Error Message:  Element TNG_PREFERED_IMAGE_LIB is undefined in REQUEST.

This is occurring when I try to use the Upload Image server behavior in ADDT. I have used this server behavior so many times and have never seen this error message before. Does anyone have any ideas?

Jerbear85 wrote:
I am getting the same message while trying to insert data from a cfform to a database. The textboxes are named and id'd in the form.cfm, is there somewhere else the textbox names need to be defined like a code behind page or maybe even on the same .cfm?
No, ColdFusion has no "code behind" concept.  You define a form by building a html form.  If there is a html form input element named "template" and it is submitted it will exist in the "form" structure for the coresonding action cfml template.
There are some well known gotchas here.  Radio and checkbox controls are only created if they are selected otherwise they do not exist.
A form method of "get" populates the URL scope, a form method of "post" populates the FORM scope.
These scopes only get populated on the immediate request from the submit action.  Anything that causes the code to move to a new request such as <cflocation...> will not carry the URL or FORM data with it.

Similar Messages

  • Need help with error message-Element SENDERBUSINESSNAME is undefined in MSG

    Hi,
    I am brand new to ColdFusion and am using a pre-built form for a contact form on a client's site.  I added the additional field business name and must have missed something - any ideas on where I would need to define the element would be appreciated.
    Thanks
    Maggie

    Troubleshooting technique number 1 - look at your data.  In this case, either msg doesn't exist, or it doesn't contain anything named senderbusinessname.  Run the following line somewhere before the error occurs.
    <cfdump var="#msg#">

  • I bought a Mac Book Pro retina display, Serial Number  C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

    I bought a Mac Book Pro retina display, Serial Number  C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
    Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
    Sincerely
    Asrat Kahsay
    N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
    <Edited by Host>

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    The OS X Mt Lion up-to-date program;
    http://www.apple.com/osx/uptodate/

  • When I view email on my iPad, I get an error message saying "unable to process your request" . How do I correct this?

    When I access my iPad email, I get an error message saying "unable to process your request"  How do I correct this?

    Start with the basics. Force close mail and reset your iPad.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that doesn't help, you might want to consider resetting your router by unplugging it from power for about 30 seconds. That can help at times even if all of your other devices are connecting to the Internet. I suggest this, because the message that you are getting may be due to a bad connection to the Internet.

  • I keep receiving the error message "Cannot complete your iTunes store request. Ref#4002"

    I keep receiving the following error message "Cannot complete your iTunes store request. Reference #4002.  It happens 98% of the time when I try to add a song to the cloud.  Any ideas as to how to fix this?

    Okay, do as the complete message states and contact iTunes customer support.
    No one in these user to user support forums can assist with account issues.

  • I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:  Cannot complete i Tunes Store request. A required iTunes com

    I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
    Cannot complete  iTunes Store request. A required iTunes component is not installed (-42404)
    Please help.

    Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore.  I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere?  Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

  • Error message: The scn engine received a request fro an I/O driver which is not currently installed on the controller.

    Hi,
    I am currently working in a new application with a cRIO system and I am having some issues when try to run a VI. My actuall configured hardware is as follow:
    -cRIO-9113 4 slot chassis
    In this chassis I have installed 3 NI 9514 servo interface modules in slot 1, 2 and 3
    -cRIO-9022 Real-Time Controller
    -NI 9144 8 slot expansion chassis
    In this chassis I have installed:
    -Slot 1: NI 9213 (16ch thermocouple inputs module)
    -Slot 2: NI 9201 (8ch ±10 V analog input module)
    -Slot 3: NI 9263 (4ch ±10 V analog output module)
    -Slot 4: NI 9426 (32ch sourcing digital input module)
    -Slot 5: NI 9426 (32ch sinking digital input module)
    -Slot 6: NI 9476 (32ch sourcing digital output module)
    In the controller I have installed the following softwares:
     -IndCom for EtherCAT Scan Engine Support 1.2.0
    -LabVIEW NI SoftMotion Module 9.0.0
    -LabVIEW NI SoftMotion Module Scan Engine Support 9.0.0
    -LabVIEW Real-Time 9.0.1
    -LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
    -Web Server for LabVIEW RT 2.0.0
    -Language Support for LabVIEW RT 1.0.0.3
    -NI Scan Engine 1.1.0
    -NI Scan Engine Advance I/O Access 1.1
    -NI-Motion 8.0.0
    -NI-RIO 3.4.0
    -NI-RIO IO Scan 1.4
    -NI-VISA 4.6
    -NI-VISA Server 4.6
    Well, I made  VI to test my inputs and outputs, and the problem that I am having is that when I try tu run the VI, in the deployment window I get an error message that read: The scan engine received a request for an I/O driver which is not currently installed on the controller.
    Apparently there is another driver that I need to instal in the controller, but I have no idea of what driver could be. If someone have any idea of what this problem could be, I really will appreciate your help.
    Ferdinand Martinez
    FMO Automation LLC

    Hi nausfaratu,
    Can you elaborate a little further? What are you doing in your VI? Are you getting this error when you build it into a Real-Time Application (EXE) or when you just run it from the development environment? Is that the recommended set of software or did you do a custom software install on the controller?
    Aaron P
    National Instruments
    Applications Engineer
    http://www.ni.com/support 

  • Get error message: "Element 'when' not found in 'xsl:choose'"

    Thank you in advance for your help.
    I got this error message:
    Caused by: oracle.xdo.parser.v2.XMLParseException: Element 'when' not found in 'xsl:choose'.
    When I put a form field with this help text:
    <?CHOOSE:?><?WHEN:ELMT_CATEGORY_CODE='SS'?>
    Did some research but cannot find why...
    -Bill

