Processchar occur error: Database selection with invalid cursor (sm21)

hi,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue , The Oracle checkpoint is not complete.
thanks,
xwu.

Similar Messages

Load data error: Database selection with invalid cursor (sm21)

hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu.

Database selection with invalid cursor with MaxDB database

Hi Experts,
I encountered the this error:
"Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed)."
We are using bw support package 19 early this month. Previously is working fine but this problem occured from the last 2 days.
We are using MaxDB database.
Really appreciate any speedy responds.

Hi,
We finally resolved the issue.
The solution:
We check the RFC connection test in SM59. There are connection error.
There is an error that related J2EE_ADMIN user.
SO we reset the J2EE_ADMIN id in SU01.
The problem goes away.
Many thanks

Database selection with Invalid Cursor error in RSDRI_INFOPROV_READ

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

Database selection with invalid cursor !

hi experts,
When execute SAP BW processchar, it occur some system error: (sm21)
Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed).
this error occur when apply bw support package 19.
sap notes 1118584 Solution is: Import Support Package 17 . but my support package is 19.
how can i solve this error?
thanks,
xwu.

I am only assuming things, but it might be worth to look closely if you were experiencing an ORA- error during the execution. This could have caused a rollback and thus closed the cursor. Please check the job log, the workprocess trace (dev_wX file) and the system log SM21 and ST22 as well.
Besides that check the oracle alertlog and the usertrace destination.
Best regards, Michael

Error "DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"

Hi Friends,
I got the following message when am trying to delete the setup tables.
" Error DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"
Am trying to delete the setup tables for application '11', but it gives me the above error. I have gone throug similar threads but it did not solve my issue.
Please can anyone provide a solution.
system detials:
R/3 release    - 4.6c
PI                 - 2004_1_46c
SAP_BW      - 30B
PI_BASIS     - 2003_1_620
Any information will be appreciated
Thanks,
VBR

Hi Kishor,
Thanks for your reply.
I have gone through that SAP Note 456102 and it was not of much help for our issue because we are ahead of PI that is mentioned in the note.
Can you send your email id so that i can forward the error screenshots.
Regards,
VBR

Need help with **** Invalid Cursor State ****

Hi,
can someone tell me why am i getting this error....
//******java.sql.SQLException: [Microsoft][ODBC Driver Manager] Invalid cursor state
Any help is greatly appreciated.....
Thanks in advance.
//***********this is the output on servlet side**************//
Starting service Tomcat-Standalone
Apache Tomcat/4.0.3
Starting service Tomcat-Apache
Apache Tomcat/4.0.3
init
DBServlet init: Start
DataAccessor init: Start
Accessor init: Loading Database Driver: sun.jdbc.odbc.JdbcOdbcDriver
DataAccessor init: Getting a connection to - jdbc:odbc:SCANODBC
username SYSDBA
password masterkey
DataAccessor init: Preparing searchPolicy
DataAccessor init: Prepared policySearch
DataAccessor init: Prepared ssnSearch
DataAccessor init: End
After the myDataAccessor
Database Connection...
in doGet(...)
SSSSSSSGetpolicynumber
In GetPolicyInformation
b05015195
Getting Policy Informaton for = b05015195
okay, building vector for policy
in GetPolicyInformation for = b05015195
starting query... policy Information
finishing query... Policy Information
Inside the while(next) loop
sun.jdbc.odbc.JdbcOdbcResultSet@4db06e
sun.jdbc.odbc.JdbcOdbcResultSet@4db06e
b05015195
policy information constructor with resultset
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Invalid cursor state
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6031)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:6188)
at sun.jdbc.odbc.JdbcOdbc.SQLGetDataString(JdbcOdbc.java:3266)
at sun.jdbc.odbc.JdbcOdbcResultSet.getDataString(JdbcOdbcResultSet.java:
5398)
at sun.jdbc.odbc.JdbcOdbcResultSet.getString(JdbcOdbcResultSet.java:326)
at sun.jdbc.odbc.JdbcOdbcResultSet.getString(JdbcOdbcResultSet.java:383)
at viewscreenappletservlet.policyinformation.<init>(policyinformation.ja
va:56)
at viewscreenappletservlet.DatabaseAccessor.getPolicyInformation(Databas
eAccessor.java:145)
at viewscreenappletservlet.Servlet.policyDisplay(Servlet.java:108)
at viewscreenappletservlet.Servlet.doGet(Servlet.java:91)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServl
et.java:446)
at org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java
:180)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:193)
at filters.ExampleFilter.doFilter(ExampleFilter.java:149)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:193)
at filters.ExampleFilter.doFilter(ExampleFilter.java:149)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:213)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:566)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(Authentica
torBase.java:475)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:
2343)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatche
rValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:
468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline
.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.jav
a:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcesso
r.java:1012)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.ja
va:1107)
at java.lang.Thread.run(Thread.java:484)
result set closed
1
sending response
Sending policy vector to applet...
Data transmission complete.

