Error while clearing the open items - Error Message GLT2152

Dear Forum,
While clearing the open items in the Customer Account with the Bank receipt we get the error message -
Account Determination 01001/missing Message No. GLT2152 The following error occured for the document you entered -
The online document splitting is active in the system.
The account determination does not exist yet and document cannot be posted.
Procedure - Either check the splitting rule or create the account determination key.
Would need your help as to how to resolve this and what to check.
Thanks!
Regards

HI Murli,
Thanks for the prompt response, I have checked in OB09, this refers to the Account Determination for OI Exchange Rate Differences and the entries maintained appear to be ok. What else could be the issue?
Regards

Similar Messages

Error while clearing Customer open items

Hi,
When I am trying to clear the Customer open items via F-30 I am getting following error -
+Profit center 9000/SEA001 does not exist for 08.04.2011
    Message no. KM026
Diagnosis
    The desired profit center SEA001 is not in the master data table for the specified date.
Procedure
    Check your entry.
    Note: The profit center is usually derived from the original account assignment object (cost center, order, and so on) or other information (such as the material number).
    If necessary, create the desired profit center for the appropriate time
    frame.+
First of all SEA001 is not a Profit Center. It's a material. Correct PC is attached to this material SEA001 and I also checked the validity period of the PC and it's OK.
Can someone please advice how to nail down this issue?
Thanks,
Sanjay

Found the reason.
Actually there was a substitution to fill the PC from XREF3 for document splitting and SD module was passing the material in XREF3 hence the system was thowing the error.
Gaurav - thanks for your input. Your reply pointed out towards substitution.
Infact thanks everyone for the inputs.
Regards,
Sanjay

Error while compiling the PO Item Category KFF

Kindly help me. I am new and learning Purchasing module and now stuck because of an error while compiling the PO Item Category KFF. This is because a segment is saved in the database incompletely.
Now the segment does not show in the Segments Summary form. But when I enter the same Number, I get the error APP-FND-00924: You chose a sement number that is used by another segment.
When I freeze and compile the structure with different segments, I get the error
APP-FND-00668: The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: FDFRKS could not find the structure definition for the flexfield specified by Application = &APPL, Code = MCAT and Structure number = 201 (APPID=401)
APP-FND-00738: Error detected when attempting to load value set on Context: &CONTEXT for Segment: &SEGMENT in Routine: FDFBKS
APP-FND-01564: ORACLE error 1403 in FDFAVS3
Cause: FDFAVS3 failed due to ORA-01403: no data found.
The SQL statement being executed at the time of the error was: and was executed from the file &ERRFILE.
Regards
Reem

Hi Sandeep
Sorry that I am bothering with basic questions, but I am not able to run any Select queries. It gives error Table or View does not exist. I can see the table from ALL_TABLES view, but I cannot Select.
I have logged in as oracle user. This is not Vision datbase. Can you let me know the default dba user and password or how to get the permission?
Regards
Reem

Automatically clear the open items for a GL account cross company codes

Hi FICO experts,
Can anyone help me on the following issue urgently?
There are journal entries posted to same GL account with different company code. Is there any way to automatically clear the open items sitting in the GL account in company code A to against the open items for the same GL account in company code B.
The example is below:
Journal in company code A
Dr. 840410      $100
Cr. 111300       $100
Journal in company code B
Dr. 111301   $100
Cr. 840410      $100
Now I want to automatically clear account 840410 by using assignment or text in the journal entry.
It will be highly appreciated for any instructions.
Adele

Hello Adele Wang,
You can enter cross-company code transactions in one step in the General Ledger, Accounts Receivable, and Accounts Payable application components. This function would be used, for example, for centralized procurement or payment.
Integration:For centralized payments, each individual company code enters its own invoices separately, while a central company code pays them. When you are clearing open items, the system makes clearing entries between the company codes participating in the clearing procedure. These clearing entries represent the receivables and payables that exist between the company codes in centralized payment.
Prerequisites:You have specified which company codes are to be processed via a single company code. In this specification, you can distinguish between clearing transactions. You can therefore have different combinations of company codes for incoming and outgoing payments.
You have specified the clearing accounts that record the receivables and payables between the individual company codes. The system posts to these accounts automatically when clearing the open items.
You need to make the required settings in the activity Prepare Cross-Company Code Manual Payments in Customizing for Financial Accounting (Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Payments->Manual Outgoing Payments).
Features:For each company code, the system generates a separate clearing document. A joint transaction number marks these documents as belonging together.
Example:For a clearing transaction (incoming payment, outgoing payment), you have agreed in Customizing that if company code 0001 is specified, open items are also selected from other company codes (0002 and 0003).
Hope I had been able to help you. Please assign points.
Rgds
manish
Clearing can then also be carried out if the account to be cleared has not been created in company code 0001. As long as no items have to be posted to this account in company code 0001, it is not necessary to create a master record for the account in company code 0001.
See also:

Document is getting posted but unalble to clear the open items

hi gurus,
i m using the inbound idoc ACC_DOCUMENT03 to post the receipt against invoice. uptill now i can post the receipt but it shows the items are still in the open items. i need to clear the open items for the invoice. how to solve it .

