Error loading applet from TINI

when i try to load my applet from the TINI board i get an error saying
Exception: java.lang.NumberFormatException: Tini OS 1.02e. also at the bottom of the window there is a message saying:
Applet Test5Applet notinited
i am new to this stuff, anyone any ideas?
stevie

did you every fine out how to do this??
i am now having the same problem and at my wits end on what to do?
thanks

Similar Messages

Net.sf.jasperreports.engine.JRException: Error loading object from file : C

I started using JasperReports for my web application report generation. I'm using JSPs for web development.
I created a .jrxml file using iReport and used the following code to generate the report.
try {
          JasperDesign jasperDesign = JRXmlLoader.load("C:\\tomcat\\webapps\\web\\JSP\\reports\\samples\\pmm-final.jrxml");
          JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
// Second, create a map of parameters to pass to the report.
          Map parameters = new HashMap();
          parameters.put("Title", "JasperReport");
// Third, get a database connection
          Connection conn = null;
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          conn=DriverManager.getConnection("jdbc:odbc:driver={Microsoft Access Driver (*.mdb)};DBQ=C:/tomcat/webapps/db1/db1.mdb");
// Fourth, create JasperPrint using fillReport() method
          JasperPrint jasperPrint = JasperFillManager.fillReport(jasperReport,
                              parameters, conn);
// You can use JasperPrint to create PDF
          //JasperExportManager.exportReportToPdfFile(jasperPrint, "C:\\tomcat\\webapps\\web\\JSP\\reports\\TestReport.pdf");
          JasperExportManager.exportReportToHtmlFile(jasperPrint, "C:\\tomcat\\webapps\\web\\JSP\\reports\\TestPMM.html");
          JRXlsExporter exporter = new JRXlsExporter();
          exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
          exporter.setParameter(JRExporterParameter.OUTPUT_FILE_NAME, "C:\\tomcat\\webapps\\web\\JSP\\reports\\TestPMM.xls");
          exporter.exportReport();
// Or to view report in the JasperViewer
          //JasperViewer.viewReport(jasperPrint);
} catch (JRException e) {
          // TODO Auto-generated catch block
          e.printStackTrace();
} catch (SQLException e) {
          // TODO Auto-generated catch block
          e.printStackTrace();
The above pmm-final.jrxml uses a subreport 'top.jasper'. Error being thrown while loading top.jasper file. Error is as follows.
java.io.InvalidClassException: net.sf.jasperreports.engine.base.JRBaseReport; lo
cal class incompatible: stream classdesc serialVersionUID = 604, local class ser
ialVersionUID = 606
at java.io.ObjectStreamClass.initNonProxy(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:86
at net.sf.jasperreports.engine.util.JRLoader.loadObjectFromLocation(JRLo
ader.java:236)
at net.sf.jasperreports.engine.fill.JRFillSubreport.evaluate(JRFillSubre
port.java:295)
at net.sf.jasperreports.engine.fill.JRFillBand.evaluate(JRFillBand.java:
340)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageBand(JRVert
icalFiller.java:1224)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageHeader(JRVe
rticalFiller.java:353)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReportStart(JRV
erticalFiller.java:205)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReport(JRVertic
alFiller.java:119)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
613)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
483)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:77
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillMa
nager.java:248)
at org.apache.jsp.JSP.UserGuide_jsp._jspService(org.apache.jsp.JSP.UserG
uide_jsp:74)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:2
95)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
a:148)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:306)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:385)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:745)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
va:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:868)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:684)
at java.lang.Thread.run(Unknown Source)
NESTED BY :
java.io.InvalidClassException: net.sf.jasperreports.engine.base.JRBaseReport; lo
cal class incompatible: stream classdesc serialVersionUID = 604, local class ser
ialVersionUID = 606
