"Error intitializing communications with the LMS" in Captivate 8.0.1

After updating to 8.0.1.242 and publishing projects as SCORM 1.2 in html5, I get the error message "Error intitializing communications with the LMS" both in the LMS we use and in ScormCloud. This happens in IE 10.0.9200. I am pretty sure we have not had this message before. I had a colleague generate the same project for me using 8.00.145 and I get no error message. Any input on what causes this would be appreciated.

Can you share your project on id: [email protected]
we will try to investigate this at our end. Also please send the exact steps how you are able to get this error.
Regards
Shriyansh
Adobe Engineering Team

Similar Messages

Error while communicating with the server

Hi Experts,
I'm having the following issue, when I try to send data using an input schedule the server says that there was an error while communicating with the server and don't send the data, I took a look at the log file and it says the following,
==============[BPC Logging]==============
[Message Type] : ERROR
[Job Name]     : OSoft.Services.Application.FileAccessService.FileAccessServiceProxy
[DateTime]     : 4/6/2011 8:42:44 AM
[UserId]       : CAMESAP\BPC_SYSADMIN
[Message]       : UJF_EXCEPTION E018     Cannot find document/directory 0
==============[BPC Logging End ]==============
Also i went to take a look at the default script logic, because i remember that this error happened to me when i wrongly program an script logic in the default.lgf but it shows me the following error when I open it,
System.InvalidCastExeption: Specified cast is not valid
at System.data.DataColumnCollection.get_Item(String name)
at System.data.DataRow.get_Item(String columnName)
at Osoft.Consumers.Admin.AdminLogicClient50.LogicMain.GetLogic()
If I compile the file, the error stop appearing, put with all new logic files it happens at first, I think that these two errors are very deep related, if anyone can help me will be very appreciated,
Thanks in advanced

Hi,
I have faced the similar kind of problem in BPC NW 7.5 SP5.
The main reason is when you are trying to send any data via input schedule, you will get this web server communication issue.
1) Check if any thing you are calling script logic under default.LGF. Exclude the logic out from default and test it.
2) Process all the dimensions in application
3) Perform Lite optimization and check are there any errors.
4) Finally check BPC COM+ services and check if any service stopped and also check osoft send governer service in microsoft services.
5) Diagnoise usign server manager.
6) Try input some thing in apshell and check if u face the same web server communication error?

"ListenerRfc : unknown error" in communication with the IGS from the WAD

Hi all,
I face a problem with the charts in the web template I built. The source query shown as a table is normally presented but the views from the same query are not displayed at all. The diagnostic message refers to an internal error met during the communication with the IGS. The system activities messages text is "ListenerRfc : unknown error".
Anybody could give me a hand in that case?
Thanks in advance.
Geo

Hi,
The connection is Ok. I asked the admnistrator to restart the server because the IGS was desactivated yesterday in a reboot. The IGS works now... when it wants.
I face a new message : "ListenerRfc: unknown interpreter". It seems the problem is not over.
When I launch the dashboard in the web from the WAD, sometimes it shows the chart of the 1st item with the old message for the 2nd or the new message for the 1st one and a chart for the 2nd item.
Deep thanks for your help. I need nevertheless to solve the problem.
Geo

"Error occurred communicating with the server. Please contact the administrator." When I try to access to access templates

Hi All,
Integrated app director 5.2 with vcac6. I've added vcac as cloud provider but can't access to blueprints. When I click templates button, getting above error. Please help?
Thanks in advance
John

A previous answer to this question tells us that in Firefox 3.6.12 the default connection settings have been changed to "Use the system proxy settings".
You can find the connection setting here: Tools > Options > Advanced : Network : Connection: Settings (See attached image.) If you do not need to use a proxy to connect to internet then select No Proxy.
IMPORTANT NOTE: If you did not change these setting yourself, this may be a symptom that your proxy server settings have been hijacked by a virus called "Antivirus Action" that Firefox may acquire. Even after you [http://www.bleepingcomputer.com/virus-removal/remove-antivirus-action remove the virus] following directions, you will need to manually reset your Firefox proxy settings.