Hi,
In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
Hope this will resolve
Assign points if useful
Thanks
Aravind
Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

How to clear the open items and parked items for customer

Hi Experts,
I need to clear the open items and parked items for customer.
So any one could let me know the transaction code and procedure for clearing the items for customer.
Best regards,
Kesava balaji.

Hello,
Parked items will have NO RELEVANCE, unless you post it.
You CANNOT clear parked items.
You can clear the posted items using F.13 or F-32
Regards,
Ravi

Error 'Update Was Terminated' - While clearing an open item

Hi,
We are facing a problem where we receive an error - "Update Was Terminated" when we try to clear some entries for 3-4 vendors (posted in period 12 of year 2006. it happens only for those 3-4 vendors). We have identified the problem as follows:
1) We ran program SAPF190 and found that there is a defference in the 'debit balance' and Total of line items' for these vendors. I ran program SAPF71 (in Quality server) which rectified some entries. However, some entries still remain incorrect and these entries that still remain incorrect are ones - "which have a posting date of 10 oct 2006, but the posting period picked up by the document header is period 12, instead of period 7". Now, some other documents posted for the same vendor on the same date have picked up the correct posting period i.e. 7. I am really baffled at how this actually happened and howcome the system allowed it??
2) After running program SAPF190, there were some entries that got corrected (these entries were just not captured by the system in the balance field, and did not have the same problem as the entries mentioned above where the wrong posting period was picked by the system). When i tried to clear the line items for the vendors whose entries had been rectified, it still gve the update error. When i checked the number range status, i noticed something very odd:
"The number range status shows a number much higher than what the system is automatically picking for the documents (e.g system picks 230 as the document number when posting, but the number range staus in FBN1 shows current number as 256). Also, once 256 is reached (i posted 26 documents for it) and we post the 257th document, the error remains and the status number now moves up 100 places to 356). At this time if i post another document it picks the number 258 instead of 356...and if i keep posting documents till 356 is reached, im sure when i post the 357th document, the status will jump to 456)
Can someone please help me here!! I dont understand how and why this is happening!!
Thanks!!
Regards,
Angad

>
Ravi Sankar Venna wrote:
> Hello,
>
> Please let me know the ERROR name you are getting and what is the transaction code you are using to clear. (F.13 or F-44)
>
> Try to analyze the dump in ST22.
>
> Regards,
>
> Ravi
Hi,
The error is "Update was terminated" . It sends this message to my inbox!! After searching a bit i found about the two reports - SAPF190 and SAPF071. After running them i found some balance mis-match. I ran the two programs and it rectified those mis-matched entries!! However, even after that, it is giving me the same "update was terminated" error. We are using F-44 for clearing.
This error is coming only for those entries which we had posted using a user-exit. Basiaclly these are entries for late payment which were programmed to be posted directly at the time of invoicing. I just checked the code of the exit, and these entries were (astonishingly) made directly into the BKPF and BSEG tables (infact the posting period was hard-coded to '12', which is why even when my posting date for these documents is 10.10.2006, it still enters posting period '12' in the header instead of '7'.). Therefore, there were balance mis-match when we saw the monthly balance in FK10N and compared it with the line items total for that month. However, on running report SAPF071, it corrected those entries, but the update error problem still persists!!
The exact error:
Update was terminated
System ID....   QAS
Client.......   100
User.....   MOHGYA323233
Transaction..   FB1K
Update key...   4A206A2D00E5001202000000C0A80A35
Generated....   04.06.2009, 11:24:59
Completed....   04.06.2009, 11:24:59
Error info...   F1 805: Clearing: Line item 001

Reversal FB08 Creating New OPEN ITEM instead of clearing the open item.

