Error made while clearing the MBR

Hey guys,
I have macbook and while trying to do a triple boot (SL, Windows7, Arch) system, I messed up the MBR and had to reset it.. I am new to the Mac so, didnt realize that ; /dev/sda reffered to the HD and /dev/hda reffered to the cd/dvd drive, needless to say I did,
dd if=/dev/zero of=/dev/hda bs=446 count=1
and wham now when I load about the arch live cd and try to load setup I get
Error opening terminal: Linux.
I cleared the MBR with the correct command
dd if=/dev/zero of=/dev/sda bs=446 count=1
but no dice, I still get the same error. any ideas on how to get around this?
thanks

Doshu wrote:Error opening terminal: Linux.
I've only come across this error before when the terminfo entry is missing or corrupted. Could you check the md5sum of the disk? I doubt this is related to the erroneous command, which I believe to be completely harmless (incapable of writing to the media).
Out of interest, what was the need to zero the MBR before performing the install?

Similar Messages

Error while clearing the open items - Error Message GLT2152

Dear Forum,
While clearing the open items in the Customer Account with the Bank receipt we get the error message -
Account Determination 01001/missing Message No. GLT2152 The following error occured for the document you entered -
The online document splitting is active in the system.
The account determination does not exist yet and document cannot be posted.
Procedure - Either check the splitting rule or create the account determination key.
Would need your help as to how to resolve this and what to check.
Thanks!
Regards

HI Murli,
Thanks for the prompt response, I have checked in OB09, this refers to the Account Determination for OI Exchange Rate Differences and the entries maintained appear to be ok. What else could be the issue?
Regards

Backup Fail with Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider, Event ID 12293, error returned while creating the volume shadow copy 0x8004230f,

We are using TINA backup solution and windows 2003 backup is failling with VSS error.
For testing purpose we initiate a system state backup (or any file backup) with the help of windows 2003 ntbackup.exe and found it is failing with below error.
Backup error report.
Backup Status
Operation: Backup
Active backup destination: File
Media name: "Backup.bkf created 28/05/2014 at 06:34"
Volume shadow copy creation: Attempt 1.
Error returned while creating the volume shadow copy:0x8004230f.
Error returned while creating the volume shadow copy:8004230f
Aborting Backup.
The operation did not successfully complete.
We check event viewer and found below error event.
Event Type:
Error
Event Source:
VSS
Event Category:
None
Event ID:
12293
Date:
28/05/2014
Time:
05:48:10
User:
N/A
Computer:
CQ329TOS
Description:
Volume Shadow Copy Service error: Error calling a routine on the Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details Cannot ask provider {b5946137-7b9f-4925-af80-51abd60b20d5} if
volume is supported. [0x8000ffff] [hr = 0x8000ffff].

Resolution:
After getting this error we check Shadow Copy provider and writer health and fond it is fine.
To get shadow copy providers details use below command.
Command: vssadmin list providers
Command output
C:\>vssadmin list providers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
   Provider type: System
   Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Version: 1.0.0.7
To get shadow copy writers health
Command: vssadmin list writers
Command Output.
C:\>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001 Microsoft Corp.
Writer name: 'System Writer'
   Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
   Writer Instance Id: {333e02cd-d9ec-43c8-9b45-39691ad1b351}
   State: [1] Stable
   Last error: No error
Writer name: 'Registry Writer'
   Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
   Writer Instance Id: {800877a5-e13d-47a3-8f99-ebd4d3b3fd12}
   State: [1] Stable
   Last error: No error
Writer name: 'MSDEWriter'
   Writer Id: {f8544ac1-0611-4fa5-b04b-f7ee00b03277}
   Writer Instance Id: {63400aa0-a17f-4121-9483-1cd226f03238}
   State: [1] Stable
   Last error: No error
Writer name: 'COM+ REGDB Writer'
   Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
   Writer Instance Id: {e13cb72b-84fa-4c86-86d8-48f523aafc9a}
   State: [1] Stable
   Last error: No error
Writer name: 'Event Log Writer'
   Writer Id: {eee8c692-67ed-4250-8d86-390603070d00}
   Writer Instance Id: {ce63b3a0-e038-4e56-9d07-929f256639de}
   State: [1] Stable
   Last error: No error
Writer name: 'WMI Writer'
   Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   Writer Instance Id: {008e8714-ed6d-4288-81ce-4b0b1ec41294}
   State: [1] Stable
   Last error: No error
Writer name: 'BITS Writer'
   Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
   Writer Instance Id: {e22a8953-a52c-4a76-bec0-8773122cbff8}
   State: [1] Stable
   Last error: No error
Next I check Shadow Copies details from volume properties (right click on C or other drive then select properties then click on Shadow Copies Tab) and found it is showing the same error code..
From this error it is clear that the issue is inside the registry hive and due to junk hive shadow copies services not able to working properly.
For me the server have two disk we check disk signature at MBR and found the disk signature was.
Signature disk 0 : 9351912b
Signature disk 0 : FDFBE035
But at registry we found lot of nonexistance signature. Which indicate lot of junk valu inside registry.
Now how can we resolve this issue?
It is very simple just delete the registry key “volume” (registry key “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\STORAGE\Volume”) and reboot the server it will “Volume” registry hive automatically.
Note:
When you remove registry key it is showing error unable to delete, then please right click on it select permission then take ownership and assign full permission to your login account.
Please be careful when you delete registry key because system can fully crashed if you delete or modify wrong registry key.
Your can take a backup of the registry key by exporting.

