Error message " bottleneck"

Hi there
Am using SRM 4 and when I am using the webfront of SRM and i try to create a shopping cart or click on any link on the navigation pane, I get a message saying "bottleneck" (cant remember the exact words) Is there an OSS note to fix this?
Kind regards

Hi
Pradeep notes must help you permanently.
Rallapalli tricks helps in sandbox.
Dump - Memory Bottleneck
br
muthu

Similar Messages

Adobe Premiere Elements 7 With Worthless Error Messages.

I have been a programmer since 1984, and if I saw a programmer in my team wrote these worthless error messages, I would go into my office and kill myself.
I Googled them, and I found them discussed; but the responses were of no use to me, mostly.
1. The error message I got that brought me to the edge of a cliff is: "Sorry, a serious error has occurred that require Adobe Premiere Elements to shutdown. We will attempt to save your current project."
Then it crashed.
When I was taking Operating Systems in my computer science class, a crash means you will get no more than 60 (out of 100). At IBM, a crash is always a SEVerity 1 issue. There is no way around it. Crash means the program is worthless.
I Googled it, and Adobe suggested it could be some drivers using virtual audio. I uninstalled everything I could find, and this problem is not going away. I looked at the sound device configuration, and it's using physical audio, not virtual audio.
I uninstalled Premiere Elements 7 five times and reinstalled them. They still failed. Finally, I reinstalled it at a different location, and it managed to "Found default catalog. Trying to open the default catalog." Then crashed.
If I wanted to use the default catalog, I would have said so. If I knew where they are, I would have set them on fire.
Anyway, I have a project due this afternoon, and I am stuck with these worthless Adobe Premiere Elements 7 error messages. No wonder Steve Jobs banned Adobe Flash. They are pretty worthless.
Sorry I am so upset, because none of you need to read my frustration; but I am up to my neck with Adobe. Once I get my project done, and I am switching to SONY Vegas.
But, for now, would someone tell me how to get rid of these problems so I can get the video edited? Thank you.

