Error message in pulling data from R/3 to CRM
Hi,
I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
As far as I know, SAP had an on-going dialog enhancements on this one, is there anyone knows any recent updates from SAP that might solve this problem?
Please help.
Thanks.
Hello,
according to our development this message only should accur in case there are inconsistencies on R/3 side which lead to such errors in inbound processing.
Therefore in case you don't see any inconsistencies I would recommend to address it via OSS message.
Best regards,
Christian
Similar Messages
-
Error message while loading data from data mart
Please can some one help on this.
While loading data from one cube to another (I am actually creating a backup of original cube) for 1 record I am getting the error message " internal error occured with time split" The long text of error message says Message no. RSAU101Take a look at this thread:
Internal error occured with time split
Hope it helps,
Gilad -
Error message: when downloading data from 2nd display tag table
I am using disaply tag to display data in jsp page. I am using three different section to display the data with three display tag table. The data is displaying correctlly. The display tag downlod excel sheet is working for first display tag table. When i am trying to download data from 2nd and 3rd display tag table i am getting following error:
Exception: [.TableTag] Unable to reset response before returning exported data. You are not using an export filter. Be sure that no other jsp tags are used before display:table or refer to the displaytag documentation on how to configure the export filter (requires j2ee 1.3).
at org.displaytag.tags.TableTag.writeExport(TableTag.java:1438)
at org.displaytag.tags.TableTag.doExport(TableTag.java:1364)
at org.displaytag.tags.TableTag.doEndTag(TableTag.java:1215)
at org.apache.jsp.InstalBase_005fReport_jsp._jspService(InstalBase_005fReport_jsp.java:974)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:595)
As per the Exception i don't have any jsp tag before the display tag.
Please help me if any body has any solution for the above exception.
Thanks in advance.
Smruti..See also http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
-
I'm trying to pull data from an Oracle database using SSIS. When I try to select a few fields from the source table, it returns the following error message:
[OLE DB Source [47]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-01858: a non-numeric character was found where a numeric was expected".
The source columns are a combination of numeric and texts, and I've also tried selecting one of them, which didn't work. I'm using the Oracle client 11.2.0.1, and it works fine with any other data sources I have connected to so far. How can I resolve this
error?Hi H.James,
According to your description, the issue is a non-numeric character was found where a numeric was expected while pulling data from an Oracle database in SSIS.
Based on the error message, the issue should be you are comparing a number column to a non-number column in a query. Such as the query below (ConfID is a number, Sdate is a date):
where C.ConfID in (select C.Sdate
from Conference_C C
where C.Sdate < '1-July-12')
Besides, a default behavior for the Oracle OleDb Provider that change the NLS Date Format of the session to 'YYYY-MM-DD HH24:MI:SS can also cause the issue. For more details about this issue, please refer to the following blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/01/20/every-bug-is-a-microsoft-bug-until-proven-otherwise.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Error in pulling customer master data from R/3 to CRM
Hi,
I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
Is there anyone knows any recent updates from SAP that might solve this problem?
Please help.
Thanks.Hello,
it seems your customizing of ERP and CRM is different in this area.
Please try a new initial load for all the customizing objects which may be responsible:
DNL_CUST_BASIS
DNL_CUST_BASIS2
DNL_CUST_BASIS3
DNL_CUST_BASIS5
DNL_CUST_BASIS6
DNL_CUST_BNKA
DNL_CUST_KTOKD
DNL_CUST_PRC
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_PROD3
DNL_CUST_SPROD
DNL_CUST_TVAST
DNL_CUST_TVFS
DNL_CUST_TVKN
DNL_CUST_TVLS
We do every week a new load of this objects using a background job.
Alternativly you could investigate which customizing object is the correct one and only load this.
After this new load retest your scenario.
Best regards
Manfred -
Error when updating the data from DSO to cube
Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
AnnieHi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha -
Unable to connect to the server to pull data from mysql
Hello,
I am novice working with Flash Builder 4 and I just created a test application which runs well in my computer pulling data from Mysql using PHP and populating a datagrid. But when I transfered it to the my hosting provider failed. I have been doing some modifications to the gateway.php and amf.config.ini to solve some of the issues. Now the application try to run but doesn't populate the data in the datagrid. I included a tracking point in my data service file to read the connections variables, but they come up in blank. I highly appreciate any help. Here are my gateway.php, amf.config.ini and the data service.