Document Splitting Error (GLT0002) while clearing Vendor line items by using F-44

Dear Guru's,
My client is getting below error while clearing the vendor using T code F-44, I checked related links but i could not find the suitable solution for this issue.
Doc No: 35112789 has the problem.. i checked Document splitting related Config but it is fine and
i can see the values in table FAGL_SPLINFO_VAL and not in FAGL_SPLINFO. Please help me to resolve the below issue

Hi,
You are getting this error as the document was posted before Document Splitting Activation or was posted when Document Splitting Active was deactivated.
For the Documents posted before Document Splitting, Migration Cockpit is to be used.
If there are few documents, then U can take a down time (ensure no document is posted in this time, if posted then you will get same error for the posted documents), remove the tick, clear the documents and Activate Document Splitting.
Regards,
Debashri Dutta

System Error 998 While loading the Labview Run-Time Engine

Hello.
I have a DLL made with LV 7.1 I run the dll using a C compiler and works great in WINXP, but cannot run in Win2K. Error is:
"System error 998 while loading the Labview Run-Time Engin(c:\program
files\National Instruments\Shared\Labview Run-Time\7.1\\lvrt.dll)
READVOLTAGE requires a version 7.1 (or compatible) Labview Runtime
Engine. Please contact the vendor of READVOLTAGE to correct this
problem"
READVOLTAGE is my function inside the dll. The runtime is already
installed. I tried it in another WINXP running machine and works fine.

This is actually a Microsoft bug with statically loaded DLLs. There are a couple of workarounds for it, and I have included two links below to posts that address this issue:
Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC
I get error 998 when calling a LabVIEW buildt DLL from MSVC++
Kind Regards,
E. Sulzer
Applications Engineer
National Instruments

SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote

Error: You cannot login because an error occurred while retrieving the login URL. (WW

Situation is this.. was using 8.1.6 EE and Oracle Portal.. was able to get the Oracle Portal page up and after a while the application died.. this happened numerous times. Found in one of these forums that a bug existed (UTL_HTTP) and recommended going to 8.1.7 EE because of a patch. I migrated my 8.1.6 EE to 8.1.7 EE(made sure procedures & packages were valid). I'm able to bring up the Oracle Portal page but when I go to login I get this:
Error: You cannot login because an error occurred while retrieving the login URL. (WWC-41441)
Thoughts?

Hi,
I ran ssodatan again and got the following error:
ERROR: Setting Login Server Partner App
ORA-06508: PL/SQL: could not find program unit being called
I then found out that the wwsec_sso_enabler_private in the SSO
schema is invalid and this was causing the above error. I tried
recompiling the package but got the following error:
Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
LINE/COL ERROR
151/6 PL/SQL: SQL Statement ignored
151/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
151/20 PLS-00336: non-object-table "SECI" illegal in this
context
160/4 PL/SQL: SQL Statement ignored
643/6 PL/SQL: SQL Statement ignored
643/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
643/20 PLS-00336: non-object-table "SECI" illegal in this
context
LINE/COL ERROR
651/4 PL/SQL: SQL Statement ignored
713/4 PL/SQL: SQL Statement ignored
713/50 PLS-00382: expression is of wrong type
745/3 PL/SQL: SQL Statement ignored
746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
allowed in this context
The same package in the Portal schema is valid. Will an
export of this package from a working instance and an import into
the above instance solve this problem?
Thanks and Regards,
Rupesh

Error occured while converting the file track #1 the required disk can't be found

I have old CDs, I have new CDs and I have a relatively new MacBook Pro (3 years old) running current software on 10.9.4 OSX Mavericks. My updates are good on my iTunes but it won't let me import ANY CDs that I OWN! Is this the new Apple and it's iTunes update?
Can we not legally put our CDs onto our phones or iPad/iPods any longer? Must I go garage sale-ing for a personal CD player? The code reads; "Error occured while converting the file track #1 the required disk can't be found". My cd drive is fine btw. It reads and shows on my desktop and will also play when I double click the CD icon and play the .aiff file.

