP 30A: multiple company scenario
BR,
Disha.
Pls reward points for useful answers.

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

"Cannot interpret data in file" error while using GUI_UPLOAD for .xls file

Hi,
     I have made a program using FM GUI_UPLOAD to upload an .xls file to an internal table. But upon executing ,it gives error "Cannot Interpret data in file". I have seen in other posts people talking about GUI_UPLOAD FM to upload data from excel directly into internal table. Kindly help.
Here is my code. I had tried using different combination for HAS_FIELD_SEPARATOR but still its not working.
In my emp1.xls file , the data in each column is present in the same order as in the internal table. Although the first column in my internal table is NUMC. I dont know if that is causing the problem.
REPORT ZUPLOAD_1.
data: itab TYPE TABLE OF zempl_master WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\empl1.xls'
    FILETYPE                      = 'ASC'
    HAS_FIELD_SEPARATOR           = 'X'
*   HEADER_LENGTH                 = 0
*   READ_BY_LINE                  = 'X'
*   DAT_MODE                      = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   CHECK_BOM                     = ' '
*   VIRUS_SCAN_PROFILE            =
*   NO_AUTH_CHECK                 = ' '
* IMPORTING
*   FILELENGTH                    =
*   HEADER                        =
TABLES
    DATA_TAB                      = itab.
* EXCEPTIONS
*   FILE_OPEN_ERROR               = 1
*   FILE_READ_ERROR               = 2
*   NO_BATCH                      = 3
*   GUI_REFUSE_FILETRANSFER       = 4
*   INVALID_TYPE                  = 5
*   NO_AUTHORITY                  = 6
*   UNKNOWN_ERROR                 = 7
*   BAD_DATA_FORMAT               = 8
*   HEADER_NOT_ALLOWED            = 9
*   SEPARATOR_NOT_ALLOWED         = 10
*   HEADER_TOO_LONG               = 11
*   UNKNOWN_DP_ERROR              = 12
*   ACCESS_DENIED                 = 13
*   DP_OUT_OF_MEMORY              = 14
*   DISK_FULL                     = 15
*   DP_TIMEOUT                    = 16
*   OTHERS                        = 17
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP at itab.
write:/ itab-emp_no,itab-name.
endloop.

hi amber22 you need to use the below fm to upload an xls file
FORM EXCEL_UPLOAD .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      FILENAME    = FILENAM
      I_BEGIN_COL = 1
      I_BEGIN_ROW = 1
      I_END_COL   = 6
      I_END_ROW   = 100
    TABLES
      INTERN      = xl_itab.
* EXCEPTIONS
* INCONSISTENT_PARAMETERS = 1
* UPLOAD_OLE = 2
* OTHERS = 3 .
IF SY-SUBRC = 0.
MESSAGE 'DATA UPLOADED SUCCESSFULLY' TYPE 'I'.
ENDIF.
ENDFORM.                    " EXCEL_UPLOAD

Error interpretation

Similar Messages

Maybe you are looking for