Dear All,
My user has an issue whenever he does any reversal Tcode - FB08 in one of the general ledger "Cash in Transit" nature "open item" & "Line item" instead of clearing the open it it creates a new open line item.
I have checked in Table BKPF , the reversal number is being updated but this items are still appearing open item in FBL3N and not appearing in F-04 (all reversals) for clearing.
Can any one share what can be the reason its creating new open item and how can i solve the issue for clearing the account.
Thanks & Regards
Pravin

hi
Please check following cases
- whether this is happening in all the reversal cases of Cash in transit
- Whether is user is just using FBRA (Onsly resetting) and not going for reversal
- Chances would be one or two partial clearing may have taken for single document for the offsetting accounts
Thanks
Sandeep

Payment run - should not clear the open item but should post payment doc

Hi Gurus,
Can you please help me , on how to acheive like when payment run F110 post the payment doc it should not close the open item rather keep that open item as open item , but hsould be be paid by payment doc posted through payment run F110.
Have any one of you had similar requirement ..? FICO gurus help me to acheiev this .. any exit /BADI ..or ideas..
Appreciate your help in advance

HI ,
Thanks for your reply , but still I am not clear on that.
reason they want to keep this open to be kept as open item , so that item will be picked up by dunning run ..
Basically the open invoice is being cleared by payment doc which was generated by payment run. If we look at BSEG in the open item record BSEG-AUGBL = will have the clearing doc number , and in addition to that BSEG will have created another record for the clearing doc as well .
May be since open invoice record is being updated with clearing doc (AUGBL ) , I belive its not shown up as open item .
Somehow this item should be kept as open item ... that is the req and also paid item payment reference should be transfered to Bill of exchange as well.
Hope you have clear background of my req...
Tnanks in advance ,

Error while closing the open purchase order for MRP run

HI expets,
We are facing issue while closing the old purchase order(18.12.2007) for MRP run, if we are clicking delivery completed for the particular line item ,system is showing the error NET PRICE MUST BE GREATER THAN ZEROthough we have made GR and IR aganist the line item an value is also showing in the purchase order history tab, but in the condition tab there is no value showing for the particular line item .Kindly suggest the way forward.
regards
Karthick sundaram

one thing for sure, you cannot proceed without maintaining proper conditions in the PO.
Why they are not there or not anymore there is probably caused by customizing or vendor master data changes.

Error while deploying the Composite Application ERROR: (SOAPBC_START_1)

Hi,
I have a EJB web service created and deployed in GlassFish. I have created a BPEL which will recieve from the web service and then insert into a SQL table. To track the messages I have also created to File WSDLs to save the WS message and the DB message.
While deploying the Composite application I am recieving this error. "Component: sun-http-binding
ERROR: (SOAPBC_START_1) HTTPBC-E00205: Start failed. java.lang.Exception: LifecycleException: PWC3985: Protocol handler initialization failed: java.net.BindException: Already bound: 8080
Can anyone tell me what this is error is all about ??
Regards,
Jai