at java.io.ObjectStreamClass.initNonProxy(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:86
at net.sf.jasperreports.engine.util.JRLoader.loadObjectFromLocation(JRLo
ader.java:236)
at net.sf.jasperreports.engine.fill.JRFillSubreport.evaluate(JRFillSubre
port.java:295)
at net.sf.jasperreports.engine.fill.JRFillBand.evaluate(JRFillBand.java:
340)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageBand(JRVert
icalFiller.java:1224)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageHeader(JRVe
rticalFiller.java:353)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReportStart(JRV
erticalFiller.java:205)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReport(JRVertic
alFiller.java:119)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
613)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
483)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:77
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillMa
nager.java:248)
at org.apache.jsp.JSP.UserGuide_jsp._jspService(org.apache.jsp.JSP.UserG
uide_jsp:74)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:2
95)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
a:148)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:306)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:385)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:745)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
va:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:868)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:684)
at java.lang.Thread.run(Unknown Source)
NESTED BY :
net.sf.jasperreports.engine.JRException: Error loading object from file : C:\tom
cat\webapps\web\JSP\reports\samples\top.jasper
at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:90
at net.sf.jasperreports.engine.util.JRLoader.loadObjectFromLocation(JRLo
ader.java:236)
at net.sf.jasperreports.engine.fill.JRFillSubreport.evaluate(JRFillSubre
port.java:295)
at net.sf.jasperreports.engine.fill.JRFillBand.evaluate(JRFillBand.java:
340)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageBand(JRVert
icalFiller.java:1224)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillPageHeader(JRVe
rticalFiller.java:353)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReportStart(JRV
erticalFiller.java:205)
at net.sf.jasperreports.engine.fill.JRVerticalFiller.fillReport(JRVertic
alFiller.java:119)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
613)
at net.sf.jasperreports.engine.fill.JRBaseFiller.fill(JRBaseFiller.java:
483)
at net.sf.jasperreports.engine.fill.JRFiller.fillReport(JRFiller.java:77
at net.sf.jasperreports.engine.JasperFillManager.fillReport(JasperFillMa
nager.java:248)
at org.apache.jsp.JSP.UserGuide_jsp._jspService(org.apache.jsp.JSP.UserG
uide_jsp:74)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper
.java:325)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:2
95)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:245)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
ilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperV
alve.java:214)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextV
alve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j
ava:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j
ava:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal
ve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav
a:148)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:306)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:385)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:745)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.ja
va:675)
at org.apache.jk.common.SocketConnection.runIt(ChannelSocket.java:868)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadP
ool.java:684)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.InvalidClassException: net.sf.jasperreports.engine.base.JRBas
eReport; local class incompatible: stream classdesc serialVersionUID = 604, loca
l class serialVersionUID = 606
at java.io.ObjectStreamClass.initNonProxy(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readNonProxyDesc(Unknown Source)
at java.io.ObjectInputStream.readClassDesc(Unknown Source)
at java.io.ObjectInputStream.readOrdinaryObject(Unknown Source)
at java.io.ObjectInputStream.readObject0(Unknown Source)
at java.io.ObjectInputStream.readObject(Unknown Source)
at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:86
... 33 more
Anyone pls help. It's bit urgent. Thanks.

