Error Mapping Not Configured

Dear Guys
I am using a scenario RFC to File from book named SAP XI for developers.
I have created a RFC FM in system A which will be used to create a IDOC in system B. Calling RFC will create a file in XI and in second step file to IDOC will be create in SystemB
I am getting follwing error.
<P1>com/sap/xi/tf/_MM_Z_RFM_MATERIALINPUT_00_to_MT_Ma~</P1>
<P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</P2>
<P3>RuntimeException in Message-Mapping transformatio~</P3>
Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:MT_Material/MATNR. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at
com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute
While I Test Mapping through Integration Repository its working succesfully. But while running Program from System A is not creating a File in XI.
Note : System A , XI and System B are installed on three different machines.

Firstly make sure you have imported the updated RFC into IR..
goto the sxmb_moni and copy yhe payload from the inbond message piplelinestep on the right hand side, copy the payload and goto the test tab of MM and paste it there if this executes then MM is fine.
If MM is fine with copied XML..then refresh the ID cache, IR cache, run the delta cache from SXI_CACHE and CPA cache and check

Similar Messages

Error: System not configured as Integration Engine

Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar Agarwal

Hi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use service=<SENDERSERVICE>instead of
bs=<SENDERSERVICE> parameter in your URL.
bs is replaced by service in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?service=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani

Error "system not configured as xmb" in transaction "sxmb_moni"

Hi,
when I send an IDoc from R3 to XI I get this error:
system not configured as xmb" in transaction "sxmb_moni"
also, in the adaptermonitor of the runtime workbench there is an error in the integration engine.
"no rules for business-system are definied in SXMS_CONF_ITEMS"
This error refers from a another error in transaction idx. so, we have assigned the integration engine client 100, because we work with this client. So, we can start transaction idx5 but, we get the other error, as mentioned.
Can anybody help me please?
Regards
Stefan

Hi Stefen,
try to chk SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server if not try sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine
pls chk for this links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceba9b90-0201-0010-9687-a8b279e388bb
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
if found worth pls do the req
Thanx
Sampath

Generated Proxy Error: System not configured as XI Integration Engine

Dear all,
Using transaction SPROXY I generated a proxy on a Message Interface.
This generated as well a method and the associated class.
When I run it, trying to send data through all this, I get the following error:
System not configured as XI Integration Engine
Here is the model I got on another thread, in order to catch the error text:
DATA: l_sys_exception TYPE REF TO cx_ai_system_fault.
*...proxy call
catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
write: l_sys_exception->errortext.
Anyone has any idea where this error commes from?
I am mostly wondering whether the problem comes from my outbound system or XI configuration?
Thanks a lot, have a nice day!
Isa.

check this thread
https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

Error: System not configured as XI Integration Engine

Hi All,
I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
"2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Integration Engine
2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
what might be the possible errors..
regards,
Rajesh

Hi Rajesh,
you can go through these chek steps
1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and also perform a delta refresh.
3)Check whether your business system is tied to the integration server in SLD.
4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
hope these checks will solve your problem
Thanks
sandeep sharma
PS:If helpful Plz reward points
Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB.

[Solved] wlan0 dhcpd error, interface not configured

Hi,
I am trying to manually configure my wireless card to use dhcp. I followed the wireless setup wiki page, installed the driver, added the module to rc.conf, and verified that it is working by running 'ifconfig -a' and 'iwlist wlan0 scan'. So far so good. My wireless network is WPA protected, so I set up wpa_supplicant according to that wiki page and that seems to be working too. When I run 'dhcpd wlan0', I get error messages such as "No subnet declaration for wlan0" and "Not configured to listen on any interfaces".
I tried setting up dhcpd.conf according to http://bbs.archlinux.org/viewtopic.php?id=49114 and http://bbs.archlinux.org/viewtopic.php?id=49131, but neither worked. I also tried adding wlan0 to the interfaces array in rc.conf (similarly to eth0--which works), but that didn't help either.
I tried this on an open/unsecured network and got the same result.
I found a Red Hat thread that said /etc/sysconfig/dhcpd needs to list the interfaces for dhcpd (http://www.linuxquestions.org/questions … es-372977/). Is there something similar for arch?
thanks in advance for any help,
Kyle
Last edited by kyletreubig (2009-09-22 10:45:21)

I played around with it a bit more last night and I got it to work. For some reason, the subnets 129.168.0.x and 10.0.0.x didn't work and I needed to specify a subnet of 129.168.1.x. I noticed that eth0 was getting assigned an IP of 192.168.1.100, so I decided to include that in my subnet. I also restricted the range to 192.168.1.100-200.
Thanks for the help,
Kyle

Disk Utility Restoring Error - Device not Configured

Hi all,
A mate has given me a USB flash drive that doesn't work. I tried to create an backup image using Resuce Pro from SanDisk and it came up with a NDIF file. What I then did was partioned an external hard drive and restore using the image as source and the new partition as destination. 2 seconds later an error comes up saying restore error, could not validate source - device not configured. Am I the only one that has this problem or have I done anything wrong during the process?
Cheers,
Keefe

NDIF is an obsolete format. You'd probably have to convert it to some kind of DMG first (Images > Convert.)

System not configured as Integration Engine

Hi Friends ,
I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
When I run the zprogram in R3 then I get the error
System not configured as Integration Engine ...
Please suggest .
Best Regards
Chan

Hi Chane,
Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
Refer this Configuration Guide - Page no 27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy

System not configured as XI Integration Engine

Hi
I trigger an interface and get the error " System not configured as XI Integration Engine ". I get this error at the Call Adapter stage. How do I check in the receipient system ?
Regards

Hey,
You can find similar issue faced by other and solution in SDN.
Have a look at these threads.
System not configured as XI Integration Engine
SYSTEM_NOT_CONFIGURED_AS_XMB
regards
Ramesh

Error Interface Mapping Not found..

