"error: \lib (access is denied)" when trying to deploy

I have a sql server stored proc that I have successfully created the artifacts for as specified in documentation I had rec'd in a prior thread. Now, when I go to deploy, I immediately get the error:
"error: \lib (access is denied)"
I have verified the path to the lib folder as specified in my genterate.bat file to create the artifacts. It is shown below. I am not sure what I need to do.
SETLOCAL
@echo Generating BPEL artifacts for %1
@echo off
@echo off
set PROPERTIES=DCSD_SIPA_FEE_UPDATE.properties
set J2EE_HOME=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133\integration\lib
set OC4J_HOME=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133
set JDBC_HOME=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133\lib
set JDBC_DRIVER=%JDBC_HOME%\sqljdbc.jar
set JAVA_HOME=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133\jdk
set JAVA_CLASSPATH=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133\lib
set ARTIFACTS_CLASSPATH=%MY_CLASSPATH%;%JAVA_CLASSPATH%;%J2EE_HOME%\DBAdapter.jar;%J2EE_HOME%\bpm-infra.jar;%J2EE_HOME%\connector15.jar;%J2EE_HOME%\orabpel.jar;%JDBC_HOME%\xmlparserv2.jar;%OC4J_HOME%\toplink\jlib\toplink.jar;%JDBC_DRIVER%
"%JAVA_HOME%\bin\java" -cp "%ARTIFACTS_CLASSPATH%" oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts %PROPERTIES%
----------------

at which step do you try to navigate or generate something to this lib folder? (can you paste that code? )
you do this by using a full path or relative ?

Similar Messages

"Access is Denied" when trying to RDP to Server 2012

When attempted to RDP to a Windows Server 2k12, occasionally I will receive a "Access is Denied" error after entering credentials. Direct console access works fine. Attempted to RDP to 2k12 server with Win XP, Win7x64 Pro, Win 8.1, WinServer2k3
and WinServer2k12, however no connection was made. If we reboot the Win2k12 server, RDP works fine for an unknown amount of time. Usually this issue will happen on a Friday, we reboot, RDP works, come in Monday morning, and it does not work.
Followed steps in the following article, however issues persists.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8405bed7-57a8-4b54-b968-6b0e00f367dd/access-is-denied-remote-desktop
Also followed this article, however issue persisted:
http://blogs.technet.com/b/askperf/archive/2010/07/08/the-case-of-the-mysterious-access-denied-aka-more-on-service-hardening.aspx
I'm gathering more information such as Event Viewer logs, screenshots, and Registry entries.
Thanks in advance!

I have found the answer. This server is a Terminal Server, and it could not connect with the RD Host. After changing some local DNS settings and disabling un-used NIC's, I was able to get a good connection and RDP successfully.

My access is denied when trying to save a file

I am having trouble saving a downloaded file. I get a message "Access Denied". I tried uninstalling and downloading again, but that did not help.

After the download the file is on your system.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

When editing DHCP Scope in IPAM, get "Error: 5 - Access is denied"

Hello all!
I have a pair of Server 2012 DHCP servers configured for Failover. I also have a Server 2012 IPAM server that manages the first server in that pair, but not the second one. The reason is that I have the DHCP Failover Auto Config Sync tool running
on the first server and it can only be installed on one server of a Failover pair.
So, my diagram would look something like this:
IPAM --manages--> DHCP 1 <--Failover/Auto Sync--> DHCP 2
So, here is my problem. I can make a change to a DHCP Scope directly on DHCP 1 and it is instantaneously replicated to DHCP 2. That is no problem.
But, when I try to edit the same Scope through IPAM, it fails and returns the following error: (Error:5 - Access is denied.)
Any help would be greatly appreciated.
Thanks!

