Error Message: Objects Extending Beyond Addressable Area

I've created a simple line graph and when I go into change some settings I get the following message. All I'm changing is the: Category Axis, deslecting the "Draw tick marks between labels" and on the Value Axis, I'm using the Override Calculated Values and changing them to Min: 0, Max: 40, Divisions 9, currently the number range from 0 to 1,500,000.
Can't set the graph style. The requested transformation would make some objects extend beyond the addressable area.
Any ideas would be greatly appreciated. I can make the changes I want if I want to ungroup the graph, but then I'll lose the connection to the data, type, etc.
Thanks,
Peter

AI doesn't like numbers that large. You'll have to do it as a scaled number and change it on a copy of the file or in the axis title, label it as thousands or millions of units.

Similar Messages

ERROR: Partition 4 extends beyond the end of the disk

Hi,
I'm trying to install Solaris 10 on my x86 laptop. Everyting is OK until the start of the installation and as I try to start the installation it prints an error message:
ERROR: Partition 4 extends beyond the end of the disk
Output of sfdisk -l /dev/hda command is as follows:
Disk /dev/hda: 155061 cylinders, 16 heads, 63 sectors/track
Units = cylinders of 516096 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/hda1 * 0+ 20798- 20799- 10482381 c W95 FAT32 (LBA)
end: (c,h,s) expected (1023,15,63) found (1023,254,63)
/dev/hda2 20798+ 20829 32- 15907+ be Solaris boot
/dev/hda3 20830 53565 32736 16498944 bf Unknown
/dev/hda4 53568 155060 101493 51152472 f W95 Ext'd (LBA)
start: (c,h,s) expected (1023,15,63) found (1023,33,1)
end: (c,h,s) expected (1023,15,63) found (1023,80,63)
/dev/hda5 53568+ 138900 85333- 43007800+ 83 Linux
/dev/hda6 138901+ 142869 3969- 2000344+ 82 Linux swap
/dev/hda7 142870+ 155060 12191- 6144232+ 83 Linux
I'm trying to install boot partition on /dev/hda2 and the Solaris on /dev/hda3.
Is there any way to overcome this error without repartitioning the disk ?

I agree that there is no obvious error from the data you've provided.
What version of Solaris are you running
uname -a
Are you using a SCSI disk or a SATA drive?
On Solaris it affect which driver we use.
I've very curious what the geometry stored in the Solaris disk label is.
Would it be possible for you to dump the fdisk partition table
and the Solaris disk labels and vtoc and send them to me.
dd if=/dev/dsk/c0d0p0 of=/tmp/mbr count=1
dd if=/dev/dsk/c0d0p2 of=/tmp/pbr count=3
[email protected]
As a workaround:
Since partition is 82 is a linux swap partition, it should be relatively easy to
shrink that partition by a few cylinders and then run makeswap
with no loss of information.

Jumpstart - ERROR: The '/' slice extends beyond HBA cylin

I'm working on Jumpstart configurations for Solaris 10 8/07 on i86.
When I test an install with pfinstall:
/usr/sbin/install.d/pfinstall -D -d disk.cfg -c /export/Solaris_10 profile_i86minIf I use *"partitioning default"* the installer clearly makes the / filesystem larger than 1024 cylinders:
Disk layout for selected disks
    Disk c1t0d0
                  fdisk Partition Table
          Partition    Offset    MB    Type
                  1      4096 8188     130
                  2         0     0     100
                  3         0     0     100
                  4         0     0     100
                             Solaris Slice Table
          Slice     Start Cylinder         MB Preserve Directory
              0       257      2225       4450        no /
              1      2482        60        120        no /var
              2         0      4092       8184        no overlap
              3      2542       151        302        no /export
              4      2693       111        222        no /export/swap
              5      2804        13         26        no /opt
              6         1       256        512        no swap
              7      2817      1275       2550        no /export/home
          Usable space: 8182 MB (4091 cylinders)   Free space: 0 MBHowever if I try to define the partition in the profile I get the following message:
Disk layout for selected disks
    Disk c1t0d0
                  fdisk Partition Table
          Partition    Offset    MB    Type
                  1      4096 8188     130
                  2         0     0     100
                  3         0     0     100
                  4         0     0     100
                             Solaris Slice Table
          Slice     Start Cylinder         MB Preserve Directory
              0       257      2225       4450        no /
              1      2482        60        120        no /var
              2         0      4092       8184        no overlap
              5      2542        13         26        no /opt
              6         1       256        512        no swap
          Usable space: 8182 MB (4091 cylinders)   Free space: 3074 MB
Verifying disk configuration
        - ERROR: The '/' slice extends beyond HBA cylinder 1023These are SCSI disks and I'm not worried I have already installed and booted with the default configuration and it worked fine.. But when I try to specify the partitions then I get this bogus check!
Does anyone know how to override this check and somehow convince it these are SCSI disks?

Error Message : Object does not exist (status management)

Hi Gurus,
I am working on tcode IW52(Change Notifications). and using badi's for validations at different points.
1. Order level,
2. Notification,
3. Task level validations.
In the task level validations, I have an requirement that if certain condition is met, than user should not be able to delete the task. I have no problem doing that, I am able to restrict it.
Now the issue is :
Say you have 6 tasks, and condition is met for the 5th task and I try to delete it. then the error message "can not delete task" is getting triggered from the badi.
and after this error message if you try to do any functionality on the 6th task, I am experiencing error message "Object does not exist (status management)".
Is anyone aware of this error message, any suggestions are highly appreciated.
Thanks in advance.
Shrikant
Edited by: Alvaro Tejada Galindo on Mar 17, 2008 1:56 PM

Hi ,
You have posted this question long back that is one and half year back nearly.
You got an error message in IW52 stating Object does not exist ( status management ).
Now iam also facing the same problem in iw22 transaction. Can you say me how you solved if you remember.

