Error Message in Status bar

Hi ,
i am getting an error message in pop-up box ,can we show this same error message in status bar..?
Thanks.

Hi shiva ,
data : dtype type c value 'S'.
MESSAGE E053(z4) DISPLAY LIKE dtype.
my code is like that,but still it shows in popup window.
can you check it once...?
Thanks

Similar Messages

Invoking my own error message in Status bar

Error message is white text over red background in Status bar of SBO.
I need to add a form and invoke some error messages for it.
For example, if some fields of the form are not complete, "Incomplete fields" message should be shown before adding data to DB.
How can I make my own error message and get it appear in status bar?

The SetStatusBarMessage method of the Application object lets you do this. Details are in the UI help file.
e.g.
sboApplication.SetStatusBarMessage "Hello world!", bmt_Long, False
John.

Linkinking error msg on status bar and a popup window

Hi
My requirement is that whenever an error msg comes on status bar after execution,i need to double click
on that error msg and followed by that a popup window should appear with the customised details about error msg.
plz suggest some solution or some function module which gives popup on double clicking on error msg.
Thanks in advance,
Arya.

Hi,
my question is that this popup should be populated by customized details i mean suppose error message on status bar is asking 'authority scheck for one or more plants have failed.would you like to see the details'.Now if user double clicks on status error message pop up screen should contain all the plant numbers for which authorization has failed.I hope this clarifies my question.
thanks

Display a message in status bar when error in a block based procedure

Hi
I have a block based on procedures.
If I have an exception when I try to insert a record for example, how can I display a user friendly message in the status bar ?
here is my insert procedure :
PROCEDURE emp_insert2(t IN emptab) IS
BEGIN
    FOR i IN t.first..t.last LOOP
    INSERT INTO emp (empno, ename, job, hiredate, sal)
    VALUES(t(i).empno, t(i).ename, t(i).job, t(i).hiredate, t(i).sal);
    END LOOP ;
EXCEPTION
    When DUP_VAL_ON_INDEX then
        Raise_Application_Error( -20002, '^This identifier already exists^' ) ;
END emp_insert2;When I use the ON-FORM trigger and ERROR_CODE and ERROR_TEXT variables, I get an FRM-XXXX message saying :
40735--INSERT-PROCEDURE trigger raised unhandled exception ORA-00001.
I want a message like :
ORA-20002 This identifier already exists

Hello,
ORA-20500: ^This identifier already exists^ ORA-06512: à "SCOTT2.EMP_PKG", ligne 48
I cannot figure out what is the problem described by the second part of the message.
why numeric or value error in this case ? ( ligne 48 corresponds to the raise_applicaion_error instruction )There is no problem with the second part it is just for showing the line number it not the numeric or value error the code for numeric or value error is ORA-06502. See the below link for more information
http://www.techonthenet.com/oracle/errors/ora06512.php
So, now you can display your customized message in status bar using the error code which you defined in RAISE_APPLICATION_ERROR like below...
DECLARE
     errcode VARCHAR2(50) := DBMS_ERROR_CODE;
     errtxt VARCHAR2(1000) := DBMS_ERROR_TEXT;
BEGIN
     IF vErrCode='-20500' THEN
        MESSAGE('Here display your customized message.');
     ELSE
        -- Handle the rest errors...
     END IF;
END; -Ammad

Sending An Error Message as Status Message

Hi,
I have a selection screen which was (Object Oriented program ) defined through Function Group and calling via Function Module. when the transaction Starts with selection Screen and we have few buttons on the selection screen, when we enter data and we need to press F9 we are validating the data and we need to give an error message, i am doing same, but the error message was coming as pop-up, once i click on the pop-up it is getting out of the selection screen. but actual requirement was it has to stay
back on the selection screen.
Is there any way to give the error message as status message instead of
pop-up.
Thanks In Advance.
Regards
Nags

Hi,
We have an option to set this, the last button of the menu(button will be in multiple colors) , press that and select the settings, a pop up will open, there in one of the tab, you can select the option to display the mesage in the status bar
Regards
Sudheer

How to pass message in Status Bar

How can I pass message in status bar.
I typed bellow line but get some error.
void itemFileOpen_actionPerformed (ActionEvent e) {
statusBar.setText(" need Help ");
Error: (456) method setText(java.lang.String) not found in class oracle.dacf.control.swing.StatusBarControl.
Warning: Deprecated APIs are used. Please recompile with the 'deprecation' option for details.
null

Sergio,
Even though your form is based on the Apps Template form, double-check to ensure it has all of the triggers it should have, like the Form level Key-Commit. The easiest way to make this comparison would be to open your custom form and then open one of the EBS forms like "ARXCUDCI". If your comparison shows no significant differences you might be dealing with a situation when the message is displaying in the Console (status bar) but something else is clearing the console. Check for any Clear_Message calls.
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly

