Error message "14 no EP Cart"

What does this error messge mean? I'm assuming it's the ink cartridge, but it's in there. Any suggestions would be helpful.

Thank you for your response, Pat. I was able to use another pdf viewer to read the rest of my document. I am so accustomed to reading pdf files with Adobe Acrobat Reader that it took me awhile to realize I had other alternatives.
I used Word Perfect to convert Word Perfect files to pdf format; however, the file that I was trying to read (File 1) was downloaded in pdf format, not converted. I only mentioned the conversion of other files to pdf because I had trouble closing the converted pdf files while the file I wanted to read was open in the background, and thought that trouble was what corrupted File 1. I ended up reinstalling Adobe Acrobat Reader X and have not had the freeze up problem since; however I still could not access the rest of File 1 with Adobe Acrobat after reinstalling Acrobat, but I was able to view the rest of the file with FreeFileViewer. I don't think the file is corrupted since I was able to view it just fine with FreeFileViewer, so maybe I am still having problems with Acrobat.
For future reference, what do you recommend to fix corrupted pdf files?
Thank you. I very much appreciate the online support.
ChangerNow

Similar Messages

Enter a vendor error message for catalog shopping carts

Hi Viewers,
I am facing problem while creating PO in backend R/3 system by using catalog shopping carts.
Procedure:
I have created catalog shopping cart with vendor.
when i click on order button shopping cart has been created successfully.
But when i see the history in BBP_PD transaction it went to error.
I can see the error message in RZ20 transaction under SAP B2B Procurement - Monitors -->Shopping Basket as follows:
"Shopping cart 3000841126 (PO 2000251272): 06 049 Enter a vendor"
Is there any config settings missed out or anything else need to do for the same.
while transferring data from shopping cart to banckend system vendor is initialising.
Please help me how to fix the issue.
Thanks in Advance,
Prashanth P.

Hi Prashanth,
This is very strange, please check if any of the following BADI's
are active, if so please temporarily deactivate them and retest. These would be the most likely cause of this as there are no notes about this. Also very few other customers with similar issue.
BBP_CREATE_BE_RQ_NEW
BBP_CREATE_BE_PO_NEW
BBP_CREATE_REQ_BACK
BBP_CREATE_PO_BACK
BBP_DOC_CHANGE_BADI
Hope this helps,
Kind Regards,
Matthew

Error message while creating shopping cart in SRM 7.0

Hi,
While creating shopping cart in SRM 7.0, an error message is coming as 'No authorization to purchase from product category <product group>'.
Is there any missing authorization.
Thanks
Saswata

Hi Saswata,
Can you confirm if the "Extended Attributes" of the user's position in Org Structure has the product category maintained for the appropriate backend system?
Regards,
Nikhil

Buffering table not up to date error message when creating a Cart

Hi Folks,
We are getting a 'Buffering table not up to date' error message when attempting to create a Cart. The error message only happens to the one end user ID only with the others not getting this error, therefore suggesting that my SRM org plan set-up is correct.
Has anyone come across this previously and what checks are available in the system to resolve this? As mentioned, the attribute check is okay and I have also removed the user ID from the SRM org plan and reassigned again but this has not corrected the problem. We are on SRM 5.
Thanks. Mike.
Message:
Buffering table not up to date
Method: GET_STRUCTURE_PATHS_UP of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_ID of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Form: USER_DETAIL_GET of program SAPLBBP_SC_APP
Form: GLOBAL_FILL of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
Form: APP_EVENT_HANDLER of program SAPLBBP_SC_UI_ITS
Edited by: Mike Pallister on Nov 5, 2008 11:44 AM

Please advise on this problem. When I try to check the Approval Overview tab for these two shopping carts.
I got a dump.can anyone help me.
Information on where terminated
    Termination occurred in the ABAP program "CL_BBP_ES_EMPLOYEE_MYS========CP" -
     in "IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 35
    of the (Include) program "CL_BBP_ES_EMPLOYEE_MYS========CM008".
    The termination is caused because exception "CX_BBP_ES_INTERNAL_ERROR" occurred
     in
    procedure "/SAPSRM/IF_PDO_DO_APV_EXT~GET_AGENT_DETAILS" "(METHOD)", but it was
     neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "/SAPSRM/CL_PDO_DO_APV_EXT=====CP "; its source
     code begins in line
    1 of the (Include program "/SAPSRM/CL_PDO_DO_APV_EXT=====CM00E ".