Hi Friends,
I am simply using file to ABAP proxy scenario.
I am getting error as : This I am getting while test my configuration at Scenario level Tools - > Test Configuration..
Interface Mapping :
Runtime error
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Source_Target_Proxy_: Parsing an empty source. Root element expected!
Plz help.
Regard
Deepak Sodhi

Hi Rajesh,
I am keeping the file as it is from Meassage mapping SRC File..
Message Mapping is giving me no error..
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_Proxy xmlns:ns0="https://tcsfenest/test">
 <EmpId>315143</EmpId>
 <EmpName>Deepak Sodhi</EmpName>
 <EmpOffc>Gurgaon</EmpOffc>
</ns0:MT_Source_Proxy>
Only at the time of Testing configuration Environment -> Test Scenario.
Its giving me error Interface mapping not found.. My strucuture is flat.
DT - Complex type
Empid element string
Empname element string
Empoffc element string
Please help to resolove this issue.
Regards
depak

Debuging mapping - error : Could not find test data for target operators ?

Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.

Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help.

"User Mapping not fully available" error in EP6 SP9

Hi,
I am trying to set up a user mapping in EP6 SP9
I have created a system (usig the "Dedicated Application Server for R/3 System" template, not sure if that is correct but I didn't think it would matter),
and an alias and everything seems fine until I try and create the mapping itself
In the "User mapping" window I click edit of the user I want to map, that works
I then type in a username and password (and domain since I have added that property)
When I press "Save" I get the error below
Anyone know what might be wrong?
Vin
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_mapping/com.sap.portal.userMappingAdmin/com.sap.portal.userMappingAdmin
Component Name : com.sap.portal.usermanagement.admin.UserMappingAdmin
User Mapping not fully available..
Exception id: 02:20_07/01/05_0006_31293550
See the details for the exception ID in the log file

Hi Vincent,
I installed the SP9 preview yesterday and had exactly the same problem. However I think I found a solution. Try the following:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
Hope this works for you as well!!
Best regards,
Markus

While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

storage-vdc(config-if)# show module
Mod Ports Module-Type                         Model              Status
2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type                         Model              Status
2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
Mod Sw              Hw      World-Wide-Name(s) (WWN)
2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4    5.2(2)          0.107   --
7    5.2(2)          1.8     --
8    5.2(2)          1.8     --
10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model:                 DS-X9708-K9
Type (SFP capable):    10Gbase-SR
Speed:                 1000,10000
Duplex:                full
Trunk encap. type:     802.1Q
Channel:               yes
Broadcast suppression: percentage(0-100)
Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
Rate mode:             dedicated
QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
CoS rewrite:           yes
ToS rewrite:           yes
SPAN:                  yes
UDLD:                  yes
Link Debounce:         yes
Link Debounce Time:    yes
MDIX:                  no
Port Group Members:    none
TDR capable:           no
FabricPath capable:    yes
Port mode:             Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
    transceiver is present
    type is 10Gbase-SR
    name is CISCO-FINISAR
    part number is FTLX8571D3BCL-CS
    revision is C
    serial number is FNS12090EMJ
    nominal bitrate is 10300 MBit/sec
    Link length supported for 50/125um OM2 fiber is 82 m
    Link length supported for 50/125um OM3 fiber is 300 m
    Link length supported for 62.5/125um fiber is 26 m
    cisco id is --
    cisco extended id number is 4
           SFP Detail Diagnostics Information (internal calibration)
                                     Alarms                  Warnings
                                High        Low         High          Low
Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
Tx Power       -2.65 dBm       1.49 dBm -11.30 dBm   -1.50 dBm     -7.30 dBm
Rx Power       -2.21 dBm       1.99 dBm -13.97 dBm   -1.00 dBm     -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warning

Ankit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

OSB Error in Eclipse: The JCA dependency is not configured.

Hi All,
I am trying to use db adapter in OSB and I created the adapter in jdev and imported it in Eclipse.
I have installed Weblogic,OSB and configired the domain for osb, I can login to OSB and weblogic console.
I followed these steps to get there and now the db.jca file shows errors The JCA dependency is not configured.
http://guidoschmutz.wordpress.com/2010/08/08/oracle-service-bus-11g-and-db-adapter-a-different-more-integrated-approach/
Few of the things I noticed:
when I tried to copy the adapter from eclipse/plugin/*.jca/Dbadapter to Jdev/integration/lib/Dbadapter
I dint find one in eclipse/plugin/*.jca/Dbadapter
I created a OSB Configuration Project and not sure if it was created correctly and affecting this, as a matter of fact
are there any configurations I am missing to start.
I have like tight schedules and would really appreciate any help.
Thanks a lot again..

Yeah I checked that the wsdl is present.
One more thing I am noticing is the wsdl created in Jdev 11.1.1.4 doesnt show the binding and port when imported in the OSB Project resources.
Is there a way we can fix this?
Thanks.

"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"

We are running into a problem which we have noticed on UCCE 8.5 and havent seen on earlier 7.5 release.
If we setup a CTI port as agent device target and if we try to login the agent using Cisco Desktop (Not CAD, just CTI OS Client) then we get following error:
"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"
But this wasnt the issue with 7.5 and we were able to do agent login with CTI Port as device target. We dont intend to use Mobile Agent feature but just login UCCE agent to CTI port as the device.
Do we know if this is a known issue or if something has changed between 7.x and 8.x release which could be is causing this?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Error Mapping Not Configured

Similar Messages

Maybe you are looking for