SAP GUI 7.20 and Animated Messages in Status Bar

Hello Experts,
Is there a way to disable "animated" display of messages in status bar when Signature Design is active? Currently messages are scrolled from left to right and then fade in. (Please note that this is a different from "Animated Focus" or "Animation" feature and only unique to Signature Design Theme). It would be nice to disable the animation so messages are immediately displayed without disabling Signature Design. I have asked this question in the past and there was basically no way to accomplish this. Is there any hope that this would be included in future patches for SAP GUI 7.20?
Thank you!
Abdul

Daniel,
Have you had any luck with this issue? We recently installed SAP GUI 7.20 patch 2 and are having similar issues. While working in t-code SWDD, "Workflow Builder", I am automatically logged out of SAP and the LOGON pad also closes out and I forced to sign back in. This is happening when I drag and drop an event into a step and enter in information that should normally prompt a warning/error message after hitting the "Enter" key.
Thanks in advance.
Edited by: Michael Kostek on Oct 7, 2010 9:11 AM

MR11 error message system status CLSD is active

MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .

If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status.

ALV Report - Field Overflow message in status Bar

Hi
I am trying to display ALV report , ALV report is displaying fine but on execution of report , an message in status bar is coming as "Field copy Number can not be totalled because of field overflow."
Can anyone tell why such messgae is comming?
Thanks,
Debadatta

Just a wild guess, treat the below as an example.
Eg:
assuming one field in the output is of length 2 type i.
values: 20, 30, 60, 45.
Totalling the values result as 155. but due to the length of the field as 2. We can encounter the overflow message.
Considering the above example, manually total the values of your numerical columns and see if any of the column is execeeding the specified length.
Regards
Eswar
Note: Reward if you find the info useful.

FM to display warning message at status bar

Hi,
can any body give me the FM to display the warning message
at status bar.
Thanks in advance

Hi,
To give a warning message , you dont need any function module. You can use the keyword 'MESSAGE' and give the type as 'W'.
Do a F1 on the keyword MESSAGE for further details.
regards,
Advait

Supress message in status bar when using Call Transaction

Hi,
I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
As this was a Flowrack storage type we will assign Source HU during TO confirmation. So I went for a BDC.
But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
Please let me know for more information.
Thanks,
Manoj.

>
kaka79 wrote:
> I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
> But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
> I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
The CTU (CALL TRANSACTION ... USING ...) captures and stores all the messages into the message internal table (... MESSAGES INTO itab ...), but they are not displayed. So, if one of them appears in the status bar, it's because there is an additional MESSAGE ... statement in the program using the CTU. So look at it and add a condition before the MESSAGE statement to not output this exact message (click the message on status bar to get the message number, or debug the program to get it from the message internal table).

Send comments gives the error message "Submission status must be modified"

Hi,
When I want to send comments I get the error message "This cell cannot be updatëd. Submission status must be modified to allow changes."
The work status is still unlocked for this period. It has something to do with authorizations.
We have users in teams with a data entry profile. These users have the "AddComment" task in their profile.
They are not able to send comments.
When I add these users to a team (being the owner of the parent entity) than they can send comments.
The problem is that in this way they can approve, luck and unlock periods which is not allowed.
How can I solve this problem?
Please help!
With kind regards,
Robert Nijsink

Hi there,
I changed the work state for comments as follows:
- Unlocked / <all>
- Submitted / <all>
I still get the same error message: "Submission status must be modified to allow changes"
The combination of a team being "Owner" of the parent with "data entry rights" is working properly.
What do I miss?
Regards,
Robert

Regarding message in status bar

Hai SDN members , i have to display message in status bar , my requirement is like this ,ihave three fields in gui screen 1 is shipment num ,2 is shipment type and 3 is packing ref . and if i give the input in this three fields ,then the shipment number should be displayed in status bar

hi,
u want message after pressing some button or enter?
u need to write this in USER_AOMMAND module of PAI, in when case..
like
when 'SAVE'.
MESSAGE s000(zmsg_fmtr) WITH srn.
here zmsg_fmtr is my message class
and this is my 000 message in that mssage class
Record Saved Successfully with Serial Number &
in place of & my passing parameter (srn) will come on status
reward if usefull...

