Error message NIPathDir property while installation

Hi,
we are facing an error while installation of Lab VIEW 8.2.1 on windows vista. Each time an Fatal Error message appears ;
"fatal error NIPathDir property....is undefined"
Please tell me the solution for this error.
Thanks
Altaf

Hi Altaf
I found following entrys which may help you fixing the failer.
Why Do I Receive a 'Fatal Error: Required NIPathsDir ...' Message when Running a National Instruments Installer?
http://digital.ni.com/public.nsf/allkb/FEC14156DCF364908625733E004E7A01?OpenDocument
Dont know if you have a 64 bit version of windows vista:
Installing LabVIEW on Windows Vista x64 Edition
http://digital.ni.com/public.nsf/allkb/E9B4EA0143514DCB8625725D0050680A?OpenDocument
post bag with your emprovement
Lars

Similar Messages

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

Export release build failed with an error message: complilation failed while excuting : compile-abc

I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem. But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc.
I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
Here is the command line:
compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?

Still having similar issues - seems to be when I embed an image - but works for every release except for release build
Tried your work around but doesnt seem to make a different
[Embed(source = "/../assets/[email protected]")]
protected static const ATLAS_IMAGE:Class;
[Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
protected static const ATLAS_XML:Class;
[Embed(source = "/../assets/iconMap.png")]
protected static const ATLAS_IMAGE_LOW_RES:Class;
[Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
protected static const ATLAS_XML_LOW_RES:Class;
if(Starling.current.viewPort.width > 320)
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));
}else{
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));

Received error message 213:11 upon installation of CS5.1 upgrade in Windows 7, unable to change SLStore to read only as administrator

Received error message 213:11 upon installation of CS5.1 upgrade from CS2 in Windows 7, unable to change SLStore to read only as administrator as suggested elsewhere. SLSstore reverts to read-only after changing, applying and clicking OK. Same problem after reinstallation.

Gregconn please see Error "License store does not allow writing" | Install log | CS5, CS5.5 for information on how to resolve error 213:11.

Hi there, i erased my macbook and trying to reinstall it, i keep getting an error message"could not find installation for this machine" please what can i do?

Hi There,
I erased my macbook and trying to reinstall it, i keep getting an error message "could not find installation for this machine" what must i do please?

It is the internet connection.
Try again or another internet connection.

I'm trying to install Creatice Suite 5.5 on a new Mac but I get the error message "Inconsistency in the installer database. Please restart your computer and install again."

I'm trying to install Creatice Suite 5.5 on a new Mac but I get the error message "Inconsistency in the installer database. Please restart your computer and install again."
I have restarted but that doesn't help.

Jonkpirateboy did you migrate/transfer/copy your CS5.5 application to this new Mac?
If so then please utilize the uninstallers located in the Applications/Utilities/Adobe Installers folder. You will then want to run the CC Cleaner Tool located at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
Finally if you need a fresh copy of the installation files they are available for download at Download CS5.5 products.

I am trying to install Indesign 2014 but am not able to complete it because an error message (EX11) appeats while extracting

I am trying to install Indesign 2014 but am not able to complete it because an error message (EX11) appears while extracting

Without system info and other details nobody can tell you much. This simply means that you run out of (temporary) disk space, maybe because the drive is really full, maybe because you have insufficient user privileges...
Mylenium

Tiger installation fails-Error Message 'there areerrors while installing'

Hi there!
I have just bought a new Tiger 10.4 full version (4 cds) and tried to install CD1 but everytime, i pass the disk verifying of CD 1 , then when it installs on the HD, i get an error message saying 'there were some errors while installing to your hardrive' .... everytime i have to reboot on older version Mac OS 10.2.8
Any help highly appreciated! Thanks
Apple G4 IMAC Mac OS X (10.2.x) 60 gb

Two things to try before trying to install Tiger. One, boot the machine with the Apple Hardware Test disk and run the extended tests. If any problems pop up, then you'll have to fix those first. Once you get a clean bill of health on the hardware, boot with the Tiger install disk, select your language, and, when the menu bar pops up, select Disk Utility->your HD, and repair the disk. If that works, then try the upgrade again.
BTW, are you upgrading a 10.2.8 backup or are trying to do a clean install?

