Error logs for Jdeveloper embedded oc4j
Hi guys,
I am currently using the oc4j embedded within jdeveloper (9.0.2) to develop and obviously to debug some code.
When there is an exception in the init() method, there seems to be no record of it in the logs, the only log I found are in jdev/system/oc4j-config/log, specifically the server.log
I have found ArrayOutOfBounds and other unchecked exceptions, but not the Servlet or IO exceptions to be logged there. Anyone have any clues how I can set it to log those as well? or does it not do that?
Thanks lots,
H2O
I think that i they works is lucky, because your two modules get managed through the same class loader in your standalone oc4j
Correct if I'm wrong, but you should not trust using local references if they aren't implemented in the same instance of the classloader, which you can control
Similar Messages
-
Error in loading the WSDL file. Check the error log for more details
Hello,
I am trying to create a Import Adaptive Webservice Model. I am using the WSDL:
http://www.abysal.com/soap/AbysalEmail.wsdl
I am getting the below error when I choose WSDL source as UDDI or file (I am not using any logical destination)
"Error in loading the WSDL file. Check the error log for more details."
Where can i see the error log? And what is the solution to fix this?
I am able to create the model if i save the wsdl locally on my machine and choose Local File System or File as the WSDL source. But at runtime this fails as the application tries to read the WSDL for metadata info and it looks into the application server for this file.
I also tried creating the old webservice model. And it is able to create the model. But I feel I need to use the new model as this one is deprecated.
Thanks,
SachinHi
For the logs you can search in this directory
Goto Window->Show view->Other->PDE Runtim->Error Log
please try this may it would help you out, try to create a model for you Web Service using Web Service Model (DEPRECATED)
See this link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/integration%2bof%2bweb%2bservices%2b-%2bdifferent%2bscenarios -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>i created a SSRS report with shared datasets and uploaded rdl files and rsd files , while trying to map rdl file with data sets i am getting an error
when i click on manage for .rdl file, its throwing error , as
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)
Object reference not set to an instance of an object.
please help me with this -
Error logging for Integrated Planning
Can I turn on error logging for Integrated Planning. Users get errors and forget to screenshot it to me, so I have no way of finding out what their error was unless I get them to duplicate it. It would be nice to look up a log of errors by user. Do they have something like that in Integrated Planning?
Thanks!Hi Dustin,
Few comments :
1. UPDATE TASK means that a new background task is create and the function is performed asyncronisly ,with that the user will not wait for the update of the DB to finish ,you can read in SAP help about CALL FUNCTION IN UPDATE
2. Be aware that the table that you create will be extremely large in no time ,you will have to delete data on a regular basis
3. The same concept of the thread can be applied to function module 'RRMS_MESSAGE_HANDLING' this function module is responsible of messaging in BEX 'some times IP related messages are invoked from it.
Regards,
Eitan. -
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this
<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile. -
MGW error logs for Cpu utlization
Dear All
We are using Cisco AS5400 as mgw, we often found during call peak hrs thsi mgw's showing error logs for cpu utlization. I have following questions in regards to thsi error.
1. why this error logs comes?
2. where & what we need to chcek? any hardware or IOS issue?
3. main and important thing whether during such error logs there is load on MGW and due to over cpu utlization call which attempt on MGW may failed? if yesy its failed with MGW end or failed from source end as abondan? or else if MGW disconnect then what is ISDN casue code.
we are using PGW in signalling or nailed mode.
Please help me with this
Regards
Amit--Hi
Thanks to both of you
Here is log for Cpu utilization status during peak time as we see this error logs during peak time only
show proc cpu sorted | excl 0.00
CPU utilization for five seconds: 78%/36%; one minute: 73%; five minutes: 70
P
ID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
216 646931668 841788064 768 10.40% 9.81% 9.32% 0 CCH323_CT
211 723978128-1124958350 0 5.48% 5.51% 5.36% 0 VOIP_RTCP
77 437021944-2113488726 0 4.91% 4.60% 4.53% 0 IP Input
63 368724284 712553243 517 3.93% 3.96% 3.69% 0 ISDN
207 226701532 790289944 286 3.52% 2.89% 2.68% 0 VTSP
61 262232 529665 495 2.03% 2.16% 1.04% 0 AFW_application_
206 319808168-1186847347 0 2.62% 2.27% 2.16% 0 DSMP
233 37460 57790 648 1.63% 1.10% 0.02% 0 AFW_application_
3 293876 595003 493 1.63% 2.38% 2.06% 0 AFW_application_
205 70108356 455758882 153 1.06% 0.72% 0.74% 0 Resource Monitor
245 129219428 972383769 132 0.90% 0.93% 0.01% 0 ISDN L2 Process
208 43246508 321780241 134 0.57% 0.38% 0.37% 0 TSP
4 35595820 258014603 137 0.57% 0.32% 0.32% 0 EDDRI_MAIN
37 162961592 35154923 4635 0.40% 0.53% 0.56% 0 Per-Second Jobs
200 33113344 140290609 236 0.32% 0.56% 0.53% 0 CC-API_VCM
198 35068732 7031070 4987 0.16% 0.13% 0.13% 0 Compute load avg
175 15677516 144379255 108 0.16% 0.08% 0.08% 0 AAA SEND STOP EV
33 16841100 32895103 511 0.16% 0.07% 0.06% 0 Net Background
92 6052176 398473472 15 0.08% 0.04% 0.02% 0 RUDP Main Proces
On this MGW we have full E1 means 16 E1s & total calls we observed during this is around 458 to 482 active callslls.
