Error message during tax report running

Dear Expert
when i am running report S_alr_87012357: advance return for tax on sales /purchases
at that time message is coming (In table A003, the entry JMOP V5 IN is missing) message no ff100
what could be the reason for this error how to solve this problem please clarify .
regards
nitin shukla

Hi,
It seems like condition record is missing. You can try transaction FV11 to create a condition record for condition type JMOP.
When you create condition record then insert country IN and Tax code V5
Regards,
Chintan Joshi.

Similar Messages

  • KI235 Error Message During F110 Payment Run.

    Dear Gurus,
    When we run transaction automatic payments F110, we get the message that our gain / loss in exchange rate account requires assignment to CO object. Error message "KI235".
    I did search on google and all forums, but am unable to find an answer.
    We are using New GL, and it's a requirement to split the foreign exchange to different cost centers. Because of this, we are not able to fix it to one cost center, but to let the system determine the cost center via OKB9 from the Profit center used.
    OKB9 has been set up properly with respective Profit Centers mapped to Cost Centers. However, during payment run, whenever there are multiple profit centers involved, system aren't able to derive cost center. We have no issue when document has only on Profit Center.
    Can anyone help me in this issue?
    Thanks.
    Regards

    Foreign exchange gain loss account is a P&L account which will ask for a cost center/object if this acount is created as a cost element n your system. There are two options.
    1. Don't create Forex gain/loss account account as a cost element. If you do this this account will never ask for a cost object.
    2. If this account is already created as a cost element then you need to default the cost center for this GL Account in OKB9.
    I hope this should work.

  • Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.

    Hi All
    We are creating POs from interface program "Import Standard Purchase Order Program". Only for few of the POs, we are encountering the error 'Warning: An error occurred during tax calculation
    . Please correct the problem or contact your system administrator.'
    This error is happening for few PO's, other POs with same vendor, ship to and bill to location created successfully by the program
    Any inputs on how to resolve this error is greatly appreciated.
    Regards,
    Brajesh

    Hi Hussein,
    Thank for the prompt response.
    We have already applied the patch related to doc 1272684.1.
    Below are the environment detail.
    Database: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    Application : 12.1.3
    Diagnostic tool output :-
    INTERFACE_
    TRANSACTION_ID
    INTERFACE_TYPE
    COLUMN_NAME
    PROCESSING_DATE
    TABLE_NAME
    ERROR_MESSAGE_NAME
    ERROR_MESSAGE
    100148
    PO_DOCS_OPEN_INTERFACE
    09-Aug-2013
    PO_HEADERS_INTERFACE
    PO_PDOI_TAX_CALCULATION_ERR
    Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.
    Log file :-
    +---------------------------------------------------------------------------+
    Purchasing: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    POXPOPDOI module: Import Standard Purchase Orders
    +---------------------------------------------------------------------------+
    Current system time is 09-AUG-2013 21:09:04
    +---------------------------------------------------------------------------+
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    STANDARD
    N
    INCOMPLETE
    12805
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
    AUDSID = 12076063
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    69
    +------------- 1) PRINT   -------------+
    Printing output file.
                   Request ID : 55116524
             Number of copies : 0
                      Printer : noprint
    +--------------------------------------+
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed successfully
    Current system time is 09-AUG-2013 22:27:42
    +---------------------------------------------------------------------------+
    Brajesh

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • Error Message During Vista Install W/ Bootcamp

    I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
    Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
    I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
    Please HELP! I need my vista installation up and running for work!

    "but when detecting hard drives, nothing shows up in the list."
    I don't really understand that statement as without any drives showing up how were you able to even start the install?
    At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time.