Error message - HTTP Status 500 -

sir,
i deployed my struts application using simple form bean and am getting the error message HTTP Status 500- . please guide me to solve this problem. im presenting you the source code i had written. please kindly check this and give the solution.
this is the login.html
<html>
<body bgcolor=#23533234>
<center>
<pre>
<form action=login.do>
<font size=10 color=pink>welcome</font>
<font size=5 color=pink>
username:<input type=text name=un>
<br><br>
password:<input type=password name=pw>
<br><br>
<input type=submit value=G e t    I n>
</font>
</form>
</pre>
</center>
</body>
</html>
this is the AdminHome.jsp
Response from AdminHome page
this is the UserHome.jsp
Response from UserHome.jsp
this is the LoginModel.java
package com.nit.struts;
public class LoginModel
public String validate(String name,String pass)
if(name.equals("user1")&&pass.equals("pass1"))
return "admin";
this is the LoginAction.java
package com.nit.struts;
import javax.servlet.*;
import javax.servlet.http.*;
import org.apache.struts.action.*;
public class LoginAction extends Action
public ActionForward execute(ActionMapping am, ActionForm af, HttpServletRequest req, HttpServletResponse res)throws Exception
UserDetails ud=(UserDetails)af;
String uname=ud.getName();
String upass=ud.getPass();
// String uname=req.getParameter("un");
// String upass=req.getParameter("pw");
LoginModel lm=new LoginModel();
String user_type=lm.validate(uname,upass);
if(user_type==null)
return am.findForward("fail");
return am.findForward(user_type);
this is the UserDetails.java
package com.nit.struts;
import org.apache.struts.action.*;
public class UserDetails extends ActionForm
public void setName(String s)
un=s;
public void setPass(String s)
pw=s;
public String getName()
return un;
public String getPass()
return pw;
String un,pw;
this is the struts-config.xml
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE struts-config PUBLIC
"-//Apache Software Foundation//DTD Struts Configuration 1.3//EN"
"http://struts.apache.org/dtds/struts-config_1_3.dtd">
<struts-config>
<form-beans>
<form-bean name="userform" type="com.nit.struts.UserDetails"/>
</form-beans>
<action-mappings>
<action name="userform" scope="session" path="/login" type="com.nit.struts.LoginAction">
<forward name="fail" path="/login.html"/>
<forward name="admin" path="/AdminHome.jsp"/>
<forward name="user" path="/UserHome.jsp"/>
</action>
</action-mappings>
</struts-config>
this is the web.xml
<web-app>
<servlet>
<servlet-name>first</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<load-on-startup>0</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>first</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>login.html</welcome-file>
</welcome-file-list>
</web-app>
if(name.equals("user2")&&pass.equals("pass2"))
return "user";
return null;
*this is the

type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: java.lang.NullPointerException
     org.apache.struts.action.RequestProcessor.processException(RequestProcessor.java:545)
     org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:486)
     org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
root cause
java.lang.NullPointerException
     com.nit.struts.LoginModel.validate(LoginModel.java:7)
     com.nit.struts.LoginAction.execute(LoginAction.java:18)
     org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

Weird message below status bar - icons move down and almost touch dock

Ever since installing 3.0 on my 3g iphone I've had a weird problem. Roughly around an hour or so after the phone is on, the icons on the page move down (about an 1/8 of an inch) and the words "Revisar ADN" appear below the status bar. A little bit later the message will go away but the icons will remain shifted down. The only way to fix it is to turn the phone off and back on again, but again, roughly an hour later it happens again.
I have restored several times but to no avail.
Some more info about the situation: I purchased and activated the phone in Guatemala (where I live) and my carrier is Claro. The words "revisar ADN" mean "check DNA" in english. The phone is not jailbroken or anything like that. Even though the carrier is Claro, the international settings are in English with the exception of the spanish language added to the keyboard. I've had the phone for about 6 months and on 2.2.1 never got this message.
Any help would be appreciated.

Thanks so much for the information and the investigation on this (I saw you posting in other forums as well). Through some trial and error I think things are working finally. Here is the story for anyone else that might suffer from the same problem.
I originally tried the SIM trick and took the SIM out, put it into another phone, added a contact, and then put the SIM back in. This unfortunately did not work. A few hours later the icons had moved again. I then noticed that the contact that I had added to the SIM was not in my iphone address book, so I imported the contacts from the SIM (Settings>Mail, Contact, Calendars>Import Sim Contact), hoping that this would fix the problem. That didn't work either. I turned the phone off and on again, and that didn't work either.
Then I began to look into the "Claro Contactos" issue, and went looking for the SIM Applications (Settings>Phone). Now, I am almost positive that when I looked here earlier that day the SIM Applications button was not there. Maybe it was, but I'm thinking that by putting the chip into another phone and then putting it back into the iphone, this "unlocked" this feature. Or maybe it was the simple act of taking it out and putting it back in. Either way it was there now. I had never heard (or turned on) Claro Contactos so I went hunting for where to turn it off. After finding it "Utilidades Claro" it popped up a message asking if I wanted to turn it on. Obviously I had not used the feature before so I couldn't turn it off like the previous post had suggested. So I did the opposite and turned it on. I then touched the button "Respaldo Contactos" to back up that one contact to this service and then touched the button "Respaldo Automatico" and told it NOT to back up automatically. After doing all of this, I turned the phone off and on again, and now everything has been fine. It's been a full day and my icons are right where they should be.
I mention the process because I'm not totally convinced that just by turning the Claro Contactos on was the issue. I think the whole process is the solution. Maybe someone else that has the same issue can try the process, but backwards and see if just switching the Claro Contactos on (or off) solves the problem.
Thanks for the help and I hope this helps whoever else might have the same problem.

Error Message in Status bar

Similar Messages

Maybe you are looking for