Error Message in Market Planner

Hi,
Does anyone know if the following error has any effect on "Warning System CLNT400BW0 cannot be reached" on the Market Planner? What do i have to do to eliminate this message? Call in basis/BW team?

Hi Noobie
this warning comes, because the BW client is not available for you to use and the marketing planner needs it for key figure planning and analysis.
But the marketing plan can work with this warning also but these functionalities will not be available to you
If you want this error not to come, you will have to get the logical system for BW created and connectivity maintained
Hope this helps
Regards
Rekha Dadwal

Similar Messages

Error message if i want to register in SAP service market place

Hi...
I am getting this error message while registering in SAP service market place how can i solve this problem and what is the way to register.The following is the error message:
A user ID cannot be created with the specified data, because no (valid) e-mail domain is registered for your customer number.
Please contact your SAP system administrator and request that he/she maintain your company's e-mail domain. You can then request a user ID again here.

Hi,
Did you solve this problem? We are also facing the same..

Error message in Android Market

When i got the new android market now when i go into the market and then go to my app to check for updates i get an error message (a server error has occurred. Retry or cancel and then just crashes anyone seeing this need help.

On your device you will want to do a soft reset by powering the device off for 5 seconds then power back on. Once powered back on, you will dial *228 and press send. You will be provided with options to select and you will select option 1 to re-program your device. Your phone will then reboot after the process has been completed.

Short dump while executing Market Planner

Hi,
Working on CRM4.0 sp6 .
While executing Market Planner(CRM_MKTPL) getting dump....
Syntax error in program "CL_CRM_MKTPL_APPL_BASE==============CP".
Can enyone help out.
Thanks,
Anirban

Hi Anirban
In general, if you are getting a syntax error in a standard SAP program (non 'Z' namespace for ABAP) then you probably should search the SAP Service marketplace for notes. Particularly in an older SP like yours.
There are other notes to consider, eg 735219.
If you do not find a note, then you probably want to take advantage of SAP's AGS and create a customer message. It may be a newly discovered bug.
Cheers
Dom

Unable to create a new campaign in marketing planner

Hi experts,
I'm not able to create a new campaign in the marketing planner iview, or a new lead in the leads iview. Every time I click on ''create'', an error message: ''impossible viewing the page'' appears in the botton-left part of the screen.
Thanks and regards

Good day,
Had the same error and solved it by doing the following;
Go to t/code DNO_CUST01 and double click on SFL1 and make sure "number range" is 01 and "action profile" is SLFN0001_STANDARD_DNO.
Your number range interval in t/code CRMC_NR_RA_SERVICE should be consistant with NR details in t/code DNO_NOTIF (check note: 498984 to set it up)
Good luck.
Cheers
Anthony Cunha

Unable to create a new campaign in marketing planner iview

Hi experts,
I'm not able to create a new campaign in the marketing planner iview, or a new lead in the leads iview. Every time I click on ''create'', an error message: ''impossible viewing the page'' appears in the botton-left part of the screen.
Thanks and regards

Good day,
Had the same error and solved it by doing the following;
Go to t/code DNO_CUST01 and double click on SFL1 and make sure "number range" is 01 and "action profile" is SLFN0001_STANDARD_DNO.
Your number range interval in t/code CRMC_NR_RA_SERVICE should be consistant with NR details in t/code DNO_NOTIF (check note: 498984 to set it up)
Good luck.
Cheers
Anthony Cunha

Problems with activation of CRM_MKTELM hierarchy from CRM Marketing Planner

Hi Guru's
I am facing a problem between CRM 5.0 and BI7.0 in the Marketing Planner. When I create a marketing plan with elements in the marketing planner, it cannot update the hierarchy for InfoObject CRM_MKTELM in BI7. The error message:
Data in SAP BI could not be updated completely: see log
Message no. CGPL_BW_INTERFACE014
When opening the log it says that the hierachy does not exist. After this in BW there is now an A and M version of the hierarchy CRMMKTROOT, the M with the latest elements from CRM. (from here i can now activate the M one manually)
The action Activate BW Hierarchy in the Marketing Planner does not seem to work. We tried to run the activation program in CRM as well, without succes. We also checked the settings in SPRO in CRM, and looked at some notes as well.
Does anybody have a clue on this one?
Greetings,
Raimon

Hi Raimon,
Please check note-
Note 460302 - CRM_MKTPL: Double message concerning BW update
Regards,
Anil

Error message after trying to install Tiger on a B/W G3

I've tried several times now to install OS 10.4 Tiger from the black install DVD onto my B/W G3. Every time, it gives me a error message saying there were errors during installation and to restart. I've got 512-640 MB of RAM (I've removed one after market 128 RAM hoping that would help). I upgraded the HD to a Maxtor 200GB a couple years ago. I'm at a loss as to where to go from here. We just got new iPods and can't even load them until this OS is upgraded. Other than buying a new Mac, what can I do to resolve this issue?