I noticed these errors were reported years ago, and Adobe has done NOTHING to improve it.
Go back to my little list of how problems, crashes and errors sort out. That was how it was way back with Premiere programs, and how it still sorts out.
Even the patch for PrE 8 was mainly to get it functioning with nVidia and ATI graphics cards. Yes, those "fixes" probably straddle the line between Bugs and system, with a nod towards Bugs. I know that Adobe takes their Bugs very seriously, and work overtime trying to find fixes for those, that do exist. Though it took a bit of time, as they gathered info, still Adobe had a patch, and that is rare for PrElements, due to the normal lifespan of that program.
I provide some of the same answers today, that I did years ago, to fix the problems. In nearly every case, things sort out per that list. As "system" is both #1 and is also by far the largest segment of causes, that is where I begin looking. With PC's, there are myriad configurations, and most are not suited for video editing. Too many load up their e-machine and expect to edit HD material. Obviously, that is not the case here, but there could still be equipment incompatibilities, or just some tweaking needed. I see similar in the PrPro forum, as the Mac-users put the program on their MacBook Pros, with one tiny HDD, and a very weak CPU, and things go horribly wrong. If PrE was ported for the Mac, we'd have the same issues here. Usually, my first question will be about the I/O sub-system, i.e. the HDD's, their size, speed, free space, controller type and how they are allocated. Video editing is highly I/O intensive, and most computers are not even close to being able to efficiently handle it. I recommend a minimum of 3x SATA, physical HDD's, and suggest that they be setup to spread the I/O workload over all three. Some manage with a 2x I/O, but that is below MY minimum, and is the real minimum from Adobe. A single HDD I/O is just going to cause bottlenecks, and there is no way around that.
Once, it was more the domain of the PC, that one had system issues, as Mac's were so limited and controlled. Now, as they have gained the ability to expand beyond the absolute control of Apple, those users are finding out that systems DO matter.
Notice #2 - Assets. Not all AV material is meant to be edited. Some, like AVCHD (a consumer format) will require a pro-level computer, just to get smooth playback! The second most common issue is trying to edit material that has something like the Xvid, or DivX CODEC.
Number 3 - Project, is very important too. One must match their Project Preset to their source footage. If not, then there will be problems. The failure to do this match is one of the biggest causes of issues, though usually not crashes, or hangs.
Number 4 - OE, is when a user decides to push a button, and expects something else to happen, and often because that's how it worked in another program. Many argue with me that #2 and #3 are OE too, but I am much more lenient, than they are.
Then, there ARE the Bugs. PrPro CS4 had a bunch. CS4.1 fixed a few, but broke some other things. It was not until CS4.2, that things got corrected, mostly, with that version. Then, CS5 hit, and seems quite good, but has a few Bugs too. Some were left over from CS4. A new update for CS5 is coming, and soon. Will it also fix those lingering Bugs? Only time will tell. Will it be a perfect program? Doubtful, but I'll bet that it'll be a "better" program.
Think back to when you started programming. You were writing apps. for the majority of the install-base. However, what happened if the user had Extended Memory? What happened if they had Expanded Memory? What happened if they had both, and a software manager to handle those? Most still had 640KB. By that time, I had 2GB, though my MoBo could only handle 1GB with the managers. How could you write for me? I was 1:1000000, or maybe even less. I had to do my programming on the fly, and often had boot discs for different programs. It's not that much different now, except that I would not be such a rarity any more, but hardly mainstream.
I'll bet that we can sort much out, by tackling the "Big 3," and then working down, if necessary.
I like doing test Projects, keeping things simple, and testing as we make them more complex. That helps isolate the issues in most cases. In another thread, the poor user says that all Project Presets, all formats and all Export setting yield issues. My first thought is to isolate on one Project Preset, one set of Assets, and see if it's a system issue.
Sometimes it's easy, and that is good, 'cause the user gets to editing and not fritzing so much. Just nailed one in Encore, but the poster gave me all the data necessary, and my memory did not fail me (maybe it was not "wine-thirty yet?). One post, and one correct answer. Life is good. Sometimes, it takes days, and many posts, to narrow things down. In but a few, there is an answer. In those (like the PGC error in Encore) one never does really solve the issue, and the only hope is to get the OP to start over, do everything by the book, and hope for the best, this time around.
Good luck, and be assured - I do feel your pain. If I have not had one of THOSE error messages, believe me, I have read of them too many times.
Hunt

Error messages in LiveCache

Hello,
I have the following error messages when i check the alert monitor in dbacockpit and the bottlenecks in LC10:
Critical Logging Event    Error OM13
High : Log_WriterTaskSynchronizer::m_spinlock: collision rate 0.02%, 1 collisions, 30000 spin loops, 66356 yield loops, 5704 accesses
Does anybody know what that means ?
Thanks for your help.

Hello Youssef,
What is the version of the liveCache on your system?
1) "Critical Logging Event Error OM13"
    You have the critical LCA logging events. Please check the errors in
     //om13 transaction, Logging folder. You also could display the LCA logging events in the //om11 transaction.
2) "High : Log_WriterTaskSynchronizer::m_spinlock: collision rate 0.02%, 1 collisions,
       30000 spin loops, 66356 yield loops, 5704 accesses"
Log_WriterTaskSynchronizer class coordinates the suspend/resume of the Log_Writer .
      As SAP customer you have the option to create the SAP OSS ticket to the component 'BC-DB-LVC' and discuss the problems on your system in more details. We could login to your system via OSS to check the status of the system and problems with the writing log in liveCache.
Please use the DB Analyzer, liveCache tool, to find the bottleneck in liveCache.
         -> For SAP liveCache documentation please see the SAP note 767598.
         -> Please see the information & documents in the MAXDB Library at the link :
                 http://maxdb.sap.com/doc/7_7/default.htm
                 -> Tools Documentation -> Database Analyzer -> Database Analyzer Messages
Thank you and best regards, Natalia Khlopina