our MGW IOS is 12.4(22) & we are not using Radius AAA.
Mpneers,
Can you tell me i can see few logs like callid rejected. means at that time that call rejected within MGW. so such failed call failed as what Abondon or what is ISDN cause code?
Please help me with this
Amit-- -
Error logging for data rules in owb11gr2
Hi all,
I was playing around with error logging for data rules and I realized that when an error gets logged into the error table for failing a particualar data rule for a table, some of the columns in the error table such as ORA_ERR_NUMBER$, ORA_ERR_MESG$, ORR_ERR_OPTYP$ were not filled in. Why is this so? Is there anyway to populate these fields as well when a row gets populated in? This is because the optype field may be useful to identify the operation type of the erronous row.
ALso, does anyone know whether the error table for dimensions work correctly? I replicate the portion of the mapping flow that goes to my dimension and even though the errornous row gets logged into the error table, the ERR$$$_OPERATOR_NAME for that row did not show the dimension object but instead show another of my table operator in the mapping. Pretty bewildered as to why this is the case.The cube operator in 11gR2 also supports DML error logging (as well as orphan management handling). This is enabled by setting the property 'DML Error table name' (in group Error table) on the Cube operator inside the mapping. The error table specified will be created when the mapping is deployed (if you specify an existing one the error is trapped).
The DML error handling will catch physical errors on the load of the fact.
Cheers
David -
ADF_FACES-60097:For more information, please see the server's error log for
HI
when we login in to the Em and then try to navigate to the core applications server under the business intelligence Domain it gives the bellow Error message
Stream closed
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #5
and when we check the server error log then we got the below log
>
####<Jun 2, 2013 10:08:05 AM GST> <Error> <oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator> <obitst.oasiserp.com> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <d02e32166b4c953b:7cceca3a:13ef5c15d45:-8000-000000000000065f> <1370153285886> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #2
java.io.IOException: Stream closed
at java.io.BufferedInputStream.getInIfOpen(BufferedInputStream.java:134)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read(BufferedInputStream.java:237)
at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:416)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:315)
at oracle.jsp.parse.XMLUtil.getDocument(XMLUtil.java:447)
at oracle.jsp.parse.OracleJsp2Java.transformImpl(OracleJsp2Java.java:402)
at oracle.jsp.parse.OracleJsp2Java.transform(OracleJsp2Java.java:593)
at oracle.jsp.runtimev2.JspPageCompiler.attemptCompilePage(JspPageCompiler.java:691)
at oracle.jsp.runtimev2.JspPageCompiler.compileBothModes(JspPageCompiler.java:490)
at oracle.jsp.runtimev2.JspPageCompiler.parseAndGetTreeNode(JspPageCompiler.java:457)
at oracle.jsp.runtimev2.JspPageInfo.compileAndLoad(JspPageInfo.java:624)
at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:645)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:385)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:810)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:734)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.JSPFilter.doFilter(JSPFilter.java:93)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:469)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)
at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
at oracle.sysman.emSDK.adfext.ctlr.EMViewHandlerImpl.renderView(EMViewHandlerImpl.java:157)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:911)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:367)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>Hi Timo,
I check it :
Caused by: java.lang.NullPointerException
at cic.portal.Currencys.createCurrency(Currencys.java:24)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
... 56 more
When i click: at cic.portal.Currencys.createCurrency(Currencys.java:24) ---> it's call to method beans:
public void createCurrency(PopupFetchEvent popupFetchEvent) {
if (popupFetchEvent.getLaunchSourceClientId().contains("create")) {
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("CreateInsert");
operationBinding.execute();
this method is Popup: popupFetchListener="#{currencys.createCurrency}">
I thing lines :
OperationBinding operationBinding = bindings.getOperationBinding("CreateInsert");
operationBinding.execute();
it not working, i have no idea for this.. -
JDeveloper embedded OC4J accessing remote database
How do I configure the embedded OC4J JNDI w/JDBC to use a local TNSNames.ora file setting to connect to a remote 9i database?
You might want to consult the OC4J admin guide.
