Error :Maintain pricing conditions for the material for the excise invoice

Hi
i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code  and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
Message no. 8I629" can some body can help me.
with regards
Narendra kumar

Hi,
goto tcode fv11 u have to maintained the condition.
first enter the condition type like jmop -
then enter, next screen u have the select the below comination.
select the plant/vendor/material base u have to maintain the conditions.
Thank's
MVS

Similar Messages

  • Maintain pricing conditions for the material for the excise invoice date

    When I am doing MIGO (Release GR Blocked Stock-movement type) t)he system is giving an error "Maintain pricing conditions for the material for the excise invoice date"I am attaching screen shot for reference.
    I request if any one can provide me the solution

    Hi,
    Check did you have entry of that movement type in the following path where you specify which movement type relating to goods receipts involve excise invoices
    SPRO -
    > Logistics general -> tax on Goods Movements-> India -> Business Transactions--> Specify Which Movement Types Involve Excise Invoices
    Regards,
    Biju K

  • Materialldgr HardCurrency error for same material for the sameperiod

    Hi
    In Materilal ledger , if we check the valuation of the same material for the same period in USD (Hard Currency), there is not any receipt
    Problem description
    The valuation of the material XYZ123 in the MEC of May 2009 resulted in an increase from a cost of 28.21 MXN to a cost of 646.46 MXN
    The main reason for this increase was the reception from lower levels of a cost of 1,721,192.24 MXN
    Afterwards on June, we have a similar amount for 1,632,170.67 MXN
    But if we check the valuation of the same material for the same period in USD, there is not any receipt
    So there is not an increase in hard currency price.  Could you please explain to us where are these amounts coming from and why do they appear only in local currency and not in hard currency?
    What could be the reason in Material Ledger.
    Thanks & Regards
    Malakondareddy

    Hello friend,
                      i feel that u want to send the material to the supplier of that equipment for sum work,
    then it would b better that u maintain the supplier model no. or manufacturing part no. which u can give in the detail.
    it would be better to give the manufacturer part no. The manufacturer can more easil track the part by giving the manufacturer part no, rather then giving your own SAP No.
    and regarding the SUB-Equipment and its part no. there is no standard functionality.
    Regards,
    yk
    Edited by: 1234_abcd on Apr 1, 2010 5:27 PM

  • PR Item Text Different for same Material in the same Plant.

    I have a Query for SAP MM.
    Below is the Scenario:
    User raises a PR through SAP for a particular Material (Spare) which belongs to an Equipment.
    Let's say in Plant A, we have an Equipment 10001 & it has a sub-Equipment as 1000112 & further it has a spare which belongs to the sub-equipment as 1000001.
    Now when the user raises a PR for 1000001 then he wants to automatically populate the information in the Item Detail Text tab  such as:
    Equipment No.: 10001
    Sub-Equipment No.: 1000112
    The above text enables the vendor to track & source the correct material.
    The problem here is that the same material is being used in the same plant for another equipment also, hence we cant just update the PO text in the Material Master record.
    How to map the above in the std SAP system???
    Require your help / expert comments.
    Regards,
    Yogesh.

    Hello friend,
                      i feel that u want to send the material to the supplier of that equipment for sum work,
    then it would b better that u maintain the supplier model no. or manufacturing part no. which u can give in the detail.
    it would be better to give the manufacturer part no. The manufacturer can more easil track the part by giving the manufacturer part no, rather then giving your own SAP No.
    and regarding the SUB-Equipment and its part no. there is no standard functionality.
    Regards,
    yk
    Edited by: 1234_abcd on Apr 1, 2010 5:27 PM

  • Extend the material for the storage location in mass.

    Hi,
    Can any genius let me know how can I extend the material for the storage location in mass.
    Currently our support team doing it by trx MMSC, but now we required to extend the materials for storage location in mass for which MMSC is to lengthily
    Is there any other way apart LSMW for MMSC.
    Regards,
    Shyamal.

    hi
    did u tried mass
    try this
    go to MASS
    then select BUS1001
    go to plant data for material  execute
    click on data records to be creatd
    then add material in field
    then select  select field button and add storage for extrenal procurement then there u will find on filed for external proc
    now do mass change
    reward if helpful
    regards
    kunal

  • Retail: Maintain pricing conditions at general article level in PO

    Hi,
    I create a seasonal purchase order. In this purchase order I enter a general article with several variants. Is there a possibility to maintain pricing conditions at the header item level which will be copied to the variants.
    NB: these surcharges and discounts, so they are not in the info record.
    Kind regards,
    Rudy

    Your issue can be solved with header condition.
    Header Conditions are referring to entire document. You may not able to use automatic price determination for header condition.
    A header condition can be a percentage or a fixed amount. If you define a header condition as a percentage markup or markdown, the defined percentage applies automatically for all document items. If the header condition is a fixed amount
    and if this condition is not additionally flagged as a group condition, the condition amount of the header condition is assigned for each item.
    Header conditions are created manually at header level in a purchasing document.