This is the Glassfish Server log
Nov 8, 2008 4:01:16 PM com.sun.enterprise.admin.servermgmt.launch.ASLauncher buildCommand
INFO:
C:/Program Files/Java/jdk1.6.0_06\bin\java
-Dcom.sun.aas.instanceRoot=C:/Program Files/glassfish-v2ur2/domains/domain1
-Dcom.sun.aas.ClassPathPrefix=
-Dcom.sun.aas.ClassPathSuffix=
-Dcom.sun.aas.ServerClassPath=
-Dcom.sun.aas.classloader.appserverChainJars.ee=
-Dcom.sun.aas.classloader.appserverChainJars=admin-cli.jar,admin-cli-ee.jar,j2ee-svc.jar
-Dcom.sun.aas.classloader.excludesList=admin-cli.jar,appserv-upgrade.jar,sun-appserv-ant.jar
-Dcom.sun.aas.classloader.optionalOverrideableChain.ee=
-Dcom.sun.aas.classloader.optionalOverrideableChain=webservices-rt.jar,webservices-tools.jar
-Dcom.sun.aas.classloader.serverClassPath.ee=/lib/hadbjdbc4.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,/lib/dbstate.jar,/lib/hadbm.jar,/lib/hadbmgt.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Dcom.sun.aas.classloader.serverClassPath=C:/Program Files/glassfish-v2ur2/lib/install/applications/jmsra/imqjmsra.jar,C:/Program Files/glassfish-v2ur2/imq/lib/jaxm-api.jar,C:/Program Files/glassfish-v2ur2/imq/lib/fscontext.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqbroker.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqjmx.jar,C:/Program Files/glassfish-v2ur2/lib/ant/lib/ant.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWjdmk/5.1/lib/jdmkrt.jar
-Dcom.sun.aas.classloader.sharedChainJars.ee=appserv-se.jar,appserv-ee.jar,jesmf-plugin.jar,/lib/dbstate.jar,/lib/hadbjdbc4.jar,jgroups-all.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Dcom.sun.aas.classloader.sharedChainJars=javaee.jar,C:/Program Files/Java/jdk1.6.0_06/lib/tools.jar,install/applications/jmsra/imqjmsra.jar,com-sun-commons-launcher.jar,com-sun-commons-logging.jar,C:/Program Files/glassfish-v2ur2/imq/lib/jaxm-api.jar,C:/Program Files/glassfish-v2ur2/imq/lib/fscontext.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqbroker.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqjmx.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqxm.jar,webservices-rt.jar,webservices-tools.jar,mail.jar,appserv-jstl.jar,jmxremote_optional.jar,C:/Program Files/glassfish-v2ur2/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,activation.jar,appserv-rt.jar,appserv-admin.jar,appserv-cmp.jar,C:/Program Files/glassfish-v2ur2/updatecenter/lib/updatecenter.jar,C:/Program Files/glassfish-v2ur2/jbi/lib/jbi.jar,C:/Program Files/glassfish-v2ur2/imq/lib/imqjmx.jar,C:/Program Files/glassfish-v2ur2/lib/ant/lib/ant.jar,dbschema.jar
-Dcom.sun.aas.configName=server-config
-Dcom.sun.aas.configRoot=C:/Program Files/glassfish-v2ur2/config
-Dcom.sun.aas.defaultLogFile=C:/Program Files/glassfish-v2ur2/domains/domain1/logs/server.log
-Dcom.sun.aas.domainName=domain1
-Dcom.sun.aas.installRoot=C:/Program Files/glassfish-v2ur2
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-Dcom.sun.aas.promptForIdentity=true
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.help,javax.portlet
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Dcom.sun.updatecenter.home=C:/Program Files/glassfish-v2ur2/updatecenter
-Ddomain.name=domain1
-Dhttp.nonProxyHosts=localhost|127.0.0.1|jnambiar2
-Dhttp.proxyHost=web-proxy.atl.hp.com
-Dhttp.proxyPort=8088
-Dhttps.proxyHost=web-proxy.atl.hp.com
-Dhttps.proxyPort=8088
-Djava.endorsed.dirs=C:/Program Files/glassfish-v2ur2/lib/endorsed
-Djava.ext.dirs=C:/Program Files/Java/jdk1.6.0_06/lib/ext;C:/Program Files/Java/jdk1.6.0_06/jre/lib/ext;C:/Program Files/glassfish-v2ur2/domains/domain1/lib/ext;C:/Program Files/glassfish-v2ur2/javadb/lib
-Djava.library.path=C:\Program Files\glassfish-v2ur2\lib;C:\Program Files\glassfish-v2ur2\lib;C:\Program Files\glassfish-v2ur2\bin;C:\Program Files\glassfish-v2ur2\lib
-Djava.security.auth.login.config=C:/Program Files/glassfish-v2ur2/domains/domain1/config/login.conf
-Djava.security.policy=C:/Program Files/glassfish-v2ur2/domains/domain1/config/server.policy
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Djavax.net.ssl.keyStore=C:/Program Files/glassfish-v2ur2/domains/domain1/config/keystore.jks
-Djavax.net.ssl.trustStore=C:/Program Files/glassfish-v2ur2/domains/domain1/config/cacerts.jks
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djmx.invoke.getters=true
-Dsun.rmi.dgc.client.gcInterval=3600000
-Dsun.rmi.dgc.server.gcInterval=3600000
-client
-XX:+UnlockDiagnosticVMOptions
-XX:MaxPermSize=192m
-Xmx512m
-XX:NewRatio=2
-XX:+LogVMOutput
-XX:LogFile=C:/Program Files/glassfish-v2ur2/domains/domain1/logs/jvm.log
-cp
C:/Program Files/glassfish-v2ur2/lib/jhall.jar;C:\Program Files\glassfish-v2ur2\lib\appserv-launch.jar
com.sun.enterprise.server.PELaunch
start
Starting Sun Java System Application Server 9.1_02 (build b04-fcs) ...
MBeanServer started: com.sun.enterprise.interceptor.DynamicInterceptor
CORE5098: AS Socket Service Initialization has been completed.
CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.6.0_06] from [Sun Microsystems Inc.]
SEC1002: Security Manager is OFF.
C:/Program Files/glassfish-v2ur2/domains/domain1/config/.__com_sun_appserv_pid
ADM0001:SunoneInterceptor is now enabled
SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.
WEB0114: SSO is disabled in virtual server [server]
WEB0114: SSO is disabled in virtual server [__asadmin]
ADM1079: Initialization of AMX MBeans started
ADM1504: Here is the JMXServiceURL for the Standard JMXConnectorServer: [service:jmx:rmi:///jndi/rmi://jnambiar2.asiapacific.hpqcorp.net:8686/jmxrmi]. This is where the remote administrative clients should connect using the standard JMX connectors
ADM1506: Status of Standard JMX Connector: Active = [true]
JBIFW0010: JBI framework ready to accept requests.
WEB0302: Starting Sun-Java-System/Application-Server.
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 8080
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 8181
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 4848
SMGT0007: Self Management Rules service is enabled
Application server startup complete.
Registered Status Provider MBean for sun-jdbc-binding.
Registered Status Provider MBean for sun-sql-engine.
JBISE6013: JavaEEServiceEngine : Java EE Service Engine started successfully.