I kind of have the suspicion if you were no longer allowed to put CDs on iPods it would be front page news, not something you alone would discover. Anyway, there would probably be a clear message to that effect rather than a technical error message. I would take the technical problem route first rather than suspect you have been targeted for persecution.
Have you restarted iTunes? Have you tried restarting your computer?
Personally I prefer third party rippers such as XLD and Max and you could certainly try one of those to at least isolate the issue to iTunes.

An error occurred while burning the disc.

I tried to burn some stuff onto a DVD today with my PowerBook. Here's the info on the burner:
MATSHITA DVD-R UJ-845E:
Manufacturer: MATSHITA
Model: MATSHITA DVD-R UJ-845E
Revision: DMP2
Serial Number:
Drive Type: CD-RW/DVD-RW
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
I bought some DVD's on sale at Radio Shack, and when I tried to burn a movie and a few photos onto a disc, the progress bar showed it starting to burn, then it stopped and I got this message:
"An error occurred while burning the disc. This disc cannot be used."
A little research here at the Apple forum brought me to this site:
http://www.digitalfaq.com/media/dvdmedia.htm
And after downloading a little program called DVD Media Inspector, I was able to classify the DVD's I had bought as:
"4TH CLASS MEDIA:
Pathetic garbage media, landfill material, about 0-50% success rate...."
OK, off to Mega Lo Mart, where I bought some nice, expensive Maxell DVD's.
Media Inspector doesn't see my fancy new DVD's. When I try to burn stuff using the Finder, I get the same result as before.
Getting desperate at that point, I located and downloaded updated firmware for my model of Matshita superdrive. I'm not sure what firmware is, and there was a free range one and a standard one, so I went for the standard one. There were dire warnings in the readme file about "flashing" a superdrive being on the same risk level as open heart surgery. I flashed my superdrive. (You can say that here, and it's not dirty.)
I also tried burning using iDVD, and after much preparation, it started to burn, then spit out the DVD. I tried three of the landfill DVD's and two of the Maxell ones. I'm out of things to try. Any ideas?
I have never tried burning DVD's before. Am I doing something wrong?

I tried again using iDVD's One-Step DVD making feature. It will let you make a one step from a movie file, and I had a .dv version of the movie I want to burn.
It encoded video for a while, encoded audio for a little while, then started to burn. The superdrive made some noises, then the DVD was ejected and I got an error message saying:
"Burning Finished
Errors were found during the burning process"
I hit OK (though it really wasn't OK) and got another error message box. This one said:
"Multiplexer error
(some message about multiplexing problem)"
The message didn't make sense to me, and I was unable to remember it. What's a multiplexer? I would have guessed an avid movie-goer, but somehow I think that is not it.

Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)

Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.

Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John.