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28950/adminclient.htm#CHDCFBIH
For the embedded OC4J you can access datasource settings through tools->Embedded OC4J preferences. -
MapViewer JDeveloper embedded OC4J installation error
Hi,
I downloaded all latest mapviewer.ear and latest OC4J.
Followed MapviewerUG installation instructions
After starting OC4J
using the url http://localhost:8888/mapviewer/
works well and the demos like jview also works well
using the url http://localhost:8888/mapviewer/omserver
however, generates the following error
<?xml version="1.0" encoding="UTF-8" ?>
<oms_error>Message:[oms] empty or null xml map request string. Sat Apr 02 14:40:14 IST 2005 Severity: 0 Description: at oracle.lbs.mapserver.oms.getXMLDocument(oms.java:852) at oracle.lbs.mapserver.oms.doPost(oms.java:302) at oracle.lbs.mapserver.oms.doGet(oms.java:234) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534)</oms_error>
I also downloaded the latest JDeveloper 10G and JDeveloper extensions and follwed the instructions in the How To Document
How To Build Dynamic Maps Using JDeveloper 10g and Oracle Application Server MapViewer
An Oracle JDeveloper How To Document
Justin Lokitz
October 2004
I have no compilation errors but I am not able to view the density map. I am getting the Internal Server Error 500 instead.
Can anyone please guide me through this.
Thomas JosephHi Joao
Thanks for tip on the log file.
I have the data loaded.
Evrything works fine when I use Mapviewer with OC4J and try the jview demo.
I am however not able to get the example 'How to build Dynamic Maps' running using JDeveloper using the embeded OC4J server.
The jsp source is as follows
<%@ taglib uri="http://xmlns.oracle.com/j2ee/jsp/tld/spatial/mvtaglib.tld" prefix="mapviewer"%>
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>untitled</title>
</head>
<body>
<DIV align="center">
<P>MapViewer WebMap</P>
<P>
<mapviewer:init url="http://localhost:8888/mapviewer/omserver" datasource="mvdemo" id="mvHandle"/>
</P>
</DIV>
<DIV align="center">
<mapviewer:setParam antialiasing="true" basemap="density_map" centerX="-122.4" centerY="37.8" height="450" size="10" title="MyWebMap" width="600"/>
<mapviewer:run/>
</DIV>
<img src="<mapviewer:getMapURL />"/>
</body>
</html>
There are no comilation errors
When I run the code I get 500 Internal Server Error.
The Application2-oc4j-app.log generated is as follows
05/04/05 20:04:11 Started
05/04/05 20:05:14 Application2-ViewController-webapp: JDevOJSP: init
05/04/05 20:05:14 Application2-ViewController-webapp: action: init
05/04/05 20:05:16 Application2-ViewController-webapp: 9.0.4.0.0 Started
05/04/05 20:05:28 Application2-ViewController-webapp: Servlet error
javax.servlet.jsp.JspException: Connection refused: connect
at oracle.lbs.mapclient.taglib.MapViewerRunTag.doStartTag(MapViewerRunTag.java:123)
at webmap.jspService(webmap.jsp:17)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:349)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Please put me on the track. I am not able to figure out what is going wrong.
Regards
Thomas Joseph -
Error message running application from Jdeveloper/embedded OC4J
Does anyone know what configuration I am missing to be able to run a web application from JDeveloper with the embedded OC4J.
Here are the error messages that I am getting:
PM oracle.j2ee.jndi.JndiMessages warningInvalidResourceReference
WARNING: Resource reference jdbc/testdev not found. Allowing J2EEContext creation to continue anyway.
Nov 22, 2006 1:46:46 PM oracle.j2ee.jndi.JndiMessages warningNoTypeFoundAtLocation
WARNING: No javax.sql.DataSource found at null
I should be able to run the application from Jdeveloper development environment without deploying to Tomcat after each change.
There must be a jndi configuration that I need the questions is where?
Is this configuration or lack of configuration documented some where by Oracle?
ThanksHi, user544716,
did you solved the problem? I got exactly the same problem. In my case, my application runs well with jdeveloper 10.1.2 but when migrated to jdeveloper 10.1.3.1, the emdedded OC4J won't wrok and generated the same error as yours.
Thanks. -
Problem with Jdeveloper Embedded OC4J XML parsing
Hi all,
I am having a problem getting jdeveloper to work well. If I use jdeveloper to build the WAR file for my app and I deploy to Tomcat, the app runs fine with no error.