Error message while creating shopping cart

Hi
I am facing issues in SC creation. Getting error messages u2018purchasing group for follow on document missing & u2018purchasing organization for follow on document missingu2019.
Is it something to with RFC or authorizations
arjman

Hello,
You can try to set an external breakpoint in FM BBP_PD_MSG_ADD and check why system is throwing this message.
Checking the call stack you can see which setting is missing in your system.
Regards
Ricardo

"Not enough memory available" error message when accessing Shopping Cart

Can someone please help, as iTunes and Apple support can offer none at all. When I try to purchase songs or albums, or subscribe to podcasts, I get an error message that reads: "We could not complete your iTunes store request. There is not enough memory available. There was an error in the iTunes store. Please try again later."
This has been going on for days. I've switched to 1-click shopping, uninstalled and reinstalled iTunes, turned the machine on and off, and still get nothing. There is plenty of hard drive space, and have tons of free RAM.
Any ideas?
Thanks!

I just noticed all three of us have a Dell computer....did either of you recently update your BIOS? I did and just after is when I noticed the problem with iTunes that we're all having. I realize it could be just coincidence, but I can't think of anything else that changed that may have caused this problem. I was considering reverting to the old BIOS, but have done some research (mainly on forums) and don't see any mention elsewhere of this, although alot of people mentioned going back to the old BIOS for other reasons. If I can't find anything else in a day or two, I'm going to uninstall and re-install itunes. I'll report back if this helps or does nothing.
thanks,

Warning to Error Message while creating Shopping cart

Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RK

Hi Richy,
The cost centre which you have maintained is locked for postings. Try to change the cost center and the warning message should be gone.
If you still want to chnage the message from warning to error,you can do in SPRO-->img->SRM->SRM Server -> Cross app basic settings->message control -> Influence message ctl.
If an entry doesnt exist for this message in SPRO,make an entry in view BBPV_PDMSG (Tranx: SM30).
See these related threads for more pointers:
Re: Error Messages in BBP_PD
Re: How to change an error message to a warning message in SRM
Re: Where can I change type of message BBP_PD 083 from warning to error
BR,
Disha.

Populating error message based on search help

Hi team,
How can we populate error message in a shopping cart account assignment "order " field for the bellow two senarios. I am adding a custom field called "Operational Activity" in account assignment. based on which search help has to be done
the 2 senarios are
1. When user does not select the "Order" but tries to search for the operational activity, he should get error .
2. When user selects the "Order" and this order has an operational activity linked to it, then give error message to input the OA The logic will be to do a RFC call to ECC by sending the SRM Order number BBP_PDACC-ORDER_NO to ECC table AFKO and see if there is AUFPL.
Edited by: goutam kolluru on Nov 16, 2011 5:48 AM

Hi Anshu,
Thank for u replay.
yes it can be done using doc_check_badi, but my question is how can we display error message by comparing search help values.
if user is not entering value of order field and select search help for custom operational activity field how it can be done in check badi.
Edited by: goutam kolluru on Nov 16, 2011 6:54 AM
Edited by: goutam kolluru on Nov 16, 2011 6:59 AM

SRM 7.0 Process-Controlled (BRF) Workflow -- Error message to Shopping Cart

I am modifying a BRF Expression used to calculate approval levels. During this calculation, I may run into error conditions (e.g. Currency tranlsation not found) that I want to display to the user (in the Shopping Cart).
I have tried raising the following exceptions:
/sapsrm/CX_WF_RULE_ERROR.
/sapsrm/CX_WF_RULE_ABORT.
Raising these exceptions do result in SLG1 log entries being written, but the User is not informed of the error (ie. at top of shopping cart where other messages display).
I can probably jump out of the Webdynrpo to read logs, but thought there MUST be some standard way of passing error conditions from the BRF, back to WF, and then back to the Webdynpro Window.
Anybody raise error messages back to the online user from Process-Controlled Workflow?
Thanks,
- Tim