I was using iReport v0.5.0 and it uses jasperreports-0.6.7.jar (v0.6.7) of
JasperReports. I compiled and i deployed my application in BEA weblogic server. I got the error listed below. Only after i saw your
response explaining that iReport was the issue, i checked the iReport lib directory and found this version of jasperreport jar.
iReport creates a java source file which is used to a jasper file.
iReport will link in the v0.6.7 version of jasperReports. When you
deploy your web application it will recognize this version through the compiled jasper file and give you the InvalidClassException, even
though you only have one jasperReport jar deployed with your war file.
The way i fixed this problem was to create my web application with the
jasperreport jar comes with iReport.
Thanks for mentioning iReport.
Christopher
Error:
Caused by: java.io.InvalidClassException: net.sf.jasperreports.engine.base.JRBas
eReport; local class incompatible: stream classdesc serialVersionUID = 607, local class serialVersionUID = 10002
at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:463)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1521)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1435)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1521)
...

Error loading schemas from wsdl

Hello,
Can someone please tell me the meaning of the error ->
"Error loading schemas from wsdl"
In our production environment , I see this error for one of the domains , whenever we restart services during the weekend .
The exact error log is :
<2007-09-22 05:11:26,749> <INFO> <Receipts.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::initiateInboundJcaEndpoint - Creating and initializing inbound JCA endpoint for:
process='bpel://localhost/Receipts/ReceiptController~1.2/'
domain='Receipts'
WSDL location='receiptReaderService.wsdl'
portType='Read_ptt'
operation='Read'
activation properties={BAERCVDET=/export/bpel/data/prod/outgoing, BAERCVDETARCH=/export/bpel/data/prod/archive, portType=Read_ptt}
<2007-09-22 05:11:26,750> <INFO> <Receipts.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - endpointActivation for portType=Read_ptt, operation=Read
<2007-09-22 05:11:26,910> <ERROR> <Receipts.collaxa.cube.activation> <AdapterFramework::Inbound> Error while performing endpoint Activation: ORABPEL-09701
Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "file:/oracle/product/10gas/busintel/integration/orabpel/domains/Receipts/tmp/.bpel_ReceiptController_1.2.jar/receiptReaderService.wsdl". The reason is Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "file:/oracle/product/10gas/busintel/integration/orabpel/domains/Receipts/tmp/.bpel_ReceiptController_1.2.jar/receiptReaderService.wsdl". The reason is Connection refused.
Please verify the schemas defined in wsdl.
Please verify the schemas defined in wsdl.
<2007-09-22 05:11:26,914> <ERROR> <Receipts.collaxa.cube.activation> <AdapterFramework::Inbound>
ORABPEL-09701
Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "file:/oracle/product/10gas/busintel/integration/orabpel/domains/Receipts/tmp/.bpel_ReceiptController_1.2.jar/receiptReaderService.wsdl". The reason is Error loading schemas from wsdl.
Error while loading schemas from wsdl file at location "file:/oracle/product/10gas/busintel/integration/orabpel/domains/Receipts/tmp/.bpel_ReceiptController_1.2.jar/receiptReaderService.wsdl". The reason is Connection refused.
Please verify the schemas defined in wsdl.
Please verify the schemas defined in wsdl.
 at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadAllSchemas(WSDLSchemaManager.java:314)
 at com.collaxa.cube.ws.wsdl.WSDLManager.getWSDLSchemaManager(WSDLManager.java:368)
 at oracle.tip.adapter.fw.jca.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:406)
 at oracle.tip.adapter.fw.agent.jca.JCAActivationAgent.activateInboundJcaEndpoint(JCAActivationAgent.java:869)
 at oracle.tip.adapter.fw.agent.jca.JCAActivationAgent.initiateInboundJcaEndpoint(JCAActivationAgent.java:856)
 at oracle.tip.adapter.fw.agent.jca.JCAActivationAgent.init(JCAActivationAgent.java:399)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.collaxa.cube.engine.core.BaseCubeProcess.notifyActivationAgents(BaseCubeProcess.java:558)
 at com.collaxa.cube.engine.core.BaseCubeProcess.enableActivationAgents(BaseCubeProcess.java:490)
 at com.collaxa.cube.engine.deployment.CubeProcessHolder.setDefaultRevision(CubeProcessHolder.java:1166)
 at com.collaxa.cube.engine.deployment.CubeProcessHolder.setDefaultRevision(CubeProcessHolder.java:1098)
 at com.collaxa.cube.engine.CubeEngine.setDefaultRevision(CubeEngine.java:1047)
 at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.setDefaultRevision(CubeEngineBean.java:530)
 at ICubeEngineLocalBean_StatelessSessionBeanWrapper0.setDefaultRevision(ICubeEngineLocalBean_StatelessSessionBeanWrapper0.java:2345)
 at com.collaxa.cube.engine.dispatch.message.process.SetDefaultMessageHandler.handle(SetDefaultMessageHandler.java:42)
 at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
 at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
 at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
 at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
 at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
 at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
 at java.lang.Thread.run(Thread.java:534)
<2007-09-22 05:11:27,035> <ERROR> <Receipts.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cube engine": Could not initialize activation agent.
An error occured while initializing an activation agent for process "ReceiptController", revision "1.2".
Please ensure that the activation agents are configured correctly in the bpel deployment descriptor (bpel.xml).
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
ORABPEL-09903
How can i further troubleshoot this . later on when I restart again ...it works .
Help appreciated .
Amith

Hello,
Thanks for your response.
U see ..this happens only when the all the services / databases etc come back up after a cold backup during the weekend . And like I u have mentioned , I thought this could be due to the BPEL service trying to connect to one of the databases as mentioned in the oc4j-ra.xml ( there are 3 distinct database connections to 3 diff databases ) . So I made sure that all the dbs are up and running before this particular service is started . It wroks at times ..but then it fails at times . So I have started wondering whether this is a different issue . And I am not able to troubleshoot it any further .
What exactly should I check in the wsdl file ..
Appreciate your help !
Amith

NoClassDefFoundError when loading Applets from IIS5.0

Hi
I am having trouble loading applets from IIS 5.0. Here is my html code
<applet code="Appli/Loader.class" width="100%" height="100%">
</applet>
All my clases and packages reside in the same directory from where this html is loaded.
The trouble is that it behaves erratically. At times the Applet works fine and at times, the browser cannot locate some class.
The funny part is this behaviour is not consistent. Some times the browser is able to load all the classes and the applet function very well.
Any suggestion/advice/tip will be great help
Thanks

Add the codebase parameter and see if it works.
<applet code="Appli/Loader.class" codebase="DIRECTORY_WHERE_YOUR_CODE_RESIDES" width="100%" height="100%">
</applet>