I would, but I don't have it on CD. I finally got the drives switched and the drive was ready to be rebuilt when DW gave me an error message saying there was a file open on the HD. I've basically figured that it is beyond repair until I can get my files backed up and reformat the drive.
In the meantime, my brother is going to give me his iMac G5 and upgrade to a new Mac.
Thanks for all the help.

Error message : SOFFICEINTEGRATION143

Hi
Iu2019m making my planning layout in T-Code u2013 KEPM when I execute the planning method, I received this error message: Error while opening document.
Can anybody help me to resolve this error? Please see the message:
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Procedure
Check first whether you can insert a document from this desktop application as an embedded object in another application. The necessary menu item is usually 'Insert --> Object'. The application then lists all of the OLE document types. Choose the type corresponding to the desktop applciation. If the insertion fails, the error is in the desktop application itself.
This error has various causes. Often, it is caused by activating certain add-ins. Sometimes, the desktop application is wrongly installed. The error should not recur once you have disabled any add-ins or reinstalled the desktop application.
Procedure for System Administration
If you cannot solve the problem as described above, enter a problem message. There are notes relating to how to generate the log file using the program SAPROFFICEINTEGRATIONTRACE.
Regards
Louie
PS. We upgrade our SAP gui to 7.2 version

Hi Louie,
The most errors occur because the Microsoft Excel template stored
in Transaction KP34 for the corresponding layout is incorrect.
You cannot avoid this in advance since you have formatting options
(which cannot be deactivated) in Excel that result in problems in case
of an inplace.
Please check the following steps.
For each planning with active Integrated Excel the system needs a
template Excel sheet ("Template"), which is filled with the current
data (in accordance with the specifications on the initial screen)
upon the call of the planning screen.
In the profile maintenance (Transaction KP34), you can save a
separate template for every layout, e.g. to store color changes.
This template is stored in the R/3 system. If no separate template
exists for the current layout, the system uses an empty standard
template which contains the macros necessary for planning "only".
Error message SOFFICEINTEGRATION143 indicates that a separate
incorrect template was saved. In the most cases users
removed or hid lines lines while setting-up the template in
Transaction KP34, or he even stored own macros.
To repair the incorrect template presumably makes no sense, however,
since there is a "link" between the layout and the template,
removing the layout and inserting it afterwards again into the
planner profile often does not even help to make the layout
accessible again.
Using the utility program KPP7UT03 you can delete existing
templates. Here, it is important that you make a restriction to the
layout in question on the initial screen, since otherwise the system
may delete several (or even all !) Thus you should make the
following specifications:
a) Planner profile,
b) Subclass (always 01),
c) Table name (Planning area -> F4 input help) and
d) Planning layout.
The profile item is only relevant if a layout has been entered more
than once in the same profile. The program has no test run.
Afterwards the empty standard template is used again for the
respective layout.
For more detailed analyses of the template used in each case you can
save this onto your own hard disk as follows:
a) Set a breakpoint in function module KPP_XL_TEMPLATE_GET_COPY.
b) Call up the planning transaction, go to the planning screen.
c) When the function module is reached, "empty" variable I_MODUS.
d) Set a breakpoint to success message K9353.
e) Continue processing (F8).
f) The system generates a dialog box on which you can specify the target location of the Excel file.
g) Continue processing (F8).
h) Cancel the transaction when you reach the breakpoint.
You can now examine the template . Especially for recurring problems you can access the
changes stored this way.
Also recommend to check note 499152.
I hope it helps.
Regards,
Fernando Evangelista

Error message "Error while calling up RFC"

I got this error message with a testuser in our quality system when I want to call up a web interface to enter some plandata.
I think it's a problem with authorization; the authorization object 'S_RFC' is set in the role. Is there another authorization object that should be used?
THX so long, Clemens

Hi Mohammed,
If you are getting this error currently Please go to Sap market Place and Search with the Key words of Short Dump " PARAMETER_CONVERSION_ERROR".
Also you can raise this with your Basis team who should be able to help you out with the same.
Thanks & Regards,
RDS

Error Message AM057 while deleting contact person in customer master

Hi,
Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
The performance assistant shows nothing but message no. AM057.
Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
Data in table ADRVP looks as under.
Cl.     Person            Seq. No.      Table      Field           Application table key      pers.addr. Key      Addr. no.            Owner
300   0200591046          1            KNVK     PRSNR      2000000093060             BP                         0200026699       X
300   0200591046   45333695     KNVK     PRSNR      3000007093060             BP                         0200026699       X
Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
Thanks,
Balaji

Balaji Srinivasan wrote:
Based on the couple of OSS notes I have searched,
You should share the OSS note which you got from market place.
Have you checked this note Note 445825 - Error message AM057 when deleting a contact person ?
It has the reason and solution.