1) JDBC-ODBC driver is buggy
2) Some drivers (truly speaking most of them) doesn't
support cursors or supports them in a wrong way
Paul

Can't mount database with error Database master is invalid."

[Symptom]
======================
When you try to mount a dismounted mailbox database, you may get the following error message:
[Cause Analysis]
=======================================
This error message means that the database mentioned in the error has an invalid master. You can check the Master in EMC.
And you can also check Master using command.
In my case, I deleted DAG object from ADSIEdit. (It is not recommended to delete DAG object from ADSIEdit, this is just for test purpose.) But under the Master field, you can see that it still points to
the DN of old DAG group.
[Solution]
=======================================
Open ADSIEdit, locate a mounted database, right click on it and choose Properties, under Attribute Editor tab, find the msExchMasterServerOrAvailabilityGroup attribute. Copy the value of this attribute and then past it to the value of msExchMasterServerOrAvailabilityGroup
attribute in the affected mailbox database.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ():
I am not able to mount an Oracle database.<HR></BLOCKQUOTE>
Hi ()
My problem is accessing the database with sqlplus system/manager @oralin, on page 55 of the Linux starter kit. Do you notice the space here, between system/manager.. and.. @oralin. I think it needs to be there.
Is your database named Chestnut?
And for Startup, why are you using init.ora? the book mentions initoralin.ora on page 43.
Your configurations are different than recommended in the book. I'm not sure if any of this helps, but maybe you can help me. When I try sqlplus system/manager @oralin, the response is: can't connect to oralin.sql.
According to the book, I need to use @oralin at the end of the command in order to see if I have properly configured the server for MTS, a multithreaded server.
Any ideas? I hope I can help further.
gilles56

Error while working with ref cursor

Hi I tried the following but getting the err
DECLARE
TYPE ref_nm IS REF CURSOR;
vref REF_NM;
vemp emp%rowtype;
BEGIN
OPEN vref FOR SELECT ename ,sal FROM EMP;
LOOP
FETCH vref INTO vemp;
EXIT WHEN vref%NOTFOUND;
DBMS_OUTPUT.PUT_LINE ( vemp.ename ||','||vemp.sal );
END LOOP;
CLOSE vref;
END;Error is
ORA-06504: PL/SQL: Return types of Result Set variables or query do not match

Syntactically correct - but a horrible approach performance wise if you only need specific columns.
The basic problem here is using the wrong tool. A ref cursor. Why? There's no reason in this code for using a ref cursor. Using a standard cursor data type addresses the requirement a lot better.
As you can define the cursor:
cursor myCursor is select c1, c2 from tab1;
You can define an array data type for fetching that cursors data - and thus definition does not need to be touched when you change the cursor itself to include/exclude columns:
type TMyCursorBuffer is table of myCursor%RowType;
And finally you can define a bulk collection buffer for bulk processing the output of the cursor:
myBuffer TMyCursorBuffer;

Going on my nerf with Invalid cursor state

Hi all,
It's going to make me mad : i can't retrieve value from resultset
for(int t=0;t<Integer.parseInt(request.getParameter("ResList"));t++)
ran=(int)(Math.random()*(maximum-minimum))+(minimum+1);
System.out.println("Voici le chiffre randomiser : " + ran);
renstr=entete+ran;
System.out.println("Voici le str randomiser : " + renstr);
psQuery= " SELECT Case_ID_, create_time, Requester_Name_,Description from aradmin.helpdeskcases where Case_ID_='" + renstr + "'";
System.out.println("La reQ :" + psQuery);
rs=statement.executeQuery(psQuery);
//num=rs.getString("Case_Id_");
//System.out.println("Contenu de num : " + num);
result[t]=rs.getString(1);
System.out.println("Le tabl:" + result[t]);
//n++;
//result[n]=rs.getString("Requester_name_");
//n++;
//result[n]=rs.getString("Description");
}

Maybe you don't have the record in the database where Case_ID_= dynamic value.
Try to print the value of renstr(your dynamic value) and then print the query.
Then run the same query as printed in the web page in your database. If you find records then try below in your jsp.
rs=statement.executeQuery(psQuery);
while(rs.nest()) {
result[t]=rs.getString(1);
System.out.println("Le tabl:" + result[t]);
Rakesh.

