Error: Invalid interruption of a database selection

Hi,
When i execute the below code, the output is displayed without any problem.
<b>tables lfa1.
select * from lfa1 order by lifnr.
write / lfa1-lifnr.
endselect.</b>
But however when i debug this piece of code, i get an error as below.
ShrtText - Invalid interruption of a database selection
Runtime Errors - DBIF_RSQL_INVALID_CURSOR
Exceptn - CX_SY_OPEN_SQL_DB
Can anybody help me with the reason for the occurence of this problem.

Hi Vijay,
Just go through the following link:
Re: DBIF_RSQL_INVALID_CURSOR dump during debugging
As Sooness pointed out, SELECT-ENDSELECT dumps only the first time. Try re-executing it and it will work fine.
Meanwhile, it is always better to use INTO TABLE OF instead of SELECT-ENDSELECT, as this minimizes database hits.
Regards
Anil Madhavan

Similar Messages

Runtime Error:Invalid interruption of a database selection

Hi,
I have the above mentioned runtime error (short text of runtime error) while executuing FM with the runtime error DBIF_RSQL_INVALID_CURSOR and exception CX_SY_OPEN_SQL_DB.
the source code for the cause of the error is as follows:
{       PERFORM fill_spras USING g_r_werks[]
                      CHANGING g_r_spras[].
      IF g_r_spras[] IS INITIAL.
Please specify a value for Language.
        MESSAGE e003(yy_master_data).
        RAISE error_passed_to_mess_handler.
      ENDIF.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      OPEN CURSOR s_marc FOR SELECT *
      FROM marc
      WHERE werks IN g_r_werks AND
            matnr IN g_r_matnr.
    ENDIF.                             "First data package
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR s_marc INTO TABLE gt_marc PACKAGE SIZE s_s_if-maxsize.
    IF sy-subrc = 0.
      DELETE ADJACENT DUPLICATES FROM gt_marc COMPARING matnr}
the pointer shown in the runtime analysis is at if sy-subrc EQ 0.
while debugging also it gives run time error when curson reaches the statement FETCH Next Cursor.
Any ideas?

Hi Simran,
if for whatever reason the process is interrupted between SELECT and ENDSELECT (or, in other words, after OPEN CURSOR between subsequent FETCHes), you will get this error: The Database is exspected to run within one logical unit of work.
If any screen is displayed waiting for user input (this also applies for debug screen), an implicit commit is is done that finishes the current LUW. The database will not like it....
That's why you should do only minor things between SELECT and ENDSELECT (OPEN/CLOSE CURSOR).
The E Message will also cause the end of the LUW.
Regards,
Clemens

DBIF_RSQL_INVALID_CURSOR: Invalid interruption of a database selection.

I have created an external program that extracts a very large table from SAP 7.0 through RFC using the NetWeaver SDK APIs. This program repeatedly calls an RFC-enabled function written in ABAP. On the first
call the function does "OPEN CURSOR WITH HOLD" and a "FETCH". On each subsequent call the function does a "FETCH". The cursor is declared as "STATICS".
When I run the program I am getting the following error:
DBIF_RSQL_INVALID_CURSOR: Invalid interruption of a database selection.
This error manifests itself in two ways.
1) When time interval between RfcInvoke() calls is about 0.5 sec., it takes 30 sec. to 90 sec. for the error to come out.
2) When time interval between RfcInvoke() calls is about 0.2 sec. or lower, it takes 8 min. to 17 min. for the error to come out, but sometimes the program completes successfully in 25 min.
1) What is causing this error?
2) If it has something to do with SAP configuration, how it be modified to extract this particular table.
3) Is it possible in general to extract a table of any size (on the magnitude of gigabytes) using such an approach, that is, a "pull".
4) If the answer is negative, what approach do you think is appropriate.
Any help will be appreciated.

Hi Andrew Coleman ,
This error sounds like problem is in the way you are calling the RFC Function module (n -number of times). Looks like during the subsequent calls the Select / ENDSELECT is failing need to check that logic.
Thanks,
Greetson

Load data error: Database selection with invalid cursor (sm21)

hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu.

Processchar occur error: Database selection with invalid cursor (sm21)

hi,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue , The Oracle checkpoint is not complete.
thanks,
xwu.