    Never mind, put the <?end choose?> in wrong position. Thanks

  • Error message VF 217 when creating downpayment request in VF01

    Dear Experts,
    We use milestone billing. I did all the necessary settings in customizing.
    Here is an example for a billing plan
    billing date    date description   billing rule   date category billing type
    28.02.2010  0009                      5                 04                   FAZ
    28.03.2010  0008                      3                 02
    When I create a FAZ (downpayment request) in VF01 or VF04, SAP says "check the log" . In the log I get the error message VF 217 "For downpayment requirements, only billing rule 4 or 5 can be used". If I check the item data of e.g. item 10 the billing rule is indeed "5". So I wonder, why I get this error message in the first place. Do you have any idea, how I can supress this error message?
    If I create the FAZ manually via VF01/VF04, I get this message, but I can still save and process the FAZ without any problems.
    But we need to create the FAZ via the POS interface (Retail). So when the interface gets this error message, it actually thinks that the FAZ can't be created. This is causing us problems. Therefore we need to supress the error message.
    Thanks a lot in advance!

    Hi Mueller,
    I think in that case the problem is in billing rule in billing plan type.
    Goto OVBJ--> select billing plan type (For ex. 01 - Milestone Billing) --> Please maintain billing rule 4 or 5 --> save it.
    In downpayment
    Option 4, We use for % based,
    Option 5, We use for value basis
    After doing thi change, I think your issue will get resolved.
    Please try and revert back with your findings.
    Regards,
    MT
    Edited by: M T on Feb 28, 2010 9:11 PM

  • Error message elements organizer 13

    I receive an error message stating elements organizer 13 has stopped working. How do I fix this?

    Finally found a representative that fixed my problem here's what to do for Windows 8
    1. Launch Elements Organizer
    2. Click on Help > System Info
    3. In system Info Dialog,you will see a Current Catalog category.
    4. Copy the location mentioned adjacent to Catalog Location.
    5. Now press (windows +R) buttons to open the Run Dialog and paste the location you copied
    6. This will open the folder containing your catalog.
    7. Search for 'thumb5.cache' entry there and rename it to thumb5_old.cache
    8. Now, relaunch Organizer and wait for some time. If the files are heavy, EO will take some time in generating thumbnails.
    Please let me know if it does not help.
    Thanks,
    Anwesha
    She also had a fix for Windows 7
    This page lists the measures you can take to solve hourglass thumbnail issue you are facing.
    Please give this a try.
    Thanks,
    Anwesha
    Thank you Anwesha - it was a very frustrating weekend - you just made a great start to my week.
    Elise

  • Watch Folder Returned an error message(Elements 10)

    I recently upgraded from elements 8 to version 10, and am having nothing but trouble in one area. When I start Elements, the box will come up saying "updating", and will take sometimes 18 hours to go to 100%, even if there have been no photos to add. Whe it gets to 100%, I get this message:  "The watch folder service returned and error: Message format, Invalid Tag Id"
    Has anyone heard of this? Should I reinstall elements and start over? The program is basically unusable. I'm stumped and normally very good at this. I'm running a fast desktop, windows 7, etc. Please help!

    Hi,
    I'm not sure which step solved the issue however I run a security software on my Mac so I disabled that completely.
    Then I located iMovie in the APP Store and instead of a button saying BUY it was labeled as INSTALL.
    So having done those 2 steps, iMovie went ahead and updated to 10.0.4.
    My guess is the security software was blocking the update somehow.
    Hope this helps.
    Cheers

  • Upgraded to Firefox 4 now can not access my inbox in email. Error message say I have undefined new mails in the inbox

    Downloaded update toi mFirewfox 4. ISP is Talktalk. Can open My mail and get to screen with inbox but page seems to stopp loading then as it doesa not show amount of space being used etc which it normally does. Instead message says 'You have undefined new mails in your inbox' Nothing then happens and the button to open the inbox does not work. Can however access my email and inbox through Outlook express. Contacted TalkTalk help line and after running some checks was told that the problem is with the browser. Canb anyone help solve this please.

    Me too, problem is being googled alot by other tiscali users also.

  • TS1368 I am unable to access itunes store, error message states unable to complete my request at the time that it is temporily unavaiable?

    I have recently had a laptop with windows 8 on, i was able to access itunes store last night but as i was in there adding to my wishlist my laptop did an update and since then I have had this error message when trying to access itunes store. Can anyone help as i am not that good with computers. thanks

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/ht4627
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Error Message Elements 6, RAW 5.2

    Using Elements 6, I upgraded to Camera Raw 5.2. Now every time i try go to Full Edit from Organizer i get this message: "The Application or DLL C:/then my path/CameraRaw.8bi is not a valid Windows image. Please check this against the installation diskette".
    I reinstalled Elements 6, but i get this message whenever i open up any type of file.

    You should have removed the older raw plug-in first. Did you unzip the folder on the desktop and them move ONLY the plug-in into the file formats folder, not the whole folder it was in?

  • Error Message: Cannot change the undefined button ...

    My skype, received the message from friend, but i can't reply them.  When i click on the message, it appear 
    "Cannot change the undefined button (264,22)"
    Please help.
    Thanks in advance!
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

    syafini wrote:
    My skype, received the message from friend, but i can't reply them.  When i click on the message, it appear 
    "Cannot change the undefined button (264,22)"
    Please help.
    Thanks in advance!
    This is a know issue with latest Skype versions installed on Windows XP computers with old CPU without support for SSE2 instruction set.
    Uninstall the currently installed version and install the previous 6.21.0.104 version:
    http://download.skype.com/msi/SkypeSetup_6.21.0.10​​​4.msi

Maybe you are looking for