Hi,
One of our service engineers here was able to reproduce the problem by removing the
IPAM computer account from the IPAMUG security group in Active Directory.
Interestingly, doing this does not change the status of the server from green to red in terms of manageability.
Can you please check and see if this is the problem?
Thanks,
-Greg
P.S. If this is not the problem, please answer a few more questions:
Is the IPAM and DHCP server joined to the same domain?
Are they multihomed servers or have only one NIC?
Are you using the same user account on IPAM and DHCP server?
Note: I tried reproducing this and when the IPAM server is removed from the IPAMUG group it does cause Error 5 - Access is denied, however I was able to get the status to turn red after doing this. I think it is critical that an Active Directory update
occur, so you should try running gpupdate /force on your DC, DHCP server, and IPAM server.

I receive "Database access denied" when trying to add component 4543BD

I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0 Student edition.
Solved!
Go to Solution.

Hi Diarra,
I checked my database and the 4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message.
Attached is a schematic with the part, you can open it and build you circuit around it.
Tien P.
National Instruments
Attachments:
4543.ms12 ‏62 KB

Error 5: Access is Denied While using OSCDIMG to create Winpe x86 ISO with Deployment Tools Command Prompt

Technician computer is Windows 7 HP x64.
Running latest version of WAIK.
Goal: To make a Winpe disc for each processor architecture (AMD64, x86, IA64) with an included Gimage.exe using this code for the default startnet.cmd file found in system32 directory of winpe boot.wim
wpeinit
if /i %PROCESSOR_ARCHITECTURE%==amd64 (
cd x64
start gimagex.exe
if /i %PROCESSOR_ARCHITECTURE%==ia64 (
cd x64
start gimagex.exe
if /i %PROCESSOR_ARCHITECTURE%==x86 (
cd x86
start gimagex.exe
These are the commands I have processed for the x86 variant:
copype x86 c:\pe\x86\
Dism /mount-wim /wimfile:C:\pe\x86\winpe.wim /index:1 /mountdir:C:\mount
**It is at this point I copy over my x86 folder, x64 folder, and overwrite the startnet.cmd file.
dism /unmount-wim /mountdir:C:\mount /commit
oscdimg -n bc:\pe\x86\etfsboot.com c:\pe\x86\iso c:\pe\x86.iso
^^It is at this command I receive this error:
ERROR: Could not delete existing file "c:\pe\x86\iso"
Error 5: Access is denied.
Please note that all commands before were hand-typed, no copy or pasting from any directory or .chm
One thread referred to some Application Management service, but I can report that there is no such service installed in my machine.
Thank You!
UPDATE:
I copied the winpe.wim file from the x86 root directory into the iso directory and renamed it to boot.wim Now, if I copy the contents to a flash drive and put it into a client
computer, it boots to the PE perfectly, script and all.
However, when trying to use the oscdimg command, I do get an .iso successfully, but when I burn it, I don't know what to do in the way of boot options, and if I keep defaults (imgburn)
it results in an un-bootable dvd.
Suggestions are greatly appreciated.

Don't copy and paste instead type manually it will work.
[email protected]
OMG! Yes, you are correct ... but I have no idea why! I retyped the command line:
oscdimg -n -be:\winpe_amd64\etfsboot.com e:\winpe_amd64\ISO e:\winpe_amd64\winpe_amd64.iso
into Notepad, and then pasted it into the Command Prompt, and it worked!
Perhaps there must be some hidden characters included when pasting directly, even though I first pasted the command line into Notepad, and then into Command Prompt
(C:\Program Files\Windows AIK\Tools\PETools>).
I had to retype the command line in Notepad before copying and pasting, before it would work.
Wow, thanks!
Cheers, Navy Flyer

License Error: -2147024891 Access Is Denied.