Database selection was interrupted (see long text) Error

Hi
Please let me know the process to resolve this error on DTP in BI, when i repeat this DTP it is failing again. and the most of the transferred records are added to the target DSO.
Error: Database selection was interrupted (see long text)

Hi:
Please check if any of the SAP Notes below helps you in solving this issue.
Note 1285640 - 70SP21: "Database selection was interrupted"
Note 1518750 - Additional trace messages in the DTP request log
Note 1519889 - DTP processing: "Database selection was interrupted"
Regards,
Francisco Milán.

Java.sql.SQLException: Invalid cursor position on saving

Dear all
I'm having a problem with saving components on a JSF page. The page is plit in two parts:
1. Save report details, which are being saved correctly. Here is the code
public String btnSaveReport_action() {
        // TODO: Process the button click action. Return value is a navigation
        // case name where null will return to the same page.
        System.out.println("Saving the report ... forsi");
        int seqNumber = SequenceNumber.getNextSequenceNo("TB_REPORTS");
        getSessionBean1().setReportFK(seqNumber);
        String reportId = "REP_" + ((String)tfReportName.getText()).replace(' ', '_').trim();
        System.out.println("ReportFK in btnSaveReport: " + getSessionBean1().getReportFK());
        //SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy");
        System.out.println("Start Date: " + calRepStartDate.getSelectedDate());
        //error(calRepStartDate.getValue().toString());
        //System.out.println("getvalue" + calRepStartDate.getValue());
        try {
            rk = tb_reportsDataProvider.appendRow();
            tb_reportsDataProvider.setCursorRow(rk);
            System.out.println("Setting Values ...");
            tb_reportsDataProvider.setValue("REP_PK", new Integer(seqNumber));
            tb_reportsDataProvider.setValue("REP_ID", reportId);
            tb_reportsDataProvider.setValue("REP_ACTIVE", "Y");
            tb_reportsDataProvider.setValue("REP_SESSION_FK", new Integer(getSessionBean1().getSessionId()));
            tb_reportsDataProvider.setValue("REP_NAME", (String)tfReportName.getText());
            tb_reportsDataProvider.setValue("REP_START_DATE", new java.sql.Date(calRepStartDate.getSelectedDate().getTime()));
            tb_reportsDataProvider.setValue("REP_END_DATE", new java.sql.Date(calRepEndDate.getSelectedDate().getTime()));
            System.out.println("Committing Changes ...");
            tb_reportsDataProvider.commitChanges();
            System.out.println("Refreshing Row ...");
            tb_reportsDataProvider.getCachedRowSet().refreshRow();
            getSessionBean1().getTb_reportsRowSet().refreshRow();
//            tb_reportsDataProvider.refresh();
//            System.out.println("Refreshing Row ...");
//            tb_reportsDataProvider.setCursorRow(tb_reportsDataProvider.findFirst("REP_PK",new Integer(seqNumber)));
            info("Report Data Saved Successfully!");
        } catch (SQLException sqle) {
            /* error("Cannot update report (SQLException): " +
                    reportId +
                    " : " + sqle.getMessage()); */
            log("Cannot update report (SQLException): " +
                    reportId +
                    " : " + sqle);
            info("Could not save report: " + sqle.getMessage());
            sqle.printStackTrace();
        //tfReportName.setValueBinding("sourceData", getApplication().
        //    createValueBinding("#{newReport.tb_reportsDataProvider}"));
        //tfReportName.setValueBinding("text", getApplication().createValueBinding            ("#{newReport.tb_reportsDataProvider.value['REP_NAME']}"));
        // calRepStartDate.setValueBinding("sourceData", getApplication().
        //    createValueBinding("#{newReport.tb_reportsDataProvider}"));
        //calRepStartDate.setValueBinding("selectedDate", getApplication().createValueBinding            ("#{newReport.tb_reportsDataProvider.value['REP_START_DATE']}"));
        //calRepEndDate.setValueBinding("sourceData", getApplication().
        //    createValueBinding("#{newReport.tb_reportsDataProvider}"));
        //calRepEndDate.setValueBinding("selectedDate", getApplication().createValueBinding            ("#{newReport.tb_reportsDataProvider.value['REP_END_DATE']}"));
        info("Report Name: " + tb_reportsDataProvider.getValue("REP_NAME"));
        tfReportName.validate(this.getFacesContext());
        calRepStartDate.validate(this.getFacesContext());
        calRepEndDate.validate(this.getFacesContext());
        tfReportName.setDisabled(true);
        calRepStartDate.setDisabled(true);
        calRepEndDate.setDisabled(true);
        btnNewQuery.setDisabled(false);
        btnSaveReport.setDisabled(true);
        return null;
    }The problem is that the reportFK is losing its value when I submit the page the second time! I am trying to get the value from the provider or from the rowset, but none work. Here is the code I am trying ...