Error Message : Object could not be scheduled within the specified time interval

Post Author: mohamed elkashef
CA Forum: Publishing
Dear All when i try to run event for daily reports it sometimes take generation status failed with this error message : Object could not be scheduled within the specified time interval so i need to know the reason of failure and how can i fix this error thanks a lot

Post Author: nvnaresh
CA Forum: Publishing
Dear jsanzone,
I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
We are using BO XIR2+SP2.
I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
We have 3 such reports to be scheduled on the same event.
Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
This usually should work fine.
But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
Do I need to increase any server parameters?
Why is this happening randomly?

Log4j:ERROR Message object not configured.

while trying to use the SMTPAppender i got this message:
log4j:ERROR Message object not configured.
any idea?
thank you

It is unfortunte that this tops the Google serach
result for the subject text. It is message like this
that really pollutes all the good information that
are found in the web space. Message like this not
only perpetuates the "anti-social geek, I'm God and
you're not" stereotype, but also alienates the next
generation of aspired developers that this country is
so in need of.Did you register an account just to insult a pretty well-dedicated group of volunteers here? These people offer to help people they don't know with absolutely no benefit to themselves except to further the process of learning. Maybe there' s a warm fuzzy stemming from the fact that the person whose question was answered might have learned something.
If this is the type of asshat developer you would like to foster through the IT world, then you can try to put up with these people. People who are unwilling to communicate their problems do not deserve to have them solved. People who are simply attempting to skate by and be spoonfed through what's left of their mediocre careers can go elsewhere for help.
Thank you for your answer, and I admire that you posted here after you solved your own problem. Just leave out the cheeky, holier-than-thou diatribe next time. Go to Javaranch if you want to chat about Java and have your hand held while you bumble around.

I uninstalled Photoshop Elements 12 from my computer and now when I'm trying to re-install I'm getting an error message "Object already exist". Can anyone help?

I unistalled Photoshop Elements 12 from my computer and now when I'm trying to re-install I'm getting an error message "object already exist". Any suggestions on how to correct this?

jgbrph
If your program is Photoshop Elements 12, then you have posted in the wrong forum. Your thread is now in the Adobe Premiere Elements Forum (video editing).
Please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
While you are making your move, consider
a. what computer operating system is involved...if we assume Windows
b. have you checked Control Panel/Programs to assure that the program is no longer listed as an installed program?
If it is no longer installed, you might want to consider a free ccleaner run through (regular cleaner and registry cleaner parts) to get
rid of any leftovers from incomplete installs and uninstalls. Then reinstall with antivirus and firewall(s) disabled.
ATR

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport

Trying to download iTunes 11.1 but it keeps giving me an error message saying: The feature you are trying to use is on a network resource that is unavailable.

Trying to download iTunes 11.1 but it keeps giving me an error message saying:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "iTunes64.msi" in the box below.
Use Source:

iTunes.msi
Perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I am trying to change my Apple ID. Try to do this I keep getting an error message saying 'This email address is designated as your rescue email address and cannot be used as your Apple ID or Primary email address. Please choose another.' The email address

I am trying to change my Apple ID. Try to do this I keep getting an error message saying ‘This email address is designated as your rescue email address and cannot be used as your Apple ID or Primary email address. Please choose another.’ The email address that I want to use did use to be my recovery email but I have changed it, so that address is no lonegr associated with my account. I do not understand why I cannot use it as my Apple ID now. Can anyone help?

Contact iTunes customer support for assistance.

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

Getting error message "Could not create work area" when I open Bridge CC.

I am getting an error message "Could not create work area" when I open Bridge CC.
I have reset my workspace. I have closed and opened Bridge CC. I have deleted the !!-$$$AdobeOutputModule.workspace file in /Library/Application Support/Adobe/Bridge CC/Workspaces folder.
I am not an expert computer user, so please explain in detailed steps like I am 5 years old. Thanks in advance for any help.

I am experiencing the same problem!
My mac is OS X Yosemite (10.10.1), Photoshop CC 2014.2.1, Bridge CC 6.1.0.115 and Camera Raw 8.7.0.309

Modify Application: Error Message:: Object Variable or With Block variable

Hi Experts,
We just installed 5.1 on our server and once the application is installed.
When I try to modify the aplication I get this error at the end
This is step what the modify app does:
Check environment information
Drop Fact table index.
Modify fact table.
Update application information.
Set Fact table index.
Create stored procedures and comment table.
Increase application version and make legal consolidation table.
Make OLAP database and Journal/Audit reports. / Validate dimension formulas.
Error Message:: Object Variable or With Block variable
Any one has any any answer ? I will appreciate your help on this.
Thanks

Please check if Reporting Services is working properly.
Just open IE and type http://nameofserver/reports
If you receive any error then you have to fix that error verifying configuration of RS.
If RS is working make sure you add the right information into Server Manager Server Option for RS and Report Server virtual directory.
Also please check the tblappsetinfo to have all the fields completed (regarding servers).
Regards
Sorin Radulescu

Error Message: Objects Extending Beyond Addressable Area

Similar Messages

Maybe you are looking for