  • Error message during cube creation

    Hi expert,
    System show the following error message during cube creation, please info how to solve this problem. Thanks.
    Define the characteristics of the validity table for non-cumulatives
    Message no. R7846
    Diagnosis
    The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
    The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
    Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
    Examples of such characteristics are:
    A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
    the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
    Procedure
    Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
    In the example above, the characteristics "plan/actual" and  "plant" must be selected.
    The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

    Hi,
    Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

  • Error occurred during CTM planning run

    Hi folks,
    Appreciate your co-operations!
    I am facing the problem while running the CTM with the profile DEMO2.
    CTM Planning Run gives one error and alert.
    Error: Error occurred during CTM planning run
    Technical Data
    Message type__________ A (Cancel)
    Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
    Message number________ 401
    Problem class_________ 1 (very important)
    Number________________ 1
    Environment Information
    CTM Action____________ G
    Message type__________ A
    Alert: Internal error has occurred (<!> Segmentation fault)
    Technical Data
    Message type__________ E (Error)
    Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
    Message number________ 571
    Message variable 1____ <!> Segmentation fault
    Number________________ 1
    Environment Information
    CTM Action____________ G
    Message type__________ C
    Log file display
    <i> 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
    Args:
    m0001006
    sapgw04
    28812935
    IDX=1
    <i> 04:37:59 optsvr_main.cpp(645) 'SuperVisor'  * SAP APO CTM Engine [CTM/ctmsvr]
    <i> 04:37:59 optsvr_main.cpp(646) 'SuperVisor'  * Copyright u00A9 SAP AG 1993-2009
    <i> 04:37:59 optsvr_main.cpp(647) 'SuperVisor'  *
    <i> 04:37:59 optsvr_main.cpp(648) 'SuperVisor'  * Version        : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
    <i> 04:37:59 optsvr_main.cpp(649) 'SuperVisor'  * Platform       : ntamd64/x64
    <i> 04:37:59 optsvr_main.cpp(650) 'SuperVisor'  * Interface      : 2.0
    <i> 04:37:59 optsvr_main.cpp(651) 'SuperVisor'  * Build date     : Nov 25 2009 22:59:47 [1259186387]
    <i> 04:37:59 optsvr_main.cpp(652) 'SuperVisor'  * Build machine  : PWDFM163
    <i> 04:37:59 optsvr_main.cpp(653) 'SuperVisor'  * Latest change  : 407661
    <i> 04:37:59 optsvr_main.cpp(654) 'SuperVisor'  * NW release     : 7100.0.3300.0
    <i> 04:37:59 optsvr_main.cpp(655) 'SuperVisor'  * Perforce branch: 7.0_REL
    <i> 04:37:59 optsvr_main.cpp(656) 'SuperVisor'  *
    <i> 04:37:59 optsvr_main.cpp(676) 'SuperVisor'  * Hostname       : m0001006
    <i> 04:37:59 optsvr_main.cpp(677) 'SuperVisor'  * OS version     : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
    <i> 04:37:59 optsvr_main.cpp(678) 'SuperVisor'  * PID            : 6768
    <i> 04:37:59 optsvr_main.cpp(683) 'SuperVisor'  * CWD            : D:\usr\sap\SC6\DVEBMGS04\log
    <i> 04:37:59 optsvr_main.cpp(684) 'SuperVisor'  *
    <i> 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
    <i> 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
    <i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
    <i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' *   physical memory: 10238 MB total, 6511 MB available [63% free]
    <i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' *   page file      : 73212 MB total, 60889 MB available [83% free]
    <i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' *   virtual memory : 8388607 MB total, 8388499 MB available [99% free]
    <i> 04:37:59 optsvr_main.cpp(693) 'SuperVisor'  *
    <i> 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
    <i> 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
    <i> 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
    <i> 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
    <i> 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
    <i> 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
    <i> 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
    <i> 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
    <i> 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
    <i> 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
    <i> 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
    Sender/Receiver RFC_HANDLE#1:
    <RFC> * RFC connection attributes:
      Own Host    : m0001006
      Partner Host: m0001006
      Destination : OPTSERVER_CTM01
      Program Name: SAPLRCC_COMM_ENGINE
      SystemNr    :              04       SystemId    : SC6
      Client      :             700       User        : MBATCHA    
      Language    :               E       ISO Language: EN
      CodePage    :            1100       Partner CP  : 1100
      Kernel Rel. :            701        Partner Rel.: 701
      Own Release :            711        CPIC ConvId : 28812935
      Own Type    :               E       PartnerType : 3
      Trace       :                       RFC Role    : S
    <RFC> * RFC statistic information:
      number of calls        : 7
      number of received data: 10569
      number of sent data    : 1349
      overall reading time   : 9073
      overall writing time   : 162
    <i> 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
    <i> 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
    ***************************** OPTSVR - OPTIONS ***************************** *
    [CTM_PROFILE]
    nCTMENGINEPACKAGESIZE = 500
    sCOMPONENT = SCM
    sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
    sCTMLOGFLAG = 0
    sCTMPROFILE = DEMO2
    sRELEASE = 700
    [general]
    bUNICODE = true
    nSLOT_MAXIMUM = 1
    nSLOT_MINIMUM = 1
    nSLOT_RESERVED = 1