Hi
Iu2019m having issue with running SAP Business one client on Terminal services Server (windows 2008 server)
SAP Business one version:
2004A (6.70.190) SP: 00 PL:32
License server on the remote Server.
What strange is, it works fine for the administrator but not for domain user.
When domain user trying to log in the error message comes up u201CLicense Error: -2147024891 Access Is Denied.u201D (see attached screenshot)
Do I need to give any additional permissions to DCOM object?
Please help
Gary

Hi to All,
We are upgrading SAP B1 2007B PL 19 to SAP B1 8.8 PL 10, upgrade is done successfully but licenses are not working in SAP B1 8.8 PL 10 earlier we have 6 licenses in SAP B1 2007B. After Upgrade system is giving error message like
YOU CAN'T OPEN WINDOW 40005 CALANDER FROM WITH YOUR CURRENT LICENSE
Please Help me what to do?
Regards,
SRINI

Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi,
Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi Shilpa ,
Please refer to the following link and see if that helps you out.
https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
Are you trying to access the PDF with Acrobat or Adobe Reader?
Regards
Sukrit Dhingra

Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.

Hi Everyone,
Whenever I install some new software in my new laptop I get this error:-
Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
I have tried synchronizing the clocks but it doesn't remove the problem.
These softwares work on another laptop that i have, which also runs windows 7.
Can someone please tell me the solution as this is extremely urgent.
Thanks In Advance.
-Michael

In short:
============
My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
In detail:
============
Problem:
Failed to install this application
- http://www.ssware.com/cryptoobfuscator/download.htm
- on Windows 8.1 x64
- Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
First Candidate Solution
The issue turns out to NOT be security rights on the Temp folder
ESET Smart Security HIPS Advanced Memory Scanner is the cause
http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html*

Getting bad host error when trying to deploy simple web sample application

hi,
Can someone tell me why I'm getting this error when trying to deploy the simple web application from samples
This is what it said:
deploy_common:
[echo] Deploying ../assemble/war/webapps-simple.war.
[exec] java.net.MalformedURLException: Bad host: station_1
thanks

Hi,
Another update on this issue.
To remove the error that we were getting (java.lang.LinkageError: Class javax/xml/transform/Source violates loader constraints), we tried some searching around and found out that the way to fix it is to provide correct versions of xalan.jar, xml-apis.jar and xercesImpl.jar. We downloaded the required version from the apache site and added it to our WEB-INF/lib folder in the WAR file.
Now, we are getting this error:
XPathFactory#newInstance() failed to create an XPathFactory for the default object model: http://java.sun.com/jaxp/xpath/dom with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: No XPathFctory implementation found for the object model: http://java.sun.com/jaxp/xpath/dom
What else we might be missing in our libs or do we need to check some other configurations?
Any help on this would be much appreciated.
Thanks,
Gaurav

Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.).

SQL 2005 Enterprise
Even if I logon as Administrator and try to backup any of my databases to local partitions, I get this error below. I have been operating fine up until this point and doing backups all the time. As far as I know, and after checking, no permissions have changed and of course Administrator has ntfs permissions to my local C and other partitions on this server:
TITLE: Microsoft SQL Server Management Studio
Backup failed for Server 'servername'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.). (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
BUTTONS:
OK
In the Event log for Windows Server 2003 I see this:
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10016
Date:  3/6/2006
Time:  3:35:06 PM
User:  NT AUTHORITY\NETWORK SERVICE
Computer: servername
Description:
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{BA126AD1-2166-11D1-B1D0-00805FC1270E}
to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20). This security permission can be modified using the Component Services administrative tool.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

SQL Service account is DOMAIN\SQLAdmin
Have given the SQLAdmin AD account access to the Backup shares on the file servers (2 file servers, FILE1, FILE2)
and I still get the error
Operating system error 5(Access is denied.).
RESTORE FILELISTONLY
FROM DISK = N'\\SERVER\APPS\backups\UA\DB\DB.BAK'
I trid to attach it as device, which runs
sp_addumpdevice 'disk', 'Network_Share', '\\SERVER\backup\APPS\UA\DB\DB.BAK'
BUT when restoring, same error occurred (Access denied)
Only case I can backup/restore to/from network shares, is from the machines where SQL Server runs (SQL1, SQL2)
e.g. I copy the BAK file from FILE1 to SQL2, share the folder (add SQLAdmin account with access), then restore on SQL1 with file from SQL2 Share
RESTORE FILELISTONLY
FROM DISK = N'\\SQL2\backups\UA\DB\DB.BAK'

