Error Mesage (Yield Qty + ScraP qty)

Greetings..
                i created order with qty as 10. during confiramtion in co11, when i enterd  for first opeartion yeild qty as 10 and rework qty as 1, then i am gettting error overdelivery not allowed.
Means Yeild qty + rework Qty gretaer than Planed qty errror mesage comes .
Now i want to carry the same message when i enter 10 qty as yeild and 1 qty as scrap.
How to get this mesage when yeild qty + scrap qty greater than planned qty.

Dear,
In OPk4 - Define confirmation parameter, select your palnt & Order type. Select 1st tab page, select Over delivery - Error message if over delivery.
So system will give error message if over delivery.
In material master work scheduling view enter Over delivery tolerance if required.
You can do it with the Transaction: OPJB: Change the Message Type for RU117 from W to E.
Regards,
R.Brahmankar

Similar Messages

  • Exception message 26, (only warnning not an error mesage).

    Dear Experts
    my environment is MTO, which generates a huge number of production orders daily with a big number of exception messages which some times are not enough to adopt the PP activities on the system,
    in the case of  (Procurement type:X) which the planned order for a HALB or FERT, material can be produced internally or procured externally, i can partially convert a part of the total quantity into a production order or a purchase requisition  and so the remaining qty,  into any of the both procurement proposals.
    now if the total quantities of the partially converted production orders and purchase requisition, is exceeding than the planned order qty, i am getting the exception message 26, (only warnning not an error mesage).
    my requirement: i want the system to restrict users to covert the planned order into a production order or a purchase requisition if the total quantities of all the partially converted production orders and purchase requisitions are exceeding more than the original planned order quantity.
    Example:
    planned order qty, is 10 EA, if i convert a qty, of 3 EA into a partial production order and another qty, with 4 EA into a purchase requisition,
    system must restrict me to convert the remaining qty, into a production order or a purchase requisition  if i changed the qty, to a qty, exceeds more than 3 EA.
    Thanks in advance.

    Ahmed,
    Exception message 26 is neither a warning nor an error.  It is an alert that a certain business condition exists (excess stock in a segment).  The general rule for exceptions is that it is up to the planner to determine the significance, and to use your company's business rules to react accordingly.
    The solution to your stated requirement does not exist in standard SAP.  To me, it makes no sense to lock the system down in this way.  Message 26 can come from overconversion, but it can also come if the requirements are reduced.
    If you still feel that this functionality must be implemented, I would suggest this partial solution, that uses standard functionality.  Have your planners perform only the conversions of the plndords to firmed purchase reqs, for a given time frame, all at one time, and decline to convert the remaining balances to production orders. Then, re-run MRP with delete/recreate.  This will create planned orders for exactly the balance(s) required.  Then, you could immediately use the standard mass program to convert the 'balance' Planned orders to Production orders.  The mass conversion could be the second step of an auxiliary MRP job.
    If you insist that the requirements must be met using the method you indicated above, then it implies that every program that could be used to convert a PlndOrd to something else must be modified.  I don't think I would attempt this unless there were no other possibilities.
    Best Regards,
    DB49

  • When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

    When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

    How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

    The IOS5 upgrade will erase everything on your iPad, so make sure you have a good backup before you start.
    If not, you will just have to reenter all of your settings all over again.  Have you ever backed it up successfully?

  • Parameters for Yield and Scrap quantities in BAPI MB_CREATE_GOODS_MOVEMENT

    Hi All,
    I am using BAPI MB_CREATE_GOODS_MOVEMENT and MB_POST_GOODS_MOVEMENT to carry out the confirmation and Unplanned Goods Reciept.
    Which parameters in MB_CREATE_GOODS_MOVEMENT i have to use for passing Yield and Scrap quantities.
    And from which table i can fetch the Material for the Order? Can i use AFKO for the material number.
    Please give some inputs on how to use these Function Modules.
    Can i use only MB_CREATE_GOODS_MOVEMENT for the confirmation.
    Thanks,
    Anil.

    Hi,
    I presume you are referring to production order confirmation. Refer these:
    BAPI_PRODORDCONF_CREATE_ACT    Enter activity confirmation
    BAPI_PRODORDCONF_CREATE_HDR    Enter Order Confirmations
    BAPI_PRODORDCONF_CREATE_TE     Enter Time Event Confirmation
    BAPI_PRODORDCONF_CREATE_TT     Enter Time Ticket Confirmation
    Regards

  • Error Mesage is "Could not reserve record (2 tries) keep trying ?

    sir,
    when i running my form i m reciving this error message Error Mesage is "Could not reserve record (2 tries) keep trying ? " This is due to multi user Login, How can i avoaid from this error message.

    when you begin changing queried values, forms locks the record for other users by default. so this message appears if another user tries to change (lock) the same record. you have to wait until the locked record is commited or rolled back.