    sAPO_RELEASE = 700
    sAPPLICATION = CTM
    sExeDir = d:\apoopt\ctm\bin
    sExeName = ctmsvr.exe
    sHOST = m0001006
    sInvokeMode = invoke
    sLANGU = E
    sMANDT = 700
    sPRODUCT_NAME = APO
    sPRODUCT_PATCHLEVEL = 0001
    sPRODUCT_RELEASE = 700
    sPROFILE = DEMO2
    sSESSION = tju5Bmz21}6WVG0Sn6pv3W
    sSYSTEM = SC6
    sUNAME = MBATCHA
    [init]
    sSECTION0001 = INIT
    sSECTION0002 = GENERAL
    sSECTION0003 = PASSPORT
    sSECTION0004 = CTM_PROFILE
    [PASSPORT]
    bIS_REMOTE = false
    nACTION_TYPE = 1
    nSERVICE = 1
    sACTION = /SAPAPO/CTMB
    sPRE_SYSID = SC6
    sSYSID = SC6
    sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
    sUSERID = MBATCHA
    ************************** OPTSVR OPTIONS - END **************************** *
    <i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
    <i> 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
    <i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
    <i> 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
    <i> 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
    <i> 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
    <i> 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
    <i> 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
    logfile reopened : Tue Dec 01 04:37:59 2009
    logfile name     : ctm.DEMO2.20091201_043759_1a70.log
    <i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
    <i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
    <i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
    <i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
    <i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
    <i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
    <i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
    <i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
    <i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
    <i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
    <i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
    <i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
    <i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
    <i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
    <i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
    <i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
    <i> 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
    <i> 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
    <i> 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
    <i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
    <i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
    <i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
    <i> 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
    <i> 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
    <i> 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
    <i> 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
    <i> 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
    <i> 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
    <i> 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
    <i> 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
    <i> 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
    <i> 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
    <i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
    <i> 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
    <i> 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
    <i> 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
    <i> 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
    <i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
    <i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
    <i> 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
    <i> 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
    <e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
    <i> 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
    <i> 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
    [CHECK_EQUAL]
    [CHECK_UPPERBOUND]
    nPEAK_MEMORY_NTAMD64 = 45344
    [CHECK_LOWERBOUND]
    <i> 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
    bSuccess     false
    nCPU_TIME     0
    nPEAK_MEMORY     45344
    nPEAK_VIRTUAL_BYTES     141844
    nREAL_TIME     6
    tracefile     ctm.DEMO2.20091201_043759_1a70.log
    <i> 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
    ENGINE_VERSION     7.0_REL SP05, 407661, Nov 25 2009 22:59:47
    nCPU_TIME     0
    nHD_FREESPACE     190433
    nPEAK_MEMORY     45344
    nPEAK_VIRTUAL_BYTES     141844
    nREAL_TIME     6
    <i> 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
    <i> 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
    Finished->FAILED ...
    <i> 04:38:05 core_memmgr.cpp(564) 'MsgMgr'   transferring memory of heap 6912 to main heap
    <i> 04:38:05 core_memmgr.cpp(606) 'MsgMgr'   finished transfer of heap 6912
    <i> 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
    Sender/Receiver RFC_HANDLE#1:
    <RFC> * RFC connection attributes:
      Own Host    : m0001006
      Partner Host: m0001006
      Destination : OPTSERVER_CTM01
      Program Name: SAPLRCC_COMM_ENGINE
      SystemNr    :              04       SystemId    : SC6
      Client      :             700       User        : MBATCHA    
      Language    :               E       ISO Language: EN
      CodePage    :            1100       Partner CP  : 1100
      Kernel Rel. :            701        Partner Rel.: 701
      Own Release :            711        CPIC ConvId : 28812935
      Own Type    :               E       PartnerType : 3
      Trace       :                       RFC Role    : S
    <RFC> * RFC statistic information:
      number of calls        : 116
      number of received data: 420457
      number of sent data    : 39262
      overall reading time   : 5.30093e+006
      overall writing time   : 3831
    <i> 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
    OptimizeServer says  GOOD BYE
    Please help me to resolve this issue.
    Thanks & Regards,
    Khadar