Database selection with Invalid Cursor error in RSDRI_INFOPROV_READ

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

Database selection was interrupted (see long text) Error

Hi
Please let me know the process to resolve this error on DTP in BI, when i repeat this DTP it is failing again. and the most of the transferred records are added to the target DSO.
Error: Database selection was interrupted (see long text)

Hi:
Please check if any of the SAP Notes below helps you in solving this issue.
Note 1285640 - 70SP21: "Database selection was interrupted"
Note 1518750 - Additional trace messages in the DTP request log
Note 1519889 - DTP processing: "Database selection was interrupted"
Regards,
Francisco Milán.

Frequest process chain issue - Database selection was interrupted

hi experts,
we are running master data meta chains daily, and we have PP,SD,MM,LO,FI,PS masterdata meta chains running daily, and everyday 2-3 process chains are failing, it is extracting only 50000 records and the requests becomes RED.
if i check the long text of the error message, it is giving the below error message.
Database selection was interrupted (see long text)
Message no. RSBK072
Diagnosis
You are extracting data from a DataSource or an InfoProvider. The selection is made with an open database cursor. This cursor has been invalidated by one of the following ABAP statements:
COMMIT WORK
ROLLBACK WORK
CALL TRANSACTION
SUBMIT
The ABAP statement responsible for termination probably ran in a transformation routine programmed by you.
System Response
Request processing has ended with errors.
Procedure
Change the code for the transformation in which one of the specified ABAP statements is executed. If you are using statement COMMIT WORK, replace it with:
CALL FUNCTION 'DB_COMMIT'.
again if i delete the request from the target and repeat it is working fine but taking lot of time. but there are no routines in the transformations.
please provide us the solution to rectify the issues as it is causing lot of reporting issues.
regards
venuscm

hi experts,
here is the source 0MAT_PLANT_TEXT and the target is 0MAT_PLANT.
info package load is very fast, but DTP it is taking lot of time if i execute the DTP Manually.
The data packets are processed very fast, but after that at the bottom
Set technical status to green and
set overall status to green in yellow very long time, due to this DTP Load for above master data is taking long time.
how to resolve this?
any solutionz pl.
Regards
venuscm
Edited by: venu WAD on Oct 24, 2011 6:37 AM

Database selection with invalid cursor !

hi experts,
When execute SAP BW processchar, it occur some system error: (sm21)
Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed).
this error occur when apply bw support package 19.
sap notes 1118584 Solution is: Import Support Package 17 . but my support package is 19.
how can i solve this error?
thanks,
xwu.

I am only assuming things, but it might be worth to look closely if you were experiencing an ORA- error during the execution. This could have caused a rollback and thus closed the cursor. Please check the job log, the workprocess trace (dev_wX file) and the system log SM21 and ST22 as well.
Besides that check the oracle alertlog and the usertrace destination.
Best regards, Michael

Database selection with invalid cursor with MaxDB database

Hi Experts,
I encountered the this error:
"Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed)."
We are using bw support package 19 early this month. Previously is working fine but this problem occured from the last 2 days.
We are using MaxDB database.
Really appreciate any speedy responds.

Hi,
We finally resolved the issue.
The solution:
We check the RFC connection test in SM59. There are connection error.
There is an error that related J2EE_ADMIN user.
SO we reset the J2EE_ADMIN id in SU01.
The problem goes away.
Many thanks

No Database Selected - error when running queries

Hi all,
I have just got a shiny new macbook at work. For some reason whenever I try to run a query I receive the error "No Database Selected".
I am connected, I have even tried including a "USE MyFancySchema;", but to no avail.
I am using Version 3.0.03 Build MAIN-03.45 with MySQL JDBC connector version5.1.14 to connect to MySQL 5.1. The same setup ran fine on my previous Linux laptop.
Any ideas?

Oh I hadn't set a default database in the connection settings.
Edited by: user12063202 on Jan 24, 2011 7:30 AM

Error "no database selected" when importing tables from MySQL

I'm trying to import tables from MySQL to OBI repository. However, after selecting the MySQL ODBC and prompting user name and password there's an error:
[nQSError: 16001] ODBC error state: HY000 code: 1046 message: [MySQL][ODBC 5.1 Driver][mysqld-5.0.56sp1-enterprise-glp-nt]No database selected.
Seems like the database is somehow not selected althought I defined it (sakila sample database) in the ODBC connection properties and the ODBC test is successful. Anybody has experiences with MySQL + OBI?
Thanks

the issue was solved by using MySQL odbc 3.51... with that there're no problems whatsoever

