Error Message BS039 ( No authorisation)

When the user status OPEN is set, the authorization object B_USERSTAT is tested with the following values:
Status schema TEST
Object type VBK
Authorization key
Activity 01
Hi,
I have created status profile and assigned with object Sales order. So while releasing i am getting this error message.How to solve this issue.

Hi,
As Mr. Laksmipaathi tols please check the note 651183.
The error is corrected with the next BBPCRM 2.0C Support Package 24.
If an upgrade to this SP is not possible, proceed as follows.
In the role maintenance (Transaction 'PFCG'), change the above roles by adding authorization object 'B_USERSTAT' with the activities '01' and '06' to all three roles.
If you are not familiar with this procedure, contact your SAP consulting or the SAP support.
This is the message given in the note. Contact your basis people for this.
Regards,
Madhu.

Similar Messages

  • Hi Have new laptop as last laptop died. Now can't sync and Cannot connect to Itunes to authorise. I get error message -9808

    Hi Have new laptop as last one comitted suicide. I have loaded Itunes onto new laptop but cannot sync my Ipod. When I try to authorise this laptop, I am unable to log into Itunes and receive error message -9808. Can any one help.
    Thanks

    This should help:
    iTunes Store: "An unknown error occured (-9808)"

  • I keep getting an error message when I try to sync my new iPhone5s to iTunes. It says my computer is not authorised. When I authorise it and try and sync again, the same error message appears. help?

    I keep getting an error message when I try to sync my new iPhone 5s to iTuines.
    It says my computer is not authorised.
    When I authorise it successfully, and try and sync again, the same error message appears.
    Help?

    Hello Chad176
    If you are constantly Authorizing your Apple ID, the article below will assist with getting that resolved for you.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT1539 I've burnt a digital copy of 3 blu ray dvds onto my iTunes, but i cant sync them to my iPad-an error message says device needs to be authorized, but its only authorised to this computer, i've never tried to use it on any other! Can anyone help?!

    I've burnt a digital copy of 3 blu ray dvds onto my iTunes, but i cant sync them to my iPad-an error message says device needs to be authorized, but its only authorised to this computer, i've never tried to use it on any other! Can anyone help?!

    Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
    To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
    So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it

  • Screen not HDCP authorised error message

    I have a brand new Retina 5k iMac but I can't get any iTunes Video to play. I got a screen not HDCP authorised error message. How do i fix this? Apple care seems unable to help at this point
    Thanks
    Andrew

    I know you"ve restarted the Sky box, but something else to try is switching off the power to everything and then powering on again, sometimes this fixes HDCP handshake issues.

  • Error message when I try to authorise  "E_ADEPT_IO" and "E_AUTH_BAD_DEVICE_KEY",

    Hi,  does anyone else get this message when trying to authorise ereader with ADE?
    "E_ADEPT_IO" and "E_AUTH_BAD_DEVICE_KEY",     

    I received the same error messages. I first had a Be Book which 'died' after only one day. I had successfully registered it. I now have another e-reader, IT Works. However, it does not work since I cannot register the reader. I entered the pasword but it came up with above-mentioned error messages. E-reader works fine with books that are free of cost. It is obviously a problem related to DRM which should be solved on Adobe's side. I have not yet found solutions for computers running with Windows.

  • I am trying to authorise my Kobo Glo on Adobe Digital Editions but get an error message

    The error message says "You can only authorise this computer with an Adobe ID that hasn't been previously used to authorise any other computer or mobile device.  Please try again.

    Please refer to Can't authorize with a previously used Adobe ID. Hope this solves your problem.

  • HT1420 Hi....I have brought a new classic ipod to download my all my purchases. Sadly when I link the ipod to the computer it gives me an error message stating that my computer needs to authorised. The computer is already 'authorised' & music is now missi

    Good morning
    Having had to buy a new ipod ( something wrong with the drive) I attempted to download all my purchases onto the new ipod.
    Then I get this error message saying I need to authorise the computer to retrieve some 100 tracks ....the computer has already been authorised and I am now finding half the albums missing. All tracks were previously downloaded onto old ipod and this computer.
    Checked icloud and all tracks downloaded....bit annoyed to be honest...  