    Hi Khadar,
    1) The information you have provided is the CTM optimiser log.
    Run the job in background and in  sm37 and click on job log &
    analyse the exact error happened.  In case if you are not able
    to do, please provide the error log.
    2) Check the livecache is stable in its operations when the job
    runs (check with basis team)
    3) Run consistency check for master data before CTM run
    4) Check for any struck queues and clear those and rerun
    5) If you feel more inconsistencies in system, run livecache
    consistency and rerun CTM run
    Regards
    R. Senthil Mareeswaran.

  • An error occurred during local report processing.The definition of the report '' is invalid.The definition of this report is not valid or supported by this version of Reporting Services. he report definition may have been created with a later version of R

    Hi,
    I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
    ' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
      m_fields = NewArrayList()
      Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
          m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
      Next i
      'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
      stream = File.OpenWrite("D:\MyTestReport2.rdlc")
      Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
      ' Causes child elements to be indented
      writer.Formatting = Formatting.Indented
      ' Report element
      writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
      writer.WriteStartElement("Report")
      writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
      writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
      writer.WriteStartElement("ReportSections")
      writer.WriteStartElement("ReportSection")
      writer.WriteElementString("Width", "11in")
      writer.WriteStartElement("Body")
      writer.WriteElementString("Height", "5in")
      writer.WriteStartElement("ReportItems")
      writer.WriteStartElement("Tablix")
      writer.WriteAttributeString("Name", Nothing, "Tablix1")
      writer.WriteElementString("Top", ".5in")
      writer.WriteElementString("Left", ".5in")
      writer.WriteElementString("Height", ".5in")
      writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
      writer.WriteStartElement("TablixBody")
      ' Tablix Columns
      writer.WriteStartElement("TablixColumns")
      ForEach fieldName In m_fields
          writer.WriteStartElement("TablixColumn")
          writer.WriteElementString("Width", "1.5in")
          writer.WriteEndElement() ' TableColumnNext fieldName
      writer.WriteEndElement() ' TablixColumns' Header Row
      writer.WriteStartElement("TablixRows")
      writer.WriteStartElement("TablixRow")
      writer.WriteElementString("Height", ".25in")
      writer.WriteStartElement("TablixCells")
      ForEach fieldName In m_fields
          writer.WriteStartElement("TablixCell")
          writer.WriteStartElement("CellContents")
          writer.WriteStartElement("Textbox")
          writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
          ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
          writer.WriteStartElement("Paragraphs")
          writer.WriteStartElement("Paragraph")
          writer.WriteStartElement("TextRuns")
          writer.WriteStartElement("TextRun")
          writer.WriteElementString("Value", fieldName)
          writer.WriteStartElement("Style")
          writer.WriteElementString("TextDecoration", "Underline")
          writer.WriteElementString("PaddingTop", "0in")
          writer.WriteElementString("PaddingLeft", "0in")
          writer.WriteElementString("LineHeight", ".5in")
          ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
          writer.WriteEndElement() ' Style
          writer.WriteEndElement() ' TextRun
          writer.WriteEndElement() ' TextRuns
          writer.WriteEndElement() ' Paragraph
          writer.WriteEndElement() ' Paragraphs
          writer.WriteEndElement() ' TexBox
          writer.WriteEndElement() ' CellContents
          writer.WriteEndElement() ' TablixCellNext
      writer.WriteEndElement() ' TablixCells
      writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
      writer.WriteStartElement("TablixRow")
      writer.WriteElementString("Height", ".25in")
      writer.WriteStartElement("TablixCells")
      ForEach fieldName In m_fields
          writer.WriteStartElement("TablixCell")
          writer.WriteStartElement("CellContents")
          writer.WriteStartElement("Textbox")
          writer.WriteAttributeString("Name", Nothing, fieldName)
          '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
          writer.WriteStartElement("Paragraphs")
          writer.WriteStartElement("Paragraph")
          writer.WriteStartElement("TextRuns")
          writer.WriteStartElement("TextRun")