ERROR: An error occurred while building the default domain

Hi,
I have just installed Oracle JDeveloper 11g R1 (Build 5407) (Oracle JDeveloper Studio Edition for Windows (934 MB) ) on my windows laptop, but when I start JDeveloper I get the message : ERROR: An error occurred while building the default domain.
Does anyone know what this means or how to resolve it?
Log file:
Process started
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3.1.0\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files\Java\jre1.6.0_03\lib\ext\QTJava.zip;C:\DevSuiteHome_2\jlib\repository.jar;C:\DevSuiteHome_2\jlib\ldapjclnt10.jar;C:\DevSuiteHome_2\jlib\debugger.jar;C:\DevSuiteHome_2\jlib\ewt3.jar;C:\DevSuiteHome_2\jlib\share.jar;C:\DevSuiteHome_2\jlib\utj.jar;C:\DevSuiteHome_2\jlib\zrclient.jar;C:\DevSuiteHome_2\reports\jlib\rwrun.jar;C:\DevSuiteHome_2\forms\java\frmwebutil.jar;C:\DevSuiteHome_2\forms\java\FormsProperties1.jar;C:\DevSuiteHome_2\forms\java\handleimage3.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\SSLCON~1.JAR
wlst >
wlst > PATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DOCUME~1\RICHAR~1\LOCALS~1\Temp\sfx93.tmp\jre160_05\bin;C:\OraHome_2\jre\1.4.2\bin\client;C:\OraHome_2\jre\1.4.2\bin;C:\DevSuiteHome_2\jdk\jre\bin\classic;C:\DevSuiteHome_2\jdk\jre\bin;C:\DevSuiteHome_2\jdk\jre\bin\client;C:\DevSuiteHome_2\jlib;C:\DevSuiteHome_2\bin;C:\DevSuiteHome_2\jre\1.4.2\bin\client;C:\DevSuiteHome_2\jre\1.4.2\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\DevSuiteHome\jdk\jre\bin\classic;C:\DevSuiteHome\jdk\jre\bin;C:\DevSuiteHome\jlib;C:\DevSuiteHome\bin;C:\DevSuiteHome\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Starbase\StarGate SDK\Lib;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_07\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
wlst >
wlst > Your environment has been set.
wlst >
wlst > CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\utils\config\10.3.1.0\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.1.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files\Java\jre1.6.0_03\lib\ext\QTJava.zip;C:\DevSuiteHome_2\jlib\repository.jar;C:\DevSuiteHome_2\jlib\ldapjclnt10.jar;C:\DevSuiteHome_2\jlib\debugger.jar;C:\DevSuiteHome_2\jlib\ewt3.jar;C:\DevSuiteHome_2\jlib\share.jar;C:\DevSuiteHome_2\jlib\utj.jar;C:\DevSuiteHome_2\jlib\zrclient.jar;C:\DevSuiteHome_2\reports\jlib\rwrun.jar;C:\DevSuiteHome_2\forms\java\frmwebutil.jar;C:\DevSuiteHome_2\forms\java\FormsProperties1.jar;C:\DevSuiteHome_2\forms\java\handleimage3.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jrf_11.1.1/jrf-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.odl_11.1.1/ojdl2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.dconfig-infra_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.fabriccommon_11.1.1/fabric-common.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xmlparserv2.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.xdk_11.1.0/xml.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/orawsdl.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.webservices_11.1.1/mdds.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/org.apache.commons.digester_1.7.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.bind_2.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.activation_1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/../modules/javax.xml.stream_1.1.1.0.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-mbeans.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-manifest.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jps_11.1.1/jps-upgrade.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.http_client_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxframework.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.jmx_11.1.1/jmxspi.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.dconfigbeans_11.1.1.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-base.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share.ca_11.1.1/adf-share-ca.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adflogginghandler.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/adfsharembean.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/commons-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/jsp-el-api.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/modules/oracle.adf.share_11.1.1/oracle-el.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/sslconfigwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/auditwlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/oamap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1/common/wlst/resources/ossoiap_help.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\JDEVEL~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar
wlst >
wlst > Initializing WebLogic Scripting Tool (WLST) ...
wlst >
wlst > Welcome to WebLogic Server Administration Scripting Shell
wlst >
wlst > Type help() for help on available commands
wlst >
wlst > Extend Default Domain
wlst > Reading domain: /C:/Documents and Settings/richard anthony/Application Data/JDeveloper/system11.1.1.1.33.54.07/DefaultDomain/
wlst > Adding domain extension template: /C:/Oracle/Middleware/jdeveloper/common/templates/jdeveloper/adrs_template.jar
wlst > Adding domain extension template: /C:/Oracle/Middleware/jdeveloper/common/templates/applications/jrf_template_11.1.1.jar
wlst > Adding domain extension template: /C:/Oracle/Middleware/jdeveloper/common/templates/jdeveloper/adf.fine.logging_11.1.1.jar
wlst > Updating domain.
wlst > Error: updateDomain() failed. Do dumpStack() to see details.
wlst > Problem invoking WLST - Traceback (innermost last):
wlst > File "C:\Documents and Settings\richard anthony\Application Data\JDeveloper\system11.1.1.1.33.54.07\o.j2ee.adrs\ExtendDefaultDomain.py", line 43, in ?
wlst > File "C:\Documents and Settings\richard anthony\Local Settings\Temp\WLSTOfflineIni5366665589360917524.py", line 89, in updateDomain
wlst > File "<iostream>", line 154, in ?
wlst >
wlst > File "<iostream>", line 103, in updateLoggers
wlst >
wlst > SystemExit: Failed to update logging.xml: java.lang.NoSuchMethodError: oracle.core.ojdl.util.XMLUtil.escapeAttrChars(Ljava/lang/String;Ljava/lang/Appendable;)V
wlst >
wlst >
wlst >
wlst >      at com.bea.plateng.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
wlst >
wlst >      at com.bea.plateng.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1490)
wlst >
wlst >      at com.bea.plateng.domain.script.jython.WLScriptContext.updateDomain(WLScriptContext.java:425)
wlst >
wlst >      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
wlst >
wlst >      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
wlst >
wlst >      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
wlst >
wlst >      at java.lang.reflect.Method.invoke(Method.java:597)
wlst >
wlst >
wlst > com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.ScriptException: Traceback (innermost last):
wlst >
wlst > File "<iostream>", line 154, in ?
wlst >
wlst > File "<iostream>", line 103, in updateLoggers
wlst >
wlst > SystemExit: Failed to update logging.xml: java.lang.NoSuchMethodError: oracle.core.ojdl.util.XMLUtil.escapeAttrChars(Ljava/lang/String;Ljava/lang/Appendable;)V
wlst >
wlst >
wlst >
Elapsed time: 16359 ms