Scanning Device not Communicating with the Computer

Can anyone help? I go to launch my Hp Director software to scan a document and an error message appears that says "An error occurred communicating with the scanning device. Please ensure that the scanning device is connected properly and try again." This has happened before but I can't remember the steps performed on the Menu of the scanner. Does anyone know how to get the computer and Laserjet 2840 to communicate?
Thanks

AlmostThere wrote:
If the error message appears on the computer while scanning from a networked product, click this link: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=au&product=3204785&docname=c00897542. If with USB, click this link: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00040499&cc=au&lc=en&dlc=en&product=3204785
Regards,
AlmostThere
your link @ http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=au&product=3204785&docname=c00897542 doesn't work

Error in Communicating with DCR Server LMS 4.0

I´m receiving this error when I try do add a device in isolated form or by discovery:
Error in communicating with DCR Server.
DCR Server may be down. Please start the DCR Server and then refresh the page.
I am using windows 2008 standard server RC1 SP1, and CiscoWorks LMS 4.0.
I had applied all of patches includes.
The DCRserver is running. ( I did restart it)

You're using Windows 2008 RC1 (a release candidate version)? LMS is only supported on the final shipping version of Windows 2008, and not yet on R2.
If you're running on the final version of 2008 server, post the output of the pdshow command as well as the dcr.log, DCRServer.log, NMSROOT/MDC/tomcat/logs/stdout.log and stderr.log.

Error in communicating with DCR Server. in LMS 3.1

I am receiving this error when I try to ad device: Error in communicating with DCR Server.
DCR Server may be down. Please start the DCR Server and then refresh the page.
The DCRserver is running. ( I did restart it)
I am using Windows version of LMS 3.1
CiscoWorks Common Services 3.2.0 Licensed Not applicable
Campus Manager 5.1.4 Purchased 300
CiscoView 6.1.8 Licensed Not applicable
CiscoWorks Assistant 1.1.0 Licensed Not applicable
Device Fault Manager 3.1.3 Purchased 300
Internetwork Performance Monitor 4.1.0 Purchased 300
Integration Utility 1.8.0 Licensed Not applicable
LMS Portal 1.1.0 Licensed Not applicable
Resource Manager Essentials 4.2.0 Purchased 300
Health and Utilization Monitor 1.1.0 Evaluation(Expired) 100

Hi,
This issue most likely is related to a communication problem with the database or a corruption as we can see from the logs :
2010/11/21 19:44:41 main ani ERROR POStore: Failed resolving object because: java.lang.NullPointerException
2010/11/21 19:44:41 main ani ERROR AniMain: java.lang.NullPointerException
ANI Server failed to load from the database.
Please stop and restart the system. You may need to re-initialize the database.
If this does not work, please contact technical support.
The next step is to re-initialize the Campus Manager database. This procedure will delete all the records and maps that you have in Campus Manager, you would need to run a new Campus Data Collection and User Tracking Acquisition to have clean and fresh database information.
If that ok with you, you can try the below steps to re-initialize the Campus database. By doing this, it will not effect any other database of LMS will clean Campus Manager database.
+) Stop the daemon manager:
net stop crmdmgtd
+) cd CSCOpx\bin\
+) Type the following command (case sensitive):
perl dbRestoreOrig.pl dsn=ani dmprefix=ANI
+) Start the daemon manager:
net start crmdmgtd
Now, wait another 15 minutes and wait for dmgtd.lock file to release from location CSCOpx\objects\dmgtd\ready.
Now check the status of ANIServer with command :- pdshow ANIServer ( case sensitive)
it should have the status Busy with Flag set.
Thanks,
Gaganjeet

Captivate 8 Tin Can - problem communicating with the learning record store

When publishing a course to Tin Can format, what should I enter in the 'Identifier' field?
If I publish with the default 'Course_ID1' text, I get an error when launching the course on our LMS. Errors says "There was a problem communicating with the learning record store."

Hello,
Welcome to Adobe Forums.
Please share your contact information via [email protected]
Thanks,
Vikram Gaur
Adobe Support

"An error occurred in the communication with the BW server"

Hi, when I open BEx Analyzer and try to connect to my BW server to run a query, I get this message, "An error occurred in the communication with the BW server".
Can someone help me.
thanks
Pat.