public String btnSaveQuery_action() {
        // TODO: Process the button click action. Return value is a navigation
        // case name where null will return to the same page.
        int seqNumber = 0;
        // Save the query header details to the database
        try {
            // Start with the query - needed for the link table
            seqNumber = SequenceNumber.getNextSequenceNo("TB_QUERY");
            String queryId = "QRY_" + ((String)tfQueryName.getText()).replace(' ', '_').trim();
            tb_queryDataProvider.setCursorRow(queryRowKey);
            tb_queryDataProvider.setValue("QRY_PK", new BigDecimal(seqNumber));
            tb_queryDataProvider.setValue("QRY_CODE", queryId);
            tb_queryDataProvider.setValue("QRY_NAME", (String)tfQueryName.getText());
            tb_queryDataProvider.setValue("QRY_ACTIVE", "Y");
            tb_queryDataProvider.setValue("QRY_SESS_FK", new BigDecimal(getSessionBean1().getSessionId()));
            System.out.println("Committing Changes ...");
            tb_queryDataProvider.commitChanges();
            System.out.println("Refreshing Row ...");
            tb_queryDataProvider.setCursorRow(tb_queryDataProvider.findFirst("QRY_PK",new Integer(seqNumber)));
            getSessionBean1().getTb_queryRowSet().refreshRow();
            info("Query Data Saved Successfully!");
        } catch (Exception ex) {
            error("Error while saving query: " + ex.getMessage());
            log("Error while saving query" + ex);
            ex.printStackTrace();
        // Now save the link
        try {
            // Start with the query - needed for the link table
            String sql = "INSERT INTO TB_LINK_REPORT_QUERY ( " +
               "LRQ_PK, LRQ_REP_FK, LRQ_QRY_FK, " +
               "LRQ_TYPE, LRQ_START_DATE, LRQ_END_DATE, " +
               "LRQ_ACTIVE, LRQ_SESS_FK) " +
               "VALUES (?,?,?,?,?,?,?,?)";
            System.out.println("Trying to do the link");
            int linkSeqNumber = SequenceNumber.getNextSequenceNo("TB_LINK_REPORT_QUERY");
            PreparedStatement pstmt = DBConnection.getConnection().prepareStatement(sql);
            if (getSessionBean1().getReportFK() == -1 || getSessionBean1().getReportFK() == 0)
                System.out.println("reportFK = -1 or 0!!! Trying from provider.");
                System.out.println("Report PK is: " + getSessionBean1().getTb_reportsRowSet().getBigDecimal("REP_PK"));
                getSessionBean1().setReportFK(((Integer)tb_reportsDataProvider.getValue("REP_PK")).intValue());
            System.out.println("Report Foreign Key: " + getSessionBean1().getReportFK());
            System.out.println("Query Foreign Key: " + seqNumber);
            pstmt.setInt(1, linkSeqNumber);
            pstmt.setInt(2, getSessionBean1().getReportFK());
            pstmt.setInt(3, seqNumber);
            pstmt.setString(4, (String)dropDownQueryType.getSelected());
            pstmt.setDate(5, new java.sql.Date(calendarQueryStartDate.getSelectedDate().getTime()));
            pstmt.setDate(6, new java.sql.Date(calendarQueryEnd.getSelectedDate().getTime()));
            pstmt.setString(7, "Y");
            pstmt.setInt(8, getSessionBean1().getSessionId());
            System.out.println("Committing Changes for Link ...");
            pstmt.executeUpdate();
            DBConnection.getConnection().commit();
            System.out.println("Refreshing Row in link ...");
            getSessionBean1().getTb_link_report_queryRowSet().setObject(
                    1, new Integer(linkSeqNumber));
            getSessionBean1().getTb_link_report_queryRowSet().setObject(
                    2, new Integer(getSessionBean1().getReportFK()));
            getSessionBean1().getTb_link_report_queryRowSet().setObject(
                    3, calendarQueryStartDate.getSelectedDate());
            getSessionBean1().getTb_link_report_queryRowSet().setObject(
                    4, calendarQueryEnd.getSelectedDate());
            tb_link_report_queryDataProvider.refresh();
            info("Link Data Saved Successfully!");
        } catch (Exception ex) {
            error("Error while saving query: " + ex.getMessage());
            log("Error while saving link: " + ex);
            ex.printStackTrace();
        return null;
    }The part saving the query with the provider is working correctly. But the part with the link is not working at all (the part with the PreparedStatement). The fact is that the PreparedStatement cannot be executed because I am getting the error at the line
System.out.println("Report PK is: " + getSessionBean1().getTb_reportsRowSet().getBigDecimal("REP_PK"));Can anyone help please?
Thanks and Regards
Joseph

guys if any of you have an idea just post it. It would be of great help for me. I can't figure out my mistake and its been 2days already and still i am stuck with my problem.
It displays the table but there is an error "java.sql.SQLException: Invalid cursor position" so i cannot put the counter to the session.