  • Always pop-up  error mesage when i run the cd-rom program

    Always pop-up  error mesage when i run the cd-rom program - Macromedia Projector發生問題，必須關閉，謹此致歉

    You need to disable "Autoplay" for your CD drive. In the Control Panel under Hardware.

  • HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW:  The operation couldn't be completed. (OSStatus error -61.)

    HOW CAN I AVOID THIS ERROR MESAGE WHILE TRYING TO EXPORT AN IPHOTO SLIDESHOW:  The operation couldn’t be completed. (OSStatus error -61.)

    Hello,
    I believe the issue was the external HD I purchased was not formatted for Mac . . . once I took care of that - all went well!  The slide show transferred and the surprise 70th birthday party was a huge sucess.  Thank you everyone!

  • Ipod itunes error mesage we are unable to continue with your activation

    ipod itunes error mesage we are unable to continue with your activation

    Are you getting this error? If so have you waited or contacted Apple?
    Apple - Support - iPod touch - Contact Us

  • Has any one encountered a problem renting Movies and getting an error mesage (-42110)?

    Has anyone encountered a problem renting moives and getting an error mesage (-42110) and movies won't play?

    Hello there, rainman214.
    The following Knowledge Base article offers up information on your exact error message. It's found in the section entitled: "Specific Conditions and Alert Messages: (Mac OS X / Windows)":
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    "Error 3001,"  "-42110," or "5103"
    This alert is related to iTunes Store movie rentals and authorization issues.
    Make sure you are using the most recent version of iTunes and QuickTime. They both can be downloaded free of charge.
    If your iTunes is up to date, remove the SC Info folder.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Scrap quantity to be minus from yield qty. in the confirmstion(co11)

    i have problem in confirmation of production order.
    suppose i have production order of 15 qtys.with four operation to be confirmed (co11).
    operation qty.yield srcap qty.
    0010 1 5 0
    0020 14 1
    0030 14 0
    now, in 0020 operation i have 14 yield & 1 srcap quantity & when i go for 0030
    operation for confirmation it will show the default quantity of previous operation,0020 qty. i,e 14 qtys.but if i put the quantity 15 in this operation (0030)
    its allowing to confirmed 15 qtys. because the plan qty is 15.but i want to minus the 1srcap qty. from 15 plan qty. & system should allowed only 14 qtys
    (15-1=14) for confirmation.plus i want the flexibility of operation sequence not to checked.
    i set operation sequence - error when operation sequence is not adhered to in OPK4,its minus the scrap qty. but not allowing the flexibility of operation sequence
    confirmations.
    please send me the setting for the above query in the confirmation (co11)
    regards,
    mangesh

    Hi Mangesh,
    If QM module is active let quality people decide whether it should be scraped or not?
    dont use scrap in Co15
    Thanks
    Bala

  • Error in confirmed qty after V_V2 update

    Hi Experts
    This is a very strange issue im facing. The scenario is as explained:
    The moment, there is an inward delivery in the warehouse, the user runs the rescheduling program V_V2 to update the confirmed quantity of backorders.
    The problem here is, the confirmed quantity of the main item in material substitution is wrongly updated as completely confirmed even thoug the sum of the confirmed quantities in the sub items is not equal to the order quantity.
    Example:
    Item 10 of sales order created for 50 NOS on 21.04.2011.
    Due to material substitution, Item 11 and item 12 are generated for 20 NOS and 30 NOS respectively
    21.04.2011
    Item          Ord Qty        Rounded Qty          Confirmed Qty     Item Category
      Item 10      50                    50                         20                              TAX
      Item 11      20                    20                         20                              TAPS
      Item 12      30                    30                         00                              TAPS
    Looks fine till here.
    25.04.2011 - V_V2 run by the user.
    Item          Ord Qty        Rounded Qty          Confirmed Qty     Item Category
      Item 10      50                    50                         50                              TAX
      Item 11      20                    20                         20                              TAPS
      Item 12      30                    30                         00                              TAPS
    Here as you can see, the confirmed Qty of the main item is changed to 50 even though stock not available.
    Due to this, orders which have these issues are appearing in the delivery due list in VL10A, though they dont have stock available to deliver the goods.
    I have checked in MD04, CO09 and checked every other settings related to availability check but in vain.
    I even tried CO06 to change the confirmed quantities, but only the sub items are appearing in the list there.
    Please advise what needs to be done.
    Thanks & Regards
    Madhu
    Edited by: Madhu Naidu on May 2, 2011 12:51 PM
    Edited by: Madhu Naidu on May 2, 2011 2:17 PM