JBIFW1146: Engine sun-javaee-engine has been started.
Registered runtime configuration MBean for sun-jdbc-binding.
Registered runtime configuration MBean for sun-sql-engine.
HTTPBC-R00100: sun-http-binding starting
FILBC-LCY0006: Component sun-file-binding started (outbound).
FILBC-LCY0005: Component sun-file-binding started (inbound).
Started outbound.
SQLSE started.
JBIFW1146: Engine sun-sql-engine has been started.
Started outbound receiver.
Receiver started.
Receiver started.
FILBC-LCY0003: Component sun-file-binding started with the following configuration:
specification-version: 1.0
build-number: 080408_1
Threads: 10
JBIFW1146: Binding sun-file-binding has been started.
Started inbound receiver.
JDBC Binding component started.
JBIFW1146: Binding sun-jdbc-binding has been started.
PWC3982: Cannot register MBean for the Protocol
grizzlyHttpProtocol.selectorRegisterProtocol
WEB0712: Starting Sun-Java-System/Application-Server HTTP/1.1 on 9080
XSLTSE-5001:Initialized XSLT service engine successfully!
XSLTSE-5002:Started XSLT service engine successfully!
JBIFW1146: Engine sun-xslt-engine has been started.
HTTPBC-E00153: Failed to read the descriptor file for identity information; descriptor file is 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\components\sun-http-binding\install_root/META-INF/jbi.xml'
java.net.MalformedURLException: unknown protocol: c
at java.net.URL.<init>(URL.java:574)
at java.net.URL.<init>(URL.java:464)
at java.net.URL.<init>(URL.java:413)
at com.sun.org.apache.xerces.internal.impl.XMLEntityManager.setupCurrentEntity(XMLEntityManager.java:650)
at com.sun.org.apache.xerces.internal.impl.XMLVersionDetector.determineDocVersion(XMLVersionDetector.java:186)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:771)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:107)
at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:225)
at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:283)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:180)
at com.sun.jbi.httpsoapbc.HttpSoapBindingLifeCycle.identity(HttpSoapBindingLifeCycle.java:1103)
at com.sun.jbi.httpsoapbc.HttpSoapBindingLifeCycle.logComponentInfo(HttpSoapBindingLifeCycle.java:1075)
at com.sun.jbi.httpsoapbc.HttpSoapBindingLifeCycle.start(HttpSoapBindingLifeCycle.java:476)
at com.sun.jbi.framework.ComponentFramework.startComponent(ComponentFramework.java:1846)
at com.sun.jbi.framework.ComponentFramework.startComponent(ComponentFramework.java:1792)
at com.sun.jbi.framework.ComponentOperation.process(ComponentOperation.java:233)
at com.sun.jbi.framework.Operation.run(Operation.java:104)
at java.lang.Thread.run(Thread.java:619)
HTTPBC-R00101: sun-http-binding started with the following configuration:
specification-version: unknown
build-number: unknown
OutboundThreads (max outbound threads): 10
HttpDefaultPort: 9080
HttpsDefaultPort: 9181
AMConfigDir:
ProxyType: DIRECT
ProxyHost:
ProxyPort: 0
NonProxyHosts: localhost|127.0.0.1
ProxyUserName:
UseJVMProxySettings: false
ApplicationVariables: { }
ApplicationConfigurations: { }
JBIFW1146: Binding sun-http-binding has been started.
EJBSCLookup:: sc.getEjbContainerAvailabilityEnabledFromConfig() ==> false
JTS5014: Recoverable JTS instance, serverId = [3700]
About to load the system app: MEjbApp
POARemoteRefFactory checking if SFSBVersionPolicy need to be added
EJBSCLookup:: sc.getEjbContainerAvailabilityEnabledFromConfig() ==> false
POARemoteRefFactory addSFSBVersionPolicy? false
POARemoteRefFactory checking if SFSBVersionPolicy need to be added
EJBSCLookup:: sc.getEjbContainerAvailabilityEnabledFromConfig() ==> false
POARemoteRefFactory addSFSBVersionPolicy? false
LDR5010: All ejb(s) of [MEjbApp] loaded successfully!
About to load the system app: __ejb_container_timer_app
EJB5109:EJB Timer Service started successfully for datasource [jdbc/__TimerPool]
LDR5010: All ejb(s) of [__ejb_container_timer_app] loaded successfully!
BPJBI-5001:BPEL service engine initialized
BPJBI-5002:Starting BPEL service engine
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
I18N:
BPJBI-5003: BPEL service engine started with following configurations:
Persistence Enabled : false
Monitor Enabled : false
Persistence Database NonXA JNDI ResourceName : jdbc/bpelseNonXA
Persistence Database XA JNDI Resource Name : jdbc/bpelseXA
Engine Expiry Interval (failover setting) : 60 seconds
Debug Enabled : false
Debug Port : 3,343
Thread Count 10
Engine Installed on Application Server Cluster : false
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
BPELSEInOutThread.Started_BPEL_service_engine_in-out_thread
JBIFW1146: Engine sun-bpel-engine has been started.
JBIMA0452: Successfully processed 0 Service Assemblies during startup.
JBIFW0012: JBI framework startup complete.
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ClientProvider.property.signature.key.alias"
javax.management.InstanceNotFoundException: No object matches the specified name "domain.applications.lifecycle-module.JBIFramework.property.com.sun.jbi.home"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ServerProvider.property.encryption.key.alias"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ClientProvider.property.security.config"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ClientProvider.property.encryption.key.alias"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ServerProvider.property.security.config"
javax.management.InstanceNotFoundException: No object matches the specified name "server.applications.lifecycle-module.JBIFramework.property.com.sun.jbi.home"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ClientProvider.property.dynamic.username.password"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ServerProvider.property.signature.key.alias"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ClientProvider.property.dynamic.username.password"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ClientProvider.property.encryption.key.alias"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ClientProvider.property.signature.key.alias"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.ServerProvider.property.encryption.key.alias"