Hi,
This might be caused by a conflict with something already in your CLASSPATH. I would suggest the following:
1. Shut down JDeveloper if it is already running. Delete the default domain directory:
rd /s "C:\Documents and Settings\richard anthony\Application Data\JDeveloper\system11.1.1.1.33.54.07\DefaultDomain"
2. From a command prompt, clear your CLASSPATH:
set CLASSPATH=
3. Start JDeveloper using the same command prompt as step 2:
C:\Oracle\Middleware\jdeveloper\jdev\bin\jdev
If the problem was with the pre-existing CLASSPATH, the default domain should now build successfully.
-Nathan

I am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/rirefox/components/ref helper.JS:510 in English

i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English

ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

I had been listen to itunes radio on my computer and now it comes up with the following message"An error occurred while contacting the radio tuning service. Check your internet connection, or try again later???? I have reset cache and it still isn't worki

I have been listening to iturnes radion on my computer for months. now i get an error.
"an error occurred while contacting the radio tuning service. Check your internet connection, or try again later".
I have reset the cache but nothing seems to help. Any help???
55Annie

Somebody suggested clearing the Store cache. I don't know why that would affect the radio. Seems to have not worked for some, worked for a few or maybe they imagined it. Many other posts about this if you browse the forum.
This is happening to some people some of the time in some places, but then not affecting people in other places, or in the same place at different times. You try to guess what is going on. Hasn't happened to me. Maybe it's my iTunes 7.5, or maybe it's luck of the draw since I never use iTunes radio.
Complain to Apple:
http://www.apple.com/feedback/itunesapp.html
Oh, don't expect Apple to say anything about this -- that's not their style.

" An error occurred while creating the backup directory"

Hi all,
I recently bought an external drive because my mac was just about full.
It's made by Lacie, model # P'9231... (1TB)
I got it working, for moving and accessing files (I moved the iPhoto library-and that works fine)... but...
I told Time Machine to use it as the backup disk, but TM often tells be that the backup failed. I get this message;
"Backup failed. An error occurred while creating the backup directory"
I don't understand this. I did some experiments with Time Machine, and I've been able to restore some things, but I still keep getting this message.
I don't know what is getting backed up and what is not..
Did I do something wrong? Or, more importantly, what is the fix?
Any advice is much appreciated. Thanks in advance,
Jim

I'm having the same problem. I just got the drive Saturday at the local Apple store.
Have you figured it out?

I keep getting the following when I try to connect to Itunes Radio- "An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later." I have an excellent strong connection

For over a week,I get the following message everytime I have tried to connect to ITunes Radio..."An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later." My internet connection is excellent & strong & "LATER " has been over a week. Any help or suggestions?? It would be much appreciated, thanks

Somebody suggested clearing the Store cache. I don't know why that would affect the radio. Seems to have not worked for some, worked for a few or maybe they imagined it. Many other posts about this if you browse the forum.
This is happening to some people some of the time in some places, but then not affecting people in other places, or in the same place at different times. You try to guess what is going on. Hasn't happened to me. Maybe it's my iTunes 7.5, or maybe it's luck of the draw since I never use iTunes radio.
Complain to Apple:
http://www.apple.com/feedback/itunesapp.html
Oh, don't expect Apple to say anything about this -- that's not their style.

Error made while clearing the MBR

Similar Messages

Maybe you are looking for