    Hi Marian
    Thanks for your response.
    I checked OVZ9 and there only reservations, sales reqmts and deliveries are ticked for inward/outward movments.
    Yes you are right that in rule 02 / RP, it considers all movements. In that case why only the confirmed qty of the main item is updated incorrectly and the sub items are not. And how to avoid this as this is including order items (orders) without physical stock also in the delivery due list in VL10A.
    Thanks & Regards
    Madhu

  • Premiere Elements slide show error mesage

    After preparing a slide show I went to "Share" and checked "Burn Video DVD/Blue ray. When Premiere Elements loaded and went to download my project file I received an error message as follows "This type of fie is not supported, or the codec is not installed".
    I cannot create the slide show on a dvd.

    rickyrun
    I had been working on the Premiere Elements 13 Windows tryout, trying to cover as much as possible. The tryout has expired. I should have the purchased version by the end of the week.
    Elements Organizer 13 is a "new breed" of Elements Organizer along with it "Slideshow".
    You say that you have created your slideshow (presumed with one of its 5 themes) and saved it as an Elements Organizer 13 Slides Show Project.
    From that point on, this is my take on this which I will confirm again later in the week when I have the purchased version...
    a. The Slide Show Project is a creation of the Elements Organizer 13 and remains in the catalog, available for re-edit (limited).
    b. The only way out of the Elements Organizer 13 for this created slideshow is Export to yield an AVCHD.mp4 file either 720p30 or 1080p30 which
    is saved to the computer hard drive.
    c. It is those AVCHD.mp4 files that can be imported into a Premiere Elements project with Premiere Elements' Add Media/Files and Folders/Project Assets.
    d. I do not recall there being a viable opportunity to use the Slide Show Project thumbnail in the Elements Organizer 13 workspace for a Share/Burn Video DVD or Blu-ray.
    Elements Organizer Help | Create slideshows
    More later.
    ATR

  • I have uninstalled and reinstalled the new iTunes but it still will not work.  I keep getting the error mesage relating to MSVCR80.dll, the installation error 7 (windows error 126). I have tried moving and removing the dll files including the QTMovie dll

    I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
    I have tried moving the dll filesincluding the QTMovie dll file to now avail.  Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast.  Can anyone please help???

    Dear avid iTunes users - I have cracked it!!!
    The response from Apple/iTunes was extremely poor and did not solve the problem.
    I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
    So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
    So ... I simply deleted the Apple folder found in C:\program files\common files\.
    I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
    I reinstalled the current version of iTunes (for the 16th time!)
    Hey presto!!!
    IT WORKED :-O Woooohooo!!!
    So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
    YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
    Nuff said.

  • HT1386 I repeatedly receive an error mesage when trying to sync my ipod touch with my new computer, "some of the items in the itunes library, were not copied to the ipod because you are not authorized for them on this computer."  My computer is authorized

    I repeatedly receive an error message when trying to sync my ipod touch with my itunes library with my new computer which reads, "Some of the items in the itunes library were not copied to the ipod because you are not authorized on this computer." However when I try and authorize my computer I always receive the message that this computer is authorized. What am I doing wrong?  I'm missing about 100 songs as a result of this error!!

    See:
    iTunes Store: About authorization and deauthorization
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    Could the items be purchased by another account?

Maybe you are looking for

  • ABAP query using logical database KDF is not populating custom fields

    Hi Experts , I created two following queries 1.       VENDORCATKDF – uses KDF logical database 2.       VENDORCATLFA1 – uses table = LFA1 I'm pulling the same information in both queries: ·         Vendor Number ·         Country ·         Vendor Nam

  • "Factless" fact table join warning

    We have a physical fact table that only contains keys for a given day in order to track changes to Employment history over time. The compensation "facts" are contained in a dimension that is joined to the factless physical table in the logical layer.

  • [SOLVED] Odd window manager problem...

    I have installed Arch and a full Gnome DE. However when I start gnome, I get an odd window manager. I tried metacity and metacity --replace in a terminal, but I just get "Window manager warning: Screen 0 on display ":0.0" already has a window manager

  • Tried downloading itunes 10.5 and says old itunes can't be removed

    I tried to download new itunes 10.5 and it gets all the way to where it removes old itunes and says old itunes can't be removed contact tech support.

  • DEAD new ipod, used 2 hrs, won't charge, turn on or reset, help please?

    Today my son was happily using his brand new IPod, then left it to charge, even though it was still half full. The do not disconnect screen came on, so he left it charging. When he came back, the screen was blank! It will not even charge, will NOT tu