Error message Importing clips

I have an external drive with quicktime clips on it. I could not use the log and transfer tool to bring these in I kept getting an error message stating "Clips contain unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media". These are .mov files why is log and transfer not allowing me to import? The clips are DVC PROHD 720p 60 I am able to import (only one at a time) using MPEG Stream Clip exporting as Apple DVCPRO 720p 60.

"Clips contain unsupported media or has an invalid directory structure...."
You have to copy the entire card that the camera records on with all the sub folders. Simply copying the clips will cause this error.
As for MPEG Streamclip only converting one clip at a time, [read this|http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0].

Similar Messages

I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry

When opening a msword file wit .doc extension i get an error message: import error. The file format is not valid

when opening a msword file with .doc extension i get an error message: import error. The file format is not valid

Looks like. I tried in the TextEdit format tab to set all the combinations while opening the file, like plain text, rtf and html without success. Always I get the same signs.

Why won't my video won't import into iMovie. There is a red ERROR message underneath clip.

I just imported 40 out of 43 clips of HD video from my JVC HD Everio camera into iMovie '11. It's my first time using either equipment for editing. I selected import all but only 40 of the clips successfully imported. 3 of the clips were not able to be imported but I can still play the clips fine from the import window. The clips all have red error messages underneath them. This is an issue that I've seen posted other places online but it doesn't seem to be resolved. It's very frustrating for me, I've been researching online to try to fix this for hours now. The closest I have come to a solution involved deleting extra 3rd party plugins from my quicktime folder however I don't have a folder named "Quicktime" in my Library. So I don't know what to do. Please help!

The error message appears under video clips already imported into iMovie. Like in this screenshot http://km.support.apple.com/resources/sites/APPLE/content/live/VIDEOS/0/VI57/en_ US/imovie-start-poster.jpg on my mac out of the 6 clips shown per row, only 5 of them have the word "imported" underneath them in white letters and then one of the clips has the word "error" underneath it.
I don't think it's a corrupted file because yeah I can play the three clips just fine. The page that I read that had that fix in it (deleted plugins) was here: https://discussions.apple.com/thread/1893021?start=0&tstart=0 The correct answer is near the bottom of the page and was posted by iphonejunky. Maybe the fix would be that simple but like I said, I can't find a folder named quicktime in my library. I don't know if I'm just stupid or what.
I don't think I have Flip4Mac installed because I never consciously installed it. I use VLC for playing most video. The clips imported are all .mov

How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks

Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

Image Capture Error Message Import Error -9912

Hi
I was backing up the photos and videos from my iPhone 5s to an external hard drive that I have. I have done this many times before without a problem. Today, I encountered an error. It said "Import Error (-9912)" and 1,025 items were not imported.
Please could someone explain what this error message means and if possible give me some tips to solve it.
Thanks
Nick

Try the links in "More Like This" to the right, and also google "Import Error (-9912)"
(Looks like you're not alone with this error, those links might have some other suggestions)

ERROR MESSAGE IMPORTING CD

For the very first time ever, I've gotten a message, as soon as I try to import a cd, which states, "An error occured while trying to import the file... The current encoder settings for bit rate and sample rate are not valid for this file". WHAT!!!!!! I've NEVER had any trouble importing my CD collection into iTunes. Especially not while importing with the AAC Encoder. Does anyone have a clue as to why we're now getting this error message? Is there a fix to this problem? The bit and sample rates have ALWAYS been valid before. So why the change now. Could this be some sort of back-handed way from Apple, to have us stop putting our CD collections into iTunes? (I know it's a stretch) When I use the LOSSLESS Encoder or MP3 at higher bit rates everything works fine. But, as everyone is well aware this encoding takes up way more space, therefore less tunes in our iPods. I vaguely remember reading somewhere that eventually we won't be able to transfer our CD's (that we payed for) onto digital, portable music players. We'll have to buy everything from places like the iTunes store. I've also heard from different people that eventually, we won't even own anything anymore. We'll only be able to rent music, videos, dvd's, etc. We won't be able to store anything permanently onto our hard drives. If you want to listen to your favorite music, you'll have to pay everytime for the same songs over and over again. Does anyone at Apple know what this problem is all about? I'd appreciate any help whatsoever. Thanks.