Problem loading Applets from Jar files on 64 bit machine

I am developing an applet (extends Applet but uses swing components) using JDK 1.6 (Though these problems still happen in JDK 1.7) and I am unable to get the applet to load on a 64 bit machine in most cases. The web server(s) are running on localhost and I am connecting on the same machine using a local network ip address (such as 192.168.*.*)
Below are all of my test results. Can someone provide a suggestion for repairing this? The Windows Server machine is a clients computer I access to it via remote desktop but I can't do much with it though I do have administrator rights. The Windows 7 machine is my development platform so I have been able to do extensive testing on it.
This problem is presenting in the following environments when trying to load an applet from JAR files in a HTML document using the Applet or Object tag.
Windows Server 2008 (Intel Chipset)
Tested Browsers:
Internet Explorer 9 (32 bit) - Shows it is blocked by default then simply shows an x when loaded from a web page, same result when loading from local drive.
Windows 7 Home Premium (AMD Chipset)
Tested Browsers:
Firefox 6.0.1 (32 bit) - Java logo shows with spinner, after a few minutes there is finally an error that a class in the jar was not found
Internet Explorer 9 (32 bit) - Java logo shows with spinner, after a few minutes there is finally an error that a class in the jar was not found
Internet Explorer 9 (64 bit) - Java logo shows with spinner and most of the windows desktop manager freezes, keyboard is the only thing that responds so you can alt-tab to another app to regain control of the desktop.
Chrome (32 bit) - Java logo shows with spinner, after a few minutes there is finally an error that a class in the jar was not found
The only way I have been able to get a Java applet to run on a 64 bit machine are the following ways.
Firefox 9 nightly (64 bit) works perfectly! Go Firefox!
Internet Explorer 9 (32 bit) loading directly from drive (c:\...)
Chrome (32 bit) loading directly from drive (c:\...)
Firefox 6.0.1 (32 bit) loading directly from drive (c:\....)
Can someone please help! I've been fighting with this bug for over a week and I can't find anything that will solve it, I have noticed that in some cases if my jar has very little code in it than it will run on the server, but the minute I start adding things to it the jar won't load anymore.

jschell wrote:
rritoch wrote:
I am developing an applet (extends Applet but uses swing components) using JDK 1.6 (Though these problems still happen in JDK 1.7) and I am unable to get the applet to load on a 64 bit machine in most cases.
To clarify...
1. You have tried it on 32 bit machine? Exactly which OS?I tested this on Windows Vista Business which is in 32 bit mode and the applets run without any problems
>
2. Your only 64 bit tests have involved 2008/Win7?
If so then I would suspect something with windows not java. Probably permissions.
The web server(s) are running on localhost and I am connecting on the same machine using a local network ip address (such as 192.168.*.*)
Yes, I haven't tried running the jars on other operating systems.
>
I don't understand that. If you are running on localhost then you should connect to localhost. If running on an IP then you should connect to that. Perhaps you meant that you have tested using both of those?I'm testing using the lan ip address but I'm connecting from the same machine. I've tried localhost and that didn't work so I tried lan ip since that will likely have a different java security context than localhost. At first I was blaming the IIS server but I downloaded the jar directly and using HTTP fox was able to verify that the jar is being sent with the correct mime-type and that the server can upload the jar file without a problem. This leaves me to believe the problem is with Java.

Problem loading applet from tomcat

I am facing a problem loading the batik applet from tomcat. I have placed all the jar files of batik in ROOT directory in tomcat. Along with the folder containing the batik applet. Still i receive the following exception when trying to load the html page containing batik applet.
Applet tag in html page is:
<applet codebase = "." code="batik_applet.BatikApplet.class" name="myApplet" width="1600" height="1200" hspace="0" vspace="0" align="middle" archive="batik-swing.jar,batik-gvt.jar,batik-bridge.jar,xml-apis-ext.jar,batik-css.jar,batik-util.jar,batik-dom.jar,batik-svg-dom.jar,batik-anim.jar,batik-awt-util.jar,batik-codec.jar,batik-ext.jar,batik-extension.jar,batik-gui-util.jar,batik-parser.jar,batik-script.jar,batik-svggen.jar,batik-transcoder.jar,batik-xml.jar,js.jar,pdf-transcoder.jar,xalan-2.6.0.jar,xerces_2_5_0.jar,xml-apis.jar">
</applet>
I already have a folder named batik_applet containing BatikApplet.class in the ROOT directory.
========Exception===========
network: Connecting http://localhost:8080/servlet/batik_applet/BatikApplet.class with proxy=DIRECT
network: Connecting http://localhost:8080/servlet/batik_applet/BatikApplet.class with cookie "JSESSIONID=1A75299B77372108560B4DF8DC65A3A6"
network: Connecting http://localhost:8080/servlet/batik_applet/BatikApplet/class.class with proxy=DIRECT
network: Connecting http://localhost:8080/servlet/batik_applet/BatikApplet/class.class with cookie "JSESSIONID=1A75299B77372108560B4DF8DC65A3A6"
load: class batik_applet.BatikApplet.class not found.
java.lang.ClassNotFoundException: batik_applet.BatikApplet.class
 at sun.applet.AppletClassLoader.findClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadCode(Unknown Source)
 at sun.applet.AppletPanel.createApplet(Unknown Source)
 at sun.plugin.AppletViewer.createApplet(Unknown Source)
 at sun.applet.AppletPanel.runLoader(Unknown Source)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
 at sun.applet.AppletClassLoader.getBytes(Unknown Source)
 at sun.applet.AppletClassLoader.access$100(Unknown Source)
 at sun.applet.AppletClassLoader$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 ... 10 more
basic: Exception: java.lang.ClassNotFoundException: batik_applet.BatikApplet.class
Any help would be appreciated.