  • When am creating the material using the transaction MM01 getting the error

    Hi all,
      Could you please help me to solve this issue, When I am creating the material using the transaction MM01, am receiving the error message "Express document "Update was terminated" received from author "XXXXXXXX", I checked the in SM13 found error message showing in Z_LGPLA_BIN_POSTING.
    Regards,
    Muralikrsihna.

    ST22 Error is : SAPSQL_ARRAY_INSERT_DUPREC, below is full error message
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "Z_LGPLA_BIN_POSTING" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
    Regards,
    Muralikrishna

  • Revenue for a material for a period

    How can we find the revenue for a material for a particular period? Is there a standard report that shows the billing data for material with the list of customers
    Edited by: SATHISH KUMAR ARUGA KEERTHI on Sep 25, 2009 9:08 AM

    Dear Customer,
    you can check the following tables:
    VBREVK: Control lines
    Each sales document item (type A, B) has 2 control lines (per G/L account)
    Each invoice item (type D) has 1 control line (per G/L account)
    Her it hows total accrual value, account balance, revenue amount,  processing status
    VBREVE: detail lines
    Each sales document item has revenue detail lines for different periods (per revenue account) representing the revenue forecast
    Revenue account, posting period, amount, processing status
    VBREVR: reference document lines
    Each document line item of the subsequent Invoice or Cancellation
    Accounts, amounts
    I hope that the information are helpful.
    With best regards
    Claudia Neudeck

  • Is it possible to create a BOM  for ROH material for Subcontracting

    Dear Guru's
    As per my knowledge BOM is needed only for HALB & FERT material even if for subcontracting purpose. So is it possible to create a BOM for ROH material for Subcontracting?. Pls help me to get a soln ?
    Regards
    Ragesh

    Ragesh,
    When you are subcontracting the material, the Std SAP says that the material type should be HALB and not ROH.
    But if client requires for any reason that the material should be ROH only, there is no problem in chaning the settings.
    Sumeet

  • No specification is assigned to the material in the BOM item

    hello
    when I want to create or modify certains BOM (cs02), i have this error message.
    It is a warning, but nothing is done in the BOM.
    Where does this error come from ?
    And how to solve it ?
    Thans

    see below the error message :
    Item material 421Z2811-2001 is not assigned to a specification
        Message no. CM_BOMBOS052
    Diagnosis
        No specification is assigned to the material in the BOM item
        00125813-0240.
    System Response
        The system cannot create a composition for the bill of material since
        there is no material-specification assignment.
    Procedure
        Ensure that the items in the bill of material are assigned to one
        specification in each case before the composition is generated.
        Otherwise errors occur during generation and you have to repeat the
        process.
    I Don't know, what is a spécification in a BOM ? Never we have used a "spécification"
    @+

  • Number Range (series) for Billing Document (F2) and Excise Invoice

    Hi All,
    I want to know how the number ranges / number series is defined for billing documents (F2) and excise invoice, for India business scenario.
    In India, the excise invoice is given to the customer so that he can the excise duty/ cenvat. This invoice acts as the Tax invoice (having all pricing elements apart from excise duty) against which customer outstanding is considered. That is, the payment due will be tracked against this Tax (excise) invoice.
    But in SAP, the accounts posting is done (customer a/c debited) when we creaate and post the billing document (type F2). Hence, the outstanding amount is tracked against the billing document created. This billing doc/invoice will have all the pricing components like price, discount, freight, etc apart from excise duty.
    The excise invoice is created separately....with ref to the above billing doc....for posting the excise duty.
    If the number ranges for billing document and excise invoice are different then it is difficult to trace the outstanding amount from a particular customer on the basis of excise invoice created in the system.
    Can somebody provide inputs/solution on this?
    Thanks indvance.
    Rgds,
    Amit