Error message FI 759: Fund does not exist in FM area

Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
    fields' in the standard layouts, in other words depending on the
    permissibility of the initial value for a field an entry is always
    demanded. To prevent this there are two options:
    a) Copy the desired standard layout into an own (transaction KP65,
       KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
       set the corresponding field to 'Optional". Then, add this layout
       to your planner profile with transaction KP34.
    b) Implement the attached program ZK555134 (correction instruction
       461025). After the entry of planning area and layout all fields
       of the Funds Management are set depending on your selection of
       'Optional' or 'Not optional' (standard system). Like this you can
       also change standard layouts. The check for the fields for which
       'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa.

I am getting this error message "ORA-01006: bind variable does not exist.

My code works fine like this:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE
FROM R5EVENTS WHERE ROWID = :ROWID;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_JOBTYPE , 'X') IN ('BRKD','UNPLBRKD','FILTRA', 'LUB', 'FAC') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;
But I want to change the code to include a record (ACT_TRADE) from another table(R5ACTIVITIES). I am getting this error message "ORA-01006: bind variable does not exist - POST-UPDATE 200Before Binding". Any help would be appreciated.
DECLARE
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
V_CODE varchar2(8);
V_EVENT varchar2(8);
V_TRADE varchar2(8);
BEGIN
SELECT R5EVENTS.EVT_STATUS, R5EVENTS.EVT_FAILURE, R5EVENTS.EVT_CAUSE, R5EVENTS.EVT_ACTION, R5EVENTS.EVT_CODE, R5ACTIVITIES.ACT_EVENT, R5ACTIVITIES.ACT_TRADE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, V_CODE, V_EVENT, V_TRADE
FROM R5EVENTS, R5ACTIVITIES WHERE V_CODE = :V_EVENT;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_TRADE , 'X') IN ('MTM','MTL','MTMGT', 'FTM', 'FTL', 'FTMGT', 'R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

Thank you for your responses. Your feedback was helpful. This is what I ended up doing for a solution:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
v_GROUP varchar2(30);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE, USR_GROUP
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE, v_GROUP
FROM R5EVENTS, R5USERS WHERE R5EVENTS.ROWID = :ROWID
AND USR_CODE = O7SESS.CUR_USER;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(V_GROUP,'X') IN ('MTM','MTL','MTMGT','FTL','FTMGTS','PLANNER','DISPATCH','PMCOOR','R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

"Entitlements are not valid" error message when trying to sync ipa file from iTunes to iPad

Is anyone else getting this error message, "Entitlements are not valid", when trying to sync .ipa file from iTunes to iPad?
The issue I'm having is getting the ipa file that was built by the 'Adobe Flash Packager for Iphone' installed into my iPad.
So, I have a swf file that works and was able to publish it into the Android Market. I then compiled and build the same flash project with the Packager for Iphone into an .ipa file. But when I try and install this .ipa file into my iPad to do my testings, i'm getting the error message.
I would like to test my ipa file in my iPad device before submitting it to the Apple Store.
Any help would be appreciated. thank you.

Developing for iphone can be amazingly complicated and frustrating. (even before you start coding). The process of having to create a Certificate, to approving the Certificate, to Assigning the deviceIDs to the certificate, to creating the AppIDs, to creating the provisioning profiles and then creating the .p12 file... is just too tedious.
I solved the problem of the "Entitlements are not valid". The AppID i had set in the iPhone Developer Portal did not match that of the AppID i had set in the Adobe Flash CS5 -> Publish Settings. (ie. com.yourdomainname.yourappname). After I re-entered my AppID and compile, i was able to sync the .ipa file into my ipad.
I wish the error message had been a little more descriptive. Could have saved me a whole day.
I hope this helps others. But my guess is, if you don't set the 40 character device ID correctly, or the email in the signingcertificate correctly, you'll get this same generic error message.

Error message IN MARKETPLACE

EVERYTIME I TRY TO DOWNLOAD AN APP FROM THE MARKETPLACE I GET AN ERROR MESSAGE - SORRY THE APPLICATION MARKET HAS STOPPED UNEXPECTEDLY . PLEASE TRY AGAIN. MY HUSBAND HAS NO ISSUES WITH THIS ON HIS PHONE. DO I HAVE SOME SETTING WRONG ON MY PHONE??

Try clearing the data for the Market.
Go to settings > applications > manage applications > all tab > scroll down to the Market app. Select it and press the clear cache, clear data and then the force stop button. Reopen the Market app and accept the terms of service again.

Error Message in Market Planner

Similar Messages

Maybe you are looking for