Assuming that your applet is not in a jar file (don't see a value for archive)
you have a file callsed ProcessStatus.class in a folder WEB-INF\classes relative to
the location of the jsp file.
So if the jsp file is in
myJSPFileFolder
the class should be in:
myJSPFileFolder\WEB-INF\classes
If you want to see when the jre is trying to load and where it it trying to load it from you
can inspect a full trace, to turn the full trace on (windows) you can start the java console, to be found here:
C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
In the advanced tab you can fill in something for runtime parameters fill in this:
-Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
if you cannot start the java console check here:
C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
I think for linux this is somewhere in youruserdir/java (hidden directory)
add or change the following line:
javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
for 1.5:
deployment.javapi.jre.1.5.0.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
The trace is here:
C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
I think for linux this is somewhere in youruserdir/java (hidden directory)
The trace should show something like :
Caused by: java.io.FileNotFoundException: http://server/location/filename.class (The system cannot find the path specified)

Error loading item from WAD

Hello,
I have problems with loading template from WAD to Browser.
I created the template and then pushed the button Execute in the browser. I can see only message: Error Loading item*
Can you help me pleas.
Thanks
Petr

Hello,
I created the template with one table, saved and executed in browser and I have again problem with loading item.
My problem has longer history, because I worked on BWT system normally(I created many templates and I had no problems with loading items) a one day I started to work and I saw this error message. Now I can´t execute any templates (inclusive of all that worked correctly before)
It´s possible that I made some change in WAD settings but I don´t know where....
Thanks
Petr

Problem in loading applet from non executable jar file

hello ,
I am new to jar concept plz help.. I am trying to call an applet from another applet through frame it is working fine but its download time is much more. now i want to store all my images , sound files and class files of other applets in a jar file and want to access these inner applets from this jar file so that it will make only one http connection with the server for this jar file only and can reduce the download time of applet.
Can anyone can give me suggestion plz..
Thanx

You have to download what you have to download. You
probably can't easily share images between 2 separate
Jar files. Unless you can expose them through the
other applet via a method that can be known once you
have the reference to the other applet.Thanx but i think i have to elaborate the problem :
my project structure is just like this ::
on the top is ::
Applet A---> from this applet i am callling Applet B & Applet C in frame
and communication is established between these 3 applets successfully .
now i have made a single non executable jar file which contains images , sound and class files of these applets .
so i am referencing images and sound files in applets through this jar.
but i wanted to load Applet B & C through this jar file only.
How can i do this ??
Thanx .. I hope now the problem is clear

Error Loading data from oracle to flat file in oracle data integrator

Hi All,
I m trying to load data from oracle database to flat file.But I am getting the error at step "Insert new row"(integration)
Error Message is:
7000 : null : com.sunopsis.jdbc.driver.file.b.i
com.sunopsis.jdbc.driver.file.b.i
     at com.sunopsis.jdbc.driver.file.b.d.setDate(d.java)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
I m nt able to find out the exact reason.Can anyone help me in that.

yes...I got the mistake which i was doing.Actually the target file data type should be string and I was defined it diffrent for each column.
When I chnged the data type to string,data get loaded to target table.
Thanks for your reply.

