Error message just after start up

I am getting the error message 'driver power state failure' just after start up on around 50% of occasions. The computer restarts after displaying the message then it's OK.  I have tried to do a system restore which just hung. I have refreshed the main drivers given under recovery to no avail. Although this error seems to be associated with a driver problem I dont know which driver it is. The next step might be to do a Windows 8 refresh but I want to avoid it if possible in case it just hangs and anyway would rather not reinstall the programs Ive installed. The computer was bought about a month ago only.

I see you are getting the message 'driver power state failure' when starting the computer.
I found a url which will guide you in fixing this issue by updating the drivers.
http://driverpowerstatefailure.blogspot.ca/
To access the device manager in win8 I have provided the url below.
http://clientportal.softwaresecure.com/support/index.php?/Knowledgebase/Article/View/288/0/windows-8...
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • "You need to restart your computer....." message just after starting snow leopard instalation on clean disk

    Dear All
    I try to install snow leopard on clean disk of my mac pro but after some seconds of processing, before any menu appears I get error message, saying I need to restart computer. I tried all suggestions I could find, but nothing is working. Would you advise please, what may be the problem cause?
    Appreciate any help.
    Best Regards
    Bartosz

    You need to be running 10.6.6 to 10.6.8 to get the Mac App store.
    Access to the Mac App Store would let you download (or re-download) 10.7.
    So, YES, a retail 10.6 DVD would solve the problem.
    Do you have another Mac?
    There are a few more things you could do using another Mac:
    1) you could hook up another Mac in FireWire target disk mode, and clone its drive onto yours. That could get you going IF the version installed on that other Mac is a separatley Purchased version.
    2) You could copy the Recovery_HD from a Mac with a separately Purchased version of 10.7, and then use it to download a copy from the Mac App store.

  • IMac stalls/freezes just after Start Up

    Hi
    I'm getting the following message just after Start Up:
    "Libray/StartUp items/Adobe Version Cue" has not been started because it does not have the proper security setting.
    The mouse works ok. The Dock works ok but I can't open any applications, files or folders.
    I have restarted the iMac but it keeps stalling at this message.
    What is the fix for this?
    Thanks in advance for any and all help.
    Neil

    try booting into _*safe mode*_, then rebooting normally.
    JGG

  • When starting Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message.

    When starting up Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message?
    The error message is: what happened: Type Error: Components. classes ['@mozilla.org/extensions/manager;1'] is undefined.
    It appears all the time already from the beginning after installing Firefox 4.

    Thanks a lot. The Ask toolbar created this problem. Another problem is: When searching on the web via Google, normally it is possible to type a few letters and then look what appears and then click on the wanted word(s). A number of word(s) ineed do appear, however it is not possible to select any of them as ws possible as mentioned in olders versions.

  • "Adobe Illustrator cs5 quit unexpectedly" error message. After I upgratded my imac to Mavericks I can't open Illustrater CS5. Help pls.

    "Adobe Illustrator cs5 quit unexpectedly" error message.
    After I upgrated my imac from Snow Leopard to Mavericks I can't open Illustrator CS5. (No problem with PS)
    Every opening attemp crashes. May this be possible because of third party plug-ins. (eg. Esko Artwork)
    Help pls.
    Thank you.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
    DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    ☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    ☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Error Message " Unable to start Intel My WiFi Technology"

    Setup: Lenovo W520 on Windows 7 Pro
    After Lenovo Software Update, the Intel WiDi was updated.  
    Then I run the program " Intel WiDi". I received an Error Message " Unable to start Intel My WiFi Technology"
    I try to troubleshoot and did the following
    1. Uninstall WiDi in the "Control Panel". However, i received an error message from Windows Installer --"Error opening installation log file. Verify that the specified log file location exists and is writable"
    Any suggestions on how to reinstall the Intel WiDi

    Did resolve it also! But NOT with the LENOVO UPDATE!!!
    Take a look at this Intel webpage:
    http://www.intel.com/support/wireless/wtech/iwd/sb/CS-031109.htm
    it describes what we must do to get it running!
    1. I did download the new PROSET WiFi and the WiDi driver
    2. deinstall the WIDI and PROSET Wireless drivers from LENOVO
    3. then intall the new drivers from INTEL in the order described above!

  • Received error message Microsoft Word starter 2010 cannot be opened. Try again or repair the product

    I received an error message today in the click-to-run application manager box that read: Microsoft Word Starter 2010 cannot be opened. Try again, or repair in control panel. At this point nothing seems to work. HELP.

    if you bare receiving error message Microsoft Word starter 2010 cannot be opened. For this you need to make use of MS Word Repair Tool.  Word File Repair Tool which is especially designed to repair and recover corrupt or inaccessible (.doc) and (.docx) files back. It extracts the content from the file and rebuilds a new healthy word file that you can access easily. It effectively recovers document texts along with its other important stuffs like indentation, formatting, charts, hyperlinks, images, tables etc. This powerful tool even repairs the severely damaged DOC files in seconds and save you from great disaster in work. So just download DOC Repair Tool straight away and repair & restore your Word files in seconds. 