    Also-I tried to use my backup hard drive, but I wasn't able to drag/transfer/send/move any of my muic files onto my iTouch when the iTouch was connected to my computer.  I can't figure out why it won't let me do that. 
    The only thing I can see when I open my iTouch on my computer is my file with photos.  I can't see videos, music, or anything else.  What's going on?

  • HT1420 iTunes Error message "This movie is authorised to play on another computer".

    Hi folks. I have bought a new PC and want to play a movie that i had previously rented from iTunes.
    After getting an authorisation error, I deauthorised all computers and then authorised the new one.
    But the movie won't play. Error message "authorised to play on another computer". Please help.

    This is part of the DRM for rented movies and isn't fixable.
    (77444)

  • Authorisation on my pc has been lost, when I try to reactivate I get the following error message  "code: E_AUTH_NOT_READY"  What can I do?

    For some reason I can not get into my ADE and get the error message "code:  E_AUTH_NOT_ READY      Digital Editions encountered an error on the activiation server.
    What can I do as it will not let transfer items to my Sony reader.  Thank you

    yes, I agree with what you say: the note '==> ...' is the solution to
    my problem, found it after some time in another thread  
         regards
         Von: sjpt <[email protected]>
         An: zwergenerv <[email protected]>
         Betreff: after updating ADE to version 2.0 I
    am getting the error message 'code E_AUTH_NOT_READY'
         Datum: Mon, 23 Sep 2013 10:59:41 +0200
    RE: AFTER UPDATING ADE TO VERSION 2.0 I AM GETTING THE ERROR MESSAGE
    'CODE E_AUTH_NOT_READY'
      created by sjpt in Adobe Digital Editions - View the full
    discussion

  • Error message when installing updates. "There was an error in the App store. Please try again later" (20)

    I've been trying to install recent updates for numbers, pages, and keynote, I get a message that says "There was an error in the App store. Please try again later." (20).  I tried several times over the last few days and continue to get the same error  message.
    Kat

    Thank you Catherine & MrToaster - Yes - I've just updated to my new credit card. All the details were correct, inc authorisation code but App Store kept prompting me to update iMovie then, not allowing me to (There was an error in the App Store. Please try again later. (20)).
    Your advice worked - I logged out and in again.
    The problem is that I'll definitely have forgotten your tip when my card next expires!

  • Error Message 11556 when trying to sign in to iTunes Store

    For the past week or so, when trying to sign in to the iTunes Store, I get an unknown error message (11556). I don't have any connectivity problems... I can connect to the internet without any problems... my iTunes opens the internet when I click on Apple Support. I can't find any information in the Apple Support other than to check my computer for connection problems. Help please!

    I had the same error code when trying to sort out Home Sharing on my Daughters iMac. The error turned out to be that my Daughters iMac was not authorised with my Apple Account (in iTunes go to Store / Authorise Computer). Also ensure that Parental Controls are not enables within the iTunes preferences.
    Hope this helps.

  • Itunes wont sync error message this computer is not authorized

    itunes will not sync my purchased songs to my new ipod touch, i get an error message that says, "some of the songs purchased cannot be transferred, this computer is not authorized, go to store, then authorize this computer."   I have done this over and over again, I have even deauthorized and then RE authorized again and again, I still get the same message. Can someone please please please HELP ME?

    I have been renting movies on my MBP and a previous MBP for years, and have always been able to transfer the rentals to an iPhone.  I always rent on the MBP and not the iPhone.  However due to a NEW authorisation problem recently I have not been able to play these movies through the Apple TV (V2) like I have been doing.  Others on the Internet have also started having this problem.  I have to resort to airplaying the movie from the MBP over to the Apple TV, which is a royal pain.  What's the point of having all this gear in the family room when I have to get up and go to the office and start the movie playing from there?!  Anyway, also recently I have not been able to move rented movies to the iPhone.  I have tried recursively chmodding the Shared folder as described here
    http://support.apple.com/kb/TS1277
    and it didn't help.
    So now, if we go on a long road trip or flight, we can't bring the rented movies on an iPhone/iPad.  This is a big problem.  No I am not going to bring the laptop on the trip.  The iTunes library is on an external disk on the LAN anyway.
    Re the country comments, I'm in Canada.