javax.management.InstanceNotFoundException: No object matches the specified name "server.security-service.message-security-config.SOAP.provider-config.XWS_ServerProvider.property.signature.key.alias"
wsgen successful
DPL5306:EJB Web Service Endpoint [HPAdaptorWS] listening at address [http://jnambiar2.asiapacific.hpqcorp.net:8080/HPAdaptorWSDLService/HPAdaptorWS]
deployed with moduleid = HPAdaptorWSEJB
Container com.sun.enterprise.webservice.JAXWSContainer@1fae7b1 doesn't support class com.sun.xml.ws.api.server.Module
LDR5010: All ejb(s) of [HPAdaptorWSEJB] loaded successfully!
The log message is null.
javax.ejb.EJBException
at com.sun.ejb.containers.BaseContainer.processSystemException(BaseContainer.java:3869)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3769)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3571)
at com.sun.ejb.containers.WebServiceInvocationHandler.invoke(WebServiceInvocationHandler.java:200)
at $Proxy62.hpAdaptorWSDLOperation(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.webservice.InvokerImpl.invoke(InvokerImpl.java:81)
at com.sun.enterprise.webservice.EjbInvokerImpl.invoke(EjbInvokerImpl.java:82)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:146)
at com.sun.xml.ws.server.sei.EndpointMethodHandler.invoke(EndpointMethodHandler.java:257)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:93)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:106)
at com.sun.enterprise.webservice.MonitoringPipe.process(MonitoringPipe.java:147)
at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:106)
at com.sun.enterprise.webservice.CommonServerSecurityPipe.processRequest(CommonServerSecurityPipe.java:218)
at com.sun.enterprise.webservice.CommonServerSecurityPipe.process(CommonServerSecurityPipe.java:129)
at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3MessageDispatcher.java:113)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3MessageDispatcher.java:87)
at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpoint(EjbWebServiceServlet.java:226)
at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServiceServlet.java:155)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.java:114)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:87)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Caused by: java.lang.UnsupportedOperationException: Message Recieved Successfully
at hp.adaptor.gateway.HPAdaptorWS.hpAdaptorWSDLOperation(HPAdaptorWS.java:22)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.security.application.EJBSecurityManager.runMethod(EJBSecurityManager.java:1067)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:176)
at com.sun.ejb.containers.BaseContainer.invokeTargetBeanMethod(BaseContainer.java:2895)
at com.sun.ejb.containers.BaseContainer.intercept(BaseContainer.java:3986)
at com.sun.ejb.containers.WebServiceInvocationHandler.invoke(WebServiceInvocationHandler.java:189)
... 63 more
EJB5018: An exception was thrown during an ejb invocation on [HPAdaptorWS]
javax.ejb.EJBException
at com.sun.ejb.containers.BaseContainer.processSystemException(BaseContainer.java:3869)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3769)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3571)
at com.sun.ejb.containers.WebServiceInvocationHandler.invoke(WebServiceInvocationHandler.java:200)
at $Proxy62.hpAdaptorWSDLOperation(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.webservice.InvokerImpl.invoke(InvokerImpl.java:81)
at com.sun.enterprise.webservice.EjbInvokerImpl.invoke(EjbInvokerImpl.java:82)
at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:146)
at com.sun.xml.ws.server.sei.EndpointMethodHandler.invoke(EndpointMethodHandler.java:257)
at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:93)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:106)
at com.sun.enterprise.webservice.MonitoringPipe.process(MonitoringPipe.java:147)
at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:106)
at com.sun.enterprise.webservice.CommonServerSecurityPipe.processRequest(CommonServerSecurityPipe.java:218)
at com.sun.enterprise.webservice.CommonServerSecurityPipe.process(CommonServerSecurityPipe.java:129)
at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3MessageDispatcher.java:113)
at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3MessageDispatcher.java:87)
at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpoint(EjbWebServiceServlet.java:226)
at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServiceServlet.java:155)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.java:114)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:87)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Caused by: java.lang.UnsupportedOperationException: Message Recieved Successfully
at hp.adaptor.gateway.HPAdaptorWS.hpAdaptorWSDLOperation(HPAdaptorWS.java:22)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.enterprise.security.application.EJBSecurityManager.runMethod(EJBSecurityManager.java:1067)
at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:176)
at com.sun.ejb.containers.BaseContainer.invokeTargetBeanMethod(BaseContainer.java:2895)
at com.sun.ejb.containers.BaseContainer.intercept(BaseContainer.java:3986)
at com.sun.ejb.containers.WebServiceInvocationHandler.invoke(WebServiceInvocationHandler.java:189)
... 63 more
Deploying service assembly HPAdapatorInboundCAwithFault to target server.
Cannot find CatalogManager.properties
Retrieving document at 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\service-assemblies\HPAdapatorInboundCAwithFault\HPAdapatorInboundCAwithFault-sun-file-binding\sun-file-binding\HPAdaptorInboundBPEL\DBMessageFile.wsdl'.
Retrieving document at 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\service-assemblies\HPAdapatorInboundCAwithFault\HPAdapatorInboundCAwithFault-sun-file-binding\sun-file-binding\HPAdaptorInboundBPEL\MsgInbound_DB.wsdl'.
Retrieving document at 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\service-assemblies\HPAdapatorInboundCAwithFault\HPAdapatorInboundCAwithFault-sun-file-binding\sun-file-binding\HPAdaptorInboundBPEL\Partners\HPAdaptorWSDLService\HPAdaptorWS.wsdl'.
Retrieving document at 'C:\Program Files\glassfish-v2ur2\domains\domain1\jbi\service-assemblies\HPAdapatorInboundCA