AcceptBacklog Error Message

Srikant:
I am doing a load test on Weblogic. I have already set
"weblogic.system.acceptBacklog=1000" in E:\weblogic\weblogic.properties. I
also set the same "weblogic.system.acceptBacklog=1000" using wlconfig
utility program. Then I started 10 threads, each hitting the same Weblogic
servlet 10 times. Weblogic is only able to handle 88 requests instead of
100. I repeated the same test a lot of times. Every time only 33 requests
are handled. If I start 100 threads, each hitting the same servlet 250
times, about 1500 requests are refused. And there is no error message at the
server whatsoever.
The acceptBacklog property does not seem to be set because I can not see it
in either the Weblogic console or at http://localhost/T3AdminProps
Can the problem be solved by setting acceptBacklog? Or is it some other
problem?
The following is the error messages:
java.net.ConnectException: Connection refused: no further information
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Compiled Code)
at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:125)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:112)
at java.net.Socket.<init>(Socket.java:269)
at java.net.Socket.<init>(Socket.java:98)
at sun.net.NetworkClient.doConnect(NetworkClient.java:54)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:320)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:409)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:260)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:270)
at sun.net.www.http.HttpClient.New(HttpClient.java:282)
at
sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:3
72)
at com.radicalmail.tracking.LoadTesterThread.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
java.net.ConnectException: Connection refused: no further information
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Compiled Code)
at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:125)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:112)
at java.net.Socket.<init>(Socket.java:269)
at java.net.Socket.<init>(Socket.java:98)
at sun.net.NetworkClient.doConnect(NetworkClient.java:54)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:320)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:409)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:260)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:270)
at sun.net.www.http.HttpClient.New(HttpClient.java:282)
at
sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:3
72)
at com.radicalmail.tracking.LoadTesterThread.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
java.net.ConnectException: Connection refused: no further information
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Compiled Code)
at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:125)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:112)
at java.net.Socket.<init>(Socket.java:269)
at java.net.Socket.<init>(Socket.java:98)
at sun.net.NetworkClient.doConnect(NetworkClient.java:54)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:320)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:409)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:260)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:270)
at sun.net.www.http.HttpClient.New(HttpClient.java:282)
at
sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:3
72)
at com.radicalmail.tracking.LoadTesterThread.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
Srikant Subramaniam <[email protected]> wrote in message
news:[email protected]...
The weblogic.properties file is the correct place to make the change. Canyou pl
post the exact error message that you are seeing?
Srikant.
Remington Li wrote:
Where should I set "weblogic.system.acceptBacklog" property? I am
running a
Weblogic server on 1 NT computer without multihoming. I see a lot
"connection refused" messages on my client. I am supposed to keepincreasing
"weblogic.system.acceptBacklog" by 25% until the error messagesdisappear.
But where should I set this property? I tried in the weblogic.properties
file. It did not help.
Remington