Error message is showing while connecting to itunes - "This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit version of itunes - Pls Help

I tried to install in my Sony Vaio Laptop - Model Name SVF15218SGW Serial No 54****************954. After installation of itunes, when i am trying to connect error message is showing as follows -
"This iphone cannot be used because the required software not installed. Run the itunes installer to remove the itunes, then install the 64bit version of itunes".
i already installed 64bit version. but not connecting my iphone with itunes
PLEASE HELP.!!!!
<Personal Information Edited by Host>

Hello Negaz
When you uninstalled iTunes, did you uninstall it by using the article below or just uninstalled iTunes? The best practice is to remove not only iTunes, but also other associating software in the order that the first article give. If that does not work, then check out the second article for more troubleshooting options for connecting your iPhone to your computer.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

No error message is displayed while deleting an attendee from a course.

Hi Experts,
Mu customer is facing problem while trying to delete an attendee from a course under Training and event management. The path he is following is right:
1) In PSV1(Dynamic Attendance Menu)the employee is seen firmly booked in
a course.
2)Right-click on his name and select cancel
3)Click the dustbin to remove
But nothing is happening, neither the employee is getting moved from the course nor any error message is displaying giving us any indication of what can go wrong. Can you please suggest what can be the possible problem?
Strangest thing is, this problem is occuring only for one employee.
Thanks and Regards,
Toa

Hi Manoj,
Thanks for your reply.
That is the problem, no error message is showing. When the delete button is pressed, neither the attendee is getting deleted nor any error message is displaying as of why the deletion is not occuring.
FYI: The employee is not locked.
Thanks,
Toa

Error message in Business Content Installation

Dear All,
I am getting one error message while install some objects in FI through Business Content.
Object '0GL_ACCOUNT_T011_HIER_EC1' (ISTS) of type 'Transfer structure' is not available in version 'A
I have search around but I dont find any related to it.
Please suggest.
Thanks

Hi,
Exactly what your trying to activate?
info object or data source?
Use grouping option as - only necessary object and drag required object form middle pane to right side pane.
try to install it. If it shows any dependences then those first need to install.
above mentioned name is GL Account master data source hierarchy.
Thanks

Error message...while accessing the BEx Web Analyzer on EP7

hi experts,
i have deployed and configured BI java on portal server.and while accessing the roles from portal(ep7) ,for the BEx Web Analyzer getting the error message as shown below.but the other two i.e. planning wizard and planning modeller are running fine.is there is some problem while configuring or while deploying files on the portal server..please help me in this case.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.ip.bi.km.base.
Exception id: 10:32_28/02/08_0069_19249950
See the details for the exception ID in the log file

Hi Rohini,
Let me know, have you got the right authorization to do this transaction. Check your profile, if you are using for a long while, check whether you have changed any user settings.
Good luck
Om
Reward it, if u feel helpful.

Trying to uninstall itunes 11.0.4 from my Windows 7 computer. I get an error message that say "This Installation package could not be opened. Contatc the application vendor to verify that this is a valid windows installer package. Any solutions???

Trying to uninstall itunes 11.0.4 in order to update to the most recent itunes. I get an error message that say..."This installation package could not be opened. Contact the application vender to verify that this is a valid windows installer package.

Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error message on first time installation of iTunes 10.2.2

Trying to install iTunes 10.2.2. on a laptop that has never has iTunes. I get error message: "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact you support personnel or package vendor". It goes on to install QuickTime and iTunes but neither will run as their .exe files seem to be missing. Have tried uninstalling and re-installing (4 times), running as administrator, disabling anti-virus and firewalls but no success. Any further offers? Thank you.

You can try the following:
1. Use the Control panel > software uninstall > to remove Quicktime, Bonjour, Apple Software Update, Apple Mobile Device Support, and iTunes if they are there.
2. Search on the internet for the MS Installer Cleanup Utility (it's supposed to be discontinued but you can still down load it elsewhere - msicuu.exe - and install it.
3. Run the Cleanup utility as an administrator and look in the list of programs to see if any of the above programs are still listed. If so, uninstall them with the utility. (Be careful! Don't select all the programs in the list you get - that deletes all installed programs. Only do the Apple ones listed above)
4. Open cmd.exe as an administrator. Type "netsh winsock reset" and press enter.
5. Reboot
6. Download a fresh copy of iTunes 10.5 from www.itunes.com and install.
7. If all this works, you can uninstall the Install Cleanup Utility if you like.
Hope it works.

Error message NIPathDir property while installation

Similar Messages

Maybe you are looking for