Error while saving the service order "Error determining Local currency"

Hi Gurus,
I am facing a strange proble, while adding components to my service order. The system throws error " Error determining local currency: ER type 'M' date 05.11.2007 from SGD to RMB RC 4 ".
the customer is from singapore and am issuing the material from local plant (every where SGD is maintianed as the currency). We have maintained the exchange rate also between these currencies.
Can anybody throw some light on this issue????
Prase

Closed the thread...

How to clear the open item for non-leading ledger?

Hi, Experts,
I have two valuation area VA001 and VA004 and two accouting principle GAAP and IFRS.
Then I assign VA001 to GAAP (post to leading ledger) and VA004 assgin to IFRS (Post to non-leading ledger "IF").
There are two ledger group ,one is 0L and the other is IF.
When i run TBB1, system generate 2 FI documentes.
Then I run F13E to clear the GL account, because some GL is open item management.
But only ledger 0L is cleared, the other non-leading ledger "IF" is not cleared.
I don't know is there any possiblity that system will clear open item for leading ledger and non-leading ledger together?
TKS a lot.

Hi Louise,
you do posting in TRM, but clearing is done in FI, so I moved the thread.
BR, Tomislav

Error while posting the IDOC. Status message '56'

Hi,
I have a requirement where I will post an IDOC which inturn will split the original IDOC into child IDOCs based on the store value.
I am trying to post the IDOC in WE19. So, the Original IDOC is posted successfully with status '53'. Whereas, the child IDOCS finished with error. The status of the message is '56' and the error says 'EDI: Partner profile not available'. Could someone tell me what could be the reason for this..?
Actually, the IDOC was created by the Functional Consultant. So, should the partner profile creation also done by them or do we need to do anything to solve this problem.? Could someone answer me this question. Thanks in advance.
Best Regards,
Paddu.