gateway.php
<?php
ini_set("display_errors", 1);
$dir = dirname(__FILE__);
$webroot = $_SERVER['DOCUMENT_ROOT'];
$configfile = "$dir/amf_config.ini";
$fp = fopen("tracking.txt", "a");
fwrite($fp, "1-config file " . $configfile . "\r\n");
//default zend install directory
$zenddir = $webroot. '/ZendFramework/library';
//-$zenddir = $webroot;
fwrite($fp, "2-default zendir" . $zenddir . "\r\n");
//Load ini file and locate zend directory
if(file_exists($configfile)) {
$arr=parse_ini_file($configfile,true);
if(isset($arr['zend']['webroot'])){
$webroot = $arr['zend']['webroot'];
$zenddir = $webroot. '/ZendFramework/library';
if(isset($arr['zend']['zend_path'])){
$zenddir = $arr['zend']['zend_path'];
fwrite($fp, "3-after zendir" . $zenddir . "\r\n");
// Setup include path
//add zend directory to include path
set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
// Initialize Zend Framework loader
require_once 'Zend/Loader/Autoloader.php';
//-require_once 'Autoloader.php';
Zend_Loader_Autoloader::getInstance();
// Load configuration
$default_config = new Zend_Config(array("production" => false), true);
$default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
$default_config->setReadOnly();
$amf = $default_config->amf;
fwrite($fp, "4- configfile" . $dafault_config["production"] . "\r\n");
// Store configuration in the registry
Zend_Registry::set("amf-config", $amf);
// Initialize AMF Server
$server = new Zend_Amf_Server();
$server->setProduction($amf->production);
if(isset($amf->directories)) {
$dirs = $amf->directories->toArray();
foreach($dirs as $dir) {
// get the first character of the path.
// If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
$length = strlen($dir);
$firstChar = $dir;
if($length >= 1)
$firstChar = $dir[0];
if($firstChar != "/"){
// if the directory is ./ path then we add the webroot only.
if($dir == "./"){
$server->addDirectory($webroot);
}else{
$tempPath = $webroot . "/" . $dir;
$server->addDirectory($tempPath);
}else{
$server->addDirectory($dir);
fwrite($fp, "5-temp path" . $tempPath . "=>" . "\r\n");
fwrite($fp, "******************************************" . "\r\n");
// Initialize introspector for non-production
if(!$amf->production) {
$server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
$server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
// Handle request
echo $server->handle();
?>
amf.config.ini
[zend]
;set the absolute location path of webroot directory, example:
;Windows: C:\apache\www
;MAC/UNIX: /user/apache/www
;-webroot =c:/wamp/www/
webroot = /home/frutiexp/public_html
;set the absolute location path of zend installation directory, example:
;Windows: C:\apache\PHPFrameworks\ZendFramework
;MAC/UNIX: /user/apache/PHPFrameworks/ZendFramework
;zend_path = /home/frutiexp/public_html/ZendFramework
[zendamf]
amf.production = true
amf.directories[]=fb41/services
;amf.directories[]=./
CoursesService.php
<?php
* README for sample service
* This generated sample service contains functions that illustrate typical service operations.
* Use these functions as a starting point for creating your own service implementation. Modify the
* function signatures, references to the database, and implementation according to your needs.
* Delete the functions that you do not use.
* Save your changes and return to Flash Builder. In Flash Builder Data/Services View, refresh
* the service. Then drag service operations onto user interface components in Design View. For
* example, drag the getAllItems() operation onto a DataGrid.
* This code is for prototyping only.
* Authenticate the user prior to allowing them to call these methods. You can find more
* information at <link>
class CoursesService {
var $username = "myusername";
var $password = "mypassword"
var $server = "localhost";
var $port = "3306";
var $databasename = "frutiexp_trainsur";
var $tablename = "courses";
var $connection;
* The constructor initializes the connection to database. Everytime a request is
* received by Zend AMF, an instance of the service class is created and then the
* requested method is invoked.
public function __construct() {
$this->connection = mysqli_connect(
$this->server,
$this->username,
$this->password,
$this->databasename,
$this->port
$fp = fopen("./tracking.txt", "a");
fwrite($fp, "1-service". $databasename . " " . $username . "\r\n");
fclose($fp);
$this->throwExceptionOnError($this->connection);
* Returns all the rows from the table.
* Add authroization or any logical checks for secure access to your data
* @return array
public function getAllCourses() {
$stmt = mysqli_prepare($this->connection, "SELECT * FROM $this->tablename");
$this->throwExceptionOnError();
mysqli_stmt_execute($stmt);
$this->throwExceptionOnError();
$rows = array();
mysqli_stmt_bind_result($stmt, $row->cou_id, $row->cou_title, $row->cou_overview, $row->cou_objectives);
while (mysqli_stmt_fetch($stmt)) {
$rows[] = $row;
$row = new stdClass();
mysqli_stmt_bind_result($stmt, $row->cou_id, $row->cou_title, $row->cou_overview, $row->cou_objectives);
mysqli_stmt_free_result($stmt);
mysqli_close($this->connection);
return $rows;
* Returns the item corresponding to the value specified for the primary key.