>
Saravanan Dharmaraj wrote:
> Hi Tim,
>
> I am not sure about your business requirement, but if you want to display custom error message while user create a SC, SAP has provided a standard BADI - BBP_DOC_CHECK_BADI. You can implement this Badi to raise a custom error,warning message. You can build your brf logic in the BADI implementation..
>
>
> Best Regards,
> Saravanan Dharmaraj.
Hi Saravanan,
I am actually modifying the Approval Limit Checks (for multi-currency translations) that you recently coded in Maryland. It can occur that errors occur in determining limits (new Currency translation I just added), or during the lookup of agents (ie user config is inconsistent).
In these cases, I can make the shopping cart Dump, by raising untrapped error messages, or assertions. However, I would like to raise exceptions that get trapped (such as the ones I identified in original post), and then make their way to the shopping cart.
Unless I am missing something, I don't think the WF BADIs, or BRF are gonna communicate errors back to the shopping cart, even though these components are called during cart creation and checks.
I realize that I can recode the Agent Determination BADIs, BRF calls, or even read BRF logs within BBP_DOC_CHECK_BADI. I mentioned this in my original posting as well.
Anyway, any help is appreciated.
Thanks,
- Tim

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

Display error message from SLG1 on shopping cart screen

I have implemented a 'BBP_CATALOG_TRANSFER' badi. I am adding all the custom error messages in ET_SC_MESSAGES export parameter of this badi. As a result of this, all the custom error messages added in the above parameter, gets logged in the application log SLG1 automatically and I can see those custom messages in SLG1. Now how to display this message from SLG1 on the shopping cart screen on the top where you normally see standard error messages in red.
Can anyone please help me on this?
Thanks,
Krupa

Hi
Which SRM version are you using ?
I have not tried this... but I think this is not possible to display error messages
using BBP_CATALOG_TRANSFER BADI.
Try to code your logic in using BBP_DOC_CHECK_BADI for filter type - BUS2121 (shopping cart). You need to add your custom message in ET_MESSAGES [] table.
For sample coding, refer to the link below ->
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/bbp_doc_check_badi-CheckPurchasingDocument&
Hope this will definitely help.
Do let me know.
Regards
- Atul

Vendor not released warning as an error message in shopping cart

Hi,
When we are creating a Purchase order in SRM R/3 system, If we select a vendor which is not released then we get the Error message saying Vendor is not released and processing stops there.
Similarly while creating a Shopping cart with the same vendor it just gives a warning message instead of error. Is there any way of converting the warning message in case of Shopping Cart to an error message ? Is there any BADI available ?
Thanks,
Sreekanth

Yes when we are creating any shopping cart or any PO , for validations we are using one check badi.
Try this Badi :
BBP_DOC_CHECK_BADI.
Hope It helps......

Shopping cart not created, error message 'Error in Transfer'

Dear Guru's,
While creating a shopping cart in the product category, the system is giving an error message 'Error in transfer'. We are working in the classic scenario.
When we check in the table BBP_PDBEI, the logical system shown is SRM system. Ideally, the logical system should be that of the ECC backend system. Could you please help us where we can go wrong in the settings?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hi
Please refer to the below links
http://wiki.sdn.sap.com/wiki/display/SRM/TransferprocessoftheShopping+Cart
http://wiki.sdn.sap.com/wiki/display/SRM/Follow-ondocumentdetermination%28PR%2CPO%2CRS%29
Hopefully this would resolve your problem.
Thanks,
Ashish

Shopping cart error message

I am getting an error message when attempting to purchase songs. It tells me that my cart contents have changed... to review my cart and then click Buy.
When I attempt to follow instructions.. it just repeats itself.
Any suggestions? Thanks.

I'm having the same problem. I purchased some items via a CC on 8/30. I recently put in a GC and iTunes updated itself and now suddenly I'm getting the error listed above. Any insight on the problem would be great!

Shopping Cart error message in SRM 5.0

Hi All,
When I attempt to create a text description cart, I get two error message below.
Please can some recommend how these can be debugged/resolved or investigated further. I receive these messages the moment I click on 'Describe Requirement' and cannot get any further past this message before the system throws me out:
1. "Number range 01 does not exist" (I get this message even though I have already maintained these in SPRO with standard range '1000000000 -1999999999),
2. "Interface Data contains errors",
3. "Error in system; shopping cart cannot be processed further".
Any help and suggestions would be appreciated!
Many Thanks

If yuo have set up the number ranges then please make sure that you provided appropiate number ranges in transaction types as well.
Define Transaction Types -> BUS2121 -> SHC
Regards
Kathirvel

Error message "14 no EP Cart"

Similar Messages

Maybe you are looking for