It looks like the control data for the child segment is not getting populated. you have to find the code which populated the control data and see if it is doing what it should.

Error while sending the mail( Database error for ADDR_PERS_COMP_COMM_GE)

Hello guys,
I am facing the error    " Database error for <ADDR_PERS_COMP_COMM_GET> <0> " as a pop-up message.
below is my program.
types: BEGIN OF t_p0002,
        pernr type PERSNO,       "Personnel number
        nachn TYPE PAD_NACHN,    "Last Name
        VORNA TYPE PAD_VORNA,    "First Name
        gbdat TYPE gbdat,        "Date of Birth
      END OF t_p0002.
*******************Data of an object which can be changed**************************************
data   S_maildata type SODOCCHGI1.
*******************Text field length 255: texts***********************************************
data : IT_MAILTXT1 type table of SOLISTI1 , "Internal table will contain texts of mail header
       WA_MAILTXT1 TYPE SOLISTI1,
       IT_MAILTXT2 type table of SOLISTI1 , "Internal table will contain texts of contents in the mail
       WA_MAILTXT2 TYPE SOLISTI1.
*******************Structure of the API Recipient List*****************************************
data : IT_MAILREC type table of SOMLRECI1,
       WA_MAILREC TYPE SOMLRECI1.
DATA : it_pa0002 TYPE TABLE OF t_p0002,
       wa_pa0002 type t_p0002.
data Header_text type c LENGTH 15.
CONSTANTS content_text type c LENGTH 35 VALUE 'Tomorrow is the birthday of'.
*******************Event start of selection***************************************************
start-of-selection.
PERFORM get_birthdate.   " will give birthday details
PERFORM document_details. " will give text and mail details
*&      Form get_birthdate
      text : subroutine to get employee birthdate details
form get_birthdate.
data : l_date like sy-datum.
refresh it_pa0002.
l_date = sy-datum + 1.
SELECT pernr nachn vorna gbdat
    from pa0002
    INTO TABLE it_pa0002
    where gbdat = '19650302'.
ENDFORM.                    "get_birthdate
*&      Form document_details
      text : subroutine to get texts and mail details.
FORM document_details.
CLEAR: Header_text,
          wa_MAILREC.
REFRESH IT_MAILREC.
S_maildata-obj_name = 'Birthday Reminder'.
s_maildata-obj_descr = 'Birthday Reminder'.
s_maildata-obj_langu = sy-langu.
READ TABLE IT_MAILTXT1 INTO WA_MAILTXT1
WITH KEY WA_MAILTXT1-line .
WA_MAILTXT1-line = 'Birthday Reminder'.
append WA_MAILTXT1 TO IT_MAILTXT1.
CLEAR WA_MAILTXT1.
LOOP at it_pa0002 INTO wa_pa0002.
    READ TABLE IT_MAILTXT2 INTO WA_MAILTXT2
     WITH KEY WA_MAILTXT2-line .
    CONCATENATE content_text ' ( ' wa_pa0002-pernr ' ) ' wa_pa0002-nachn wa_pa0002-vorna
    INTO WA_MAILTXT2 SEPARATED BY ' '.
    append WA_MAILTXT2 TO IT_MAILTXT2.
    CLEAR WA_MAILTXT2.
    CLEAR wa_pa0002.
ENDLOOP.
   LOOP AT IT_MAILREC INTO WA_MAILREC.
WA_MAILREC-RECEIVER = 'Any mail id'.
WA_MAILREC-rec_type = 'U'.
append WA_MAILREC TO IT_MAILREC.
   ENDLOOP.
********************Function Mofule:To Send new Document*****************************************
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
document_data = S_maildata
DOCUMENT_TYPE = 'RAW'
PUT_IN_OUTBOX = ' '
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
tables
OBJECT_HEADER = IT_MAILTXT1
OBJECT_CONTENT = IT_MAILTXT2
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
receivers = IT_MAILREC
   EXCEPTIONS
   TOO_MANY_RECEIVERS = 1
   DOCUMENT_NOT_SENT = 2
   DOCUMENT_TYPE_NOT_EXIST = 3
   OPERATION_NO_AUTHORIZATION = 4
   PARAMETER_ERROR = 5
   X_ERROR = 6
   ENQUEUE_ERROR = 7
   OTHERS = 8
IF sy-subrc = 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "document_details
After I pressed the exit button the program is getting terminated but still this mail is comming to sost transaction code.
If I will comment the message code which is after sy-subrc the popup will not come and program will work without any interruption.
Can anybody please solve this problem?

Resolved

Error while clearing the open items - Error Message GLT2152

Similar Messages

Maybe you are looking for