XSL-1047: (Error) Invalid instantiation of 'xsl:output' in 'INSERT' context

Following is my development environment:
JDeveloper 9i Release Candidate
JDeveloper JVM 1.3.1
Oracle XML Parser v2 9.2.0.0.0
I'm using the Oracle XML Parser V2 9.2.0.0.0 library to apply a stylesheet to an XML document. However when I invoke the call to processor.processXSL() an XSLException is thrown with the following details:
oracle.xml.parser.v2.XSLException: <Line 1, Column 116>: XSL-1047: (Error) Invalid instantiation of 'xsl:output' in 'INSERT' context.
exception
Below is the sequence of events:
// Create an instance of XSLProcessor to perform the transformation
XSLProcessor processor = new XSLProcessor();
// create a Reader from a String object that contains the stylesheet text
StringReader r = new StringReader( stylesheet );
// create a new XSL stylesheet, passing it the Reader object reference
XSLStylesheet sheet = processor.newXSLStylesheet(r);
// apply the stylesheet
// the variable sheet represents the XSLStylesheet object
// the variable source represents the XMLDocument object
// this call throws the exception
DocumentFragment df =
processor.processXSL(sheet,source);
I've included the Stylesheet and source XML file I'm processing below.
Note: My application works fine when I use the Oracle XML Parser v2 9.0.1 library. (although I have to use new XSLStylesheet() in place of XSLProcessor.newXSLStylesheet())
Any ideas on what has changed between the two releases? I do have a reproducible test case that I can send on if required?
thanks in advance
private String stylesheet =
"<INSERT xsl:version=\"1.0\" xmlns:xsl=\"http://www.w3.org/1999/XSL/Transform\"> "+
"<xsl:output method=\"xml\" indent=\"yes\"/> "+
"<ROWSET table_name=\"acc_database\"> "+
" <xsl:for-each select=\"DATABASES/DATABASE\"> "+
" <ROW> "+
" <DBID><xsl:value-of select=\"DBID\"/></DBID> "+
" <DBNAME><xsl:value-of select=\"DBNAME\"/></DBNAME> "+
" <DBSIZE><xsl:value-of select=\"DBSIZE\"/></DBSIZE> "+
" <DBPATHNAME><xsl:value-of select=\"DBPATHNAME\"/></DBPATHNAME> "+
" <DBUSER><xsl:value-of select=\"DBUSER\"/></DBUSER> "+
" <DBPASSWORD><xsl:value-of select=\"DBPASSWORD\"/></DBPASSWORD> "+
" <ISAPPDB><xsl:value-of select=\"ISAPPDB\"/></ISAPPDB> "+
" <ISATTACHEDDB><xsl:value-of select=\"ISATTACHEDDB\"/></ISATTACHEDDB> "+
" <CONVERTDB><xsl:value-of select=\"CONVERTDB\"/></CONVERTDB> "+
" <VERSION><xsl:value-of select=\"VERSION\"/></VERSION> "+
" </ROW> "+
" </xsl:for-each> "+
"</ROWSET> "+
"</INSERT>";
<?xml version="1.0" encoding="ISO-8859-1"?>


