Error message from originating program when clicking on weblink to open FF4

FF4 is now my default browser on my WinXP netbook. (Instead of FF3.6.)
If FF is not open and I click on a weblink in Outlook or other programs, FF4 opens the webpage but I also get an error message in the originating program saying the system cannot find the file. If FF4 is already open I do not get the error message. FF3.6 did not generate this error message even though it took significantly longer to open than FF4.

Hi Srikar,
It depends.
Generally though you display a message in SAPGUI it does not display automatically in BSP.
Some times you have to manually write some code to populate and display a message in BSP.
First you need to find the BSP page and write some code to display error messages in the same..
Regards,
Sreekanth

Similar Messages

A way to display error messages from the program

Dear all,
I am looking forward to display a set of error messages(in a internal table) during the execution of the program to the user.
I wanted to know the better way of displaying error messages from my program with more options.
Well I tried out using displaying errors as ALV list/Grid or as simple list processing.
But I found some stanadard transactions (Like in MM and FI where errors are shown in a better way, but failed to find out how they are done.
Please guide me.
Thanks in advance
Aryan

Try to use application logging it has a very good way to display a set of messages.
[http://abap4.tripod.com/Using_Application_Logging.html|http://abap4.tripod.com/Using_Application_Logging.html]
Run this report in se38 an example sap report to understand logging way to show a set of messages
Report Name : SBAL_DEMO_01
Edited by: Vighneswaran CE on Dec 19, 2010 3:01 PM
Edited by: Vighneswaran CE on Dec 19, 2010 3:11 PM

Why do I keep getting error message from Digital Editions when trying to open it. Keeps telling me that it has encountered a problem and needs to close. I need this apparently to download a text book fro Proquest - need the text book for Uni work what giv

Why do I keep getting an error message from Digital Editions saying that it has encountered a problem and needs to close. I need this programme to download a text book from Proquest for University work what gives????

You are using ADE on Windows or Mac ? and their versions ??
Please restart your machine and try once again.
Thanks

Not found error message from LabVIEW runtime when called from VC++ with statically linked MFC

I have a dll built using LabVIEW 6i. I am calling the dll from a VC++ application. When the application loads I get an error pop-up 'cannot find LabVIEW runtime'. If I change the VC++ code to dynamically load MFC (using the loadlibrary function) or dynamically load the LabVIEW dll I created then the problem goes away. Only when both are loaded statically do I get the error message.
The target machine is running Win2K pro and has the LabVIEW runtime installed.
I do not want do dynamic loads as I need to call the dll from a legacy application. Are there any options to change the way LV links to MFC or to force the dll to find the LV runtime?
Alan Widmer

Ben,
I have attached a ZIP of the files required to test a DLL from an MFC application. Or you can build the same application by following the instructions below. I used the numtest dll that you previously sent to me so there is no 'magic' in the LabVIEW or dll.
In VC++ select NEW. Pick the MFC AppWizard (MFC) to build an MFC application. In the wizard select
Project Name: MFCNumtest
Single Document
No database support
No Compound document support
Support for ActiveX
Default settings on the Features page
MFC Standard
MFC as a shared DLL
From the ResourceView of the project explorer, add an item Test to the IDR_MAINFRAME menu then add an item Go as a submenu item (with an ID of ID_TEST_GO)
Right click the new menu item and run the Class
Wizard. Click Add Function.. button to make a function OnTestGo()
Open MainFrm.cpp and scroll to the end of the file to see the skeleton for the OnTestGo function. In this function add a call to the LabVIEW dll. You will also need to add a reference to the .lib file and the usual extcode.h.
When you run the app you will see a window with the Test menu item. Select it and click Go to run the call to LabVIEW.
This all works great. If you now go to Project | Settings and on the general tab change the Microsoft Foundation Classes: item from 'Use MFC in a shared DLL' to 'Use MFC in a static library' rebuild ALL files in the project and run the app you get the error message:
System error 998 while loading the LabVIEW Run-Time Engine (C:\Program Files\National Instruments\shared\LabVIEW Run-Time\6.0\\lvrt.dll).
numtest requires a version 6.0 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of numtest to correct this problem.
I apologies for my slow response, g
ot distracted by some other issues.
Thanks for your help,
Alan Widmer.
Attachments:
mfcnumtest.zip ‏44 KB

Error Message from BDC program

Hi all,
I'm facing the following situation: when i run a call transaction program for VL01:
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL TRANSACTION 'VL01N' USING bdcdata MESSAGES into MESSTAB.
sometimes when an item has no stock, i get the error message:
    MSGTYP = E
    MSGID = VL
    MSGNR = 643
    MSGV1 = '1'
    MSGV2 = 'UN'.
    MSGV3 = ''
    MSGV4 = ''
the problem: when i compose this message with FM - FORMAT_MESSAGE, i dont get the material code, to wich the loss os stock error referes to, since is not returned from call transaction execution (in messtab). How can i determine to which material code the error refers to ?
As anyone faced the same situation ?
   Best regards,
Pedro Castro