ClassNotFound error when loading applet from a NTLM authenticated site

Hi,
I wrote a Java applet and put it into a JAR file and signed the JAR file. It works fine if the user doesn't need to be authenticated. However, when I place the same JAR to a site that uses NTLM (NT challenging) authentication. The applet failed to load and returns ClassNotFound exception. Does anyone know why?
The following is the complete error message:
java.io.IOException: Server returned HTTP response code: 401 for URL: http://unibox.MySite.com/fileupload/FileUpload.jar
 at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:697)
 at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:369)
 at sun.net.www.protocol.http.HttpURLConnection.getHeaderFields(HttpURLConnection.java:1139)
 at sun.plugin.net.protocol.http.HttpURLConnection.checkCookieHeader(HttpURLConnection.java:330)
 at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:367)
 at sun.plugin.net.protocol.http.HttpUtils.followRedirects(HttpUtils.java:39)
 at sun.plugin.cache.CachedJarLoader.download(CachedJarLoader.java:311)
 at sun.plugin.cache.CachedJarLoader.load(CachedJarLoader.java:131)
 at sun.plugin.cache.JarCache.get(JarCache.java:177)
 at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(CachedJarURLConnection.java:71)
 at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(CachedJarURLConnection.java:56)
 at sun.misc.URLClassPath$JarLoader.getJarFile(URLClassPath.java:498)
 at sun.misc.URLClassPath$JarLoader.<init>(URLClassPath.java:459)
 at sun.misc.URLClassPath$2.run(URLClassPath.java:255)
 at java.security.AccessController.doPrivileged(Native Method)
 at sun.misc.URLClassPath.getLoader(URLClassPath.java:244)
 at sun.misc.URLClassPath.getLoader(URLClassPath.java:221)
 at sun.misc.URLClassPath.getResource(URLClassPath.java:134)
 at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.net.URLClassLoader.findClass(URLClassLoader.java:186)
 at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:132)
 at sun.plugin.security.PluginClassLoader.findClass(PluginClassLoader.java:189)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
 at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:112)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
 at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:473)
 at sun.applet.AppletPanel.createApplet(AppletPanel.java:548)
 at sun.plugin.AppletViewer.createApplet(AppletViewer.java:1621)
 at sun.applet.AppletPanel.runLoader(AppletPanel.java:477)
 at sun.applet.AppletPanel.run(AppletPanel.java:290)
 at java.lang.Thread.run(Thread.java:536)
load: class FileUpload.class not found.
java.lang.ClassNotFoundException: FileUpload.class
 at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:151)
 at sun.plugin.security.PluginClassLoader.findClass(PluginClassLoader.java:189)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
 at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:112)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
 at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:478)
 at sun.applet.AppletPanel.createApplet(AppletPanel.java:548)
 at sun.plugin.AppletViewer.createApplet(AppletViewer.java:1621)
 at sun.applet.AppletPanel.runLoader(AppletPanel.java:477)
 at sun.applet.AppletPanel.run(AppletPanel.java:290)
 at java.lang.Thread.run(Thread.java:536)
Caused by: java.io.IOException: open HTTP connection failed.
 at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:224)
 at sun.applet.AppletClassLoader.access$100(AppletClassLoader.java:40)
 at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:141)
 at java.security.AccessController.doPrivileged(Native Method)
 at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:138)
 ... 10 more

It appears that the latest jvm plugins use java to get the archive files instead of using the browser to download the archive files.
In addition sun does not support NTLM authentication, because of this the latest jvms are unable to download the jar file containing the applet.
I have been working on finding a way to replace suns http Handler, but have had no luck with setting the java.protocol.handler.pkgs for the plugin and having it retain the setting.
I have achieved partial results using the appletviewer with -J-Djava.protocol.handler=com.nogoop
you might try taking a look at http://www.nogoop.com

Error loading data from BW to BPC with standard package

Hi experts,
A big part of our solution is pulling actuals from BW into BPC. To do so we use the standard SAP package "Load InfoProvider Selections" which calls the process chain /CPMB/LOAD_INFOPROV_UI.
We have migrated our environment to BPC 10 and tried to run this process and are now getting the following error:
“ Task name CONVERT:
No 1 Round:
An exception with the type CX_ST_MATCH_ELEMENT occurred, but
was neither handled locally, nor declared in a RAISING clause
System expected element 'Selections' ”
We have tested and this is happening with all data loading packages. It appears as though it is expecting a "selection" parameter, but selections have definitely been made. Has anyone encountered a similar issue or have any idea how to resolve it?
Best,
Chris

Hi Vadim,
Yep, my script is:
(INFOPROVIDERSELECTION,%InforProvide%,"%SELECTION%",Please input the infoprovider and set selection,,)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(RADIOBUTTON,%CLEARDATA%,"Select the method for importing the data from the source file to the destination database",0,{"Merge data values (Imports all records, leaving all remaining records in the destination intact)","Replace && clear datavalues (Clears the data values for any existing records that mirror each entity/category/time combination defined in the source, then imports the source records)"},{"0","1"})
(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after importing",1,{"Yes","No"},{"1","0"})
(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%ACTNO%,%INCREASENO%)
(/CPMB/INFOPROVIDER_CONVERT,OUTPUTNO,%TEMPNO1%)
(/CPMB/INFOPROVIDER_CONVERT,ACT_FILE_NO,%ACTNO%)
(/CPMB/INFOPROVIDER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/INFOPROVIDER_CONVERT,SUSER,%USER%)
(/CPMB/INFOPROVIDER_CONVERT,SAPPSET,%APPSET%)
(/CPMB/INFOPROVIDER_CONVERT,SAPP,%APP%)
(/CPMB/INFOPROVIDER_CONVERT,FILE,%InforProvide%)
(/CPMB/INFOPROVIDER_CONVERT,CLEARDATA,%CLEARDATA%)
(/CPMB/INFOPROVIDER_CONVERT,INFOPROV_SELECTION,%SELECTION%)
(/CPMB/CLEAR_DATA,INPUTNO,%TEMPNO1%)
(/CPMB/CLEAR_DATA,CHECKLCK,%CHECKLCK%)
(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
(/CPMB/APPEND_LOAD,CLEARDATA,%CLEARDATA%)
Thanks,
Chris