          'writer.WriteElementString("Value", fieldName)
          writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
          writer.WriteStartElement("Style")
          writer.WriteElementString("TextDecoration", "Underline")
          writer.WriteElementString("PaddingTop", "0in")
          writer.WriteElementString("PaddingLeft", "0in")
          writer.WriteElementString("LineHeight", ".5in")
          ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
          writer.WriteEndElement() ' Style
          writer.WriteEndElement() ' TextRun
          writer.WriteEndElement() ' TextRuns
          writer.WriteEndElement() ' Paragraph
          writer.WriteEndElement() ' Paragraphs
          writer.WriteEndElement() ' TexBox
          writer.WriteEndElement() ' CellContents
          writer.WriteEndElement() ' TablixCellNext
      writer.WriteEndElement() ' TablixCells
      writer.WriteEndElement() ' TablixRow
      writer.WriteEndElement() ' TablixRows'End of Details Rows
      writer.WriteEndElement() ' TablixBody
      writer.WriteStartElement("TablixRowHierarchy")
      writer.WriteStartElement("TablixMembers")
      writer.WriteStartElement("TablixMember")
      ' Group
      writer.WriteElementString("KeepWithGroup", "After")
      writer.WriteEndElement() ' TablixMember' Detail Group
      writer.WriteStartElement("TablixMember")
      writer.WriteStartElement("Group")
      writer.WriteAttributeString("Name", Nothing, "Details")
      writer.WriteEndElement() ' Group
      writer.WriteEndElement() ' TablixMember
      writer.WriteEndElement() ' TablixMembers
      writer.WriteEndElement() ' TablixRowHierarchy
      writer.WriteStartElement("TablixColumnHierarchy")
      writer.WriteStartElement("TablixMembers")
      'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
          writer.WriteStartElement("TablixMember")
          writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
      writer.WriteEndElement() ' TablixMembers
      writer.WriteEndElement() ' TablixColumnHierarchy
      writer.WriteElementString("DataSetName", "tbdataset")
      writer.WriteEndElement() ' Tablix
      writer.WriteEndElement() ' ReportItems
      writer.WriteEndElement() ' Body
      writer.WriteStartElement("Page")
      ' Page Header Element
      writer.WriteStartElement("PageHeader")
      writer.WriteElementString("Height", "1.40cm")
      writer.WriteStartElement("ReportItems")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Textbox1")
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", Nothing, "ABC CHS.")
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TextBox
      writer.WriteEndElement() ' ReportItems
      writer.WriteEndElement() ' PageHeader
      writer.WriteEndElement() ' Page
      writer.WriteEndElement() ' ReportSection
      writer.WriteEndElement() ' ReportSections' DataSources
      writer.WriteStartElement("DataSources")
      writer.WriteStartElement("DataSource")
      writer.WriteAttributeString("Name", Nothing, "tbdata")
      writer.WriteStartElement("DataSourceReference")
      writer.WriteEndElement() ' DataSourceReference
      writer.WriteEndElement() ' DataSource
      writer.WriteEndElement() ' DataSources'DataSet
      writer.WriteStartElement("DataSets")
      writer.WriteStartElement("DataSet")
      writer.WriteAttributeString("Name", Nothing, "tbdataset")
      writer.WriteStartElement("Query")
      writer.WriteElementString("DataSourceName", Nothing, "tbdata")
      'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
      writer.WriteElementString("CommandText", Nothing, "TableDirect")
      writer.WriteEndElement() ' Query'Fields
      writer.WriteStartElement("Fields")
      ForEach fieldName In m_fields
          writer.WriteStartElement("Field")
          writer.WriteAttributeString("Name", Nothing, fieldName)
          writer.WriteElementString("DataField", fieldName)
          writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
          writer.WriteEndElement() ' FieldNext
      writer.WriteEndElement() ' Fields' rd datasetinfo
      writer.WriteEndElement() ' DataSet
      writer.WriteEndElement() ' DataSets
      writer.WriteEndElement() ' Report' Flush the writer and close the stream
      writer.Flush()
      stream.Close()
      'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
      Dim ms AsNewMemoryStream(myByteArray)
      'Supply Stream to ReportViewer
      ReportViewer1.LocalReport.LoadReportDefinition(ms)
      ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
    An error occurred during local report processing.
    The definition of the report '' is invalid.
    The definition of this report is not valid or supported by this version of Reporting Services.
    The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
    Details: Data at the root level is invalid. Line 1, position 1.
    Can anybody guide me?