If you know the material number which you passed to the BDC, you can simply use that, if you are passing mulitple materials for one call of the BDC, then I don't think you can know which material it is erroring on if the message does not bring it back.
Regards,
RIch Heilman

Collect Error Message from SAP program to BSP Page

Hi Experts,
I am displaying an error message in the form of pop-up Message in a Screen based on a condition using BADI on R/3 screen , but when i am calling the screen from Portal (BSP PAge) I am unable to see the Error Message which is being displayed as a pop-up in r/3..
How to catch the error and display in BSP Page.....
I have searched the forum but didnt find any suitable replies....
Plz help
Regards,
Srikar

Hi Srikar,
It depends.
Generally though you display a message in SAPGUI it does not display automatically in BSP.
Some times you have to manually write some code to populate and display a message in BSP.
First you need to find the BSP page and write some code to display error messages in the same..
Regards,
Sreekanth

Error message from PC Suite when starting computer disconnected

Hello!
When I start my computer and it is not connected to the Internet I get an error message.
How can I avoid this?
System:
Windows 7 64bit.
PC Suite 6.0
Regards Abbe

SE website is not written support WIN 7? Is your computer system problems, let's see the closure or disabling antivirus software or firewall. Whether installation has other brands Suite software?
System requirements
Windows XP Home, Pro, Media Center (SP3)
Windows Vista 32 & 64 bits Ultimate, Enterprise, Business, Home Premium and Home Basic (With or without SP1)
Windows 7
Pentium II - 233 MHz or more
Windows XP: 128 MB RAM
Windows Vista: 512 MB RAM
50 MB of hard drive space
Any of the following connections that are applicable for your phone: USB Cable, Infrared or Bluetooth connection.

Since update to 9.3, when I click thumbnails of photos i get an error message that original photo cannot be found. Didn't have this problem prior to upgrade to 9.3 and 9.3.1. Any thoughts?

since update to 9.3, when I click thumbnails of photos i get an error message that original photo cannot be found. Didn't have this problem prior to upgrade to 9.3 and 9.3.1. Any thoughts?

This is the iPhoto for iOS forum. You should ask in the Mac iPhoto forum. iPhoto for is OS only on version 1.

HT202159 I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to downlo

I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?

It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

When I open itunes to play content I've already purchased and while attempting to view trailers for movies in the itunes store, I receive a generic error message from windows, and I'm directed to reinstall the latest version of itunes. Not a fix. Help?

after perusing other subjects with playback issues:
this is the fix:
-Launch Control Panel - Double click Quicktime, If you do not see quicktime, look on the top left side of control panel and switch to classic view. This will then allow you to see Quicktime.
-Now click the advanced tab and click on Safe Mode GDI Only, Apply, then ok.

All of a sudden my iTunes stopped working, and I get the following error messages: 1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem and 2. iTunes was not installed correct

All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
Thanks

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192)

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

I'm trying to burn a dvd from idvd but I keep getting error message, broken assets, but when I check my drop zones and their content there's no error messages on any of them?

Hi
And if You change view - in main "window/view field" so that You see the box-plot structure.
No exclamation marks there either ?
and non at the front page ?
iDVD do not copy Your material - only points to where it is stored. So if on any external hard disks, USB-memories, CDs or DVDs are missing - assetts are broken.
Or if You changed location of any material or directed iPhoto or iTunes or GarageBand to a new Library - Then iMovie/iDVD also get's lost.
Yours Bengt W

After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine:Are you sure you want to back up to the same device your original data is on? the WD disk has mounted??

After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?" I've reformatted in Disk Utilities...not sure what I did wrong. Any help would be appreciated.

Not sure what you mean by "booted" from it.
If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again.

'Cannot obtain error message from server' when trying to use ODBC

Post Author: Grant C
CA Forum: Data Connectivity and SQL
Hi, I'm developing some reports using Crystal XI on my local PC, using an Oracle 10i back end on a separate server. The SQL for the report is in a method in an oracle package.
When I set the datasource location, selecting 'Oracle Server' then entering the details works fine, and the report runs. However, when I try to use an ODBC connection I get the following error:
Database Connection Error: 'Cannot obtain error message from server.'
The ODBC link is set up as a System DSN, which works fine when I test it. I think I need to use ODBC as some of the reports (which I inherited) seem to fail when run on the Crystal Server, and it seeme to be the ones set up with ODBC which work.
Any thoughts? Thanks.

Hi Mars-
It sounds like your NI-DAQ installation may have become corrupted. I would suggest uninstalling and reinstalling the DAQmx 7.4 driver to correct this problem and ensure that you're up to date. This download is available here: NI-DAQ 7.4
If the problem persists you may want to uninstall and reinstall LabVIEW and then NI-DAQ in that order. The error message will usually give an indication as to which VI the error occurred in. Please let us know which VI is failing if you're unable to avoid the error with these suggestions.
Have a good day-
Tom W
National Instruments

Error message from originating program when clicking on weblink to open FF4

Similar Messages

Maybe you are looking for