* Add authroization or any logical checks for secure access to your data
* @return stdClassHello Jdesko,
Thank you for you prompt response. Yes, I have changed the connections variables in my dataservice ( I didn't post real values). You are right, after all I didn't make changes on the gateway.php except to add some tracking points. The one that I changed is the amf.config,ini. The application runs without any error exceptions, but don't populate the datagrid. According with the tracing is stoping just when establishing the connection to the database. Please let me know if you have any other clue. thanks -
Error while retrieving bulk data from mdm in staging server
I am getting an error while retrieving bulk data from MDM. The error goes like this "NiRawReadError: An error occured when reading data from socket.".
Could anyone please suggest me about the possible cause of this error. Please reply soon.
Moderator message: network error, relation to ABAP development unclear, please search for available answers, check with system administrators, consult SAP service marketplace.
Edited by: Thomas Zloch on Nov 22, 2010 5:16 PMCan you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted. -
No data Exists error while retrieving the data from a table
Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding thisHi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake.... -
I have set-up an ECT in SPD2013 on SP2013. It is a SQL Data source called ProjectWebApp. I have BCS/SSS set-up. I can create an ECT OK in SPD. I can add the ECT to a custom list.
The problem is when I add a new item in the list the following error message appears in red
An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
I cannot filter or return any results. There is data in the DB.
Another test I do is to try and create a new App/List using the "External List" template. When
I select the ECT a red message appears "External Content Types are not available". which is odd since I can add an ECT to a list as mentioned above.
Any ideas?
Tx
Andrew
Andrew PayzeHi Andrew,
Please try the option Allow unlimited length in document libraries in the column settings:
http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
Please provide error message in ULS log for further troubleshooting.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Error, while pushing the data from Oracle to MSSQL.
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view. -
Error message when importing data using Import and export wizard
Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I've been syncing my iPhone to my (non-apple) desktop for several months without difficulty.
Today I accepted the latest upgrade to my iPhone software.
Since it installed, it will not sync.
It gives the error message "iTunes could not sync calendars to the iPhone "Steve's iPhone" because an error occurred while sending data from the iPhone." After rebooting the desktop, the error repeats, and it's now in hour 2 of the continuing message "Syncing Steve's iPhone (Step 2 of 2) - Finishing sync"
Has anyone else run into this Undocumented Feature of the latest upgrade?
As bugs go, this is pretty serious for those of us who depend on syncing the iPhone and desktop for our business!
Thanks to anyone who can help!
Steve CallenderTried rebooting the phone, and now it works.
Guess there's 2 lessons here -
Boot again when installing new SW, even if the phone reboots itself during installation, and
Boot to see if that fixes a problem before posting it.
Steve -
Using ABAP DATA FLOW to pull data from APO tables
I am trying to use an ABAP Data flow to pull data from APO and receive error 150301. I can do a direct table pull and receive no error, but when I try to put it in an ABAP data data flow I get the issue. Any help would be great.
Hi
I know you "closed" this, however someone else might read it so I'll add that when you use an ABAP dataflow, logic can be pushed to ECC - table joins, filters, etc. (Which can be seen in the generated ABAP).
Michael -
Incoming IDOC Error "No batch input data from the screen SAPMV45A 4001"
Hello ,
The Incoming IDOC with Message type 'ORDERS' is triggering the error message "No batch input data from the screen SAPMV45A 4001" with message no 00344 . There is an SAP note 785000 to handle this type of error message which has been already implemented. Still we are encountering few IDOC error's at the time of sales order creation. The IDOC reaches status 51 throwing the error which is again reprocessed through BD87 .
We are unable to replicate the similar scenerio in Development & Testing systems as it works fine.
Can any one kindly advise how to eliminate the error "No batch input data from the screen SAPMV45A 4001" message at the time of Incoming IDOC processing.
Thanks in advance.
Best Regards
SateeshDear Sateesh
Check this link where the same topic was discussed
[ VA01/VA02: batch-input error in IDoc processing|http://www.sapfans.com/forums/viewtopic.php?f=21&t=313032]
thanks
G. Lakshmipathi
Maybe you are looking for
-
Upgrading PeopleSoft and Risks with Custom Development
My company's parent is on PS 8.8, and is trying to bring my company into their system. To do this, they are going to have to do a lot of custom development surrounding labor-based project costing. From some of the PeopleSoft developers, I am hearing
-
Indesign CS3, a FreeHand flavour?
With this new version of Indesign, we, FreeHand lovers, won't be upset by the new indesign interface. Take a look
-
Computational Ability to Handle Super Big Excel Files
My son lives overseas and is in the business consultancy business. He will be visiting us in the USA next week and plans to buy an iphone (if there are any available). He is a committed PC user but is getting frustrated with the computational slownes
-
Avidemux audio sync problem with MPEG-2 - alt. way to cut mpeg-2
I have a PVR-250 and when I load up an MPEG-2 file that it generated in Avdimux, the audio/video is out of sync (before I make any edits). My goal is simply to cut out commercials in the file, nothing else. When I play it in any other viewer (vlc, m
-
I by accident downloaded something call geniel. How can I get rid of it?
I by accident downloaded something call geniel. How can I get rid of it?