    Hi Wendy Fu,
    Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
    options flashed.
    The definition of this report is not valid or supported by this version of Reporting Services.
    The report definition may have been created with a later version of Reporting Services
    or contain content that is not well-formed or not valid based on Reporting Services schemas
    Details: Data at the root level is invalid
    My web config has following references
    <add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
    <add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
    May be I have to change these versions to 9 or 10.
    First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
    Once thanks for your reply.
    Races

  • Error message while trying to run combo update

    I get the following error message when trying to run the combo update.
    "You cannot install Mac OS X Update Combined on this volume. This volume does not meet the requirements for this update."
    I tried with both 10.5.7 and 10.5.8 and I get the same message.
    Any suggestions?

    1. Be sure you have downloaded the 10.5.8 Combo Installer.
    2. Verify that you have 10.5.x installed by opening About this Mac from the Apple menu. The installed version should be displayed.
    3. Do the following:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • [Solved] 'New' error messages during init after updating initscripts

    After updating to the latest initscripts, I got some error messages during init that I hadn't seen before.  They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled.  The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
    In any case, I downgraded and found that the errors were nothing new.  I'm just curious if the appearance of the errors during init was by design or a happy accident.
    Last edited by alphaniner (2011-08-01 17:07:30)

    alphaniner wrote:
    karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
    http://projects.archlinux.org/initscrip … 328fbaf2e7
    http://projects.archlinux.org/initscrip … 42dfeca8c2
    I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
    You need to reboot.
    After you do, run
    tail /var/log/boot
    Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
    [karol@black ~]$ tail /var/log/boot
    Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
    Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