If it's happening consistently, it could be a problem with your local m/cs MS office and/or SAP GUI.
If it was working before:
1) Uninstall SAP GUI and MS office.
2) Install MS Office and SAP GUI...then try to connect to BW.
Good luck, BB

HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

Safari cannot open the page ~ The error was: "There was a problem communicating with the web proxy server (HTTP)

Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.

I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80.

Getting a "Your network preferences prevent us from communicating with the server" error in dw 5.5

Hello, lately i noticed dw 5.5 can't seem to use browserlab, it says "Your network preferences prevent us from communicating with the server"
I can connect to BC and other ftp servers no problem, I've also turned off my firewall to be sure and it still won;t connect.
The only info I found on this error is a tip on how to turn off browserlab, which in turn gets this error, Not sure why you would wnat to shut the feature off, but no tip to turn it on. The tip on editing the registry doesn;t help because itsyays to change the registry key to 0 and all communication of adobe products will be turned off, however the key does exist and is set to 1, so I can;t even try that tip in reverse to enable, itshould be communication already.
Any help would be appreciated, I am just competinga site and was about to check it in all the browsers, an incredibly useful and time saving feature, but I can't now.
Rich

Phil, the only screenshot I've seen from you is the error message (and I can't seem to view the others you just posted), so apologies if I told you something you'd already tried. We still think there should be a solution to this, it's just that debugging issues this way can be a little difficult, so please bear with us.
At this point our best guess is that there is a registry setting that got changed that is causing the issue for both of you. We have been able to repro the issue on Windows XP by setting the following 32-bit registry entry to 0. The issue was fixed by changing it back to 1. We've also tested on Windows 7 and verified the same thing with the 64-bit registry entry. Apologies if I'm suggesting something that any of you has already tried, but no details were provided about which registry entry you checked or what article you were looking at.
From the CSLive team:
"To my knowledge the only way to get that error message is to disable CSLive in the registry. The Customer does not mention the exact article or reg value that he is looking at in his post but it should be:
For 32-bit systems: HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\AdobeOnlineDefault.
For 64-bit systems: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\AdobeOnlineDefault
http://kb2.adobe.com/cps/846/cpsid_84665.html
He should delete the AdobeOnlineDefault entry in the registry and try again. (he may need to stop and restart CS55Services Manager or reboot machine)."
Let us know if this fixes the issue for you or not. As with any change to the registry we recommend you make a backup first and proceed carefully.
Thanks,
Mark

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

Not all of my photos upload to my website when I publish it. when my site finishes publising I get an error that says, "There was an error communicating with the FTP server. Try again later, or check with your service provider."

I am publishing directly to an FTP server (option 1). Is this the optimal method or should I be publishing to a folder and then (how do/would I?) publish to my hosting domain?
I'm wondering if this has really anything to do with the publishing process, or whether it just has to do with the photos and/or the photo albums. I've deleted the photo albums with the missing pictures from my site on iweb thinking a file might be corrupt. (I'm getting the albums from iphoto -- drag/drop method into iweb) I then replaced these albums with the same albums as the previous ones from iphoto and then published my site again -- and the EXACT same photos were once again missing in the NEW albums as were missing in the old albums...
Maybe it is a publishing issue, or it could be a photo/file issue. However, these albums aren't very large -- the largest containing 135 photos --
Please! if you have any suggestions or ideas as to what is happening I would be greatly appreciative!
I'm pulling my hair out here trying to diagnose the problem...

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

Publish error There was an error communicating with the FTP server. Try again later, or check with your service provider.

OK! So I got everything filled out right to publish my iWeb site with iCloud now but after it looks like everything is fine this error pops up REPEATLY!:
PUBLISH ERROR There was an error communicating with the FTP server. Try again later, or check with your service provider.
Is this an Apple problem or with my server Netfirms???

Yeah no sorry not the answer. I have my own online hosting unlimited space and bandwidth.
It seems to be linked to teh podcast image. It's very strange...

"Error intitializing communications with the LMS" in Captivate 8.0.1

Similar Messages

Maybe you are looking for