Reading Mount Information getting Error 5 Access is Denied

Dear SAPgurus,
I am trying to install SAP ECC 5 IDES version from windows server 2003 OS, the central instance installation is giving error "Access is Denied" While reading mount information for C:\.
While my windows server 2003 is installed on drive D. I am having windows Vista on Drive C:\ which is preloaded while buying laptop.
I am logged in as Built-In Administrator user id.
The message in the log looks like this:
Trace
reading mount information for 'C:/
Error 2007-11-06
FSL-06002 Error 5 (Access is denied) in execution of a 'FindFirstVolumeMountPoint' function, line (439), with parameter (
?\Volume(e0eeecd3-8a43-11dc-bda5-806e6f6e6963)\)
Error
MOS-01235 Module function getInfo of module CIA0smount failed.

I have the same problem.
I bought my machine with Vista preloaded. I installed Windows 2003 on it. - using a fresh 2003 Enterprise Server Windows 2003 disk.
Now, While installing the SAP R/3 4.7x, I am getting the same error. Do you all think that I should add the permissions to SAP id's and then try. I am doing all the work as the system administrator. I also gave full permissions to all the drives. But one thing I did not do is to create partitions.
I have C: Drive and H Drive.
I installed my Windows 2003 on H drive and I now want to install SAP on the C drive. Would that be a problem.
Here are my details:
Machine: 2003 Enterprise
RAM: 5 GB ( Yes, It is 5 )
Hard Drive: SATA RAID Intel
Partitions: C: ( 220GB) and H: 10GB
Database: Oracle 9.2.1 with patches
SAP: 4.7x
I keep getting the Access denied error all the time.
Please help.
SAPuser.

UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered. Master

I am getting the following event every minute in the event log:
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered. Master
+
System
Provider
[ Name]
MSSQLSERVER
EventID
17053
[ Qualifiers]
49152
Level
2
Task
2
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-07-07T10:55:22.000000000Z
EventRecordID
4171276
Channel
Application
Computer
ClinSQL.clinlogix.com
Security
EventData
UpdateUptimeRegKey
5(Access is denied.)
9D420000100000000800000043004C0049004E00530051004C000000070000006D00610073007400650072000000
Binary data:
In Words
0000: 0000429D 00000010 00000008 004C0043
0008: 004E0049 00510053 0000004C 00000007
0010: 0061006D 00740073 00720065 0000
In Bytes
0000: 9D 42 00 00 10 00 00 00 B......
0008: 08 00 00 00 43 00 4C 00 ....C.L.
0010: 49 00 4E 00 53 00 51 00 I.N.S.Q.
0018: 4C 00 00 00 07 00 00 00 L.......
0020: 6D 00 61 00 73 00 74 00 m.a.s.t.
0028: 65 00 72 00 00 00 e.r...
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider
Name="MSSQLSERVER" />
<EventID Qualifiers="49152">17053</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2012-07-07T10:55:22.000000000Z" />
<EventRecordID>4171276</EventRecordID>
<Channel>Application</Channel>
<Computer>ClinSQL.domain.com</Computer>
<Security
/>
</System>
- <EventData>
<Data>UpdateUptimeRegKey</Data>
<Data>5(Access is denied.)</Data>
<Binary>9D420000100000000800000043004C0049004E00530051004C000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
Appears to be with the Master database. I tried changing the SA password but did not correct the problem.
Any ideas?

UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered. Master
It looks like the SQL Server service account doesn't have the needed registry permissions. This may be because the account was changed directly using service control manager instead of using the SQL Server Configuration tool.
Try changing the SQL Server service account using the SQL Server Configuration tool to another account temporarily and then back to the desired one and restart SQL Server. This should assign the permissions the service account requires.
Dan Guzman, SQL Server MVP, http://weblogs.sqlteam.com/dang/

"error: \lib (access is denied)" when trying to deploy

Similar Messages

Maybe you are looking for