The client and server are on the same machine indeed. This answered my
question. So the bottleneck is at the client side, not at the server side.
Thanks a lot.
Rob Woollen <[email protected]> wrote in message
news:[email protected]...
If a client gets a connection refused message, you won't see an error
message on a server.
When a client initiates a TCP connection there is a 3-way handshake.Once
this handshake completes, the kernel pushes the socket on a queue for the
application program. The program calls accept to grab the connection.This
queue is of a fixed size. If the queue is full, he kernel will drop thesocket
and tell the client "connection refused". The server cannot print anerror
message because it never saw the connection.
Setting weblogic.system.acceptBacklog in the weblogic.properties file
should be sufficient.
Can you tell us some more about your hardware and your setup? Are you
running the client and the server on the same machine? If you are, Isuspect
that you will see much more realistic performance by placing the client ona
separate box.
-- Rob
Remington Li wrote:
Srikant:
I am doing a load test on Weblogic. I have already set
"weblogic.system.acceptBacklog=1000" in E:\weblogic\weblogic.properties.
I
also set the same "weblogic.system.acceptBacklog=1000" using wlconfig
utility program. Then I started 10 threads, each hitting the sameWeblogic
servlet 10 times. Weblogic is only able to handle 88 requests instead of
100. I repeated the same test a lot of times. Every time only 33requests
are handled. If I start 100 threads, each hitting the same servlet 250
times, about 1500 requests are refused. And there is no error message atthe
server whatsoever.
The acceptBacklog property does not seem to be set because I can not seeit
in either the Weblogic console or at http://localhost/T3AdminProps
Can the problem be solved by setting acceptBacklog? Or is it some other
problem?
The following is the error messages:
java.net.ConnectException: Connection refused: no further information
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Compiled Code)
at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:125)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:112)
at java.net.Socket.<init>(Socket.java:269)
at java.net.Socket.<init>(Socket.java:98)
at sun.net.NetworkClient.doConnect(NetworkClient.java:54)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:320)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:409)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:260)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:270)
at sun.net.www.http.HttpClient.New(HttpClient.java:282)
at
sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:3
72)
at com.radicalmail.tracking.LoadTesterThread.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
java.net.ConnectException: Connection refused: no further information
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Compiled Code)
at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:125)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:112)
at java.net.Socket.<init>(Socket.java:269)
at java.net.Socket.<init>(Socket.java:98)
at sun.net.NetworkClient.doConnect(NetworkClient.java:54)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:320)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:409)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:260)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:270)
at sun.net.www.http.HttpClient.New(HttpClient.java:282)
at
sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:3
72)
at com.radicalmail.tracking.LoadTesterThread.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
java.net.ConnectException: Connection refused: no further information
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Compiled Code)
at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:125)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:112)
at java.net.Socket.<init>(Socket.java:269)
at java.net.Socket.<init>(Socket.java:98)
at sun.net.NetworkClient.doConnect(NetworkClient.java:54)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:320)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:409)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:260)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:270)
at sun.net.www.http.HttpClient.New(HttpClient.java:282)
at
sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:3
72)
at com.radicalmail.tracking.LoadTesterThread.run(Compiled Code)
at java.lang.Thread.run(Thread.java:479)
Srikant Subramaniam <[email protected]> wrote in message
news:[email protected]...
The weblogic.properties file is the correct place to make the change.
Can
you pl
post the exact error message that you are seeing?
Srikant.
Remington Li wrote:
Where should I set "weblogic.system.acceptBacklog" property? I am
running a
Weblogic server on 1 NT computer without multihoming. I see a lot
"connection refused" messages on my client. I am supposed to keepincreasing
"weblogic.system.acceptBacklog" by 25% until the error messagesdisappear.
But where should I set this property? I tried in the
weblogic.properties
file. It did not help.
Remington

I need help with Capturing error message

I shot some DVNTSC footage in widescreen on my sony Handycam.
I set up my final capture presets to capture DVNTSC Anamorphic. When I try to capture I get an error message saying... Dropped frames were detected in my video footage.
Final cut gets all hung up and won't capture a thing.
Can anyone help me with this problem?
Thanks

What David is saying is that it's not recommended to capture to your internal drive. It's already running the OS and the software, trying to write video to it at the same time can often cause, imagine that, dropped frames.
The second setup you mention is also not recommended. USB hard drives transfer data in bursts, instead of firewire's stream. This can lead to, imagine that, dropped frames.
And finally, the firewire drive and camera attached to the same FW bus will essentially double the data rate needed, and is not recommended, as it will cause, imagine that, dropped frames.
The solution you should be looking for is a express/34 card with an external SATA attached to avoid the bottlenecks you are experiencing.

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error message into a Variable.

Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!

Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a®

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod Touch will no longer sync...error message.

For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone?

What is the exact wording of the error message?

Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive. The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache. There are 4 files in there that are taking up 124 GB! Can I simply delete these files or will it corrupt my regular files? I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

Yes, you can delete the cache files manually, Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches. Depending on your files, that can take a few minutes or several hours.
A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

Error message when installing Photoshop CS2 in Windows 8

I just upgraded to a computer with Windows 8. I use Photoshop CS2. I am getting the error message below when starting photoshop after installation. I changed program folders, but that did not work. Please advise.
Error: an error has been detected and activation cannot continue. Please restart your computer and reinstall application.

http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

Error message " bottleneck"

Similar Messages

Maybe you are looking for