I don't think so, it's saying the iTunes Library file cannot be saved. The disk you are using is full....

Organizer Error message importing to Editor

Okay I have pse 5 on my windows computer, I just upgraded to CS4. Now I have installed it on my computer. When I open the organizer, select my photo to be edited by CS4, under Edit there is an option for Photoshop along with Editor. When I click on it, I get this error message An error occurred attempting to edit to the external editor. I click okay and Im taken back to the organizer. Nothing goes to cs4. Do you have any idea what has happened? I would love to continue using the organizer and it was suggested that I select my photos, drag and drop into Photoshop which does work. However I first select my photos and put them on the page as I see fit, save the file, close all the photos. I then go to the kit I want in the organizer and select the papers I want and drop them into Photoshop. I add those to my page and close the paper files. Then I go back and try to get the png files and none of those with drag into CS4. I have to open them through File open in CS4. So I figured if I got the option part to work, Id solve my other issue.
Thanks, Marcie

My advice is uninstall the current version of MediaSource, go to the downloads page (click the link Support > Downloads on this page), and get:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource
Install . then connect the player to the PC. Then install 2. and 3. (the player must be connected for 2. to verify you have a Creative product).

Error while importing clips from card ?

Hi everybody. Hope you're well and thanks for helping.
I use the board occasionally when I have a problem obviously or sometimes I just browsing to get more familiar. I'm a fairly experienced user. I've maybe made 2-3 dozen dvds; I burn a lot of stuff to mp4 for smaller storage, maybe 3-4 times a month. Here's my question.
The tools....
iMovie 9 on a 13" MacBook Pro. 500 gig drive with usually 100-150 gig of room
Canon Vixia HF20 HD camcorder
SanDisc Extreme smart card, rated at 10, holds 16 gig.
Basically what happens is I film myself practicing ( I'm a musician) fairly often and use the smaller frame rate so I can film to the card and
load it with the reader. At the end of the afternoon I usually have 3-5 clips to import.
When I load them thru the card reader there's no problem recognizing the card, but the computer will NEVER import all the clips without an error..
Maybe I'll get 2 out 4, or 3 out of 5 to load completely. But the others will only load a minute, sometime just a few seconds before they read ERROR in red underneath the clip. Eventually I get them to all load by ejecting the cardand starting over, unchecking the clips that were completed and just loading the ones with error. And I'm constantly initializing the card in the camcorder.   Maybe I should try a different card though,haven't done that yet...
At any rate, the error mesages happens ALL THE TIME, like.. every day...    Does anyone have an idea what's happening ?
(and no problems ever with the USB transfer ).
Thanks in advance
(wishing I could run Adobe movie software on this but I'd need a MUCh bigger system)

Hi there and thanks..
Quick details..
iMovie 9, version 8.0.6 running on 10.6.8. I was exporting to mp4 yesterday and couldn't get the info..
So the card definitely mounts, that's never a problem. I'm going to try your suggestion.
When I copy the card contents to the desktop, can you tell me what I will need to do to import to iMovie ? I'll go to import movies on the dropdown, then select the copied file from the desktop.   Will I have to select the specific movie files ( mts format , maybe ? ) or will it read the movie fles automatically ?
I can always make a copy in disc utility as well I suppose.
Thanks again...

OWB error message - Import service related

Hi,
I get this message when I try to use the Import Metadata wizard in OWB - 11.
Import service failed when try to make connection to the metadata location and got the following error:java.lang.NullPointerException .
I have also registered the user and tested the corresponding user connection.
Any suggestions will be much appreciated.
Thanks.

Hi,
I have got this issue resolved by installing the Oracle 11 E-Edition . Guess that's the only way this can be resolved. As though the Personal edition offers most of the Enterprise Edition options , including OLAP , there is an issue when owb queries the v$version view of the personal edition (searches for 'Oracle%' and does not get a result) due to which this error arises.
If there are any other alternate approaches , do suggest for the common good.
Many thanks.