Error loading data from an XML file using HTTPService

Hello All,
I have a runtime error that has got me beat at the moment I am building an App in Flash Builder 4 to run on AIR.
The error is as follows: TypeError: Error #1009: Cannot access a property or method of a null object reference.
What i'm Trying to Do:
I have 2 DropDownList controls, the first is populated with country names and the other with language options. All the 1st DropDownList control does
is set an image control to display the country flag and enable the 2nd DropDownList.
The 2nd DropDownList sets the langCode variable equal to the chosen language code. I then call the language function and pass it langCode. Using this variable, I build up the string
so that langFilePath will be equal to the XML file (which is "Lang_GBR.xml") location on my desktop and then call the HTTPService.
As soon as the language function is called, the runtime error occurs and highlights the line with btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;
where I try to assign the button label with a new value from the XML file.
I suspect this may be a trivial error but I just can't see it at the moment.
Any help or guidance would be appreciated. Thanks
Code:
<fx:Script>
 <![CDATA[
 [Bindable]
 public var langFilePath:String;
 public var langDir:File = File.desktopDirectory;
 public var langCode:String;
 public function countrySelect_changeHandler(event:IndexChangeEvent):void
 switch (countrySelect.selectedItem)
 case ('United Kingdom'):
 trace("Item Selected was: "+ countrySelect.selectedItem);
 img_countryFlag.source = AngolaFlag;
 break;
 case ('France'):
 trace("Item Selected was: "+ countrySelect.selectedItem);
 img_countryFlag.source = AustraliaFlag;
 break;
 default:
 break;
 langSelect.enabled = true;
 trace("1st dropdownbox");
 public function langSelect_changeHandler(event:IndexChangeEvent):void
 switch (langSelect.selectedItem)
 case ('English'):
 trace("Language Selected was: "+ langSelect.selectedItem);
 langCode = "Lang_GBR";
 break;
 case ('French'):
 trace("Language Selected was: "+ langSelect.selectedItem);
 langCode = "Lang_FRA";
 break;
 language(langCode);
 public function language(aParam:String):void
 trace("Code Was: " + aParam);
 trace("Lang dir: " + langDir.nativePath);
 langFilePath = langDir.nativePath + "/" + aParam + ".xml";
 trace("File to load: " + langFilePath);
 trace("loadLangFile.url: " + loadLangService.url);
 loadLangService.send();
 btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;
 ]]>
</fx:Script>
<fx:Declarations>
 <s:HTTPService id="loadLangService" url="{langFilePath}"/>
</fx:Declarations>
<s:DropDownList x="10" y="201" id="countrySelect" prompt="Please Select Your Country" width="274" enabled="true" change="countrySelect_changeHandler(event)">
<s:DropDownList x="10" y="348" id="langSelect" prompt="Please Select Your Language" width="274" enabled="false" change="langSelect_changeHandler(event)">

Don't sure about your XML structure, but for now i see the problem here between this 2 lines of code:
loadLangService.send();
btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;
Think data that your httpService should receive just can't go so fast to populate the lastResult before you call it in the next line
Try adding a result listener to your service before you send it:
loadLangService.addEventListener(ResultEvent.RESULT, handler);
loadLangService.send();
function handler(event:ResultEvent):void {
 btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;

Error Loading data from SAP R/3 to BW

Dear sdn,
 When I create a infopackage and load transaction or master data from R3. Sometimes the produre is correct but most of the time errors occurs.
The monitor detail trip info:
Extraction (messages): Missing messages
 Missing message: Request received
 Missing message: Number of sent records
 Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
 Request IDoc : IDoc ready to be transferred to application
Processing (data packet): No data
The monitor status trip info:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
The monitor status trip info: (step by step analysis):
green light Data request sent off ?
gray light RFC to source system successful ?
gray light Does selectable data exist in the source system?
red light Data selection successfully started ?
red light Data selection successfully finished ?
green light Processing error in source system reported?
gray light RFC to Warehouse successful ?
green light Processing error in Warehouse reported ?
gray light Processing successfully finished?
gray light All reported data packets received?
gray light All data packets complete ?
green light Have all Processing Steps been Carried out ?
green light All Data Packets Updated in all Targets?
green light Inadmissable Aggregation?

hi
i looks like Idoc not processed
-->go to BD87,and slect the WUPBON and click Process tab.
--> then the IDOCs will get process to
-->go to LBWQ to see the entries, once the IDOC process you should get the entries in the LBWQ.
-->now go to LBWE and got to job control of your data source.
-->click the Start date and say immidiate, then select the Print parameters and give the output device as Locl.
--> now hit shedule job, then job will release.
--> go to SM37 and see weather the job is finished.
now come to BW said
--> go to the pirticular process chain and run the process chain.
this should work. good luck
sampath..