  • ERROR Message "UNABLE TO OPEN" and "E_IO_Cannot_Open"

    Trying to download 6 ebooks from Hive and I can download the acsm file but when I click that I get an error message "Unable To Open" and "E_IO_Cannot Open." The computer is authorised and uses Win 7 with ADE 3.  I tried ADE 4 but no better.  I have an older PC using Vista and ADE 2 and that will download okay but it is constantly being used so it is not convenient.  Does anybody know what's wrong?  Thanks.

    Hello,
    To try to help you, please, could you give some more informations ?
    - the operating system (XP/Vista), the edition ( Pro/Home...) and the service pack
    - usually, the installer installs the both files in C:\Program Files\Microsoft Sql Server\Samples. Is there any change in the location or have you moved the both files ?
    - could you check with the files explorer , that the 2 files are read-write and not read only( find one file, right-click on it, properties and in the 1st tabpage, you should see a checkbox read-only ( if checked , unchecke it ) ?
    - have you Sql Server Management Studio Express Edition ( at least SP1 ) ?
    If no, download it and use it to attach
    in the object explorer,
    click on your instance to expand it
    right click on databases
    in the contextual menu, click on attach
    in the new form,click on add
    you arrive on a second form : find your file , click on it, and OK
    it's the simplest way to attach ( the sp_-attach_db is complicated to type )
    the error messages are sometimes more clear in SSMSEE than in Sqlcmd
    Try also to attach ( thru SSMSEE or Sqlcmd but in using the windows authentification )
    NB: i hope that you are not trying to attach AdventureWorks on a remote instance and on a remote computer ( it would explain access denied )
    We are waiting for your feedback to try to help you more efficiently
    Have a nice day

  • How can I set up my Mac Pro so that my wife and I can use our separate iTunes accounts? I keep getting an error message that the computer is already associated with an Apple ID even though the two accounts are associated with separate log ins!

    I'm getting very confused with setting up multiple user accounts on my Mac Pro for my wife and I. We each have a separate iTunes account, and we want to keep our music libraries seaprate. I've set up two user accounts on the Mac Pro and I have my iTunes authorised and logged into my user account on my user account. Under my wifes user account (i.e. a separate log in on the computer) I'm trying to set up her iTunes account, but I can't download or play anything from the cloud - it just says "This computer is already associated with another iTunes Account" and tells me that if I 'transfer' then I won't be able to use the other one for 90 days! This is really annoying as my wife can't access music she has purchased on her iTunes account on the home machine. We're not trying to do anything dodgy, just access our music on our own accounts on separate log ins on the same machine. Does anyone have any suggestions? Thanks!

    Hi Allan, thanks for that. I've already set up a log in for my wife and that is all working fine. The problem is that when she logs in and opens iTunes and trys to associate her library with her iTunes account she gets the error message "This computer is already associated with another iTunes account". Whilst this is true, the computer is associated with my iTunes account under my separate log in, which should have nothing to do with hers. If she transfers the association to her account it will lock me out of my content on my log in for 90 days - I'm trying to work out how to associate each of the log in accounts with a separate iTunes account so we can access our music independently of one another without locking each other out. Hope that makes sense!

Maybe you are looking for

  • Applet Does Not Display

    Hi! With these two perplexing pieces of code, I should be able to show a red "Welcome to Java" string. But it doesn't render when I open the HTML file. I don't know why, I seem to be passing the parameters properly. Applet: <html>      <head>        

  • Itunes plus wont work with giftcard

    I bought a $100 gift card for the apple store a few months ago. Every time, starting yesterday, I want to buy a song, it tells me that I cannot make an Itunes plus purchase with this gift card and I am not authorized to do so. I am authorized, this i

  • Purchase Requisition restriction at Material Type level

    Hi MM Guru's as per Client requirment we want to restrict the Purchase Requisition creation at Material type level (i.e system should raise the error messege when we try to create the PR against Finished Goods) is that possible if yes how can we rest

  • Changing applet parameters with Javascript

    Is it possible to have an applet read a param value which has been changed with Javascript after the applet loads? I've tried changing the param value in this way, but the applet doesn't read the new value. It reads the default value in the HTML when

  • Delivery Date in Purchase Requisition

    Hello all, This could be a kind of familiar post but i need a clear cut advice on this particular aspect. Delivery date in a purchase requisition is calculated based on PDT in material or purchasing info record. Date proposed would exclude the non wo