Error Message - Import Manager

Helllo All
I recieve a message when trying to import some records
The Map cannot be loaded because the table "Record" is not a source.
We are "missing" the table "Record" from the dropdown.
Can some one tell me how I can add/fine this table again?
Regards
Con

Hi,
In your case the "Record" disappears whenever you have only one record in your XML file. Instead of displaying nodes under "Record", it displays all fields under its parent node (let us say "Records").This situation occurs specifically whenever you are trying to import an XML file without refering to an XML Schema.
To make things clear further: You created a map with an XML file that has more than one record i.e., with a file that has the "Record" node. So, whenver you try to open the map with another XML file that has only one record it fails as there is no "Record" node.
Solution: Always refer to an XML Schema. This way, you are enforcing the XML structure i.e., "Record" node will be available even if you have only one record in your input XML file.
Please let me know in case you need more details in this regard.
Hope this helps,
Regards,
Rajani

Error Message : "Importer detected a generic error" Please Help.

My problem is most likely very simple, with the research I've done I've concluded it is one of 2 options(probably):
1. The project settings are wrong - I've tried quite a few within NTSC(where I should be) but the same error occurs. I am using videos taken by my Iphone 4s. I'm just not sure on any of it and couldnt seem to find an answer online.
2. I didn't import them correctly. I've been importing them simply just by clicking on the files from my iPhone's folder while it is plugged in and dragging them into another foler on my computer. I know this isn't correct but I didn't have a importing software and I could still watch them on Windows Media Player so I thought it was fine.
It could be something else but I have everything installed for it to work so I'm not sure. I may need to download a program that allows me to convert specific properties or something?
I'm pretty confused with all the properties to videos and video formatting so I'm having difficulty solving this on my own. Thanks for the help (:

>using videos taken by my Iphone 4s
Iphone won't easily edit http://forums.adobe.com/thread/881246
-and http://forums.adobe.com/thread/1011411?tstart=0
-and a fix http://forums.adobe.com/thread/934466

Importing Script file for speech analysis - error message

I'd love to get some assistance to get past an error message in Premiere Pro CC, "Matching scene number not found". However, I've named the scene number and the clip to match, simply as "1". What am I missing? NOTE: the scene is 33 pages long as this is a long speech that I've transcribed and would like to match up to the video clip . . . just in case that is an issue that someone has experienced in the past. But I'm hoping length of clip isn't a problem (as this is a typical work flow scenario for me).

Hi,
Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
But again it works for the third time..
Error Message:
Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
Please help...

Error while importing zip file for second time to B2B through ant script

[echo] args=import
importstatus:
[echo] Commandline arguments 1: [import]
[echo] Import with overwrite=true
[echo] B2BCommandLineUtility: importRepository: Error messages:
[echo] MDS-00521: error while reading document /soa/b2b/tpa_JOvrtiV-7030143
019445112136.xml from metadata repository
[echo] MDS-00520: failure to read document /soa/b2b/tpa_JOvrtiV-70301430194
45112136.xml because it is not in the metadata repository
[echo] MDS-00911: Document with name "/soa/b2b/tpa_JOvrtiV-7030143019445112
136.xml" and version 16 does not exist in the repository.
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo] ORA-01403: no data found
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
[echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
[echo] ORA-06512: at line 1
[echo]
[echo]
Can anybody plz help???
Thanks in Advance!!!

Hi,
Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
But again it works for the third time..
Error Message:
Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
Please help...

Error message when opening a Pages Document

I unintentionally added a .doc extension to a pages document. I erased the .doc extension, and now when I try to open it I get an error message "Import Error, Unknown Error".
What shoudl I do to be able to open my document?
Thanks in advance

When you deleted the .doc extension did you then type in .pages? Otherwise your Mac & Pages won't know it's a Pages document.
That is assuming is not a Pages document you export as Word & want to change back to Pages.

Error message Importing clips

Similar Messages

Maybe you are looking for