<DATABASES>
<DATABASE>
<DBID>1</DBID>
<DBNAME>xmltest</DBNAME>
<DBSIZE>1</DBSIZE>
<DBPATHNAME>E:\xmltest.mdb</DBPATHNAME>
<DBUSER>xmltest</DBUSER>
<DBPASSWORD>oracle</DBPASSWORD>
<ISAPPDB>1</ISAPPDB>
<ISATTACHEDDB>0</ISATTACHEDDB>
<CONVERTDB>1</CONVERTDB>
<VERSION>4.0</VERSION>
<TABLES>
<TABLE PRIMARY_KEY="1">
<TBLID>1</TBLID>
<DBID>1</DBID>
<TBLNAME>xsu_test</TBLNAME>
<CNVTABLESTRUCT>1</CNVTABLESTRUCT>
<CNVMOVEDATA>1</CNVMOVEDATA>
<CNVRI>1</CNVRI>
<CNVVALIDATION>1</CNVVALIDATION>
<CNVDEFAULT>1</CNVDEFAULT>
<CNVADDTIMESTAMP>1</CNVADDTIMESTAMP>
<ATTACHTABLEBACKTOACCESS>1</ATTACHTABLEBACKTOACCESS>
<SAVEPASSWORD>0</SAVEPASSWORD>
<CNVMAKEUPDATEABLE>1</CNVMAKEUPDATEABLE>
<RETAINLOCALCOPY>0</RETAINLOCALCOPY>
<SYNCWITHSERVER>1</SYNCWITHSERVER>
<OWNERID>1</OWNERID>
<VALIDATIONTEXT></VALIDATIONTEXT>
<VALIDATIONRULE></VALIDATIONRULE>
<NUMBEROFROWS>1</NUMBEROFROWS>
<CACHINGTABLE>0</CACHINGTABLE>
<DESCRIPTION></DESCRIPTION>
<COLUMNS>
<COLUMN>
<COLID>1</COLID>
<TBLID>1</TBLID>
<COLNAME>id</COLNAME>
<COLTYPE>4</COLTYPE>
<COLTYPEDESC>Long</COLTYPEDESC>
<COLAUTOINCR>1</COLAUTOINCR>
<NEXTCOUNTERVALUE>0</NEXTCOUNTERVALUE>
<MAXLENGTHSOURCE>0</MAXLENGTHSOURCE>
<AVGLENGTHSOURCE>0</AVGLENGTHSOURCE>
<COLTEXTSIZE>4</COLTEXTSIZE>
<ALLOWZEROLENGTH>0</ALLOWZEROLENGTH>
<DEFAULTVALUE></DEFAULTVALUE>
<COLREQUIRED>1</COLREQUIRED>
<COLCOLLATINGORDER>1033</COLCOLLATINGORDER>
<COLORDPOSITION>1</COLORDPOSITION>
<VALIDATIONRULE></VALIDATIONRULE>
<VALIDATIONTEXT></VALIDATIONTEXT>
<COLUMNDESCRIPTION></COLUMNDESCRIPTION>
</COLUMN>
<COLUMN>
<COLID>2</COLID>
<TBLID>1</TBLID>
<COLNAME>name</COLNAME>
<COLTYPE>10</COLTYPE>
<COLTYPEDESC>Text</COLTYPEDESC>
<COLAUTOINCR>0</COLAUTOINCR>
<NEXTCOUNTERVALUE>0</NEXTCOUNTERVALUE>
<MAXLENGTHSOURCE>0</MAXLENGTHSOURCE>
<AVGLENGTHSOURCE>0</AVGLENGTHSOURCE>
<COLTEXTSIZE>50</COLTEXTSIZE>
<ALLOWZEROLENGTH>0</ALLOWZEROLENGTH>
<DEFAULTVALUE></DEFAULTVALUE>
<COLREQUIRED>1</COLREQUIRED>
<COLCOLLATINGORDER>1033</COLCOLLATINGORDER>
<COLORDPOSITION>2</COLORDPOSITION>
<VALIDATIONRULE></VALIDATIONRULE>
<VALIDATIONTEXT></VALIDATIONTEXT>
<COLUMNDESCRIPTION></COLUMNDESCRIPTION>
</COLUMN>
</COLUMNS>
<INDEXES>
<INDEX>
<INDID>1</INDID>
<TBLID>1</TBLID>
<DBID>1</DBID>
<INDNAME>id</INDNAME>
<CNVINDEX>1</CNVINDEX>
<ISPRIMARY>0</ISPRIMARY>
<ISUNIQUE>0</ISUNIQUE>
<ISFOREIGN>0</ISFOREIGN>
<IGNORENULLS>0</IGNORENULLS>
<ISREQUIRED>0</ISREQUIRED>
<INDEX_COLUMNS>
<INDEX_COLUMN>
<INDCOLID>1</INDCOLID>
<INDID>1</INDID>
<COLID>1</COLID>
<COLORDER>1</COLORDER>
</INDEX_COLUMN>
</INDEX_COLUMNS>
</INDEX>
<INDEX>
<INDID>2</INDID>
<TBLID>1</TBLID>
<DBID>1</DBID>
<INDNAME>PK_xsu_test</INDNAME>
<CNVINDEX>1</CNVINDEX>
<ISPRIMARY>1</ISPRIMARY>
<ISUNIQUE>1</ISUNIQUE>
<ISFOREIGN>0</ISFOREIGN>
<IGNORENULLS>0</IGNORENULLS>
<ISREQUIRED>1</ISREQUIRED>
<INDEX_COLUMNS>
<INDEX_COLUMN>
<INDCOLID>2</INDCOLID>
<INDID>2</INDID>
<COLID>1</COLID>
<COLORDER>1</COLORDER>
</INDEX_COLUMN>
</INDEX_COLUMNS>
</INDEX>
</INDEXES>
</TABLE>
</TABLES>
<RELATIONS>
</RELATIONS>
</DATABASE>
<ATTACHED_TABLES>
</ATTACHED_TABLES>
</DATABASES>