  • Missing MSVCR71.dll Error Message During Launch

    I just wanted to pass along an error message that I have found the solution to and have passed onto Adobe through the bug submission process.
    I have discovered a QuickTime Component that causes Adobe Encore CS5 to give an error message during launch.  The Error message states “The file MSVCR71.dll could not be found. Please reinstall Adobe Encore to resolve the problem” (Well, it is something really close to that.  I did not write down the error message before fixing the problem).  There is an “OK” button below the message to continue loading Adobe Encore.
    The error message is only displayed if all other CS5 programs are closed.  During my findings, I discovered that if you open Adobe Encore CS5 through Premiere Pro CS5 or After Effects CS5 by using Dynamic Link, the error message will not be displayed.
    The QuickTime Component that causes the error message is “XiphQT”, which is used to play Xiph formats in any QuickTime based application.  The Component can be located here: http://www.xiph.org/quicktime/
    When installing the latest version of the program “Juicer” from digital juice, the QuickTime Component is installed.  Juicer will run without the Component, but gives a message that it is missing.  I have removed the Component since I use Encore to a much greater extent.
    To remove the XiphQT Component from QuickTime, you must remove it manually because when QuickTime is uninstalled, the Component is left behind and will be a part of future installations of QuickTime.
    While the error message displayed during the launch of Adobe Encore CS5 is not detrimental, it can be frustrating, so I hope this may help others that receive the error message from above.  I should also note that I am using Windows 7 Home Premium.

    Greetings,
    My solution was attributable to my firewall (Microsoft Defender) blocking TCP connections to QuckTime.  Here's the steps that resolved my problems on CS5, Windows 7, 64 bit:
    Control Panel
    Windows Firewall
    Advanced Settings
    Outbound Rules
    New Rule...
    Program/Next
    This program path:  (use Windows Explorer to search)
    c:\Program Files (x86)\Adobe\Adobe Bridge CS5\msvcr71.dll
    Allow the connection
    (Leave checks Domain, Private, Public)/Next
    Name Description: (whatever you like - will display at top of Windows Firewall Advanced Security Outbound Rules)
    Good luck,  Michael

  • Error Message "Itunes can not run...."

    Hi there. I know I've seen this topic but not sure of the answer. I was asked to upgrade QuickTime and Itunes so I said yes. Since then, when I click on ITunes is says,"Itunes cannot run because some of its required files are missing. Please reinstall Itunes." My daughter is afraid that all of her IPod music, etc. are gone. Please help.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Error message during update adobe reader

    error message during update of Adobe reader
    not sufficient rights to change C:\program files\common files\...AcroIEHelper.dll

    How do you update?
    Are you running the update as an Administrator user?
    Is Internet Explorer closed during the update?

  • Dropped Frame Error Message During Playback in Snow Leopard

    I have FCE 4.0.1 and I just recently upgraded to 10.6.1 and now I keep getting these error messages during playback saying Dropped Frames. Its telling me to try lowering my audio playback quality, increase my ram, etc.. Before I upgraded to Snow Leopard I never got these errors. I have a 8 core Mac Pro with more than enough ram and hard drive space and again this wasn't happening until I upgraded. Can someone assist and tell me why this is happening and what can fix this issue.

    You can try trashing your preferences and rebooting and repairing permissions and running Disk Utility, the usual maintenance suggestions, but I think the real issue is the OS and software installation, and the only way to fix that is to redo it.

  • Display Error Message in BW Report based on Customer Exit Variable

    Hi
    I need to display an error message in the BW report based on the value of a customer exit variable - i was able to do this successfully in BW3.5 using the below code.
      WHEN 'ZUPN'. "Here ZUPN is the customer exit variable
        IF i_step = 1.
          <check for condition -- if successful, variable flag = 1, else variable flag = 0>
          IF flag = 0.
            MESSAGE e157(00). "Error Message
          ENDIF.
        ENDIF.
    I have upgraded my system to BI 7.0 now. Whenever the variable check is not successful, it displays a blank screen instead of the error message in the report. Please advice if we need to change the code and how ??

    Bhanu,
      Thanks for u r reply.This warning message appears every time i execute the report through portal.
    Any idea ?
    Regards
    Mano

Maybe you are looking for