SAP Message No-KL 294 Network Activity with invalid Internal Number

Hi,
I am getting System Error:NETWORK ACTIVITY WITH INVALID INTERNAL NUMBER" while doing MIGO.
I have checked network activity assigned to PO is exist but this shows some internal Number "Plan no.f.oper." which does not exist.
Please let me know how should i solve this error.
thanks
Sunil

Hi Sunil.
Did you get any response from SAP?
I have as similar or maybe the same problem.
And I found out:
When I create the purchase request out of the Project-Builder (CJ20n) - SAP seems to lose the entry of the field 'AUFPL' in the table 'EBKN'.
In these rare cases (this problem is only in about 2-3 % of our purchase requests) the network elements still exist - so they are not deleted or something like that.
I created a routine, in which I read the entry of 'AUFPL' with the corresponding network number out of table 'EBKN' as key, to correct these wrong purchase requests.
But I didn't find the reason for the problem, yet.
Every advice would be great,.
Best regards,
Marc

Error: Invalid interruption of a database selection

Hi,
When i execute the below code, the output is displayed without any problem.
<b>tables lfa1.
select * from lfa1 order by lifnr.
write / lfa1-lifnr.
endselect.</b>
But however when i debug this piece of code, i get an error as below.
ShrtText - Invalid interruption of a database selection
Runtime Errors - DBIF_RSQL_INVALID_CURSOR
Exceptn - CX_SY_OPEN_SQL_DB
Can anybody help me with the reason for the occurence of this problem.

Hi Vijay,
Just go through the following link:
Re: DBIF_RSQL_INVALID_CURSOR dump during debugging
As Sooness pointed out, SELECT-ENDSELECT dumps only the first time. Try re-executing it and it will work fine.
Meanwhile, it is always better to use INTO TABLE OF instead of SELECT-ENDSELECT, as this minimizes database hits.
Regards
Anil Madhavan

Payables Open Interface Purge completes with error "Invalid Cursor"

Hello,
I'm trying to run Payables Open Interface Purge (version 115.8) and get an invalid cursor error in the beforereport trigger. Does anyone know the cause and remedy of this? A portion of the log is below. I've looked at the cursor and everything looks fine to me.
MSG-00001: (Import_purge 1) Check control table for the purge process
MSG-00001: (Check_control_table 1) Lock the control table
MSG-00003: (Check_control_table 2) Fetch import_requests
MSG-00004: (Check_control_table 3) Check concurrent program status
MSG-00999: FUNCTION GET_REQUEST_STATUS ERROR, Reason:
MSG-00999: FND_CONCURRENT.GET_REQUEST_STATUS<-Check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: (Import_purge 1) Check control table for the purge process
MSG-00999: Delete record in control table..
MSG-00999: ORA-01001: invalid cursor
REP-1419: 'beforereport': PL/SQL program aborted.
Thank you.

I'm trying to run Payables Open Interface Purge (version 115.8) and get an invalid cursor error in the beforereport trigger. Does anyone know the cause and remedy of this? A portion of the log is below. I've looked at the cursor and everything looks fine to me.
MSG-00001: (Import_purge 1) Check control table for the purge process
MSG-00001: (Check_control_table 1) Lock the control table
MSG-00003: (Check_control_table 2) Fetch import_requests
MSG-00004: (Check_control_table 3) Check concurrent program status
MSG-00999: FUNCTION GET_REQUEST_STATUS ERROR, Reason:
MSG-00999: FND_CONCURRENT.GET_REQUEST_STATUS<-Check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: check_control_table<-Import_purge<- Before report trigger <- APXIIPRG
MSG-00999: (Import_purge 1) Check control table for the purge process
MSG-00999: Delete record in control table..
MSG-00999: ORA-01001: invalid cursor
REP-1419: 'beforereport': PL/SQL program aborted.11i: Payables Open Interface Invoice Import Troubleshooting Guide (APXIIMPT) [ID 107628.1] -- 3. Open Interface Import Purge Fails with ORA-01001: Invalid Cursor
Thanks,
Hussein

Processchar occur error: Database selection with invalid cursor (sm21)

Similar Messages

Maybe you are looking for