Your problem is that your stylesheet is illegal.
You're using the "simple form" of the stylesheet which
is equivalent to having a single root template.
If you use the simple form, you cannot use: <xsl:include>,
<xsl:import>, <xsl:output>, <xsl:param>
or any other <xsl:XXX> element which must be at the "top-level"
of the stylesheet.
The solution is to change from:
<INPUT xsl:version="1.0" xmlns:xsl="...">
   <xsl:output>
</INPUT>.
which is illegal to:
<xsl:stylesheet version="1.0" xmlns:xsl="...">
    <xsl:output>
    <xsl:template match="/">
      <INPUT>
      </INPUT>
    </xsl:template>
</xsl:stylesheet>

Report service Integration (sql 2012 and SharePoint 2013) error Report Server WMI Provider error: Invalid namespace

Report Server WMI Provider Error: Invalid namespace
Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested, the database report server mode is native) (SQl 2012 Server)
under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
I was looking for all blogs and TechNet material but without success.

Follow these steps:
1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Apply patch to 11gR2 through OEM - ERROR: Invalid username and/or password

I am trying to apply a patch to an 11gR2 database (11.2.0.1.0) running on AIX 6.1. Using Oracle Enterprise Manager, I click on 'Software & Support' on Database tab, click on 'Patch Advisor' and click on 'Stage Patch' link. I use 'Search by number', locate the patch, click Next etc etc - select target, enter Oracle Home credentials etc. Finally I submit the patch job, and, after a minute or so I am getting 'Step: prereqCheckOnHome Initialization Error'. When looking at details of the step, I can see only:
Error Log
ERROR: Invalid username and/or password
I am at fault to understand which username/password is being referred to. I have checked Oracle Home credentials by running an OS command job with these credentials - job completed fine.
Obviously, patches can be applied the 'old' way - using OPatch from command line and then runing necessary SQL scripts, but I wanted to try new 'civilized' approach.
Anyone had this issue and know how to tackle it?
Alex

Thank you for advice. I made checks for nmo/nmb binaries permissions and made sure filesystems are mounted without nosuid option. Also, I re-entered preferred credentials (and tested them, wheneve rpossible). Enabled authentification tracing as per document, got following in emagent.trc when performing patch procedure:
2010-06-20 00:48:26,847 Thread-1066 DEBUG Dispatcher: Request ID = 2273, type = 10640, Timeout = -1
2010-06-20 00:48:26,847 Thread-1066 DEBUG Dispatcher: Adding wrapper context for request ID = 2273, batch = 0, type = 10640
2010-06-20 00:48:26,847 Thread-1066 INFO Dispatcher: nmemdisp.c: Entering nmemdisp_StreamOpReq
2010-06-20 00:48:27,327 Thread-772 INFO Authentication: Default nmo binary has setuid permissions
2010-06-20 00:48:27,327 Thread-772 DEBUG Authentication: nmejcap.c :_adjustArgsForPDP args[0] = /app/oracle/product/11.2.0/perl/bin/perl
2010-06-20 00:48:27,340 Thread-2604 DEBUG Dispatcher: Adding abort context for ID = 2273
2010-06-20 00:48:27,386 Thread-2604 DEBUG Authentication: nmejcap.c: buf=''
2010-06-20 00:48:27,386 Thread-2604 DEBUG Authentication: nmejcap: read error 7 from process
2010-06-20 00:48:27,850 Thread-2604 DEBUG Dispatcher: Removing abort context for ID = 2273
2010-06-20 00:48:27,850 Thread-2604 DEBUG Dispatcher: Removing wrapper context for asynchronous request ID = 2273
Apparentry error happens in the Perl procedure and it is not being recorded in the log file. Any further advice?
OEM Version I am using: Oracle Enterprise Manager Database Console 11.2.0.1.0
Edited by: ultradumb on Jun 20, 2010 1:18 AM

Error: Invalid interruption of a database selection

Similar Messages

Maybe you are looking for