Firefox getting error loading sound from server

I'm using the following code to load some 30 sec soundbytes
from a server. Safari works without error most of the time. When it
fails it gives me a "webKiterrorDomain" message.
Firefox just won't load anything ever.
None of the 10 soundbytes refuse to load all the time with
Safari. And the order in which I click on them doesn't seem to
matter. Any at random will probably will load but 20% chance it
might not.

This is what I tried at the very first. It didn't work well
so I tried the totalBytes / getBytes thing which seemed to work
better. Then, because it didn't always work, I thought that perhaps
there were times when the total bytes didn't exactly equal what was
downloaded (can this be true?). So I gave it a range of error of 10
bytes by using the Math.abs() difference between the two. This
worked okay but still not always. Currently, the first click, after
clearing the cache in Firefox, usually doesn't play the sound.
Clicking the same mc again usually does play the sound. Sometimes
if I click sound "A" (doesn't work) then I click sound "B" (doesn't
work), then I click "A" again it works. Sometimes clicking "A"
twice (works) then click "B" once (works). Other sounds might work
on the first try but often the first click on an mc after a cache
empty will fail.
When I used the
IF (success) {
my_sound.start();
earlier I found that this sometimes never got to be true. I
found this complaint elsewhere on the Internet.
Is this a Flash bug or browser bug? Safari is inconsistent as
well but yields a "webKitErrorDomain203", though perhaps for a
totally unrelated reason.. don't know.
Anyway.. any work around would be appreciated.
If you want to check it for yourself go to:
http://www.laurasiersema.com
then navigate to "music"
thanks, chop

Error loading applet in Mozilla 1.4

hi,
I am trying to load an applet in mozilla 1.4 browser on solaris 5.8 but it gives following error
Java(TM) Plug-in: Version 1.4.2_06
Using JRE version 1.4.2_06 Java HotSpot(TM) Client VM
User home directory = /home/c159641
java.lang.InternalError: obsolete interface used
at sun.java2d.NullSurfaceData.getRaster(Unknown Source)
at sun.java2d.loops.OpaqueCopyAnyToArgb.Blit(Unknown Source)
at sun.java2d.loops.GraphicsPrimitive.convertFrom(Unknown Source)
at sun.java2d.loops.MaskBlit$General.MaskBlit(Unknown Source)
at sun.java2d.loops.Blit$GeneralMaskBlit.Blit(Unknown Source)
at sun.java2d.pipe.DrawImage.blitSurfaceData(Unknown Source)
at sun.java2d.pipe.DrawImage.renderSurfaceData(Unknown Source)
at sun.java2d.pipe.DrawImage.copyImage(Unknown Source)
at sun.java2d.pipe.DrawImage.copyImage(Unknown Source)
at sun.java2d.pipe.DrawImage.copyImage(Unknown Source)
at sun.java2d.pipe.ValidatePipe.copyImage(Unknown Source)
at sun.java2d.SunGraphics2D.drawImage(Unknown Source)
at sun.java2d.SunGraphics2D.drawImage(Unknown Source)
at sun.plugin.AppletViewer.paintForegrnd(Unknown Source)
at sun.plugin.AppletViewer.paint(Unknown Source)
at sun.awt.RepaintArea.paint(Unknown Source)
at sun.awt.motif.MComponentPeer.handleEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
java.lang.ClassFormatError: ensplan/client/ENSPlanApplet (Bad magic number)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
java.lang.IllegalArgumentException: null source
at java.util.EventObject.<init>(Unknown Source)
at java.awt.AWTEvent.<init>(Unknown Source)
at java.awt.event.ComponentEvent.<init>(Unknown Source)
at java.awt.event.WindowEvent.<init>(Unknown Source)
at java.awt.event.WindowEvent.<init>(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.SequencedEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
java.lang.IllegalArgumentException: null source
at java.util.EventObject.<init>(Unknown Source)
at java.awt.AWTEvent.<init>(Unknown Source)
at java.awt.event.ComponentEvent.<init>(Unknown Source)
at java.awt.event.WindowEvent.<init>(Unknown Source)
at java.awt.event.WindowEvent.<init>(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.SequencedEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Interestingly its getting loaded correctly on different machine.
please provide any pointers to resolve it.
TIA

Did you try a full trace to see why the jre can't connect with the server to get the applet?
To turn the full trace on (windows) you can start the java console, to be found here:
C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
In the advanced tab you can fill in something for runtime parameters fill in this:
-Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
The trace is here:
C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log

Error loading applet from TINI

Similar Messages

Maybe you are looking for