However, if I try to run my app within the jdeveloper, I get this error -
08/06/10 19:11:10 com.ibatis.dao.client.DaoException: Error while configuring DaoManager. Cause: java.lang.RuntimeException: XML Parser Error. Cause: oracle.xml.parser.v2.XMLDOMException: invalid character [ in name
Caused by: java.lang.RuntimeException: XML Parser Error. Cause: oracle.xml.parser.v2.XMLDOMException: invalid character [ in name
08/06/10 19:11:10 at com.ibatis.dao.engine.builder.xml.XmlDaoManagerBuilder.buildDaoManager(XmlDaoManagerBuilder.java:112)
08/06/10 19:11:10 at com.ibatis.dao.client.DaoManagerBuilder.buildDaoManager(DaoManagerBuilder.java:47)
I have tried to turn off XML parsing within Jdeveloper but no luck. I don't understand why jdeveloper will be trying to implicitly parse the XML doc, and wont even do it well.
Is there a way I can turn off Embedded OC4J XML parsing ? and let it just use the parser in the application ? I mean Tomcat works fine with this application.
Please help !I think maybe you use wrong adf lib when deploying your project to the OC4J.
You can update your oc4j in the jdev.[JDEV->Tools->ADF Runtime Installer-> Standalone OC4J].
Good luck
Hart -
Errors Deploying BMP to embedded OC4J
I'm using JDeveloper 9.0.3.2. When trying to run a BMP Entity Bean in the embedded OC4J and the deployment process starts I am getting an error:
CustomerLocalHome_EntityHomeWrapper5.java:1201: unreported exception java.rmi.RemoteException; must be caught or declared to be thrown
collection.add(getWrapperByPK(transaction, key));
^
CustomerLocalHome_EntityHomeWrapper5.java:1316: unreported exception java.rmi.RemoteException; must be caught or declared to be thrown
collection.add(getWrapperByPK(transaction, key));
^
CustomerLocalHome_EntityHomeWrapper5.java:1431: unreported exception java.rmi.RemoteException; must be caught or declared to be thrown
collection.add(getWrapperByPK(transaction, key));
^
CustomerLocalHome_EntityHomeWrapper5.java:1546: unreported exception java.rmi.RemoteException; must be caught or declared to be thrown
collection.add(getWrapperByPK(transaction, key));
^
CustomerLocalHome_EntityHomeWrapper5.java:1661: unreported exception java.rmi.RemoteException; must be caught or declared to be thrown
collection.add(getWrapperByPK(transaction, key));
^
5 errors
Error compiling H:\jdev\Freeport\Customer\classes: Syntax error in source
Oracle9iAS (9.0.3.0.0) Containers for J2EE initialized
This code has been verified using the EJB Verifier and compiles cleanly.
The java file mentioned in the error doesn't exist in my project nor can I find CustomerLocalHome_EntityHomeWrapper5.java anywhere on my machine.
I cannot find any reason for this problem and any insight to a solution would be helpful and appreciated.Hi,
I'm having exactly the same problem. I don't know why I get this error, but I figured out how to run application.
My ebj's have finder methods returning collections, usually in LocalHome interface you declare that a methods throw FinderException. Try declaring also RemoteException, this is simple solution that make my beans work with OC4J. Unfortunately when I check ejb with verifier I get errors.
Maybe someone knows what causes this problem and how to avoid it.
Martin. -
Error in Releasing Contracts in SRM-Error Log for user WF-BATCH
Hi,
When we are releasing contracts in SRM, an error log is being generated for a user WF-BATCH with message :
"Recipient not found
The error ocurred by processing event RELEASED_NEWLY with GUID 4530EA86C23B007700000000B0000023 and object_id= 4400000238"(Where 4400000238 is our contract no)
Also our contract is not being transported to CCM even though all the relevant configurations have been done in XI.
Is this because of the error log?? What is the issue??
Any Useful answers would be suitably rewarded..
Regards,
PuneetHello Puneet,
Please check whether u have released that contract or not.
if u need to release purchase order from the contract, it needs to be released first.
from ur problme statement, it seems u haven't released that contract.
Sarabjeet
Maybe you are looking for
-
How to set default value and after that , use it as control
Hello, Currently i am making motor driver from labview, and i am facing one problem. When i connect to my board via labview, it will relay last position to global variable. After that, i have to go to loop, where i can send back modified position to
-
How to delete shared photos on iPad after installing Apple TV
-
Help! Loving the budget template, but I would like to be able to create an entire years worth of a buget with out creating a whole new transaction/budget page for each month. How do I get the new transaction to identify a new budget chart? Thanks, Em
-
Hi Here, we have problem on deferred tax while going through tcode S_ac0_52000644. In a plant, so far they were not transfered from interim account to final account. Problem is line items are not picked. But, there are so many line items in a GL. P
-
Position of cursor in ALV using oops
Hi all, i am using OOPS ALV (CL_GUI_ALV_GRID) to display data. i have some editable fields in ALV. While i enter value in some field and press 'ENTER' my cursor goes to the FIRST field of the alv. i want it to keep cursor in same field. please tell m