  • HT4059 I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't

    I got an error message that I should connect to Wi-Fi after trying to download a Book Sample from the iBooks Store. I still get this error message even after I bought, downloaded, and transferred the file to my iPad's iBook thru iTunes. Wi-Fi ain't cheap.

    Hi I had a similar issue to you, I could connect to the router but no internet. Here is my explanation of how I sorted it.....I hope this works for you.
    *To anyone that is reading this it appears that the problem lay in the airport setting: IPV6: set to 'Automatically'. I turned it off (after reading someones plight on MacFixIt) & everything is back to normal.*
    *The worrying thing is although my problem was extreme with other computers on the network being locked out nothing was changed, one minute it worked the next it didn't. Reading on other forums it appears to be a problem with laptops (but I could be mistaken). A lot of people on the Macfixit forum are complaining of network just dropping out even when they are next to the router.*
    *I hope this is the fix (although I dont know why it suddenly went to sh*t!) & I hope my hair pulling & trawling the forums can help someone else out.*
    Much Respect
    Lammo

  • I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What ?

    I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What does it means please provide me solution ASAP

    Israr,
    Then error indicates that the primary battery (the one you can remove and replace) has a hardware failure.  You should run Battery Check in HP Support Assistant.
    Wes
    I am an HP employee.

  • TS1292 I bought a 4 pack of $25 Itunes gift cards and only 2 will activate.  For the second two it just keeps asking for my login. No error message just keeps repeating the login

    I bought a 4 pack of $25 Itunes gift cards and only 2 will activate.  For the second two it just keeps asking for my login. No error message just keeps repeating the login.  Is there any way to fix this or did I just lose $50

    Report this here:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • While installing OD XE 11 g, I get error message just before finish

    the message is like couln't get data local {7e-ie-....) XE registration.
    I have downlaoded the zip file for win 32.
    i was told that this prg will install in my 64 bit OS (Windows 7).

A: While installing OD XE 11 g, I get error message just before finish

Hello, and welcome to the OTN forums!
i was told that this prg will install in my 64 bit OS (Windows 7).Who told you that, and why don't you ask him/her why it didn't work? (just kidding...)
In fact, XE 11.2 is currently not supported on 64 bit Windows machines. See the [url http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#BABHICJH]System Requirements documented in the Installation Guide for XE 11.2.
The error you receive has been reported often when people tried to install on 64 bit anyway. There are workarounds for that issue, e. g. described in this thread: {thread:id=2289186}
-Udo

Hello, and welcome to the OTN forums!
i was told that this prg will install in my 64 bit OS (Windows 7).Who told you that, and why don't you ask him/her why it didn't work? (just kidding...)
In fact, XE 11.2 is currently not supported on 64 bit Windows machines. See the [url http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#BABHICJH]System Requirements documented in the Installation Guide for XE 11.2.
The error you receive has been reported often when people tried to install on 64 bit anyway. There are workarounds for that issue, e. g. described in this thread: {thread:id=2289186}
-Udo

  • I can no longer login to Dell Premier! No error message, just bounces back to login. Works fine with IE and Chrome

    For the last couple of version of Firefox my Dell Premier login does not work any more. No error message, just stays at the login page!
    I cleared cache. No difference!
    Any ideas?

    I have had exactly the same problem for several months - and my Javascript is set to on, so that's not the solution.
    It drives me nuts - one of the main reasons I bought an iPhone was to access my work email outside the office, and I can no longer do that. I would be extremely grateful to anyone who knows the solution!

  • Latest version of Firefox is having problems loading sites, it tries to load to Google Analytics. No error messages, just a page that won't load. How do I stop this?

    Latest version of Firefox is having problems loading some sites, it tries to load and then gets taken over trying to load Google Analytics. No error messages, just a page that won't load. How do I get rid of this, it is a "pain in the neck"
    == URL of affected sites ==
    http://

    I just spent 3 days with this issue as well. I finally fixed it by reluctantly adding yet another add-on called ADBLOCK
    I was able to selectively block google-analytics. Now pages that weren't loading before are now loading.
    eg vimeo.com starbucks.com & other random sites.
    This was a tough one to fix because there is NO ERROR MESSAGE..page just shows it's loading...forever..& the bottom of my browser says 'waiting for google analytics'. I finally figured out google analytics is the culprit. Ironically, some help pages in trying to find a fix wouldn't load for me due to google analytics arghhh!
    Im on a macbookpro & Safari worked fine for these same sites. It was just Firefox. I nearly switched back to Safari because of this stupid issue.
    I'm wondering if this was caused by recent firefox 'updates'...

  • Getting error message -050 after downloading 11.1

    Getting error message -050 after downloading 11.1, radio and match do not work.

    What is the version of your OHS. Are you referring to 11gR2 webgate for OHS ?

  • Error  message 16 after install

    I have error message 16 after installing Photoshop CC and LR 5. I've tried uninstalling and re-installing. I have a MacPro running Mavericks. Any ideas?

    well, it was worth a try...Any other suggestions?  It still isn't working.

    • Maybe you are looking for