    Hi Saurabh,
    My question is not how to define number range for billing doc and excise invoice? i mean what procedure / tcode to be used for the same?
    My question is whether we need to define same number range for Billing doc (F2) as well as Excise Invoice.
    For example: number range 1000 to 1999  --- same for F2 and excise invoice....
    Lets say billing doc 1000 is created. Further, when we create excise invoice w.r.t. this billing doc....the excise invoice created will also need to be 1000. ....so that we can identify that against this excise invoice, we need to collect the payment from customer.
    If the number ranges for billing doc and excise invoice are different, then it is difficult for the user to trace the outstanding payment .....because genarally the excise is treated as Tax invoice by companies in India ...(so that the customer can claim the excise duty....when he purchases the goods from the company).
    Whereas the customer account is hit when the billing doc is posted .....hence i feel, we need to keep the same number range for billing doc and exice invoice.
    Hope the question/scenario is clear now.
    I would appreciate the inputs on the above, from the consultants/experts who have worked on SAP implementation projects in India.
    Rgds,
    Amit

  • Is Apple planning on changing the material of the plastic?

    If anyone can answer this i've been wanting an ipod nano for the past month but after hearing about the scratching problems... I dont know wat to do. Duz anyone know if Apple is gonna change the material on the nano to fix this scratching problem?

    Erik,
    Anyone that knows for sure is cenrtainly under a Non-Disclosure Agreement with Apple and can't say. Any other opinion is just a guess, so you'll never know the answer, unless Apple makes some sort of statement.
    Nikki

  • You cannot create ARE3 for duty paid Deemed exports excise invoice!

    You cannot create ARE3 for duty paid Deemed exports excise invoice!
    Message no. 4F326

    Hi murali,
    How can you create ARE document for duty paid excise invoice
    ARE docs are for excise exption purpose only
    regards
    bvdv

  • All the pricing conditions are not visible for a given sales area, material

    Hello All,
    There is a customized screen with sales area(Sales org, distribution channel and division), material and sold to party. There is buttton when we click it has to display the pricing conditions. The problem here is it is not displaying all the conditions some conditions like ZB02 and MWST are missing. The Function module used is PRICING.
    Whereas in VA03 tranaction for a sales order created with this sales area, material it is showing all the conditions for a item.
    Please help me to solve this issue.
    Many Thanks,
    Rama

    Hi
    The BP's created for one particular sales area are not getting replicated into CRM, though before sometime it was happening.
    DJ>>  Hope the required sales area is available in CRM.
    The BP with the "general data", and "role of sold to party" only flows but not with the sales area. There is no BDoc error in the SMW01 either. While displaying BP for the role of sold to party, it shows "Sold-to-party(maintained)" but the sales area entries though maintained for this sales area in the ECC, do not flow to the CRM.
    DJ>> Please check the following -
    1. Create a BP in CRM (with the sold-to party role) with the required Sales area and see if this customer when replicated to ECC has the relevant Sales Area.  Ideally it should get replicated if all you middleware settings are fine.
    2. See you have not set a filter for a specific Sales Area and becuase of that BP is getting replicate but not the sales area.
    Hope this will help
    Regards

  • Pricing condition/procedure set up for mark up price

    Hi All,
    I am struggling with a requirement related to MM pricing procedure. Below is the requirement:
    When a PO is created of a material, it will have something called as markup price included in the price of that material. Example- If a material price is 100, it will be made up of basic price 90 + mark up price 10 (two different condition types -PB00 and say ZPB0).
    Now when GR is posted, inventory a/c should be debited with 100, GRIR clearing a/c should be credited with 90 and GRIR clearing a/c for markup (new a/c) should be credited with 10. In short mark up price should be speared out in a different clearing account just like freight clearing account.
    At the time of IR, there should be only one line item showing balance of 100. Note there should not be two line items, one with 90 and other with 10 (just like in case of planned delivery cost).
    So, this scenario is very similar to planned delivery cost scenario except client doesn't want to have two line items in IR.
    Is there any standard way to achieve this?
    Regards,
    Pat.

    If you dont want the mark up to come in invoice separately, why do you want it to hit a GR / IR account? ( in short why use del cost condition )
    If hitting gr / ir is not a requirement and you just need to acrue it, try the following
    PB00 to take 100
    create 2 conditions one positve and one negative ( accrual, without condition category ) to take the value 10
    the + and - will cancel in the inventory account; you can accrue to different accrual accounts

Maybe you are looking for